Thanks for the great video. I did some research on this (being a complete amateur) and read that on T5.1 (2010-2015) the diesel filter should to be filled completely first from VF port, because its a common rail engine and they dont like air in fuel system. I filled it until spill over before removing the old filter and when the new one was fastened to place I filled it again until spill over. Then no problem with the starting. I tried the priming once, and then started it and no problems 👍
@autodocuk Жыл бұрын
We're sure your comment will be helpful to many of our viewers.
@jacooosthuyzen9732 Жыл бұрын
I'll try that.
@jake-lx4eu6 ай бұрын
Did you put some diesel in a bottle or something to fill it up?
@warp-mode6 ай бұрын
@@jake-lx4eu Yes, I had a jerrycan with diesel in it and a small funnel. By the way, I tried the priming only once and then I accidentally turned the key too far and the engine started. But it is recommended in the video to do more than 1 priming.
@jake-lx4eu6 ай бұрын
@@warp-mode thank you for the quick reply sir!
@THLLS-ej2tq Жыл бұрын
That's a big help. Thought I was going to have to crawl around underneath like a bug again😊😊😊.
@autodocuk Жыл бұрын
We are glad that this video was useful to you!
@יוסירוזנפלד-ס2ו3 жыл бұрын
Mistake. The new filter must be filled with diesel or an injection system cleaner additive before reconnecting because otherwise there will be an air pocket and it needs to be drained
@autodocuk3 жыл бұрын
Yes, you are absolutely right and we will definitely take this into account in our new videos. AUTODOC
@santaloveseivind9784 Жыл бұрын
No you just need to prime and turn the engine some revoulitons,
@jake-lx4euАй бұрын
This is actually really easy to do. I pre-filled the new filter with new diesel by using a Lucazade bottle. Take the rubber caps off all the ports otherwise the air gets trapped. You can compare the weight of the old filter and new filter to see how much fuel you have put in. I did as much as I could be bothered to do. I then fitted it and turned the ignition on 20 times and waited 5 seconds. Van started no problem
@jacooosthuyzen9732 Жыл бұрын
How long do you need to prime the diesel filter for? I suspect I've done it for too short of time now my vehicle stopped idling and doesn't want to start up again. Any advice?
@autodocuk Жыл бұрын
It’s difficult to advise anything based on the description, we recommend contacting the car service.
@Sjutturaah3 ай бұрын
@@autodocuk Oh cmon.. Add a caption to the video informing people that you might need to fill the filter as per the first comment on this video suggests, its clearly a point of failure in this tutorial. The fact that the video is 3 years old and comments keep pouring in about this, yet you do nothing, You havent even stickied the first comment, lol.
@andyspeck13863 жыл бұрын
Great Video-Thank you👌
@Mechanic-lee8 ай бұрын
Hi , so does the 1.9 t5 have a guess pump in the tank to full up the filter?
@autodocuk8 ай бұрын
In this case, the auto has a booster pump in the tank.
@StiveStive-p1b6 ай бұрын
Super video merci
@paulovieira13512 жыл бұрын
Thank you 🙏 I will be do in my t5
@autodocuk2 жыл бұрын
We hope our videos helped you.
@HeavyDmechanical8 ай бұрын
Umm was the filter pre filled ? And do you just crank the key or just turn the ignition on
@autodocuk8 ай бұрын
The car is equipped with a booster pump; when the ignition was turned on, the filter was filled with fuel.
@seppoahola52545 ай бұрын
Great 👍
@wyndhamwhitfield19702 жыл бұрын
Thank you
@alexey99004 жыл бұрын
Good 👍👍👍
@paulrogers15362 жыл бұрын
Thanks
@martinriley28803 ай бұрын
How do you bleed the air out then
@autodocuk3 ай бұрын
You can find this information in the technical documentation for vehicle repair.
@urimcocaj29303 жыл бұрын
Thanks man
@Newnameinheaven2 жыл бұрын
Perfect.
@autodocuk2 жыл бұрын
Thanks for your positive comment! Stay with us!
@mariusvanniekerk77072 жыл бұрын
Alright then, how do I get the air out now that my vehicle died? Guess I'll try to fill the filter and hope for the best.
@autodocuk2 жыл бұрын
Unfortunately, we do not have such information, we recommend that you consult with your mechanic. AUTODOC
@theyorkshireman39062 жыл бұрын
Fill with diesel at the VF port or a bottle of injector cleaner.
@daniellunn7992 жыл бұрын
Isn't that why he turned the key to ignition a few times to prime the filter 🤔
@AndrewKeil-t1z Жыл бұрын
Thanks. Started perfect
@FedupwiththeBS2 жыл бұрын
👏🏻👍🏻
@Keith-w8p4 ай бұрын
No mention of bleeding the system
@autodocuk4 ай бұрын
This video contains only tips and recommendations that may be useful when performing car repairs or replacing parts. This procedure is carried out in different ways on different cars. To achieve the result. you can familiarize yourself with the procedure in the repair manual for your car.
@hallbetlehem607 ай бұрын
😊
@erik.landen3 жыл бұрын
In a video from 2017 you guys admit in the comments that the filter needs to be pre filled. This one kzbin.info/www/bejne/n52XhIGJhsx4pbc Why make a nearly identical video if the first one had wrong information?
@autodocuk3 жыл бұрын
You are right, this method will allow you to bleed the fuel system faster. If you turn on the ignition in the first position for a few seconds, the filter will fill, as in this video