Auto Zone K&N Air Intake Install & Cleaning | 2015+ Chrysler 200 2.4L

Whats up guys well here it is the video explaining how to clean and install your Auto Zone air intake this video will show you that you don't need much to get a ram intake on your 200 and how easy it is to maintain!
LIKE COMMENT SUBSCRIBE !!!!

[@michaelperry8936]

Man ur an icon I have a Chrysler 200 as well I messaged u on Insta about it with pics

[@moderatemods98]

Hahaha thanks man ! I’m just trying to stand out bro I’m a KZbinr for the people 🔥💯

[@ykggrizz872]

Could you link the part for the Maf adapter my sensor is in the front

[@crystalmiranda1962]

1st comment 🔥👀

[@moderatemods98]

Always showing love thank you ❤️🔥💯💪🏽

[@chrissanford1007]

What did you do with the sensor that came out of the old filter

[@estevanramirez]

Bro just did this and it came out cleans AF! The sound! The power ( the kick ) the only thing I did different was it running a spectre intake and the space I used a 3 inch exhaust pipe it all ran me about 43 bucks and that’s including the oil/ cleaning kit. I’m just wondering if you know how I can increase more of the speed in the car

[@moderatemods98]

Hahaha I appreciate that bro 💯, and man there is tons of things are you on a 200 bro ?

[@estevanramirez]

@@moderatemods98 yes sir and I had another question so I the the intake is, is it sucking in a lot of hot air than before or should I get it done how yours is now? And if she where can I get that kit?

[@moderatemods98]

So basically bro the kit I have now is the injen and I’ll be honest it’s sooo much better I actually feel a total difference, that kit I have a link to in the video I recently dropped on the install , but I also have a video on a universal heat shield that I put in my old set up and that has a link too , if you aren’t ready to upgrade to the injen just yet try out the heat shield just to block out some of the heat bro ! Also there is more CAI’s but you just have to make sure that it does or doesn’t have the MAF depending on what your 200 has mine doesn’t have the MAF sensor so I went with the Injen kit !

[@estevanramirez]

@@moderatemods98 is this mod considered a SRI OR CAI?

[@alazar101joz4]

Got my charger kn filter from pick a part with the shield for $15 🙏🏾🙏🏾🙏🏾🙏🏾 but really make a vid build your custom divider with a scoop underneath to bring air up without down piping

[@alazar101joz4]

Love when you can hear it suck in the air upon shut off 👂🏽👂🏽👂🏽👂🏽

[@moderatemods98]

Alazar101 Joz bro that’s amazing and thanks for the advise I really need to get something made just wanted to make something quick for people to see it is possible lol !

[@ceestew6199]

Which filter did you get?

[@sipnscoot3049]

Man. If I were you, I would rerun your auxiliary wires around the fenders of your under hood area. They’re laying in bad hot areas. They could melt. Just a fyi

[@josiahhutt9973]

Is it worth it? Did you get any extra hp with it ?? Does it matter if you got the stock pipe on there?

[@moderatemods98]

It’s only like a 5 or so hp gain bro not much at all , really helps with throttle and pulling , you do feel a little difference and also you hear it ! No the stock intake pipe is fine won’t do anything at all ! It’s pretty much a cheaper set up compared to a full kit !

[@theonlylavadog14]

What did you do with the sensor connected to the air filter?

[@moderatemods98]

My sensor isn’t by there so I didn’t have to do anything bro but autozone and those places do sell MAF Adapters so it’s still doable lol and if you need to get that you won’t need a spacer because it’s a tube too ! Lol sounds weird , but if you can’t find it hit me up on insta and I’ll show you what I mean ! “Moderate_mods” 💪🏽💯🔥

[@animetropaz9451]

I have question I installed it all how you did but my cars Check engine light went on? Would you happen to know why

[@DrewGrimy]

probably because your car isn't meant to have a intake

[@retro2k874]

how much did yu get yur cold air intake from

[@moderatemods98]

Retro 2k got mike from autozone and bought a spacers from there and installed it bro In all it cost about 65$

[@codyboisver3985]

Can I do this on my 2013 Chrysler 200 2.4

[@moderatemods98]

Absolutely make sure your MAF is okay and safe, and if not get an adapter!

[@LuvboatWizz]

What is the exact name of the spacer or adapter having trouble finding it ?

[@moderatemods98]

Let me send a link !

[@moderatemods98]

This is what I use and I just kept the black plugs in it 🔥💪🏽💯 shop.advanceautoparts.com/p/spectre-universal-vent-port-and-vacuum-sensor-adapter-87071/11412988-p?c3ch=PLA&c3nid=11412988-P&adtype=pla_with_promotion&product_channel=online&store_code=&gclid=CjwKCAjwrKr8BRB_EiwA7eFapnm-L7wpiaBIBwM1TOurmHZS6eIRQVcC8LMTU0H3Uap-p7g7E0JjVBoCHr4QAvD_BwE&gclsrc=aw.ds

[@LuvboatWizz]

@@moderatemods98 appreciate it bro keep putting for the 200 fam 💪🏽💪🏽🔥🔥

[@dammitanothername]

also on amazon- adapter, filter, and clamps

[@Gabortrontv]

@@moderatemods98 the link is not working

[@rolandtrevino3481]

Why isn’t your maf sensor connected

[@moderatemods98]

My 200 doesn’t have the MAF On the intake tube bro !

[@carljean]

Is it 3.5inch or 2.5inch?

[@moderatemods98]

3” CAI Cone

[@anthony5997]

@@moderatemods98 u said 3.5 in the video???? What diameter would I need for the cold air intake and spacer?

[@nolove5062]

How did you put the adapter with out the mass air flow sensor

[@moderatemods98]

Mine comes with no MAF, if yours does try the MAF adapter tubs they sell at auto zone, advanced auto, ETC. might solve the problem bro!