Automobiilista 2 VR Guide | 12 FPS BOOSTING TIPS! | Quest 3 & 2 Link

[@carlosangalang]

Thanks for the launch option! Now I have control of the mouse again

[@filipetkd]

Excellent tips mate!! Ill try that on my quest 2 with my rx 6750 xt.

[@stevejones3868]

I thought I had it all optimized, but this has taken it to another level. I didn't use all of the suggestions. I have an RTX card and I didn't use the oculus tray tool and it still looks great. Good work fella!

[@Stent.Tech1]

Thanks for sharing!

[@stevejones3868]

@Stent.Tech1 Tried LMU in VR for the first time yesterday and that looks even better straight out of the gate. Even without any game tweaks.

[@elguitarrista1]

Good video, there are a few things here that i havent tried myself. I will check it out. Do you mind telling us your which gpu you have? I have an AMD6950xt and am currently running lower graphics options than you

[@Stent.Tech1]

Hello, thanks for reaching out. I am fortunate to have an AMD 7900XTX 3D GPU as well as a 7800X3D CPU. You may find that you need to set game details to medium/high. However, combining all these steps should bump up your FPS.

[@schmagoogly]

Vinaigrette: No 🤣🤣 But in all seriousness, thanks for the super helpful guide!

[@Stent.Tech1]

LMAO! I didn't even notice I said that. The most delicious of settings.

[@TheRealValzar]

can u do one for Virtual desktop + VRChat??

[@tommasosa]

But AMD fluid motion frames should only work in fullscreen mode.. Can you confirm that it works in VR?

[@2ndLastJedi]

MSAA high is a big hit on performance and imo not a great visual improvement if any over medium. I run a 4090 and prefer a higher resolution. But i do dislike aliasing alot but medium is enough for me.

[@Stent.Tech1]

Thanks for the tip @2ndLastJedi! I did lower MSAA to "Medium" and I don't really notice a visual difference. Runs smooth!

[@Chris-tu3xx]

I have a quest 3 wifi 6 to my router. It is smooth and I don't go anything higher than 72fps. I use virtual desktop with all settings maxed, including godlike visual, snapdragon sharpening, sharpening increased 100%. Besides it looking like 8k performance, the only problem I have is the quest 3 screen. It's fantastic already but it is limited to it's pixel count just like any other headset. ams2 settings are all maxed out. I turned down msaa just because it blurs it and I prefer low. With this setup, It is godlike beyond the oculus software and tweaks offerings. The other issue I have with virtual Desktop is if steamVR is not setup to direct rendering, launching the game will have no sound. solution is to use the mouse on the desktop and left-click the game window screen and the sound will return because you focused on the window. Solution is to go into steamVR and developer and enable direct rendering. 1.5 supersampling is way enough. FUnny thing is you can run SS at 70% and because the software and hardware of virtualdestkop is that good in keeping visuals looking like 8k, you can gain so much performance.

[@FuNzZyPT]

You only use virtual destkop?no steam vr?

[@Chris-tu3xx]

@@FuNzZyPT You can launch the games in virtual desktop but if your client settings openXR is set to auto, your game will run at 1.0 SS which is fine because virtual desktop is really good at making everything look crisp even at .5 ss. if y ou force openXR to steamVR, then it is based on the SS on steamVR. I run my openXR runtime with SteamVR. I noticed some games will not work on steamVR where running the OpenXR runtime at VDXR does work fine on some rare old games.

[@FuNzZyPT]

@ im using steam vr and very disappointed

[@Chris-tu3xx]

@@FuNzZyPT It's okay. wifi 5 has issues. wifi 6 is the way to go as long as you are in the same room of the wifi that is connected ethernet to the pc. I have a wifi 6 mesh system by the almost to be banned TP-link. I had to do some modifications to the default to get it to work perfect. I can play from my backyard now. SteamVR link software is not that great but you do need to have a wifi6 system and pc connected to the Ethernet of the wifi router. The wifi6 bandwidth all needs to be in the middle settings because for some odd reason, the quest 3 has issues connecting to the wifi6 if the bandwidth is high up on the bandwidth and channel.

[@Stent.Tech1]

For this sim I just use the Meta desktop app and launch with the Meta/Oculus VR option when i press play from my Steam library. I use Virtual desktop for VR games that don't support the Meta Desktop app nativly. Like MS FlightSim2020 and Half Life Alyx.

[@steffendetrick]

I don’t know how you guys are maxing out you Rez. I have a 4090 with a 13700 with re bar enabled 64 gb ddr 5 and I can’t max out in game settings and resolution on the Quest soft ware.

[@arenam79]

oculus tray tool or ocukus debug tool. I like the tray tool better

[@steffendetrick]

@ I use the debug tool haven’t used the trade tool

[@arenam79]

@steffendetrick turn up the super sampling to 1.5- 2, then the f.o.v to 80/80, encode resolution to like 4040 then the encode bitrate to 600 and dynamic bitrate max to 940. I have a 3060 laptop and obviously I can't go as high as I suggested for your card but I can definitely crank them all up and its a beautiful crisp playing experience. Same options for debug tool as the tray tool but it seems to work better with the tray tool. Enjoy!

[@steffendetrick]

@@arenam79 so I use debug tool and the tray tool together or is it one or the other? And thank you!

[@arenam79]

@steffendetrick one or the other