BMW FUEL RAIL PRESSURE SENSOR REPLACEMENT BMW F30 F31 F34 320i 328i

[@AutoRepairGuys]

Products that we use and recommend: ► Fuel Rail Pressure Sensor: amzn.to/3geXq5j ► Ignition Coil: amzn.to/3hQlDPF ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@apexgruppe4284]

Good video! You should break down the list of parts/tools needed in the description. I would also recommend installing the new part and sharing torque specs as well.

[@BergGarcia]

thanks for you help brother 🙏🙏

[@WhatUpTKHere]

any guide on how to change the fuel quantity control valve on the N47?

[@turbowarrior44ashg24]

Do these need to be re coded in or is it just plug and play thankyou

[@mehdirashidi3330]

My service engine soon light came on, and I scanned the car using the foxwell diagnosis tool for BMW. There are two fault codes: 2BC0 and 2BF4. The 2BF4 is associated with rail pressure sensor (the one that you replaced here), and 2BC0 is related to the lean air-fuel mixture. It seems like both fault codes are related to this sensor. I will replace the sensor and let you know how it goes. Cheers mate!

[@stevenparchment2]

How did it go?

[@mehdirashidi3330]

@@stevenparchment2 Did not drive the car for several days, and then the "service engine soon" light turned off on its own. I was initially suspicious since the "service engine soon" light appeared simultaneously with the "low beam light malfunction" message. When I checked the headlights, there was no sign of malfunctioning. I had no issues with turning on the car either (which can be related to the pressure sensor). The scanner gave me two other fault codes E2C7 (CON: K-CAN communication fault) and E2D4 (terminal status 0X130 faulty). All of the codes might have been due to the car battery. The "low beam malfunction" message got disappeared too. Anyway, I got lucky this time :). These German cars are too smart for me :D

[@yvenelluxama764]

What size adjustable wrench are you using

[@burinezemilio2096]

Perfect job! Bur i have a question. What is the residual pressure must be in the fuel rail when car calm down about 25-30 minutes? If i understand correctly, it's musnt be a zero. If you have this information, please let me know number or psi or kpa's. F30 328i.

[@mattuso]

How do you test the fuel pressure on this car?

[@JoseRomero-rb5fv]

What code or problem was doind? Mine says fuel system continued driving but all performance not working

[@anobody3116]

What did you do to fix it?

[@Dirkster2509]

where did you buy those cover Rauls

[@armandcalifornia8276]

Where are you guys located in LA???

[@gskullunruly2635]

Where does that located on a 2007 bmw 328i e90

[@timothyortega1982]

Would the car not turn on if this is faulty?

[@Fury114]

Здрасти видях знамето, българи ли сте?

[@faziuxxx]

Hello i got bmw 116i n13 engine.car had problem i had fault with valvatronic valve and fuel pressure problems.i replaced valvatronic now only one fault 11a002 hpfp presure to low on live data presuere jumps between 600-1200 psi.and its hapens only when car is cold gives random misfire .when its warm no problems at all.what can it be hp pressure pump?

[@sahaktumanyan5349]

What is HTR sensor?

[@dougjamesvandals]

No codes for our 2014 x4 just shuts off and says low fuel pressure...on the screen ..we wait then it starts and runs fine

[@salkhan1950]

Hey I have two codes on my 2014 bmw 328i xdrive f30 p1290,p0087

[@salkhan1950]

I’ve have gotten the waste gate replaced , timingchain done 5 k miles ago

[@zequihernandez4751]

Have u fixed these yet

[@zequihernandez4751]

I got code p0087 am confused on replacing the sensor or the whole rail

[@vickram4303]

2014 bmw 428ix got code p3195 any word.

[@stevensims3554]

My bmw 328i f30 has been giving me low performance I initially thought it was due to needing a tune-up so I did it my car has run out of gas a few times with the predictive miles left in tank notification on my instrument cluster screen saying 10 miles left I've been on the freeway pushing 80mph and up trying to get to the nearest gas station and my car give out on me and I get the system malfunction possible drive train damage if you continue when I turn the car off usually I'll be able to turn it back on and continue a lil bit til I get to a gas station I went to autozone and the diagnostic test said hpfp low pressure in the hpfp system code was something like P154/3 so what's your thoughts I'm trying to tackle the issue possibly by myself or with a mobile mechanic I know who knows cars and engines cars been acting up like this for as long a probably 2 months I've had the check engine light come on and later was stored after one of those events were I ran out of gas around 10-20 predictive miles left in the tank I watched a few videos on replacing the hpfp some said if my vehicle was made before March of 2014 I MUST do a configuration modification to the adapter port I believe or the electrical wiring system if I'm remembering correctly is that necessary and do you believe just replacing the hpfp sensor will be the remedy to my problems?

[@salkhan1950]

My car did the same thing

[@andrew6780]

Howd u fix it? ​@@salkhan1950

[@jamiuadewale1301]

I think u should always let people no why changing any party, like may be the car is jerking hesitating

[@hurrican11Bpoint]

🎉

[@Jose-ew6hj]

P0001?

[@henryarrey1812]

Same code.p0001

[@jafarhon]

Dude, sorry but u spent half of the video talking and promoting. To much talking