Ultimate LS Engine Overview

[@AutoGuild]

I had many requests for a poster of this video, it is now available, perfect for garage or shop: teespring.com/ls-engine-history. Head over to Auto-Guild.com for a free LS Swap Survival Guide eBook, and other free eBooks, as well as posters too. Auto Guild fans have discovered a few corrections: 1) Trailblazer SS debuted for the 2006 model year, not 2005. 2) The Chevy SS sedan, aka Holden Commodore down under, has a LS3, it was offered from 2014-2017 (don't know how I miss this, one of the best sedans GM has ever made). 3) LY6, L9H, and L96 do not have AFM. 4) Its correct on the page but I verbally refer to the TR6060 as the "TR660", oops : ) 5) L96 is still being produce but only in Express van 6) The 6.0L iron block LY6 also had LS3 style rectangle port heads. 7) SS Camaro came out in 2000, not 2001 like shown. So far thats it, please let me know if you find any others and Ill post em here. Thank you for your support, please also check out my other video: *Best LS Engine for Any Budget*. kzbin.info/www/bejne/oZaqmmqkeJqbipo

[@Peder.Adamson]

There was a 5.3 option for the Trailblazer with the LT trim level, I’m not sure if the model years though. The TBSS had LS2 only for 2006-2009. (I think someone mentioned that already in another comment). Also, I understand this is a LSx video, but all 4 model years of the TBSS had a 4L70 behind it. The video graphics showed 4L65 at some points when TBSS was lumped in with the car. Great video! This probably took a substantial amount of time to put together all the information. And even more to keep it straight. Thank you for the one stop shop. For those that don’t know: LSX = aftermarket block LSx = referring to the LS family with no specifics. LS1, LS2, LS3, LS6 etc... (Sorry, it’s a personal pet peeve lol)

[@willracer1jz]

As an SS owner I was able to to complain.

[@commyfarknmang9478]

Yea every body to every chevy ss or commos was made around the corner from me in Adelaide here

[@TransAmDude8806]

Also, the Saab 9-7x Aero had an LS2 for 08 and 09. It, the TBSS and SSR were the only truck applications for the LS2

[@Polaris88Reid]

I would only build a iron blocks 455 454 305 small blocks and there all iron . Here’s Inside the 455 Cubic Inch Big Block from General Motors There's no comparison in question that 455 with a quad barrel carburetor huge displacement equal a big motor and a easy 8 second build . Nevertheless, this giant engine from the General is a little mysterious. In the beginning, you would find them in Oldsmobile Motor Division products. As time went on you started seeing this exact displacement under the hood of Buicks and performance models from the Pontiac Motor Division. Here we'll dig into the history of the record torque producing big block. We will also uncover the difference between a 455 SD (Super Duty) and a 455 HO (High Output). Discover if the Buick, Pontiac or Oldsmobile engine has an advantage over the other. Finally, learn how the 455 benefited during a time when GM's divisions took great pride in making their own engines. The Oldsmobile 455 Version Olds beat the other GM divisions to market with the first 455 Cubic Inch motor. In 1968 the engine found its way into Oldsmobile's premium luxury muscle car, the 442. They called it the Rocket 455 which became an excellent marketing tool. They based the engine off of the 425 CID found in the 1967 Toronado. The company actually retained the same size bore yet increased the stroke by altering the crankshaft. The side effects of a longer stroke include a healthy increase in torque. The downside is the engine finds itself a little slower at gathering RPMs. Horsepower ratings from 1968 through 1970 remained in the 375 to 400 HP range. At first, the engines remained exclusive to the Toronado, Cutlass and 442's. After 1970 you'll also find them in the Olds Vista Cruiser Station Wagons, Delta 88's and even GMC motorhomes. Stage I Buick 455 Performance Engine The Buick version of the 455 is actually quite different from the Oldsmobile version. Instead of altering the stroke, Buick honed out the cylinders on the 430 CID Buick Wildcat engine. For this reason, GM considered it a thin-walled big block. The advantage of this casting design is a significant drop in weight over the other 455 versions. In fact, the engine actually weighed close to 150 pounds less than the legendary 454 big block that Chevy used. This weight reduction compensated for slightly lower horsepower output from the Buick version. They rated the standard issue 455 at 350 HP and the high-performance stage I version at 360 HP. This engine had a short run starting in 1970. In 1975 General Motors started using the same engines across the different divisions and platforms. This gave them better compliance control for the increased power and fuel miles they buckled it into the ground. At the end I put that engine in my 1995 suburban and it was a muscle car bully that ran 10 seconds on a good day on a lumpectomy day she ran 11 seconds and for a suburban that’s quick thrown down . Edit if I fallowed my insane friends build I could have had a 9 second suburban . To tell you the truth I would love to own a cutlass 442 my mom had one when she was growing up . To be honest with you tony they don’t make any thing past the 80’s I would want to own and there’s no way in hell I would ever buy a electric vehicle that needs Nuku’alofa power or coal to charge your disposable Dixie . My wife said go find something at a dealership or something and I tell her every time 99 percent to a 100 dealership unless you’re in America you cannot buy anything but a new disposable Dixie nothing compare to the older vehicles.

[@midnigh7run420]

The LS4 is actually a fantastic engine for a fiero swap.

[@AutoGuild]

I'm searching that on google right now, very cool.

[@travispeoples]

Or a rear engine buggy

[@Ed.01]

I was thinking would or could it possibly work in my 2011 HHR?

[@Moecean]

It's a good engine in general. Just held back by the transmission.

[@SilkySmooth02]

Wow, never thought about that in the fiero 🤔everyone always just swaps the 3800 Super charged

[@yankee1985524]

So happy that I bought a 2017 Chevy SS with the LS3 an TR6060 6-speed manual. Perfect 4-door sedan.

[@kevinobrien4155]

Best car Australia ever made

[@izgon402]

I bet you are happy 😃.I work at a Chevy dealer in LA.I know how awesome those cars are.When customers try to complain about parts for SS. I remind them they have a special car

[@Wholelottaorange]

It’s really was that those cars are not bing made anymore, that car is so underrated and could’ve been the chargers rival

[@mista2621]

You could Get them with an LS9 in Aus and NZ. Worth big Bucks now , Some models reach 6 - 7 Figures price wise

[@moiv8]

@@mista2621 so jealous that’s car is awesome, & looks just as amazing!!

[@IanCole]

Please make a poster version of this info, would be great to have in the garage!

[@AutoGuild]

That's a good idea, I also want to make it as a pdf file and have it available on my website soon. For now though I'm working on a few more videos. Stay tuned!

[@seanbrimhall4163]

@@AutoGuild I second what Ian said. Please make this into a big poster!

[@spiceykibbles1901]

I’d 100% buy one

[@chrismigl27]

I vote yeeeeeessss!

[@n5yiz]

Poster is a great idea.

[@broman0386]

This is EXCELLENT work I love how it’s clear cut straight to the point. None of that “what’s up guys it’s ya boy etc” great job!!!!

[@chrism3784]

I have the 2013 corvette 427 with the ls7. Love it, plenty of power, no turbo to deal with, and when just cruising, very good gas mileage.

[@squidusn71]

I'd keep thag sucker forever especially if it's a stick.

[@slashnagy6]

chrism3784 did you have valve issues with your LS7?

[@antoniomontoya137]

You listed the L86 on earlier Sierras but not for 2015. I know there isn’t an “S” after the L but it’s the 6.2, all aluminum, high compression, 420 horse animal. Love it!!

[@kl0wnkiller912]

I love my 2014 CTS-V coupe. LSA is a great powerhouse but when you combine it with Cadillac's magnetic suspension and ride control system it really handles well. Had mine up to 165 with plenty of room to redline... it was actually still pulling pretty hard but I was running out of road so I backed off. Still adding mods as I can afford them. Headers are next followed by a cam. Great video BTW. Really smooths out the bewildering array of engines in this family, thanks for that!

[@AutoGuild]

I have not driven one but from what I've read that chassis is pretty amazing too.

[@djombock]

I have a 5th gen Z/28 with the LS7. I really love that motor. Great video and glad you mentioned the Z/28. There were not that many produced and is mostly overlooked

[@gene7314]

Nice man. Still have your Z/28? I have a 2014 Z/28. #368. Amazing car.

[@moiv8]

That car is so bad ass!!! it’s the closest car to a 911 GT3 GM has built

[@JadXtreme]

My 2017 Chevy Express van has the L96. It runs exceptionally well. Moves the loaded down van around with ease. So glad it has the G80 or it would have no traction. I hope to buy this van from my company some day so I can harvest the L96 and 6 speed auto for a swap!

[@markpointer4747]

Impressed with all your knowledge on all these engine. Plus your one of the few that calls it an engine. It blows my mind when people call then motors.

[@theREALnizzle]

Trailblazer SS never came with the 6 speed trans nor the 5.3. Just fyi

[@AutoGuild]

I know, I messed that one up. : ( I added a correction in the comments.

[@gillesjoseph1735]

But the regular Trailblazer did come with a 5.3...

[@familyfirst1st102]

The GMC Envoy came with the V-8 5.3 also the Saab truck came with the V-8 5.3 not the trailblazer SS.👌 Chicago Westside check-in!🌎

[@adamgonzales8007]

And the 2015 trucks came with a 6.2 not a 6.0

[@magichands8817]

OMG! Perfect! You have answered all my questions, and prayers with this amazing video! I’ve been trying to collect LS engine info too but just notes, and then you KNOCKED IT OUT OF THE PARK with amazing graphics listing (and most importantly) SHOWING all this info by year, listing model numbers, production numbers, aluminum/iron blocks, bore/stroke, visual head port style, etc. LS4 info from Impala SS still would’ve been nice, as someone commented that this short crankshaft FWD transaxle mounted engine is good for RWD transaxle install in Pontiac Fieros, or possibly maybe even V-8 engine swap upgrades from FWD N/A or Supercharged 3800 Series V-6 engines in Pontiacs (Grand Prix) & Buicks (Regal). THANK YOU so much for this AMAZING video!!!

[@AutoGuild]

Really glad you liked it, I have many more videos coming. Im going to make super detailed lists of all the stuff you need for an LS swap too. This video is also available as a poster if you are interested: teespring.com/ls-engine-history

[@regal105]

The lq9 was also available in the Silverado with the vortec max package.

[@austinpeterson6560]

I got one it's an amazing pickup

[@SonnyGTA]

Looking forward to this. I just bought a C5 Corvette! LS1!

[@johno9507]

The GTO is an Australian car, it was made here in Australia as the Holden Monaro. The Monaro being a 2 door version of the 4 door Holden Commodore SS and Calais.

[@billyjoejimbob56]

The Pontiac G8, Chev SS (same car pre and post GM bankruptcy) and the Chev Caprice PPV (police only) were also Australian built for the North American market.

[@USandGlobal]

No it isn’t 😂 the engines and transmissions are American built in GM plants then shipped to Australia for assembly.

[@johno9507]

@@USandGlobal The V8 engines were built in Canada and gearboxes in Mexico, the V6's and the rest of the car were all built in Australia.

[@bluebird8004]

@@USandGlobal So your saying that it isn't an Australian built car because it uses foreign parts? 🤣🤣 Wake up man

[@petecotter6790]

They don't talk about th me 6.0 in the commodore that's referred as a ls2 when it is not - the L98

[@backtheblue7716]

Excellent video. I have researched this myself. You broke down weeks of reading and comparisons into 12 minutes.

[@Kermitt1101]

I agree.... my LS3 "Hot Cam" is a great engine, and a lot of fun.... I highly recommend it!

[@petecotter6790]

Always interested in it. Tried to convince a customer to get one as I believe don't need to change out springs on the Ls3. More info be good on it

[@CountryFarmBoyUSA]

Wow, thanks for the informative videos on the LS! I grew up with the 350 chevys in the 70's and then got married and my priorities changed. I picked up a 2003 Suburban with the LS and thought it was basically the same SBC. Boy am I surprised how Chevy improved the SBC. Your 29 reasons the LS is better than an SBC is great and shows how the SBC has evolved. I have a 2007 Acadia V6 with dual overhead cams and the timing chain replacement was $2,000! With Chevy staying with one cam has simplified the service and made it easier to mod the LS. Thanks again, I learned a lot from your videos.

[@scottythebody0811]

I'm a Ford guy, but this was an excellent video. Thank you for taking the time to make it. And yes, a PDF version would be great. Thanks for posting.

[@OGbqze]

Fords amazing, but these engines are hard to compete with money wise.

[@yzScott]

My 2nd engine in my Z06 was an LSX block. The weight difference was noticeable. Back to aluminum with engine three. An 8.2L/502ci "LS7" built into an RHS block.

[@stevedean418]

I have a 08 Sierra Denali with a L92 that came from the factory without DoD or VVT which apparently is pretty uncommon because when ordering a stage 2 Cam shaft, cam gear and timing chain caused a little confusion but I have the cam, LS7 lifters, pushrods, rocker arms, valve springs and with a little CNC work to the 823 heads it made a huge difference from the stick configuration. I bought the truck brand new or basically new it had 1700 miles on it and it was the truck the owner of the dealership ordered for himself but after well over 200k it runs perfect the 6L80E has a little delay from 1-2 but if you know how to time it you can’t even feel it. I’d rather drive me 08 Denali over my 2017 Denali any day

[@losteroni]

I got the LM7 / L59 in my 06" Suburban and it's amazing , 279,000 miles and it runs like new !

[@mannieecker8602]

Great video sir.....I like how you put this together and explained everything very well.

[@BarraBomb]

the ls engine was still being used in australia to 2017 in the vf commodores, and in australia the gto is known as a vx/vz monaro

[@linguinatorschwartz9309]

We want the LT Overview video. I want an "LT7" to put in my truck. And boat. And airplane. | And blender.

[@Ambidextriouz]

Yes lt

[@Ambidextriouz]

Plz do

[@milojanis4901]

Fred Schwartz, wtf is an LT7??

[@linguinatorschwartz9309]

@@milojanis4901 -- Dood. It's a 7-liter engine. A 427.

[@blackonblack...9244]

I think the blender might be possible. Scaled micro LS1.

[@ScottO84]

Best video I've ever seen regarding the LS variants and their overall differences!

[@InFiD3ViL1]

Great video. A few minor things though. The L99 for the Camaro wasn't so much detuned as it was just spec'd differently for the use of VVT and AFM. Since it was the VVT/AFM version of the LS3 it had valve relief pistons, lowering the compression ratio to 10.3, instead of the 10.7 the LS3 (flat top pistons) has. Also, it has a lower lift camshaft compared to the LS3. The L99 also uses solid stem intake valves compared to the LS3's hollow stem intake valves. Contrary to frequent internet confusion, the LS3 did NOT come with sodium filled exhaust valves, which was reserved for the LS9/LS7. All of these changes are why the L99 was rated at a slightly lower 400 hp compared to the LS3's 426hp, but the VVT of the L99 made up for quite a bit with its ability to produce a rather flat torque curve. Also, the LS3 was still produced after the 2015 model year, being installed in the Chevy SS sedan until it's final year of production in 2017. But this is understandable seeing as it was really a rebadged Holden Commodore from Australia. Either way, awesome video that taught me a few things I didn't know about the Gen III and Gen IV engines.

[@moiv8]

Great video! I recently finished swapping an LS2/4L70E out of an Trailblazer SS into a friends Iroc Z28 ! Awesome feeling after four years

[@bryantalexander2592]

Dude I love you. You have really made this shit way easier. I appreciate it a lot Brotha good luck with all your future endeavors.

[@offtap6]

The LS7 also came in the Australian HSV W427 which they made 427 of

[@vazfx16]

Well done! Great graphics and information. I wish I had this when I did my BMW Wagon LS1 swap years ago!!!

[@AutoGuild]

Please tell me it is a manual trans unicorn BMW wagon? Love the wagon.

[@vazfx16]

(Head down in shame) I went with the 4L60e because of price. Manual was part of the plan, but the auto made it so easy. You can check out the build thread here: ls1tech.com/forums/conversions-hybrids/1627723-bmw-e34-touring-ls1-swap-bmw-5-series-wagon.html And some videos: kzbin.info/aero/PLD8XyncdkYYTZllaqHQVIPYXUVlVh2g_j

[@AutoGuild]

You are a mad scientist! Just watched your KZbin recap video. 2 questions: what was the hardest part? What's the next project? BTW, love how you did that intake!

[@vazfx16]

@@AutoGuild Thank you. The hardest part was the wiring. I didn't want any electrical problems, so I used the BMW stock wiring -- splicing in the GM wiring. This allowed me to avoid running any new wiring. The next project is a mid-engine Volvo 240 wagon. I have 98% of what I need, now it's a matter of finding the time to get it done. Here's a rough idea of the design instagram.com/p/B7vcqHjHoi1/

[@kl0wnkiller912]

@@vazfx16 Dude that is an awesome swap! Back in the 1970s when I was doing mad engine swaps it was always my dream to convert a Vega wagon to a mid engine out of an Olds Tornado. I figured you could lock up the steering and put the entire assembly in the back. That would have given 4 wheel independent suspension and disk brakes on the rear! Wish I could have swung it but in those days money was tight so i never managed to do it. The FWD Tornado was still pretty new back then and they were not cheap.

[@terryrutherford2114]

Great information. Thank you. My 2007 Chevrolet Silverado 2500 HD has a turbo diesel...Great powerful power plant for towing. My 2011 Cadillac CTS-V Has an LSA, 556 HP, 550 torque. Very fun car even today. I'm looking forward to a C8 Corvette Z06. If you haven't already, I'm new to your channel, you might want to talk about the C4 ZR1 LT5. I owned one. What a great power plant. 350CID designed by Lotus built on the line by Mercury Marine.

[@JB-xp8xl]

Nice job, I'll be referencing this for sometime to come. Going into my favorites folder.

[@AutoGuild]

Glad you enjoyed. What is your project?

[@LukyPhilo]

I got a L77 in my holden commodore. Great engine.

[@silverSScamaro]

LS1 was not detuned for camaros and firebirds. The published HP numbers were farce

[@jonescraig91]

Good video! but you are missing the L77 that came in the 2011-2017 Chevy Caprice PPV. 6.0L, 355 HP, AFM and flex fuel. Primarily sold in Australia as a Holden, but they are available here in the states as police cars, and are now on the used market as decommissioned.

[@captainzoll3303]

and a couple of little other things, like the LS9 being put back into production for the HSV GTSR W1.

[@AutoGuild]

Thanks. It was so much info to take on I decided not to do the Australian engines. Maybe a follow up video is needed for the Aussie models!

[@AutoGuild]

@@captainzoll3303 Wow, very cool, I had actually not seen that model before. Def a miss. I decided not to do the Aussie cars cause it was already so much work, but maybe I can do a separate video for the OZ cars in the future.

[@JosephCowen-fz8vj]

It was built in Australia, it is a Holden Statesman long wheelbase and came with L77 /76 6.0 but also with the L98 6.0 that's a much better engine, no AFM .

[@stacydornan9765]

My 98 LS1 in my FIREBIRD FORMULA is the best motor I have ever owned

[@crank1422]

I swapped an LM7 with an LS327 crate. Pretty nice upgrade for towing boats on weekends. Not really a performance engine, but sort of what the 5.3 always should have been leading up to the 2014 and newer engines, but with the added benefit of all 8 cylinders firing 100% of the time.

[@sambos7880]

Looking forward to a video covering the Aussie models 👍

[@USandGlobal]

No such thing as Aussie models mate😂

[@jcatx787]

Great information in your Videos. I have watched both twice and will probably watch both a few more times. I am looking forward to the LT1 video.

[@AutoGuild]

Glad u liked it. In researching this video I never saw the LS info laid out this way, I expect many people will reference this. Im still deciding the best engine for my 68 Camaro so I will likely use it too although I'm leaning towards the L92 (7:25).

[@linguinatorschwartz9309]

WHAT ? ? ? The best engine for EVERYTHING is the LT(anything). The LT is just the latest and greatest LS. The next iteration of the LS. The "new-&-improved" LS. Direct injection is the Holy Grail of modernity

[@sarmatiancougar7556]

Those truck engines are interesting. I imagine that 5.3 iron block with low compression can get into 1200 hp range for pretty cheap with a huge single turbo.

[@Platypus_Warrior]

V8 sounds great and I am not as knowledgeable as many of you here but it seem that for 3 to 6 cylinders is all that's needed. Less cylinders=less friction, more torque for the size, more efficient.... More cylinders=more power but more power stroke overlapping, more friction so more heat, more fuel, more weight, less reliability. Best engine sound comes from V10's (Porsche GT, Lexus LFA) but Ford got it right with the 6 cylinder GT and 3 cylinder ecoboost. That's what I think, I love efficiency. Great video, just subscribed.

[@AutoGuild]

All good points, it all depends on the type of car and what kind of power delivery you prefer. : )

[@livewiregto]

Finally, the video we have all waited for. Thank you!!

[@BonnevilleSlugger]

I was sent here by the Building Badazz channel, and I'm now the proud owner of a poster.

[@samduran5180]

I have a 15 with the L96, she runs so damn good.

[@jeladsnikpoh1289]

Great vid. The LM4 was not in the Trailblazer SS, SS and later SSR's got the LS2 6.0 with slightly different truck intake. They put the LM4 5.3 in the Trailblazer EXT and GMC Envoy XL (both long wheelbase) as relatively rare option above the 4.2 I6. I believe it was also an option on the short-wheelbase only Buick Raineer. I have a loaded '03 Envoy XL with the doubly rare 5.3 LM4 and 4.10 axle ratio, with lots of bolt-on performance parts. Quite snappy for a granny-wagon and sounds fantastic with catless Magnaflow system. Runs perfect and gets 20+ MPG with 4.10s @ over 240k miles.

[@boazlife7405]

Great info! Would love for you to make one on the LT engines.

[@ronaldroberts7221]

The 4.8L is the one nobody wants, and yet it still has the 1,000-HP bottom half, etc...stock is 255-280 HP, so it is the perfect turbo engine. This is the best video listing LS engines. Great graphics, and short. No wasted chat...all meat, no bone.

[@likenem]

Im just adding info that might be rare to some people, from 2009-12. The Colorado/Canyon came with a optional Aluminum 5.3. It was only Crew cab. If anyone sees a Colorado/Canyon with a V8, it might not be a swap and just a super rare truck

[@moonboost8199]

Oh that sounds like it'd be too much fun. I miss the sport truck segment.

[@AutoGuild]

The alum 5.3 is really nice if you can find one. Too bad GM didn't make more of those.

[@likenem]

@@moonboost8199 Dodge is crazy as hell and the durrango is suppose to built off of the Gladiator. Fingers Crossed.

[@G8GTJav]

Interesting, I need to look into that. I know the 5.3 was a rare option on Hummer H3 and H3T but don't remember it being available on Colorado or Canyon.

[@likenem]

@@G8GTJav There was a facebook click bait article about the Last Muscle pick up truck, the Dodge Dakota R/T. Someone in the comments mentioned the Colorado came with a 5.3

[@javaunceparker975]

Just found out I have L76 in my 08 Avalanche with the upgraded transmission. This video helped explain what I actually have because all the paper work says 5.3l but the sticker codes read L76. So thank you sir.

[@snaker02]

The 2014-2017 Chevrolet SS Sedan was equipped with the LS3. Update your visual aid

[@tylercouture216]

Definitely forgot to put those in there and its 2014-2017

[@AutoGuild]

I know, I added it to the comments. Great car too!

[@colinboynton192]

Great info! But whole video I was like “I can’t wait until he gets to 2014!” To be fair, he did say no Australian cars. I find it easier to tell people I drive a Holden Commodore SSV, rather than having to constantly explain what the hell a Chevy SS is to people. Clicking on your LS3 vid next.

[@tomnewham1269]

snaker02 he said he wasn’t going to add the Australian cars.

[@snaker02]

It was sold in USA at Chevy dealers, it should count

[@dougherbert7899]

The L96 production lives on, my 2019 Express 3500 has one, and I believe the 2020 model year has it as well.

[@ClintonC1991]

Got one. Love it

[@dougherbert7899]

b T for the trucks, yes, but I understand the vans are keeping the L96

[@LSswapGarage1]

Cab and chassis trucks and Van's are still the L96. It will continue on for resale outside GM for years

[@craigd51]

L96 owner here, 130K and i trust it to drive across country, id love to swap it into my 78 c10 lol

[@nwinter2752]

2019 express 3500 with the L96 and 6L90, wish it had more power, looks like the truck versions had more power. What gives?

[@legendary6790]

Then you have the LSX, which was basically an LS7 but cast iron and increased size to 454ci (or 7.4L for you weird metric people). You might say why cast iron and bigger displacement, doesn't that defeat the purpose of the LS? And you are right, but that is not the purpose of the new big block. See the problem with the LS7 was that in reality, it was the question of how much can we bore out a small block and still make it run? The problem being with that is if you run any kind of forced induction, you would blow your head gasket as there is no more space for the extra air to go. LSX solved that problem so that you can get up over 2,000 HP with them when they are properly blown or turboed. Good vid though. Enjoyed it. Edit: I guess people these days don't understand a joke

[@freeminded7]

Meh metric is better in every possible way.

[@commyfarknmang9478]

Where not weird we just use a different way of sorting stuff out but we still say cubic inch

[@tuduff]

The whole world uses metric. Guess who is the idiot that uses imperial and yards? You right.

[@charleslowe522]

When I'm blown, I can probably produce 2000hp as well.

[@JosephCowen-fz8vj]

Yeah nah , buddy LS7 was called LS7 because it was 7.0 litres or 427 ci not 7.4 for 454. And if you use the English imperial system that's weird, as the world uses metric even the English that invented the imperial system the US uses went to metric years ago.

[@mattduffy2023]

Got a 2017 silverado z71 ltz crewcab with the 6.2 and the G80 is having issues keeping up with the 420 horsepower and 460 torque...lol. now the 8 speed transmission is junk. Had mine rebuilt with the torque converter from Chevy. only got 33,000 miles on her too

[@ryanaustin1970]

Excellent video , complete and clear. Love to see a lt video

[@andrewmorgan8507]

I have a quick comment. You can have aluminium heads on a iron block from the factory. My 4.8 has some. Gm just kinda let whatever go out on whatever so make sure you look up casting numbers on your heads

[@RICHON1979]

Well im more then happy with my ls1 99 camaro ss 🤗

[@xekret]

Same here! The thing is a beast in the 4th gen.

[@bradwilliams4921]

Once upon a time I had an LS1 99 Camaro SS myself, and it was a blast to drive.

[@dekebell3307]

Finally, someone put everything together in one GREAT video!!! Thanks for making this! Definitely going to order a poster!)

[@AMomcilo1]

On the seventh day God created the LS V-8 and saw that it was good. -Bible

[@musclebone7875]

Yeah ok!

[@pyrorye-80]

Haha i love it!!

Then Ford created Godzilla.

[@musclebone7875]

@ the truck engine

@@musclebone7875 Yeah, the new 7.3 liter pushrod mill. Forged crank, tall valve springs, 6 bolt mains. Fairly compact for a 445 cid engine.

[@kevin9c1]

L96 6.0L ran until 2019 in the 3/4 ton and 1 ton trucks. Not sure about the 4.8 in vans. L96 is STILL available in the 2020 vans. This is good so there is still going to be a steady junkyard supply of Gen IVs.

[@thomasreid8504]

This is one of the best sites for LS info. Glad I found it.

[@Dr.Westside]

I'll keep my indestructible lm7 with a single turbo .

[@martinez1701a]

I built a LM7 for my Trans am when my LS1 took a poop, ported 862's 216/220 .560 114 cam LR4 flat top pistons 10.20:1 compression it kicks ass!

[@mechantics]

My 67 Dodge d200 Sweptline is powered by an lm7/ 4l60e 😁

[@robertcook4590]

I got a 07 yukon slt with the LM7 5.3 and 799 heads 197,754 miles still runs strong fun to drive its shorter wheel base makes it awesome to me ✌💚

[@v.e.7236]

I swapped an LS1 for Vortec cast iron V6 and lost ~150lbs. and gained the same in HP. Best upgrade you can make - dump the cast iron lump.

[@kimchappell9559]

Yes please do the LT1 information video and posters. Thanks.

[@dano4572]

HIGHLY RECOMMEND "ALL" OF HIS LS SERIES VIDEOS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. just sayin

[@jeffnovak9051]

Please do a breakdown on the LT engines. Great job on going through all the fantastic LS engines. You earned a LIKE & my subscription !

[@robertjohnson1981]

What engine is in GMC Savanna 2018 THREE QUARTER TON U HAUL VAN

[@dschinkal]

Make the LT video

[@AutoGuild]

Noted. : ) Ive got a few others already coming next but its on my short list!

[@haydendenard2693]

I've had a ton of LM7s can't say enough good about them and now I've got an L92 in my wife's Denali and it is absolutely awesome deleted the AFM with a cam and tuned it's amazing

[@theroyalcrownedtiger2946]

I will be looking to put V8 into a S10 / S15.

[@PiggyDetector]

The Royal Crowned Tiger I recommend strengthening the frame. I had a built LS2 in my 2000 s10 and the torque literally twisted the frame a tad when I launched

[@theroyalcrownedtiger2946]

@@PiggyDetector : Thank you 👍😀👍

[@Bigskyguy56]

Great info. Even for the seasoned LS swapper. Thanks, I learned a few things , I didn't know about.

[@AutoGuild]

Thanks so much for the kind words. Keeps me going! : )

[@peguesemiles43]

Awesome video. I'd love to see a video on the 3800 Series V6 engines

[@AutoGuild]

OMG my old roommate swapped one of those into an old Toyota Tacoma truck, it was wicked. Ive got a few other videos coming soon, Ill add that to the list.

[@G8GTJav]

That would be a long story starting way back with buick.

[@ramshacks9493]

I'm a happy LS4 owner, the fact that the ls4 can make alot of power just by swapping in a bigger tranny the 4t80e and hold up alot of power I can't wait to make at least 500hp in mine soon💯🤞

[@codygarza996]

I keep my ISS pretty much stock just a muffler delete and the dod delete...sounds very nice and pulls good

[@econorock]

Chevys version of the Ford YBlock

[@austinhowze6280]

It's really a motor ford first design for the mustang they didnt use it and had a perfectly good motor so the sold the plans to chevy

[@shitbox7413]

😂

[@Steve_I]

Some people claim that but no one can seem to provide proof of it other than they are similar in construction.

[@austinhowze6280]

@@Steve_I if you drill the bolt holes on a 351 head a little bigger you can use them on a ls1 car

[@Sir.VicsMasher]

9:22 [The 4.8, and 5.3 all came with cathedral port heads so you are going to want the 6.2L on the truck side.] The 6.0L iron block LY6 also had LS3 style rectangle port heads.

[@AutoGuild]

Good catch, I will add that to the corrections at the top of the comments. Thanks : )

[@Sir.VicsMasher]

@@AutoGuild Cool you also might want to add that the LY6 was also available with a 4L80.

[@richarddobreny6664]

Don’t get anything with DoD! Why the LS3 remains king

[@alfresco4976]

Why?

[@richarddobreny6664]

al fresco that’s the only failure point on these V8’s. Has to do with collapsing the valves. Same issue with thenhemi’s . No real appreciable fuel economy gain.

[@bretbradbury5559]

Good info. I caught some of this later but heard it different in the beginning. If you're wanting to build a powerful engine, iron blocks are the easier way. The LSX block weighs 125 lbs more and conventional iron blocks are 107 lbs above the LS2. TMS is offering top fuel hoops, billet main caps and Darton sleeves to help the aluminum blocks hold an easy 1500whp. Not the purpose of your video, I get it but someone might appreciate the added info. The newer manual transmission is a TR6060, not 660. It also loses a major point of failure by losing the cast keys.

[@Smokey-88]

Iron Ls engine blocks are 225 pounds(so are LSX blocks) aluminum versions 130 pounds lighter(Ls1,2,3,4,6,7,9 I can keep going..)

[@bretbradbury5559]

smokey 88 I might be missing the purpose of the comment. I'm sure you're aware that iron blocks don't all weigh 225lbs. The LSX weighs more than the other iron blocks and the 4.8 iron weighs more than the 5.3 and the 5.3 weighs more than the 6.0.

[@linguinatorschwartz9309]

@@bretbradbury5559 -- Fer Pete's sake, dude. Don't tease and perplex us . . . tell us the actual weights.

[@bretbradbury5559]

Fred Schwartz , the 6.0 iron is around 205lbs vs the LSX at 225-230 depending on where you machine your deck height and how much it's bored. The 4.8 is about 230 the 5.3 is about 225 and the 6.0 is about 207

[@Smokey-88]

@@bretbradbury5559 Not here to argue semantics, these are facts, A bare gen 1 small block weighs between 160-180 lbs depending on who you believe. A LSX iron race block weighs 225 lbs. An aluminum ls1,2,3,6 is about 125lbs, a ls7 weighs a bit more. In your message you come across like a machine shop is taking off pounds of material, come on man. Also if you're talkin about a 15 to 20 lb variant on iron blocks? so what.

[@Ambidextriouz]

Do Lt engines please Plz like👍

[@cheeseburgerrunner5217]

Great video man and you kept this video not too long for the amount of info in there. Much appreciated.

[@structuredforex6370]

I thought LS v8 was a Lexus V8 Now i know

[@alexismendoza1545]

Nah the car is called LS the engine is a 1UZ I believe

[@JosephCowen-fz8vj]

Well the history of the Lexus V8 goes back to Chrysler Hemis , the first Toyota V8s in the Century and Crown were copy's of Chrysler Hemi,s , later they evolved with over head cams and became today's Toyota based V8s.

[@SamuelHollandsh]

Hi, thanks for sharing! Can you believe why I kick myself all the time? I once owned a 97 Corvette package 30th anniversary Camaro complete with my favorite- the six speed manual. Anyway I wish I could of at least kept some parts from that vehicle. Awesome videos by the way and really enjoying 🙂👍

[@grngs1]

Dont forget the fact that the LS engines were designed by a Ford engineer that came to work for GM, sorry to burst yer bubbles

[@randyatwood4434]

prove it !!!! sorry to bust your bubble !!!!

[@JosephCowen-fz8vj]

Yeah rite buddy , for your information, the LS1 was 95 percent a copy not of a Ford or any other company, but another GM brands V8 the General Motors Holden 1988 5.0 litre injected V8 , it is almost identical to the LS but 10 years earlier . Google a picture.

[@danieldeleon8001]

My grandpa got a new truck a few years ago so I bought his old 91 Chevy Cheyenne 4.3L v6. I've recently swapped the engine to a supercharged LS7 from a 2015 Camaro. It's pretty freakin rad now!

[@AutoGuild]

Thats really cool, Im really looking forward on the swap for my Camaro. What transmission are you running?

[@danieldeleon8001]

@@AutoGuild the transmission is a Tremec TR6060

[@G8GTJav]

L76 truck motor is a good one to find as well. Have one in my family's '09 Vortec Max. Has the L92/LS3 heads just like the L76 in my G8. Funny how GM named them the same.

[@FURDOG1961]

5:05 AFM Introduction. (Gen IV 2005) 8:16 LS3 Introduction. (2008, 430HP.) 10:55 Gen V LT1 introduction. (2014, 455-460 HP.)

[@chrish.434]

What type pistons are in the 2000 LS1 ASA motor there were only 300 of them made. This engine dyno at 485 hps. It is also referred to as a Votec Red motor.

[@kenney5454]

Great tell all DIY Build Sheet Video! Selling the poster, Genius

[@cajunroadwarrior]

You really should have detailed the LS4. There are a lot of FWD car owners that would love the power and reliability of a fwd LS engine. Then there are all the Fiero owners that are swapping LS4 engines in them.

[@Ludes702]

My 2012 silverado has an LMg iron block. In 2010 they swapped the old piston heads for piston heads with valve relieves.

[@williamgeary5602]

Excellent video. Clear voice. Very good info. I only have one correction: please don't call the 2013 427 "basically a Z06 convertible"! It's actually a GS convertible with an LS7. Steel frame, no carbon fiber front fenders, no magnesium engine cradle, etc, etc.... Still a fine choice for collectors, just not a topless Z06!

[@LSswapGarage1]

The LS is still alive and well in the 2020 model year. The L96 6 liter remains in all the commercial van models and has not yet been replaced by the L8T 6.6 direct injected engine that debuted in the HD trucks. But even there is exceptions as the cab and chassis model HD trucks are carryover and still use the L96 for 2020. The L96 will likely remain in production for a few years yet for commercial buyers in non GM chassis's.

[@MikeL-vu7jo]

I bought a 2009 1500 Silverado Z71 brand new back in 09 with the 5.3 315hp still driving her 183K and some change , Just keep the oil changed with Mobil 1 full syn. 5w30 or some other full syn. maybe Castrol or Valvoline and a good filter other than some small things it's been pretty reliable can't really complain , Oh and every fall I have her spray oiled for rust control , Thanks.

[@driftingthemnutz1725]

Best video on KZbin for LS information

[@stevenallen6245]

I lov the Lt4 engines they cost a good penny but they sound very good with the right exhaust setup..

[@3DKreateFPV]

I saw the L33 on the sheet but it got no talking about. Kinda bummed it didnt get brought up as thats what I swapped into my 04 tahoe to replace a bad l59. Its flipping awesome, all the good of the gen 4 platform, without any of the bad in a lightweight truck package. It was super easy to swap in too as it uses all the same connections as the gen 3 engines

[@alcam4226]

I want to see this with the Subaru boxer ej, fa and 6 cylinder engines, the Toyota JZ engines, the nissan RB series.

[@AutoGuild]

Oh man, that would be sweet. I will add it to the list. But I dont know those engines so well. I will try!

[@alcam4226]

Auto Guild your views will GROW substantially! I’m subscribing now.

[@StLoaded-k6r]

Thank u for this video I am ls swapping my c5 soon and needed a guide on what to do cause the engine was not cutting it even though it has a ls already

[@FixItPleaseJ]

@AutoGuild Great Video! Love the info and the clear visual aides and low key audio with no annoying hype music.

[@billybdesigns6326]

Great information but what about the 2005 L33 5.3 aluminum block found in Z71 Silverado

[@LSswapGarage1]

Not Z71... just extended cab 4x4 trucks from 05 through 07. Aluminum block,flat top pistons, 9.9:1 compression,243 or 799 heads and a slightly hotter cam than the LM7 and L59.