Autodesk Revit Dynamo: Getting Bottom of Pipe

[@solamour684]

Awesome stuff man! Very easy to follow, clean description.

[@mohammedmahboob5764]

Sol Amour Thank you, I am glad you liked it.

[@johnm360]

I was able to get the invert parameter added to the pipe tag. The key is having the Project base point set where you need it.

[@susandarkyaw2593]

May I know how to create shared parameter file for Bottom of Pipe, please?

[@routtookc8064]

Many many thanks for the instruction and demonstration.! I am in the US with feet and inches, how can I have the output value round to the nearest whole number?

[@mohammedmahboob5764]

routt ookc Thank you for the comments, much appreciated. Using the math.round you can achieve the result. If any trouble drop me a line at [e-mail]

[@amrmaherali]

I Mean to attach Support element to the duct and also support rod attach to slab

[@tuitam2880]

Could you look at my problem , I have Warrning: Warnung:Element.SetParameterByName fehlgeschlagen. Der Aufruf unterscheidet nicht eindeutig zwischen den folgenden Methoden oder Eigenschaften: (No difference between two methods or properties) Revit.Elements.Element.SetParameterValue(Autodesk.Revit.DB.Parameter, Revit.Elements.Element) und Revit.Elements.Element.SetParameterValue(Autodesk.Revit.DB.Parameter, string)

[@mohammedmahboob5764]

+3plecaki.blogspot.com Let me know with the latest build of Dyanmo if you're able to achieve the result.

[@franciscomomo5491]

you can use the elevation and set it to bottom elevation. very easy

[@ravipatil326]

Hi, Did everything as per explained. Finally an error pops up saying- "Warning: Element.SetParameterByname Operation failed. No parameter found by that name." Can you please help me solving this?

[@mohammedmahboob5764]

ravi patil: Did you solve? The naming of parameter.

[@ravipatil326]

Mohammed Mahboob yes.. figured it out.. thank you

[@vedaa1861]

Hello I have same problem but m not understand how figure out can you explain please?

[@pruthvidurgam5008]

Hi Bro, How can I get that Definition which you used in Dynamo to get BOP..? Could you please provide me or guide me regarding it

[@mohammedmahboob5764]

It's a simple definition to make follow the video and you should be able to do it quickly. Let me know if any.

[@mohammedmahboob5764]

Download link to the file www.dropbox.com/sh/74p86ockamawxrh/AADAwpImBm0rpu237JKU4_3da?dl=0

[@thinmyatnoe8206]

@@mohammedmahboob5764 Hi, could u please provide the link again as its expired. Thanks.

[@Thommynat0r]

but if someone changes the pipe without running Dynamo again, the tag still have the wrong value, right?

[@mohammedmahboob5764]

Stan4Life2 the routine has to execute every time, when there are any changes to the model.

[@Thommynat0r]

Mohammed Mahboob autodesk should make it possible to bake the dynamo script into the tag...

[@DaveBaldacchino]

Stan4Life2 Autodesk should get their act together and build this functionality in the program because it is fairly industry standard to need this information on drawings. It is completely ludicrous to have to jump through these hoops to get necessary model data!

[@Thommynat0r]

Dave Baldacchino look here: www.freshpatents.com/-dt20150402ptan20150095881.php but it will be not implemented in the near future, unless a lot of people request it clearly

[@mohammedmahboob5764]

Stan4Life2 Thank you for the source, i hope there're some plans from Autodesk using Dynamo Studio: www.autodesk.com/store/dynamo-studio Additonally Alexey Lobanov has came with this wondertool addon, Dyno which execute the Dynamo workspace: dyno.arcprojects.ru/

[@santhorathi]

Hi, Tried this as per your instruction, but while run the program I am having the following error, please help he to resolve. "Warning: Element.SetParameterByname Operation failed. No parameter found by that name." (Total 3 times)

[@mohammedmahboob5764]

Have you able to resolve the error? Apologies for late reply.

[@santhorathi]

Dear Mohammed, Thanks for your reply, Unfortunately still cannot resolve it. And as an expert, can you give me your valuable advise, how can i start to learn this application. I really no idea where to start from. But I am too much interested to learn this Dynamo. Looking forward to your reply. And apologies for my late reply.

[@mohammedmahboob5764]

I am not really an expert, all i can advice is the community out there for Dynamo is sharing very fantastic work. Get in touch with me via Email: [e-mail] i can help you to resolve the issue.

[@vedaa1861]

Hello I have a same problem but m not understand how to figure out it. can you explain please?

[@mohammedmahboob5764]

What's the problem?

[@javiermendez736]

greate video, but i have a little problem, i can´t find the node (convert between units) and i get a error

[@mohammedmahboob5764]

+Javier Mendez Convert between Units is implemented with Dynamo 0.8 and further builds please make sure you install the latest version.

[@amrmaherali]

Mr Mahboob can you make a duct support by dynamo ?

[@mohammedmahboob5764]

Amr Maher Ali it's the same logic you just change the element type to Duct and replace parameter.

[@amrmaherali]

nice work but i have questision after i finsh that dynamo file how can i give to some one he dont have dynamo program we need to convert to addin file can we. thanks

[@mohammedmahboob5764]

Dynamo is free so anyone can download and use it, where as if it's an addin might be someone will put cost to it based on how complicated is the code. I would encourage to download and use dynamo, i am not aware at the moment that dynamo has this functionality to produce the definition as a dll.

[@amrmaherali]

Thank you for answer and i hope you make vedio explane the comand how can you did it it is beter

[@johnm360]

Noob Question: How do I get this to ignore pipes that are in groups?

[@mohammedmahboob5764]

You can filter the pipes in the group or add custom parameter to filter the information.

[@johnm360]

SO DYNAMO CAN DO NOT FILTER THIS FOR US? I guess?? damn caps

[@zooma47]

thank you for the video

[@mohammedmahboob5764]

Appreciate your time for looking into the video and commenting.

[@guillermogarciapedraza872]

Nice video. However, it won't be an option if you need the BOP from the FFL and you have floors with offset. Pipes BOP refers to the level, not to the FFL.

[@mohammedmahboob5764]

Guillermo García Pedraza Thank you for the comment. Put the logic which is to substract the information from level?

[@amrmaherali]

my dear can you make duct support

[@mohammedmahboob5764]

The concept is same for the Pipe, Duct & cable tray, you just need to use the correct attributes associated to it.

[@raoufbelal4293]

Dear Muhammad, I need your help for my first Dynamo plugin for Revit. How can I contact you?? This is important issue for me please. Thanks. 😊😊

[@mohammedmahboob5764]

Sure, I can be reached on [e-mail]

[@raoufbelal4293]

+Mohammed Mahboob Perfect, now I will send you email explain my issue. Really thank you. 😊😊👍👍👍

[@raoufbelal4293]

Hello Muhammad, Is there any method to make this plugin capture a specific level which I determined it? Thanks

[@jakkrinanakkerd8393]

Thanks So Much

[@rajeshwarnannegari5206]

VERY GOOD,Can you please send this BOP dyn file to me

[@mohammedmahboob5764]

Sure, drop me you're email Id.

[@rajeshwarnannegari5206]

@@mohammedmahboob5764 ji My email id is [e-mail]

[@mohammedmahboob5764]

@@rajeshwarnannegari5206 Download link to the file www.dropbox.com/sh/74p86ockamawxrh/AADAwpImBm0rpu237JKU4_3da?dl=0