Replacing Gauge Cluster Lights with LEDs - 93-97 Toyota Corolla

[@user-ee8ht3fh4p]

For those of you who have an ae102 like me, the blue plug is for the lights.

[@AutoFixYT]

Thank you for adding the info!

[@charlotteramsey6680]

thank you sm

[@juliovelez400]

@@AutoFixYT question sir. Any suggestions for the dead zone around 60-85ish? It bothers me in mine lol

[@AutoFixYT]

Sounds like a bulb has gone out. Needs to be replaced.

[@user-ee8ht3fh4p]

@@GlennC789 If they're led bulbs, they could be put in backwards, or it's more likely that the pins aren't quite touching and need to be bent a little more.

[@braddabug8598]

I just did this in my Corolla. I was able to do it without unplugging the power connector, which made it go much faster. Thanks!

[@AutoFixYT]

Nice work, I'm glad you found a way to make it easier.

[@preshandpereira4035]

I just changed my gauge cluster lights today with the instructions shown in this video. Was extremely useful. To those who have the JDM AE101 Corolla that has the speedometer till 240km/h, there is one difference, the no of LED bulbs excluding the fuel warning light is 4 instead of 3 Other than that it is the same. Thanks again Auto Fix

[@martinhernandez628]

Thank you for this video . I love 93-97 corollas . This way very helpful .

[@AutoFixYT]

Thanks!

[@Jeremy_Hill_2020]

this gave me ideas lol now I want LEDs in my taillights, clear turn signals (when they arrive), the lights right beside the LEDs in my headlights, & LED interior lights

[@AutoFixYT]

Nice, that's exactly my setup. All LEDs except for turn signals. For brake light bulbs I suggest LEDs from SuperBrightLEDs.com. They're expensive but after years of buying many different LED bulbs for brake lights, I have come to the conclusion that those are the best.

[@toto72_]

Thank you ! It helped me for my 1994 starlet

[@AutoFixYT]

Glad it helped!

[@user-cq7jx9vi5o]

Your are professional macanic✋ love from Pakistan🇵🇰

[@AutoFixYT]

Thank you!

[@frankli8881]

Wow! This car is easy. I did the same thing to my 2000 Toyota Avalon a few months ago. I had to remove a lot more panels before I could change the bulbs.

[@AutoFixYT]

Yup, it's the same on the Camrys, lots of stuff has to come off

[@trevorwakefiel870]

Thankyou as my Australian made AE101 toyota Corolla Seca CSI auto hatch console bulb needs replacing. Auto glove also needs new globe. Thanks for easy replacement explanation steps to replace.

[@hacielchayra4181]

Great videos man , I just ordered my led bulbs for my Corolla , I know its going to look awesome, thanks you so much ! 😊

[@AutoFixYT]

That's awesome! I'm glad the video was helpful!

[@loden888]

Very clear instructions, thank you!

[@AutoFixYT]

Thank you!

[@Pallidus_Rider]

❤️ Corolla content ❤️

[@pc3019]

2:58 Wow, your mileage is 333395 miles. Corolla never dies!!

[@AutoFixYT]

Yup, I'm at 340k right now. And you're right, Corolla NEVER dies haha

[@TehAuroraWolf]

yeah, mine has 226000 and runs like a dream. Just gotta do this light fix so this video is perfect!

[@AutoFixYT]

@@TehAuroraWolf Nice! Keep it going!

[@StarlitStreets]

We have a 90 Corolla on its 3rd odometer, og engine. We assume after talking to one of the old owners that its about 375,000-400,000 miles. They seem to last forever 😂

[@jaimepastor1871]

Thank you for this video! I have to do the same thing!!!👍👍👍

[@AutoFixYT]

Glad it helps, good luck with your install!

[@Typicalpnwguy]

Perfect instructions. Thank you sir!

[@david.chilin]

Very helpful even for my 2007 Corolla thanks

[@AutoFixYT]

Glad it helped!

[@JayeLeli]

I wish my AE92 gauge cluster is as easy as for AE101 to remove from the dash haha! I need to take off tons of screws before finally pulling out the gauge cluster.

[@AutoFixYT]

Yeah they're not all this easy unfortunately... but at least you figured it out!

[@ywn_.brandon7]

Hey man where did you get this cluster?

[@AutoFixYT]

Nowhere, it was a factory option on sedans and came standard on wagons.

[@sabatamoabi4051]

awesome. you make it look so simple

[@AutoFixYT]

It's pretty easy. Just have to have patience to remove all those pieces that are stuffed behind the steering wheel haha

[@sabatamoabi4051]

@@AutoFixYT do u hv an idea as to why Gas gauge as we all as the heat gauge (if it is called so) might give false readings? where cn I send u a pic of what I am talking about

[@AutoFixYT]

@@sabatamoabi4051 You can message me on Instagram. My username is autofix.cris

[@Pallidus_Rider]

Curious if you have video for your Lexus GS dash

[@AutoFixYT]

I don’t and I do plan on making one. The cluster on those GS models is lit up by a more rare type of lighting in the automotive world, CCFL lights. They’re not individual bulbs, they are tubes filled with gases that in the end emit light. This is why the backlight is so even across the gauges. They’re not individual bulbs. And because of this it is very difficult to replace them with LEDs. Not just the procedure itself, but then you have to customize the whole inside of the gauges so the light from the LEDs can be evenly dispersed across. Otherwise you end up with very blotchy lighting and dark areas. Not something I’d want to do. If I ever have to replace the lights, I’m sticking with the original type of lighting that is in there.

[@MrDdog678]

Hey I’m currently following the tutorial, don’t know if the previous owner of this car did this already.. however when I try to pull out the older lights from the brown twister it’s very stubborn to come out. Was there a way you “unlocked the bulbs from the holders? Or do it have to pull harder.

[@AutoFixYT]

You just have to pull harder. In the past on other Toyotas I have had to use pliers and gently tug on the bulb while holding the socket with other pliers.

[@MrDdog678]

@@AutoFixYT thanks for the hasty reply, i tried that and the bulb shattered hah (i'm alright no cuts). is it the case of where the bulb is soldered in? it feels like it would've already came out with some wiggling if it wasn't

[@AutoFixYT]

@@MrDdog678 Maybe they're soldered in? I've pulled those out of several Toyotas and I've never had one not come out

[@MrDdog678]

@@AutoFixYT upon further look, no clue what held them in so tightly.. however i opted to put on some gloves and remove the old bulbs by chipping away at them.. that worked out pretty well and the new LED bulbs you recommended here in the video fit and work great! thanks for the help. P.S. I've opted for full green interior lights and it looks great.

[@AutoFixYT]

That's awesome!!

[@shahriarrashid8478]

Hi, your video was very much helpful. Could you please tell the part numbe / bulb type number (T 10, T3...) of the bulbs that been used in the meter cluster? As far as I know there are 3 types of T bulbs.

[@AutoFixYT]

Thanks! They are 194 bulbs.

[@shahriarrashid8478]

@@AutoFixYT All of those are 194? After opening the meter cluster I found those bulbs in 3 size variations. How to identify these variations when placing order online?

[@AutoFixYT]

The ones that provide the backlight when you turn on your headlights are the biggest ones, they have brown connectors/sockets, and they are 194 bulbs.

[@shahriarrashid8478]

@@AutoFixYT Thanks

[@anastasiostongas8217]

I have a corolla '94, these cars were meant to last forever! Very interesting your videos. Can you still adjust the brightness of the leds from the console like the original ones? Thx

[@AutoFixYT]

Yes I can still dim them!

[@deanwagher1944]

I came to ask this very question!

[@khalid8813]

hello again man , any advice for broken glovebox its broken wont open been searching for any tip .

[@AutoFixYT]

@khalid8813 broken because the latch is stuck? Or it's locked and you don't have the key? Or the latch is broken...? Different solutions for different problems here lol

[@khalid8813]

@@AutoFixYT mine is without a key , i think its broken or stuck!!

[@albertomadrid940]

What about the other little bulbs, they didn't need to be changed??

[@AutoFixYT]

No. Most of the time those are ok. All those small ones are just for the various indicators on the gauge cluster, such as high beams, turn signals, seat belt, air bag, check engine light, oil pressure, etc. Those are not worth changing to LEDs because they usually not even on.

[@albertomadrid940]

@@AutoFixYT Thanks man, really appreciate the answer, awesome content you are making

[@kennethfabreag7889]

Does it have fuse for dashboard lights? because it is unusual that all bulbs have failed at the same time

[@AutoFixYT]

Yes there is a fuse. I don't know which one it is though, you'll have to look for it. Might be in the driver's side kick panel fuse box.

[@nickhayley]

Question: do the led lights dim?

[@AutoFixYT]

Yes they do!

[@nickhayley]

@@AutoFixYT wow! I didn't think they would! Awesome

[@thomaschristopherwhite9043]

Can you still dim down the brightness with the little scroll wheel on your left?

[@AutoFixYT]

Yes i can. If you use good quality bulbs you should also be able to dim them.

[@thomaschristopherwhite9043]

@@AutoFixYT Awesome! Thank you!

[@KreissonMacasinag]

Did you replace your relay?

[@AutoFixYT]

No

[@anas7731]

well that was really helpful though but how can we replace the tiny needles of cluster of ae101 i want to replace needles bcz u can see that needles light are not looking good as compare to to whole cluster how we light up the needles for example i want to light it up in red color

[@AutoFixYT]

The needle lights up through the light that lights up the whole cluster, that's the only way to do it

[@ajscarreviews9330]

How are these bulbs holding up?

[@AutoFixYT]

Really good actually, still going strong!

[@EivinSukoi]

Didn’t see you removed the Speedo cable ??.

[@AutoFixYT]

There is no speedometer cable. It's electronically controlled.

[@EivinSukoi]

@@AutoFixYT k

[@JesusMartinez-vh7zy]

Helpful brother..

[@AutoFixYT]

Thanks!

[@Sinceare1234]

is that cluster OEM or did you get it from somewhere else? I'm looking to replace my lights as well as the cluster for my 96 corolla.

[@gavinauger4886]

Was there a trick to take the original bulbs out of the brown piece? Mine won’t come out

[@AutoFixYT]

Force and no fear lol that's about it. Wiggle and twist too, that might help.

[@gavinauger4886]

@@AutoFixYT force it is then haha thank you

[@AutoFixYT]

@@gavinauger4886 haha you got this! I don't know why Toyota secured them so well from the factory.

[@drgoodspd6382]

Mine are the same, they don't come out. The bulbs are connected by tiny wires on the side.

[@drgoodspd6382]

95 Camry

[@asta9198]

It has 33,3396 Miles on the car. Really impressive!!!

[@AutoFixYT]

Thank you, and thanks for watching!

[@kandaharenglish2595]

Bought one few days ago with 255k miles but extremely well taken care of inside and out

[@AutoFixYT]

Nice!

[@poppinfresh5261]

do the LEDs affect anything with the car? or is it just basically so insignificant that it doesn’t hurt anything just looks better?

[@AutoFixYT]

LEDs don't affect anything. You can swap any bulb you want for LEDs and nothing bad will happen, except for the turn signals. You will get hyperflash. Any other bulb will be treated the same as a halogen by the vehicle. I have swapped every single bulb in my car to LED besides the cigarette lighter plug and the turn signals, as well as the dummy lights in the gauge cluster. Everything else is LED. They make the car look a whole lot better in my opinion.

[@nuwanthilina4940]

Hi! My car has an issue with the speedometer and RPM meter. They do not show correct speed and RPM. But odometer works fine. It shows the correct distance. Can u help me with this issue?

[@AutoFixYT]

I can't really tell you what exactly is wrong, but check all the wiring connections to the gauge cluster. Make sure the circuit board isn't broken or burnt. It could be that the motors that move the gauges aren't getting a signal. I don't know how to help you more than that. I may be worth it to just get another cluster from the junkyard that works and use that. You can roll the odometer to match your mileage.

[@biggmonster714]

I went through all the comments no one has asked yet will the same size bulbs work for the turn signals? Or is it a different size?

[@AutoFixYT]

It's different. Both front and rear turn signals bulbs take an 1156 bulb

[@biggmonster714]

On the cluster?

[@AutoFixYT]

Oh I'm sorry hahaha I didn't know you were referring to the cluster ones... my bad! I have no idea what size bulbs those are, they are the type that come with a socket and you twist them onto the board.

[@spikes2009c]

Is it also possible to change the cigarette light? If possible can you make a short video please?

[@AutoFixYT]

I will look into it. I don't think I ever changed mine.

[@spikes2009c]

@@AutoFixYT Thank you and stay safe !

[@preshandpereira4035]

Hey man thanks for the useful video. I was wondering if the same rules apply to the right hand drive version. Planning to do this soon. Thanks

[@AutoFixYT]

Yes should all be the same!

[@preshandpereira4035]

@@AutoFixYT Thanks a lot

[@freddygarcia709]

Muy bueno el video , seria excelente en español

[@OLPClan]

Great fix bro i was wondering if you could help me fix the centre console lights for the aircon switches mine has died 😢

[@AutoFixYT]

Sure, I'll try and get a video out on that this week or maybe next week at the latest!

[@OLPClan]

Auto Fix thanks so much ☺️

[@shivanfulchan5502]

Ae111 whats the bulb model needed??

[@AutoFixYT]

194 bulb

[@davidlow6529]

Will it be the same to replace the LED for Honda?

[@AutoFixYT]

No

[@romeochellah4003]

My temperature gauge is not working but when test on battery it works help how to wire it up

[@AutoFixYT]

Maybe your coolant temp sensor is bad

[@e.stgo.7998]

Thank you for shearing 👍👍🇵🇷👍👍

[@e.stgo.7998]

Oh wow!!! Didn't expect an answer so fast 👍👍👍👍👍 I did verify the LED's at link provided and they're not available. My cluster is different 1993 Toyota Corolla 1.8l 7A-FE, no RPM GAUGE (tachometer)and I'm wondering if you could make a vid for that swap. 👍👍🇵🇷👍👍

[@AutoFixYT]

Unfortunately I can't make a video for the swap because I don't have a car that doesn't have the tach. It would have different wiring so I can't swap a non tach cluster in mine either just for the video. The bulbs should still be 194 bulbs. If the link says they're not available, here are some other ones you can buy: www.amazon.com/dp/B07G312DR2

[@totorajab1097]

Cool where do i get one

[@AutoFixYT]

Where do you get what?

[@cesarbanegas1282]

Excuse me, do you know why a little shadow appears within 2500rpm and 80 miles? With normal bulbs and with LEDs, that shadow is always present

[@AutoFixYT]

It must be something related to how the light gets dispersed inside the cluster. If you feel like taking it all apart go ahead and see if anything is broken internally. Other than that I have no idea why you have no light in those areas even with halogen bulbs.

[@cesarbanegas1282]

@@AutoFixYT If friend is the strange thing, as if there was something that prevents the light from reaching that area, I will try to disarm to see what happens, thanks

[@ernestojaimejr8650]

I like how it has a RPM mine only has speed gas and temp I wonder if I can change it 🤔

[@AutoFixYT]

Yeah many people have commented that. I didn't know it was that rare lol. Mine is a DX trim but also a manual so I think the combination of those two make it so it has a tachometer

[@kionsutherland4363]

😮 bro thanks

[@AutoFixYT]

You're welcome!

[@_Shym4n]

Thanks man

[@treeman5590]

AE111 has green plugs for gauge lights.

[@AutoFixYT]

Good to know!

[@khalid8813]

Thank u man , just changed mine but not LED , i like the classic one I need ur help to change my antenna please man

[@AutoFixYT]

Awesome! I'm not entirely sure how to remove the antenna because I've never had to do it. I know there are two screws on the outside that you have to take off, but then you might have to take the plastic trim piece off the A pillar to unplug the antenna before removal. Not sure.

[@khalid8813]

@@AutoFixYT that is the easy part , i wanna know the wiring steps. Anyway i appreciate ur help 👍🏻

[@conanedogawa5461]

Awesome, really great video 👍, will definitely be doing this for my car, question can you do a video replacing the lights for the a/c panels and also the dome light with LEDs as well?

[@AutoFixYT]

Thanks! Yes I will be filming that this week and hopefully posting it by late this week or early next week. Stay tuned! :)

[@vincentrodriguez3260]

I have 3 connectors and 1 thick wire that goes to the speedometer. How can I remove the thick wire? Thanks.

[@AutoFixYT]

You can de-pin it or cut it. If you're not sure how to de-pin it just look up a video, it'll be easier than trying to explain in writing.

[@antonioc2017]

Do I necessarily have to disconnect the battery for this???

[@AutoFixYT]

No really for these old cars

[@anthonymagtanong3798]

Hey can I use a 74 led buld as well on the speedometer gauge? Same car model ae101. Thanks in advance!

[@AutoFixYT]

No, those will not fit. They only take 194 bulbs

[@ArjunKashyap-so8ow]

Bro where i can buy led lights

[@AutoFixYT]

Amazon, ebay, or other websites, even some stores.. A lot of places sell these. I suggest Amazon though.

[@robertodelacruz2927]

Hm is the panel board of toyota gli big body 96

[@alvaroagonzalez123]

Nice job

[@AutoFixYT]

Thank you!

[@ROCKMASTER-G]

Just watched this s video to help me change the bulbs on my 96 Corolla.i thaught it was gonna be a bigger job than it was ...thanks for the video...hey how do I calibrate my speedometer it's 3 to 5 mph slow ...

[@AutoFixYT]

I'm hapoy that the video helped! Indeed this isn't that bad of a job. As for the claibration, I honestly have no idea. My speedometer has always shown 5mph over at any speed. I never bothered to fix it lol

[@IhaveaDoghouse]

do you have 185/65r14 tires or are you using a larger tire like a 185/65/15? Larger tires cause your speedo to read slow but as far as calibrating it I also don't know. Between those two sizes it would be 2.6 mph difference reading in the speedo at 60mph.

[@AutoFixYT]

I use the stock tires for winter tires and I have 205/50R16 for summer tires. There is a difference in speed but my speedo is 5mph off with stock tires so it doesn't really matter to me anyway. If anything it kinda fixes it haha

[@bcmiller]

@@AutoFixYT Did you have any clearance issues using tires (205/50R16) that big?

[@AutoFixYT]

@@bcmiller Nope, no clearance issues. You just have to get a wheel with the right offset. Mine is +42

[@naqibhusseinyar4292]

Quick question: Can I upgrade my gauge cluster with the rev counter mine doesn’t

[@AutoFixYT]

Yes you can! It should be plug and play in you just get the cluster you want. There is also a way to take the cluster apart and make the mileage on the new cluster match the old one.

[@naqibhusseinyar4292]

Thanks a lot!

[@111soreal]

I tried it but the clusters/rev gauge didn’t work don’t know y maybe faulty

[@AutoFixYT]

Hmm... maybe I was wrong and you need to wire up the tach?

[@juliovelez400]

@@AutoFixYT if you have a 1.6 95% of the time it won’t work. If you have a 1.8 you should be a okay due to that’s the only model that came with the rpm as a option

[@mkr_ae101]

Bro i have changed the bulbs mine had 4 big ones and there is another one which is really small but has halogen or incondencent but i cant figure out which led size should i buy ... That bulb covers 140-180 on my speedmoter which is blank for now

[@AutoFixYT]

Not really sure since mine doesn't have that, my 4 194 bulbs lit up the whole gauge cluster.

[@mkr_ae101]

@@AutoFixYT ok so that mini was an t5 bulb replaced everything good to go, BUT the needles dont glow they dont catch the light... please share your instagram so i send you pictures

[@mrwetwild6930]

Does anyone knows where I cn find the pine out diagrams for the plug in for the clusters???

[@yaochihli2263]

who thinks that this is another chrisfix guy on the video... the voice? the way this video was trimmed?

[@AutoFixYT]

I like ChrisFix

[@yaochihli2263]

@@AutoFixYT hahaha, you sound just like him tho frfr

[@charlotteramsey6680]

thank you

[@AutoFixYT]

I'm happy the video helped!

[@charlotteramsey6680]

@@AutoFixYT I appreciate it haha

[@stoicspawn3936]

Hi dude, I just bought a 5 speed with 170.000km. What fuel do you recommend, premium?

[@AutoFixYT]

Awesome! Nope, regular is just fine. These engines don't take premium.

[@HectorHernandez-ks8gx]

Will this work for a Toyota Camry 1996?

[@AutoFixYT]

You can use the same bulbs but the process isn't the same. Similar, but not the same. Instead of the small bezel around the cluster you have to remove the whole face of the dashboard. So everything from the driver's vent all the way to the radio and heater controls is all one giant piece of plastic. Once that's off the cluster comes off the same way, 4 screws, 1 in each corner. Then you can replace your bulbs with 194 bulbs for the backlight. I did it on my 96 Camry Wagon but didn't film it. It was annoying to do haha

[@scotthornberg4807]

Nice job - I like the improvements you've made in editing. I budget about $50 a month for repairs/maintenance on my 98 Camry. What do you budget?

[@AutoFixYT]

Thank you!! I don't really budget a monthly amount for repairs. I just have some money set aside that I use whenever I need to repair something.

[@edwardjdm]

Do you happen to know if 194 bulb is also used to light up the shifter?

[@AutoFixYT]

As far as I know, yes. It should be a 194 bulb.

[@Grad3r]

Do they dimerable?

[@RickyRisnandar]

i believe they are not

[@AutoFixYT]

Yes these LED bulbs can still work with the dimmer

[@dec8706]

is that a size T10 bulbs? i plan to to this to my AE111

[@AutoFixYT]

Bulbs are 194 type bulbs

[@Pathfinding-earth]

are they dimmable?

[@AutoFixYT]

Yes they are! They work awesome.

[@bobbibitch7025]

So have a 93 corolla dash lights went out cause my stereo got ripped out n all those wires are now cleaned up but no stereo n no lights still?

[@AutoFixYT]

Start by checking the fuses and see if any of them are bad. There is a fuse box in the engine bay, and one underneath the driver's side kick panel. If any are bad, replace them with the correct amperage fuse. If that's not the case, check for power at all the wires that lead to your headunit and gauge cluster. If they have no power then I would keep following those wires and see where they lead. Maybe something is broken, disconnected, or not making proper contact. Definitely start with the fuses though. All of them one by one.

[@bobbibitch7025]

Auto Fix, bless

[@pierregro389]

Whats the correct Name for the Lights?

[@AutoFixYT]

194 bulbs

[@anthonydomingo5078]

Thanks bro

[@AutoFixYT]

You are welcome! I'm glad the video was helpful!

[@Leonardnl]

I chance my gauge lights already 2 times. And stil the middle light stop working after a few days :-(

[@AutoFixYT]

Maybe there's an issue in the circuit. Gonna have to test that out somehow

[@Leonardnl]

@@AutoFixYT thanks

[@martinhernandez628]

I love your videos brother . Very helpful and straight forward . I have a question about the rpm guage are they are on these corollas ?

[@AutoFixYT]

Thanks! I assume you meant is they are rare... I don't know! I think they are definitely rare on base models or automatics. This car being a manual transmission it's helpful to have the RPM gauge. It's also a DX not a base model. But I've seen many Corollas that don't have it. It's a good question though! I can't give you a good answer though, just a guess.

[@braydenbiondich6815]

@@AutoFixYT can you swap to a rpm gauge cluster?

[@AutoFixYT]

@@braydenbiondich6815 I've been asked this everal times and I never know the answer 100%. You can try, and hopefully the connectors match up and the wires are all there. But I don't know, I've never had to do it.

[@ruelbernardo1864]

Model of bulb?

[@AutoFixYT]

194 Bulb

[@albertomarcostrancoso6372]

Boa noite, poderia mandar o link de onde comprou estas lâmpadas (novas) ? Obrigado e parabéns pelo vídeo sensacional!!! Alberto, Vila Velha ES, Brasil

[@calxsilvergaming4610]

My needles don't get good enough light to glow. What can I do??? Not sure if the lights are right, they are T10 LED lights but idk about the 194 part

[@AutoFixYT]

T10 is the same as a 194. Use either and they'll fit.

[@calxsilvergaming4610]

@@AutoFixYT ahhhhh ok. Still the problem is there. The needles are very badly lit. I thought it could be the length of the bulbs since the LEDs are longer than the og bulbs, but I found some shorter ones and the needles still look like crap so... Idk what to do in this case. Might just go back to the normal bulbs

[@calxsilvergaming4610]

@@AutoFixYT the badly lit needles are only the RPM and speedometer needles. Fuel tank and temp look fine

[@AutoFixYT]

Very strange... Mine look good and actually are better with LEDs

[@eddiec4140]

Mr. Auto Fix: May I ask if the 194 LED you use is a two-chip or three-chip style? Thank you for your reply.

[@AutoFixYT]

The ones I used have two chips per bulb.

[@eddiec4140]

Can you tell me what brand, model, and specifications of the LED type you use, I need to know.

[@AutoFixYT]

I used 194 bulbs, bough them from Amazon

[@eddiec4140]

@@AutoFixYT Thank you very much for your enthusiastic reply. I would like to ask you how much does a 194 bulb cost? Thank you!

[@AutoFixYT]

@@eddiec4140 It depends which ones you buy. There are cheap ones and there ate expensive ones. I suggest you go somewhere in the middle, the cheap ones don't last. And the expensive ones are... too expensive haha

[@eddiec4140]

@@AutoFixYT I often like this type of selection, because there is no brand name and product number, so I can only check it by price. Thank you! (PS I live in a small country in Asia.)

[@joshualouismendoza2666]

Hi! Whats the size of the bulbs used in the gauge?

[@AutoFixYT]

194 bulbs, I said it in the video

[@joshualouismendoza2666]

@@AutoFixYT ohh okay, sorry, last question, do h know what size is the bulb in the license plate in the back? Thanks

[@AutoFixYT]

@@joshualouismendoza2666 That is also a 194 bulb. There should be two of them.

[@Earths_wonders]

Bro has full tank 😮

[@AutoFixYT]

I do, only a 13 gallon tank lol doesn't take that much to fill

[@tbrecords7042]

My old bulbs ain't coming out the socket

[@AutoFixYT]

Use pliers but be careful. They can get stuck if they are original bulbs.

[@angelicamariemurillo5914]

After changing the bulbs of my gauge cluster the fuel gauge of my toyota corolla big body drops empty and it wont rise up again where my fuel level supposed to be. Can you help me?

[@AutoFixYT]

Check for a bad connection. That means the gauge isn't getting power anymore. Maybe it just so happened to break right then but most likely it's not getting power. So take it all back out and get the cluster disassembled, and with the ignition in the "On" position, take your multimeter and check for power right where it connects to the gauge. If you do have power but no movement, that means the motor that moves the gauge is bad. If you have no power, then go down the line until you find where the signal is interrupted.

[@angelicamariemurillo5914]

Yeah you are correct! Thank you so much! 😊

[@AutoFixYT]

@@angelicamariemurillo5914 Awesome!

[@fanisavram1927]

light number is ?

[@AutoFixYT]

Bulb number is 194, I say it in the video

[@PriscillaBautista-yy6ew]

Got a question. What happens when you change the T5 bulb as well? Does it make any difference?

[@AutoFixYT]

No, those are not for the backlight

[@joelopez7459]

that's what happened to me, uneven spread. the fuel thing happened to me too lol

[@patrickphippspa584]

These dimable?

[@AutoFixYT]

Yup they're dimmable!

[@donaldduterte6804]

with the new led bulbs... is the control for the brightness still working?

[@AutoFixYT]

Yup, still works!

[@christophermetalhead5303]

I have an 03 Avalon xls and i just to change the bulb for the odometer. Does it matter about which bulbs i use or are they the same?

[@AutoFixYT]

As long as you use the right type bulb (194, 74, etc.) It doesn't matter whay brand or if it's LED or not. It just needs to fit.

[@JalenRose02]

I thought a 168 led bulb would work on this

[@AutoFixYT]

Yes it will work. But if you're installing a 168 incandescent bulb be aware that it may overheat in there since the 168 is higher wattage than 194. When it comes to LEDs though, heat is not an issue. And even the 168 bulbs will be marketed as 194 because they're the same size and base and 194 is the more popular bulb. Hope this helps!

[@JalenRose02]

@@AutoFixYT well mine wouldn't lit up and the plastic to put the led on is kinda lose. Idk what i did wrong

[@AutoFixYT]

Maybe the LED is not made properly? Or maybe your socket has melted and expanded over time. One of the two must be the issue

[@JalenRose02]

@@AutoFixYT its an oriely brand sylvania led mini brand new, um the sockets seems to be only working when the wires of the bulb was intact together.

[@AutoFixYT]

Ok so it's probably not the bulb... why don't you message me on IG with some pictures so I can see what's going on. @autofix.cris

[@qioz6607]

Idk how to do this on the 2011 Toyota Corolla

[@AutoFixYT]

I don't know either :) I don't have one of those so you'll have to find a video that shows it, or figure it out on your own. Toyotas are all very similar in design so there should be a plastic bezel around the gauge cluster, and then some screws or bolts for the cluster itself and that's it.

[@eddiec4140]

thank you! Let me have a choice.

[@naveedakhtar4133]

Brighter leds are pinching during long night drive, as of my experience.

[@AutoFixYT]

But you can use the dial on the left side of the steering wheel to turn them down at night

[@RavenousFallen]

The LEDs might burn out quickly if you attempt to dim them. Most of these cheap LED bulbs do not dim. You have to get special bulb from Toyota that can dim. Not that expensive... about 3 bucks a bulb.

[@AutoFixYT]

Yeah true but who ever dims them anyway lol. I'd rather replace LEDs more often than have incandescent ones

[@Joeyyyyzx]

I hate that my 97 Corolla didn’t come with rpm meter

[@AutoFixYT]

Yeah a lot of them didn't

[@bhanuka_janith_16]

Loving my 1991 civic ❤