I just wanted to paint my PC case with rattle cans! What am I doing watching this whole video and subscribing?! Immaculate workmanship 😊👍
@StevenLeahyArt2 жыл бұрын
Loved the small tech tips that you would never think of like keeping dust and dirt off the hose. Small things that save big headaches.
@CreatexColors2 жыл бұрын
thanks for watching and letting us know the tech tips are helpful.
@MatteLson662 жыл бұрын
You’re really stepping it up here. Nice to see a full, start to finish, custom paint job! Came out really good! Suddenly, I miss my garage.. Custom paint is what I do during the winter months.
@CreatexColors2 жыл бұрын
thank you
@Zed32_Customs23 күн бұрын
I hope that magnum has gotten some proper bling wheels since yall filmed this! Super cool, i aspire to do this sort of thing.
@allanbrowne1112 жыл бұрын
Mate, another great vid. Very informative, and a great way to show what the products can do, and what can be achieved with a plan and following each step to completion.
@niconine268 Жыл бұрын
Such wicked graphics bruh & such passion. Wrapped with such finesse. Damn I'm jealous
@jimstutz2009 ай бұрын
I remember watching my Dad when I was a kid do this like 45 yrs ago. He also did coral and woodgrain and photo transfers . I was fascinated ! Thank you for the memories
@CreatexColors9 ай бұрын
Awesome, thanks for sharing.
@FTWBIFY66672 жыл бұрын
Looks amazing! Great helpful video! Great tips to help out with trying that effect
@CreatexColors2 жыл бұрын
thanks for watching!
@wulee48802 жыл бұрын
Sehr schönes finnisch , der Lohn für den Aufwand mit der maskierarbeit . Dieses leuchtende Grün, ist immer wieder schön anzusehen 👍👍👍🌟🌟🌟🍀 . Danke sehr für dieses Video 👍🤗
@CreatexColors2 жыл бұрын
Thank you for watching!
@minionsonly6319 Жыл бұрын
Loved watching this from beginning to end. Tips were great, and overall outstanding!
@CreatexColors Жыл бұрын
Thank you!
@kaiskustoms822 жыл бұрын
Nice job 👏 A whole lot of work, but that poison green candy pops super nice in the sun!
@CreatexColors2 жыл бұрын
thank you
@niconine268 Жыл бұрын
Damn. That's some hardcore masking work. Superfine.
@CreatexColors Жыл бұрын
thanks for watching!
@QwikVidz Жыл бұрын
Masterful work. Youre a good teacher too
@finalaccuracy76952 жыл бұрын
This was a great series
@CreatexColors2 жыл бұрын
Thank you!
@bigmike8808 Жыл бұрын
Holy moly that thing pops! That textured under shadow contributed a lot. I didn’t like the paint splatter on the car’s base color though. On the graphic looked great, I guess that’s just me but overall it’s a huge yes for me!
@CreatexColors Жыл бұрын
Thanks for watching!
@bigmike8808 Жыл бұрын
@@CreatexColors oh man are you kidding me? I watch EVERYTHING you put out!! Thank you for doing what you do! It helps me out a lot!!
@itz_lexiii_ Жыл бұрын
Amazing paintjob. Looks WICKED ;)
@CreatexColors Жыл бұрын
Thanks!
@davidr43322 жыл бұрын
Looks pretty awesome the way that been done .
@CreatexColors2 жыл бұрын
thanks!
@richardgossett494 ай бұрын
Can you shoot the metal flake aerosol over a factory black base then shoot the blood red pearl over it with your k2 high gloss clear to finish it.
@acmechris11 ай бұрын
Thanks … for years now I’ve been looking for a “green” . A candy green one that is warm, very warm. So why is yours so warm? Also I never use black, you know energy killing BLACK. I was taught (l taught myself and I did study color theory in college.)to use a very very dark green, blue or violet. So dark that it appears to be black. But next to a contrasting color and could be very very vibrant. And I like POP BAM AND ZING! Eye candy yes indeed. Thanks buddy.
@CreatexColors11 ай бұрын
Totally, always bet on black.
@adolfolopez2609 Жыл бұрын
Love the video, very informative as always….really dig the green!! What I want to know is, where can I get the stencil that you used?
@barryschneider73142 жыл бұрын
Great look on the finished product, excellent videos! What’s your background? You have a great grasp of the technical side of paint but also great artistic sense?
@keepsteddy2 жыл бұрын
can you sand Candy 2.0 ? I mixed it with 4050. and it has been dry for a few days. I was thinking of using a 1500-2000grit before 2k automotive clear.
@CreatexColors2 жыл бұрын
candy2o mixed with 4050 will shave when sanded, however it is not recommended as the sanding scratches will be visible in the final finish, even if subsequent coats are applied as the edges along the sanded area will be a darker value. We never sand candy2o before applying the 2k clear. Thank you.
@keepsteddy2 жыл бұрын
@@CreatexColors thank you for replying
@side77kdaral2 жыл бұрын
Excellent Work!
@CreatexColors2 жыл бұрын
thanks!
@rdcustomdiecast2 жыл бұрын
Awesome finish
@CreatexColors2 жыл бұрын
Thanks for watching!
@ydnarmandrake73252 жыл бұрын
Great video & Great teacher 👍
@ryurc3033 Жыл бұрын
So one thing I noticed while you were spraying the flake effect coat....there was a slight flair back over the entire panel that just got Painted, are you dusting on a more uniform layer, or does that blend the overlap?
@CreatexColors Жыл бұрын
its for blending, thanks
@Jose-vj7fe Жыл бұрын
Amigo una pregunta as usado hause of kolor mármol porque se desprende o delamina???? Gracias
@CreatexColors Жыл бұрын
Createx paints including candy20 are used in this project as they’re much more durable with better adhesion compared with HoK. Thank you.
@Jose-vj7fe Жыл бұрын
@@CreatexColors gracias 🙂
@MatthewScott2 жыл бұрын
Who makes that stir stick? Black plastic with holes?
@kr25137 ай бұрын
I was subscribed to this and it unsubscribed wth. This guy is good
@CreatexColors6 ай бұрын
thanks for watching!
@richg40512 жыл бұрын
I'm haveing problems with Createx paint drying to fast. I got some Createx retarder and put a few drops in it did help i just wanted to know what are proper amounts i should be using. Thank you.
@CreatexColors2 жыл бұрын
5607 Retarder is a very specialty product, seldom recommended, to assist flow and reduce tip-dry when painting in arid conditions. Add very sparingly, perhaps a drop per 1oz. 5607 can inhibit drying and curing if added in excess amounts. Thank you.
@Jose-vj7fe Жыл бұрын
Excelente trabajo🎉🎉🎉
@CreatexColors Жыл бұрын
Gracias!
@goaliedadairbrush7053 Жыл бұрын
How long ( time ) was it from final coat of candy until it was 2k cleared? Have to be under 48 hrs because you can’t scuff candy?
@CreatexColors Жыл бұрын
candy2o is never scuffed prior to paint. No Createx pain requires scuffing prior to clear. This paintjob was done in a heated booth so after a cure cycle, it was ready for clear about 4-hours after application. It painting in an open environment longer time is required, which can be up t and exceed 48-hours. There are no time windows for when to top-coat Createx paints, including candy2o, can be top-coated any time after the paint thoroughly dries., and can exceed 48-hours drying before clear without having to be scuffed. Thank you.
@terrykonrad12432 жыл бұрын
So,so BadAss. Awesome explanation for us rookies. What pressure do you spray when using your LPH80?
@CreatexColors2 жыл бұрын
Hello. Always spray at the spray-gun manufacturer's recommended setting. For our HVLP set up with a E4 cap and 1.2mm tip, inlet psi is 18. Believe the range is 16 - 18 psi. We usually use the higher end of the recommended psi settings. Thank you.
@stevenbamber23972 жыл бұрын
Would scrunching up a plastic bag achieve the same affect
@CreatexColors2 жыл бұрын
It will work, with a different texture effect. Here, the longer layout of plastic wrap flowed well with the long, straight lines of the vehicle. Make a test panel comparing the two effects (scrunched vs. stretched) and see what you like best. Thank you.
@stevenbamber23972 жыл бұрын
@@CreatexColors cheers guys nice one from 🏴
@frogmanpipes95612 жыл бұрын
Could you give me some advice when to pull tape. Do you always pull right after you spray? Or should wait a certain amount of time? Do you remove it dry? I struggle with this all the time. I'm always pulling paint or getting jagged edges.
@CreatexColors2 жыл бұрын
Pull tape after paint has dried matte and tack free, but before it has fully cured. With Createx paints, tape is usually removed 4 - 12 hours after application, but sometimes longer depending upon technique. Using a quality tape that doesn’t leave adhesive residue helps keep this process clean. We use 3M and FBS tapes. Thank you.
@GODLOVEYOU72 жыл бұрын
I'm try to Cady paint hot pink wthi ligth PINK BUT ,what candy did you recommend for the that job, oh I'm studen .could you give me help me
@CreatexColors2 жыл бұрын
Please watch our how-to make a candy pink video, kzbin.info/www/bejne/eouckpWho7WqhZY, which is best applied over either 6013 Silver Sealer, www.autoborne.com, or W360 / W360 Metallic White, wickedairbrushcolors.com/pearl-and-metallic. Thank you.
@greggirard3902 Жыл бұрын
What are the tubes in the top corners of the booth with the holes for?
@CreatexColors Жыл бұрын
Its a drying system made by BECCA to enhance air - surface contact during the booth's cure cycle, thank you. beccainc.com/product/flash-dry-rapid-drying-system-waterborne-solvent-paint/
@Woodworks-zd7iw2 жыл бұрын
i have some duplicolor paint shop lacquer clear leftover, can i spray this over createx paints?
@CreatexColors2 жыл бұрын
Please make a test panel before using this clear. When applying a solvent-based clear, we most often recommend a catalyzed urethane or epoxy clear. Thank you.
@SernaKustomz... Жыл бұрын
What supernova gun is that
@Palacios297 ай бұрын
Can I use urathane as top coat ?
@CreatexColors6 ай бұрын
Yes, a catalyzed (2k) urethane clear is the recommended top-coat for Createx paints for automotive paintjobs. Thank you.
@niconine268 Жыл бұрын
Love that stencil at 33.04. Did he say TH1 ? That effect for me looks so not contrived in its randomness. I prefer that. As with the clingwrap job so expertly done. I hate when stencils or effects are like uniform or follow an obvious pattern as in laundry bag effect. That's just so damn obvious
@CreatexColors Жыл бұрын
Yes, an Iwata TH1 was used. Thanks.
@darinhill5351 Жыл бұрын
How much material did you use total on this car ?
@CreatexColors Жыл бұрын
Total sprayable volume (primer, paint and clear) was probably in excess of 5 gallons, with most of the volume coming from the AutoBorne Sealer and 2k clear. Thank you.
@theintake8961 Жыл бұрын
Great video! I'm a rook so i had a hard time following, but I still appreciate your art work? Thanks for the video 😎👍
@CreatexColors Жыл бұрын
Thanks for watching!
@andrewstoffel11702 жыл бұрын
👍👍 I’m sure a lot of the fine details and effects are lost on the camera, you have to be there to see it. 👍👍
@CreatexColors2 жыл бұрын
Thanks for watching!
@anthony-me1wu Жыл бұрын
how much would that cost ??
@CreatexColors Жыл бұрын
the total cost of Createx paints was about $500 sprayable, plus ~ $300 for 1-gallon of the 2k urethane clear. thanks
@fulltiltboogie5321 Жыл бұрын
That’s pretty sexy and badass!! Great job!
@CreatexColors Жыл бұрын
Thanks for watching!
@diamonddetails94452 жыл бұрын
Awesomeness 💯
@CreatexColors2 жыл бұрын
thank you!
@johnhusband2364 Жыл бұрын
love your videos and the tech detail you go into, but JMHO the flicked paint ruined the job it looks like some one spilled paint on it. maybe kept inside the Graphix could have looked better .
@jones0153932 жыл бұрын
How do I get incontact with you need my truck candy paint
@CreatexColors2 жыл бұрын
We're not open for commercial paintjobs. Thank you for the interest.
@richardmckain3576 Жыл бұрын
lovin this we used to do these in the eighties you can use aluminum foil to achieve the marble affect also
@scoobee9 Жыл бұрын
Pinstripe really pops the whole thing
@CreatexColors Жыл бұрын
Thanks!
@TheGoshood Жыл бұрын
Sweet
@CreatexColors Жыл бұрын
Gracias
@GODLOVEYOU72 жыл бұрын
Blessings
@CreatexColors2 жыл бұрын
thanks for watching
@uncleknife9887 Жыл бұрын
Cooltex!
@CreatexColors Жыл бұрын
thanks!
@mattthcfocus42077 ай бұрын
you needed to squat the car for a clean finish>bwahahahaahha
@jptazzairbrushingjprice72502 жыл бұрын
Cool skull squad in the house.
@christopherburton18422 жыл бұрын
Looking it
@yourselfdotcomlol7 ай бұрын
So sick. You are really good man
@CreatexColors7 ай бұрын
Thank you for watching!
@JohnDoe-to2kv7 ай бұрын
Love the Paint. One thing I always wonder about what if , God forbid. there’s a small fender-bender which requires a partial respray? I’m talking about the job of matching and the extra cost to the insurance. Just saying…….
@CreatexColors6 ай бұрын
Custom paint comes with its own risk & reward. Thanks.