Automatic FOOTWELL Light Kit for my Tacoma! (Plug-and-Play) | Install + Review **SEE DESCRIPTION**

[@danrex3084]

I just left the Toyota dealer yesterday and now waiting for my Tacoma Off road. Your videos have been very helpful in my decision to pick one up! Thank yoU!

[@ChloeKuo]

UPDATE 2023: VLEDS has a new V2 harness that requires slightly different install instructions than shown in this video. Please see the additional updated video instructions if following along: kzbin.info/www/bejne/eIHLdmxshsefhJY. Thank you! -- Hope you enjoyed the video! I wanted to make a small correction-the PWM only adjusts the “night mode” brightness (and I was told that it is at the lowest setting out of the box). Anyways, thanks for watching as always and happy modding 😄

[@TroyFujimoto808]

Thanks. Another great mod install video. I missed your video on mounting the fire extinguisher and First Aid Kit in your rig.

[@mikecameron4918]

Chloe, Not trying to be demeaning in any way, but, for a girl, you do some of the BEST, most detailed, mod installation videos I have seen! Way to go girl! You are very talented!

[@anthonyvasquez7050]

You made all that look so easy ! At the factory training people to install that A Pillar is so difficult, most people just don’t get it. The door weatherstripping as well. I would be really surprised if you didn’t leave a big gap at the bottom of the a Pillar where it meets the instrument panel. Either way great job !

[@robob221]

How did you remove the white clip??? You only stated you used the provided flat head but I have no idea how to remove it. Please show every step in video.

[@anthonyvasquez7050]

@@robob221 there should be a tab to push down on. If you don’t see it might be tapped over or possibly even flipped

[@codyalexander1150]

Just picked up my third gen and I’m loving you’re videos. I love how much you’ve done to your truck while still maintaining a relatively OEM look. Keep it up!

[@TheKingDorito]

Just got my VLEDS today! Going to have to watch this vid a couple more times to make sure I get it done right. Thanks Chloe!!

[@jimo680]

YES! Thanks Chloe. After 30 years of driving trucks and cars with black interiors, I had enough. It was frustrating discovering how many Toyotas have black-only interiors; or, black-only floor areas. The LED lights are a fantastic. Thanks for doing a very clean look and install. I do a lot of night and winter work so dark footwells and floors are never any help. This was a GREAT tutorial. Toyota needs to get you to do the RAVs, Highlanders and Land Cruiser 😁

[@StacieS307]

Yesterday I installed some of those VLED lights in the footwells of not only the front seats but for the back seats too. Took me longer than I would have liked but I think they look awesome and I think I will enjoy them for years to come.

[@mattcornett7180]

Thanks Chloe… I just bought the VLEDS footwell kit for my 69 mustang. They actually have a plug that fits into my stock courtesy light bulb socket… so totally plug and play… and no hacking up my classic car wiring. Couldn’t be happier with the kit.

[@troythompson5584]

Chloe, you keep spending my money!! I just got the MillerCAT Cat Shield and will install that this weekend. Great videos! Very detailed and informative. I'll be putting these footwell lights on my shopping list.

[@jmullin009]

I love how accessible you make this stuff. Sometimes you hear about having to rewire stuff and it's like nah, i don't have that in me, and then you do it so simply i leave your videos thinking, yeah i got this. Thanks for doing what you're doing!

[@fishhead90]

Thanks for the awesome video. I just installed mine tonight with your help!

[@garyflores8992]

Hi Chloe I just received my VLEDS foot well lighting and they've been on back order for like 3 months. So I finally have mine looking forward to the install. And also your instructional install video was presented very well . Great job

[@jameshenninger8894]

Tacoma Chloe SO CUTE!!! Love the videos..

[@jamram9924]

They're also available for the 2014-2021 Toyota Tundra. Vleds appears to be one of the bet "plug and play" footwell and also puddle lighting available. Thanks Chloe.....excellent posting!

[@3Dee3Dee]

Hi Chloe. I love your KZbin channel. I got several mods based on your recommendations. I am going’s to install the footwells…your YT definitely convinced me. I cannot handle anymore than one vehicle at a time. I do not know how you do it. I wanted to thank you for the information I have acquired from your subscription. Thank you. Huge follower. 🤟

[@donsalice8527]

You are such a breath of fresh air! I love your videos!

[@PatrickJ.Sherrod]

At the 10:00 mark, I could not remove the connector from the white piece that is attached to the pillar. Can you explain how you did this?

[@cpsmonroe1]

Nice vid. Next do a demo for installing the rear VLED kit.

[@richardtick7885]

Thanks for the easy-to-follow directions. I just got mine and they look great worth the money. I work nights and this is great to have. No need to hunt with a flashlight when you drop something anymore and I can see getting in and out. Chole keeps showing us nothing but great products unlike so others out there that just show anything they get for free and lie about how good they are. Thanks again

[@philandrews6300]

I have a red theme. might have to pick the red one up! Great video as per usual :)!

[@BAcHIGU_]

2nd gen? Great video as always!

[@brandtedwards7735]

Question. Can you “shut off” the map lights and interior light with the switch up by the map lights and still have the Footwell lights function when the doors open ? Also, can the nite mode be shut off ? I like a dark interior when I’m driving. My dash lights are as dim as possible and I never use the center radio screen. I see very well in the dark, and simply do not like a lot of light. Thank you for your informative installation videos. Job well done.

[@Alpha-uk4yb]

I love the idea! I don’t think I can justify spending $120 on them though. Happy modding.

[@active411vm]

Ya 120 is crazy for some foot lighting lol

[@vadimfuks463]

It is not crazy, it is retarded. Just for the front.

[@ellerybice3787]

You can give up several of your bad habits and you will have saved up the $120.00 in a flash, which color of flash is your option.

[@Alpha-uk4yb]

@@ellerybice3787 how dare you excuse me of having a bad habit! *Sips Starbucks White Mocha*

[@ellerybice3787]

@@Alpha-uk4yb that's not necessarily at bad habit, a bit expensive though. It might be less expensive to own the bartsia and her machine. Do think Chloe would fit the bill?

[@Gowaduv]

I love VLEDs! I replaced all the lights at the front of my Tundra and all the interior lights. Yeah the bulbs and kits are pricey but I don't have issues with blown fuses or melted connectors - and as you point out their kits are plug and play. I should see if they have this kit for my truck - your install demo is perfect

[@enriquebaquerizo2100]

Those lights are great I installed them on my ‘20 tundra front and rear in blue they look amazing!!!!

[@miamitreasurehunter]

Wow. I love your Channel. I am very soon to buy a Tacoma and you showing all the mods is so Uber cool. Keep them coming!!!

[@garyaaron8425]

Nice...somehow I missed this vid. Great narration and instructional.

[@saucyrooster]

Love those lights. Just picked up the 55K's to match interior lights. Thanks for the vids!!

[@fgialcgorge7392]

I actually use a kit I made myself that turns on with my dome light and has it's own switch as well. I went red on mine. A lot my lights are red in the interior because I really only use or notice them at night and red is really easy on your eyes. It also doesn't cast out super far which I like. I have outside lights in amber and white all around my rig if I need it anyway. Nice job and super clean install.

[@jandyke9995]

New subscriber here, traded in my 09 Taco for a 22 TRD OR. presently waiting for delivery. I love this mod and it will definitely be on my to do list. You have a great channel

[@armandchargois5733]

Great video young lady..I have a 2022 Toyota Tacoma Off Road,and I am very seriously going to look into these lights…you did a great job with the video! Looks great in your truck…

[@scottgorman7166]

The wire routing is different than her video....I have a 22TRD and the instuctions say go through the overhead light cluster and through the headliner down the A pillar. Surprised the heck out of me, but Im going to call them on Tuesday (after New Years) and check for sure

[@Brett431]

I want a taco truck and I'm living my dream through you. Lol.

[@soccertl]

Great mod and awesome step by step! Thanks. My Tacoma is on the way and I was thinking of getting blue to match my body color, but I will decide when it gets here next week.

[@dennishochwender8208]

Just an FYI, the 2016 to 2023 Tacoma Footwell light installation has changed. VLED changed it to plug into the overhead light. A very simple install still. Great job Chloe. They need you to do a vid for them on the new ones!

[@Telo_sicko]

I just ordered the new one, came in today. Does it still hide all the wires?

[@dennishochwender8208]

@@Telo_sicko It feeds behind the trim next to the windshield then down the pillar just as Chloe’s did. Easy install.

[@Telo_sicko]

@@dennishochwender8208 thanks! Easy install, love the way it came out.

[@iamkingrichard2032]

Thanks Chloe for the video. I installed mine today and it was easy because of your video. Keep making videos like this.

[@rogerhagler4340]

Always great content! I installed mine today, not sure if I'm a fan of the soft light that is on while the headlights are yet, but stoked none the less. I goofed and dropped my pen light down the A pillar crevice and spent 30 minutes fishing that out. Other than that install was straight forward. Thanks again!

[@TerryOwensBansheePA]

Awesome video, I ordered this and the rear add ons! Can’t wait to install once it arrives.

[@larryg4314]

They look great ,need those!. Love the channel 🤙🏻

[@raymondnieves615]

wow chloe these lights look great and clean install, am getting my set in blue because i have blue theme going on .P.S i didnt see the link in the video.

[@donaldsterling3844]

Have you any information about installing the FITCAMX rear camera on the 2022 Toyota Tacoma?

[@prescottosegie]

This is amazing I love it keep up the awesome work Chloe I love your channel I always learn something new about Toyota Tacoma they are my favorite😊

[@pookelaq]

How do these work with the meso puddle pods? Do they turn off when the door is closed?

[@itzpollixx]

Just picked up the kit with the 5500K lighting. As an added bonus ordered the interior LED lights kit (5500K) as well. Thanks for the video and idea!

[@BLtheP]

Great video. Hands down my favorite unique thing I’ve done to my Tacoma. Did it after watching the video and seeing the mega thread on it. And now I can easily tie in my puddle pods as well. Also did the VLEDS interior bulb kit too in 5000K which perfectly matches the tone of my floor kits.

[@smflyboy]

Great video! I’m going to try these in my Tundra. You make it look easy!

[@hillrunner2]

Demo was on point , great job enjoy your content. 😄

[@scottgorman7166]

I'm digging this Mod. My old Ram had the blue lighting through out and it was very cool. Im going to stick the blue ones in my 22 and turn down the output a touch. Nice informative video. By the way are you or have you studied automotive engineering because you are one sharp automotive young lady. Glad I found your channel.

[@troythompson5584]

Another great mod you suggested! 🙂My installation was different because my harness connected in the overhead panel; otherwise, it was the same. The hardest part of the installation was feeding the wire down the A-pillar and removing that darn red tape on the 3M tape. They even included a pry tool to remove the bolt cover on the A-pillar.

[@angelsalvador24]

my installation was the same as yours however courtesy mode has not been working on mine…is yours working fine?

[@alvilla56]

Hi Chloe, another great easy mod for the Tacoma. Question? Have you found a similar aplicación for the glove compartment? I hate that there is no light when I open it. Please let me know if you have any products or suggestions. Thanks.

[@jlippard52]

Great, I definitely want to do this. Thank you!!!!!!

[@charliefischer59]

I would love to see a long term review of these. I'm thinking about getting them but I wonder how long the adhesive strips last or what happens if one goes out

[@scottgorman7166]

You can buy a roll of 3M tape anywhere.

[@daveh3979]

I’ve had mine for almost a year and so far no issues. I did need to buy stronger adhesive tape. The tape that comes with the lights is not strong at all unfortunately

[@waywardson71]

Thank you for this I just ordered front and rear for my tundra 😎

[@boydbrown7395]

Another great product & another great video!!!

[@aaronschwieterman6705]

How did you remove the white clip that was attaching the harness to the A pillar? I cannot seem to figure that out.

[@busmanrc5020]

Thank you Chloe for a great channel and great ideas. You review and show some first class mods that I have put on my 2019 TRD Pro. These footwell lights are another example. Ordered them today. I like the look that I have in my 2021 Avalon Touring and missed that feature on my Taco, but no more. Now for a challenge, is there a mod out there for a heated steering wheel for those freezing days. Thanks for the great mods, keep them coming!

[@murphyflynn6471]

Man would I love a heated steering wheel too

[@bigED1013]

Great video . Pricey for footwell lights.

[@thetinkercook5430]

Thanks, Chloe!! You share such great upgrade ideas

[@kevinroque3662]

wonder what the closest color temperature is to the meso map lights.

[@AG4runner]

That's what I'm trying to figure out. Trying to decide between 5500 and 6000k or just go red since I have the map and dome in dual color. It's for my 4runner. I'd love a dual color option

[@GlobsOfDabs]

Can you show more about how you ran the 4 foot daisy chain connector through the center console to reach the passenger footwell light? That is where I got stuck

[@sweetpaka]

Great mod 👍Thanks for the video Will definitely order this for my Tacoma Mahaloz 🤙

[@smashing_data4292]

I remember installing an aftermarket CD player in my 99 Honda Civic Si in a parking deck at VCU in Richmond, VA. I got interrupted only once by parking security.

[@porschematt991]

You’re awesome Chloe. Lovin the channel

[@maikeli7]

New subscriber here. Thank you for your videos. Very informative and right to the point. I also enjoy how well produced this content is. 😎👍🏻 As a first time Toyota Tacoma owner, I am very interested in the modifications that you and others have made. Thanks, and keep up the great work! 😁

[@ChloeKuo]

Thanks for the support 😊

[@TacoVic]

You know there's a few viewers getting triggered when you say male and female connectors lol. Thanks for the video Khloe. Love your videos!

[@scottgorman7166]

Like your logo....screw em!

[@jtgamer14]

Is there a matching set for the rear footwells also? Lights in all four footwells would give an awesome glow.

[@ScottWilliams323]

you light up our lives!

[@YEYES-zt9rs]

I used LED strips and they automatically turn on when I turn the truck on; they'll stay on whatever setting they were last on. ran them under the seats instead though, so the light is pretty dim by the top front end of the footwell.

[@eurika7655]

Theres no factory dimmer switch on the 5th gen 4 runner right? My wife needs rock lighting for when she goes to he 4 runner at night in the dark. Make sure nobody is under the 4 runner. Would like to see a rock lights or such that works with her unlock feature on her factory remote.

[@zarch5986]

Awesome install! I love the OEM look! Do you plan to install the MESO puddle pods? Thanks!

[@ChloeKuo]

I have been looking at them!

[@bradgt5130]

Don’t the meso use the same plug tat she uses on the pillar. It’s been a few years since I installed them and I thought I remember per using that.

[@bryanmarquardt6512]

Can you make a video that includes the meso puddle pods and the V5 sequential turn signals. I've already installed the puddle lights and I just received the turn signals and I'm waiting for the vleds. No one has covered this yet I've looked everywhere.

[@ManuelGarcia-ui9zc]

Hello, the video is very instructive, but for the passengers behind, how could it be installed in the back of the front seats? Because I am trying for a 4 runner 5th gen please

[@graybeard2113]

It should come with small buckets of popcorn 😂🍿🍿 I may have to invest in those.. Appreciate you!

[@psycheeight082]

You should suggest that they make these “waterproof” and sell them as puddle lights like the VIP cars. Install them either under the vehicle or under the side mirrors. So when you walk up to the truck or unlock the doors, the puddle lights turn on just like you showed. I used to have that on my car. They saved me a couple of times in dark places, after it rained. I think I might do that instead.

[@npmartin]

Get the VLED LPR and tap it into your bed lights. Great for camping and hunting and it barely looks like you have a rear light bar.

[@Zurr0]

Was feeding the wiring from driver side to passenger that straight forward? Seems as if you woiod need some luck to get it thru that tiny hole without missing?

[@gewaado4520]

Chloe shout out to you !! Was going to get the turn signals but that can wait for the next pay check thankssssssssss

[@billysyms5761]

Really like how all these mods hook up so easy in the Tacoma's. These are cool but going on the back burner. Headight$, Tire$ and rim$...............

[@johnkolesar5542]

How do you use the provided screw driver to detach the harness from the white piece? I cannot find a tab or anything to remove like you did in the video.

[@JohnnyChimpo907]

What camera do you film these videos with? The image is always absurdly sharp. I love it.

[@UniquelyUsAdventures]

Sweet I’ve been thinking of doing this!!!

[@michaelwagner4033]

I really wish I knew about these sooner. I installed a driver-side grab handle about a month ago and screwing the handle into the bracket underneath the A pillar was such a frustration that I refuse to ever remove it again in fear of not being able to get the handle back on.

[@songhiep91]

Just ordered mine !

[@steverinehart787]

Nice upgrade to a great truck. Thank you for the new product information. Great video!!

[@reddottx]

Wow, really great job. Looks awesome. No trouble passing the wire from drivers side to passenger side? I could only dream it would go as smoothly when I do it.

[@AFGixxeR88]

These would look good in red to match the dual map lights from meso

[@scottgorman7166]

I just received my Aqua Blue footwell lights and was looking to install on my 22 TRD. However the instructions are saying to remove the center headliner light cluster clip into those connectors and route the wiring down the A pillar and under the dash. Any idea why the process would be different except for Toyota changing the wiring sequence?

[@CaliKeith530]

Thank you Chloe from Rhode Island! Love my plate lights cut out in reverse and now this. Just ordered....love to find front bumper light to high beam switch plug and play ....as opposed to cut and figure out...any leads on that?

[@cackleberryfarm4598]

With less expensive ones on Amazon, could you just tap into the line at the door switch and have them turn on when you open the doors that way?

[@andrewgonzales1018]

Enjoyed the install video. Good note on the battery disconnect. When the battery is disconnected, do you lose your radio settings? Can I use a 9 volt battery cigarette lighter kit used for saving the radio settings (like in other vehicles when they disconnect the battery)?

[@84agc]

Can you install the footwell light kit if you already have the Meso Customs puddle lights? I know we are already using the harness to tie in the puddle lights.

[@williamhebert3424]

I’m having trouble routing the wires through the pillar. Any ideas?

[@dbottita]

Watched video. About 3 minutes in I had mine ordered. I went with tactical red :). Thanks for highlighting this product, looks quality. One question, slightly unrelated… can you give some info on your fire extinguisher mount and how you like it? Thanks!

[@TheKingDorito]

Also, random question, but where did you get that extinguisher with the bracket? I love the pull pin release over the clamp style

[@saiga129]

Nice video. I don't know if the footwell lighting is for me. Today, I watched your video 'Taking Off My Stock TRD Off-Road Grille' a bunch of times as I was changing the grill on my Tacoma. I got the grill with the four orange LEDs.

[@edi5851]

Those look great! Wish they also made some for the 2nd gen. 3rd gens get all the cool stuff lol

[@Yankeefan78471]

A prototype is already in the wild and we’ll be getting a 2nd Gen kit on the market later this year!

[@johnhodnefield2095]

How does the Puddle pods adapter and the VLED adapter fit underneath the a pillar trim? Is there enough space?

[@scooty67]

Love it thanks! Now I need lights for the bed and brighter for the overhead. LOL

[@ridgieproductions1219]

I've tried to find that TRD start stop button and doesn't appear that they are sold anymore. Do you have any suggestions?

[@allandenola5968]

First class stuff and installation

[@porfiriotoro6650]

Have you happened to have a part # for speakers adapter and wiring. In addition to speakers brand and wattage. Twitter as well. Thank you. You have great videos that I have used for my truck mods. I have a 2019 Tacoma XP .

[@h2beezy2]

Did this mod, now my upper cabin lights don't work, dome, vanity, and map lights all off. Checked the dome fuse 7.5A under driver side dash, still good. Any ideas? Gonna probably rip out the bypass harness and see maybe it's a bad harness?

[@Mike-4547]

Thank you for the video quick question will these lights come on if the map lights are off?