AUTOLift 3000 - Unboxing and First Test ᴴᴰ

Mobile Car Lift AUTOLift 3000
•Unboxing
•Mounting
•First Test
Test with a -40mm lowered Opel Signum

[@MrGreen_]

Totally safe mines been under my car for a year for resto ,and had no issues ..you get a large axel stand with the set It’s not cheap but it’s well made 👍

[@moonlalune8003]

how does it fare for oil changing?

[@ggj666]

Does it do any damage to sills, as its not lifting on jacking points, or is it ok as weight is spread over large area

[@KrystianDEPL]

Exactly 👍🏻 it damages nothing because its spread over a large area

[@ggj666]

@@KrystianDEPL many thanks for reply

[@TheTrueJoker91]

Could have done without the music

[@dadtype2339]

I don't understand why people don't talk in their videos, unless maybe they either don't speak English, OR they doing talk to themselves like the rest of us do, lol, I still have you a thumbs up.

[@KrystianDEPL]

So look at my other vids mate ;)

[@israelvalentim5380]

Do you send it to Brazil? What's the website to buy?

[@fashionstreet1]

Awesome tool and video where can I purchase this item?

[@qrs3658]

looks like a good concept but am not sure about the safety. so if you working below the front of the car and you don't want it to tilt down, does it have a locking mechanism?

[@KrystianDEPL]

I'm working with it almost 5 years and it's more safety than the common lifters.

[@qrs3658]

is there a lock mechanism that can stop it from tilting down if you are working under the vehicle? or maybe a tall jack stand can be used

[@KrystianDEPL]

@@qrs3658 i work with jack stands to level up the car if it is necessary

[@obliviondio]

@@KrystianDEPL Is there a 'locking' safety feature is what he's asking. He doesn't what to know how you yourself go about using the unit.

[@FaridJaafar]

@@obliviondio Yes it has a locking system. I have a unit myself. The manual suggests using stands as well for added safety.

[@RuperScooper]

Apart from easily working on brakes and wheels I don’t get this lift it creates a very awkward working height when underneath the car laying down it’s too high and crouching wouldn’t work - invest another 1000 euros you got yourself a proper good two post car lift ?!?!

[@KrystianDEPL]

I'm working with it almost 5 years and don't have any problems

[@MrGreen_]

Two post ain’t much good in your drive way our a shed that it won’t fit in ??

[@MikeMike-is2hl]

Proper installation of any 2/4 post will need a proper concrete base, a permanent location, indoors. This unit is 100lbs and can used outdoors, stored against a wall with provide wall mount bracket, try that with the 2/4 post

[@appraisal951]

does the lift have to be fully extended or can it go half way to rotate tires without lifting the tire too high?

[@KrystianDEPL]

Doesn't have to be full lifted up. Half or a quart is okay

[@Thorgal85]

Moet je hem helemaal omhoog "krikken" of kan je hem ook net hoog genoeg zetten voor een bandenwissel of dergelijke?

[@KrystianDEPL]

Hoi! Ja natuurlijk moet je niet de krik omhoog zetten. Jij kan ook als je dat wil, gewoon 20cm hoog zetten (de max. is 60cm). Fijne dag ;)

[@Thorgal85]

@@KrystianDEPL thx voor het antwoord :-D

[@KrystianDEPL]

@@Thorgal85 Graag gedaan :)

[@nearpar]

HAS ANYONE BESIDES THIS ACTUALLY USED ONE?

[@nehuge]

What do you do when the car tips to the front when youre under it onto you?

[@MrGreen_]

You have a big axel stand

[@chunckyfreshnut]

How much did you see it for

[@moyalvarez4595]

Soy d maxico df como puedo atkirirla

[@weiwencen748]

我付款了怎么一个多月还没有收到任何东西，发信息没有人回答我。骗人的网站

[@TheOnlyArtur]

Hey kommst du uns Herford? Kann ich mir das bei dir mal anschauen 😅

[@KrystianDEPL]

Ja. Nein ;)

[@uncleseryozha]

Ни хера не понял какая у него цена. Можешь в описание видел добавить где купил и за сколько. Спасибо

[@ferrochinabisleri1587]

That drill you're using I think it'ld be insufficient with a car loaded (bosch GMB 10 RE, 360 W, 20,0 Nm of torque)

[@KrystianDEPL]

i don't use this drill

[@JohnBobRoger]

Where can we get one in the Great White North (Canada)? ..nice to see eh? Instead of Murica

[@KrystianDEPL]

Hey ✌🏻 Ask vancouverautolift.ca/ for prices 😉 i just luv it 😊

[@MrDonpasqualino]

@@KrystianDEPL - Or drop $2500 and get a real 2 post hoist

[@brucehoward4918]

Where/how do I get one of these in Colorado, USA, (zip 80229)

[@KrystianDEPL]

Bruce Howard i don't know, contact the Producer

[@trueblu75]

I know that you asked 2 years ago, but never too late... m.northerntool.com/shop/tools/product_200778651_200778651?cm_mmc=Google-pla&Google_PLA&Automotive%20%3E%20Automotive%20Lifts&Dannmar&&lid=92700040205261535&ds_s_kwgid=58700000740123709&ds_e_product_group_id=635583742204&ds_e_product_store_id=&ds_e_ad_type=pla&ds_s_inventory_feed_id=97700000001662305&gclid=Cj0KCQjwybD0BRDyARIsACyS8ms9J61xYsn8fIx06ZfG0vIBJ9waM5-GveLdzM5h1QwvzMGbD2Rbsv8aArEaEALw_wcB

[@fantasticsound2085]

@@trueblu75 No longer available.

[@want2balone]

@@trueblu75 would like to know why it is no longer available

[@Hx4396]

Benutzt du das Produkt Immer noch falls ja hat es schön irgendwelche Kontrapunkte nach langen benutzten weil Bin echt kurz davor sowas zu holen

[@HostLT]

Hast dus dir denn geholt?

[@Hx4396]

@@HostLT ja mittlerweile habe ich eine bodeneinsenkbare bühne für meine garage geholt aber für unterboden schweißarbeiten benutze ich das dingen immernoch

[@deanlandry2045]

I ordered it they saying it is a fraud on the web.

[@DcComplete]

Does it work? I just need to change 02 sensor and need the lift. For $30, I’ll try it. I have 02 explorer

[@ferrochinabisleri1587]

For what it is, really too much expensive(1250 €)!

[@adb6106]

Witam, od kogo Pan kupił podnośnik widoczny na filmie? Pozdrawiam!

[@KrystianDEPL]

Witam, kupowałem prosto od producenta z Czech. www.autolift3000.com/en/kontakt/

[@jurgenvdp3450]

Handig.... Wat heb je die betaald? Transportkosten vanuit Polen?

[@KrystianDEPL]

Jurgen VdP is niet uit Polen, 975€ met transport uit CZ

[@zawiasc]

@@KrystianDEPL teraz kosztuje 300€

[@KrystianDEPL]

@@zawiasc taa 😂

[@rosananascimento791]

onde compra

[@danielraynnier963]

Quanto custa onde comprar uma

[@kylelee4682]

So it's not gunna tip over to the side I'm working on ig I gotta get rough

[@KrystianDEPL]

no, if you wanna tip over to the side you need to turn the lift 90°

[@kylelee4682]

@@KrystianDEPL ok so there's a locking feature

[@KrystianDEPL]

@@kylelee4682 oh i dont understood you correctly, i take my answer back 🙉

[@kylelee4682]

@@KrystianDEPL so say I'm working on the rear end of the car if I have to pull down hard for some reason will it tip over to that side? Or is the sum type of safety feature that won't allow it to tip on top of me?

[@KrystianDEPL]

@@kylelee4682 it depends from how big your car is.. but if i do something on the rear i tilt up not on the front but on the back and nothing happens then by pulling hard on the Chassis

[@cengizilhanbostancsanayi8521]

Türkiye'de varmı bu ürün

[@kamilskowronski1091]

Trzyma się jeszcze po tylu latach ?

[@KrystianDEPL]

Pewnie że tak! 🙂

[@CACTUS48]

Can you adjust the width...

[@KrystianDEPL]

Of course 👍🏻

[@schade12]

Do you sell worm gear

[@dexterchrome274]

Prezzo€??

[@TheHell666yeah]

I saw this lift today. What is the price on that?

[@KrystianDEPL]

TheHell666yeah where do you live?

[@TheHell666yeah]

Slovenia.

[@KrystianDEPL]

TheHell666yeah i don't know if in SLO is an Distributor, but about 950€ ;)

[@schade12]

KrystianDEPL there is less just 400 in ebay

[@schade12]

can you sell worm reducer

[@raimerota8971]

greaaaaaaat.

[@Hameddemerd]

Ma si presume che si possa sollevare l'auto appoggiandola sui lati...le auto invece hanno dei punti ben precisi di sollevamento dove inserire gli appositi inserti in gomma dura (vedi BMW e mercedes) se sollevi l'auto sulla carrozzeria la sfondi

[@KrystianDEPL]

Do you have a Question? So write please in PL, DE, EN, NL or CSB

[@jesusistgott1970]

Hallo, wer produziert solche Sachen und wie viel kostet es ?

[@KrystianDEPL]

www.autoliftproduction.com/ Aber Qualität hat seinen Preis, es geht ja schließlich ums eigene wohl.. 1000€ kannst du rechnen. LG

[@mikeberryman5322]

Still like it?

[@KrystianDEPL]

Of course, look at my newest video where i using the AutoLift ;)

[@VideoNOLA]

Overpackaged much?

[@KrystianDEPL]

What do you mean?

[@ramsesxix4492]

Hi ,what drill i need ?? How many watt??

[@KrystianDEPL]

At least 1300w

[@ramsesxix4492]

@@KrystianDEPL ok thank you

[@ramsesxix4492]

@@KrystianDEPL what brend??

[@KrystianDEPL]

@@ramsesxix4492 Metabo for example

[@BPoweredLove]

@@KrystianDEPL Can you use impact wrench?

[@RGVisuals]

Leider so Teuer das man sich dafür bald neh gebrauchte 2 Säulenbühne auf EBay holen kann.

[@KrystianDEPL]

Generell richtig, aber kommt immer auf die Platz und Bodenverhältnisse an. Bringt ja nichts wenn du erstmal für 1000€ einen Erdaushub und danach eine neue Betonfundamentplatte gießen musst ;)

[@tomaszziomek4398]

Ile kosztowało to urządzenie ciebie czekam na odpowiedź

[@KrystianDEPL]

Jak dobrze pamietam to 25000Kč z transportem do Niemiec. Pozdrawiam

[@tomaszziomek4398]

@@KrystianDEPL na zł ile to wychodzi

[@KrystianDEPL]

@@tomaszziomek4398 ok. 4500zł

[@sevinahazizi3126]

how max is the price

[@KrystianDEPL]

Good Quality haves his price, about 975€.

[@schade12]

Sevina Hazizi in Germany cost 450euro in eBay good quality 4 years ago when I was searching it your it wasn't exist then you copy it

[@brucehoward4918]

for that price...where can I get on in the USA???

[@trueblu75]

m.northerntool.com/shop/tools/product_200778651_200778651?cm_mmc=Google-pla&Google_PLA&Automotive%20%3E%20Automotive%20Lifts&Dannmar&&lid=92700040205261535&ds_s_kwgid=58700000740123709&ds_e_product_group_id=635583742204&ds_e_product_store_id=&ds_e_ad_type=pla&ds_s_inventory_feed_id=97700000001662305&gclid=Cj0KCQjwybD0BRDyARIsACyS8ms9J61xYsn8fIx06ZfG0vIBJ9waM5-GveLdzM5h1QwvzMGbD2Rbsv8aArEaEALw_wcB

[@williamjames2449]

The proper price for the EzyLift 3000 in the United Kingdom is £830 (around $1150) so if you see it for $40 on Facebook it is one of the virtually 100% scams. Please spread the word.

[@user-es6vz5qq9w]

весч!

[@bigjose8358]

Its nice but 1500 no way you can get something better for that kind of money

[@BPoweredLove]

Like what? Serious question, not being a smart a$$. I'm trying to stay around this price point.

[@wuwokwuwok6828]

Jaka cena ?gdzie w Pl można to kupić?

[@KrystianDEPL]

Wuwok Wuwok Hej, w Polsce masz Dystrybutor (AUTOLift 3000 PL), ich się spytaj o cenę. Ale powiem tak, Jakość ma swoją cenę ;)

[@earthangelgcb6413]

THIS SAME AD SCAMMED ME LAST YEAR OUT OF 2 OF THESE AND I NEVER GOT A REFUND!!! CON ARTIST

[@avinashjha6522]

is it safe??looks horrible.

[@KrystianDEPL]

It's not Africa mate ;) It's a European approved Product, and works very good :) Best Regards

[@flippy9133]

for that money i would rather have quickjack, much better

[@KrystianDEPL]

I thinked about it too but it costs 40% more, don't lift so high and the Autolift is easier to carry.. so i decided for the AutoLift

[@flippy9133]

@@KrystianDEPL it's just 200eur more expensive, how is it easier to carry, quick jack is much smaller when folded.

[@KrystianDEPL]

@@flippy9133 i bought the Autolift for under 1000€, and a QuickJack with 3ton. Capacity costs 40% more. Easier to carry because you dont need to carry 3 things

[@flippy9133]

@@KrystianDEPL I guess it up to personal preference :)

[@MikeMike-is2hl]

Much higher clearance once tilted... Work on the back, tilt the front down and vice versa.

[@user-bh8cm7pw2q]

Fucking music

[@Authoratah]

No room to work on the supported side and you risk having the car tilt on top of you....no thanks.

[@scottwatrous]

Isn't that what a jackstand or secondary support would be good for? I definitely wouldn't want to be under the end without some kind of secondary, but seeing as this is otherwise fairly compact I'd call it an even trade.

[@DuBstep115]

Scott Watrous with high stand i see no problem, when i was young i oftend just jacked the car up with normal jack and put car tyres under car and went in

[@takeiteasy6154]

Just use secondary stands, easy, this is a very compact piece of equipment, good for people who don't have much room in the house

[@chrislock4656]

Rubbish music off, try talking to give people ideas

[@KrystianDEPL]

Soooo, you understand polish? Very interesting