Aviation Tools Training - AN type fitting on a Medium Pressure Hose

Рет қаралды 50,506

Күн бұрын

This video shows how to install and remove a Stratoflex 300-6S reusable fitting onto a #6 Stratoflex 111 hose. Stratofex 111 is very similar to Aeroquip 303. This is a medium pressure hose, with an internal steel braided jacket.

Пікірлер: 43

@KamoniWells-Mendez 9 ай бұрын

Prepping for my A&P and this will be my guide. Hoping to get the rigid line practical but if a flexible hose is what it shall be, so grateful for this!

@tdkdelta4068 7 жыл бұрын

Hey man, I am prepping for my practical exam (first time around, taking general and airframe) and this is a godsend. Thank you for your guidance!

@ColemanCovers 3 жыл бұрын

how did it go

@FuzzyZit 8 жыл бұрын

Holy crap you have the ultimate tool to flip people off. Epic

@Aviyaytor 4 жыл бұрын

Thank you for the hose fabrication video! 39 years in aviation and I’ve never fabricated a hose.

@danceswithclouds 2 жыл бұрын

What a treasure trove of videos! I am so grateful you made them. Small world too…I recognized the SIU on your shirt. I have been to SIU many times when I attended board meetings of the CAFS. I was a Boeing engineer then, now retired and studying for my A&P exams. These videos are awesome.

@titaniumdiveknife 5 жыл бұрын

Nice mandrill, man. Your LDGs made my heart 💓 skip a beat! My goodness they're tidy.

@lowifrles9813 4 жыл бұрын

Doing Aztec hydraulic hoses about 12 Thanks for the great instructional video!

@willin2 Жыл бұрын

blood makes a good lubricant, LOL! well played man & nice work on the hose assy

@RizwanKhan-ee9lx 5 ай бұрын

This deserve million view❤❤

@lewisj856 9 ай бұрын

This was an awesome review, thanks for sharing! What tool would you recommend for pressure testing the hose?

@GamingwithGamerGirls 3 жыл бұрын

The yellow, anodized part is called a socket. Also, once the hose is bottomed out in the socket, you are supposed to back the hose out of the socket 1/4 turn.

@Eric-zq3vl 6 жыл бұрын

Very helpful, thank you sir.

@nathanpeck4843 3 жыл бұрын

Thanks for the help. Nice video.

@Sun-dh5ji 6 жыл бұрын

my question is: how do we install a 45 degree or 90 degree fitting? The fitting you show on this video is a straight one, that you can push down with the tool, but for a 90 degree fitting, you cannot push it anymore, what would be the trick?

@josuepaz7617 6 жыл бұрын

Do you have a video on repairing scratchs and nicks on ridge fluid lines ?

@GamingwithGamerGirls 3 жыл бұрын

If your fingernail catches on the scratch or nick, it's probably out of limits. If not, you can use aluminum wool or a burnishing tool.

@matthewroesger387 Жыл бұрын

Hi, I love your videos for learning about fittings. I have a huge number of old fittings (37 degree and flareless ) I am trying to identify. Can I send you some?

@GamingwithGamerGirls 3 жыл бұрын

I have worked in GA, Corporate, and Cargo Ops, and never had to fabricate a hose or even a rigid line.

@civick2052287livecom 3 жыл бұрын

Thank you

@peterclemmins7099 3 жыл бұрын

Thanks buddy!

@jbutah Жыл бұрын

I am having issues with the hose spinning when I use the mandrel to install the nipple and nut. Is there any way to prevent the hose from spinning?

@asianpurswazn 6 жыл бұрын

hi, nice video! can do you one with fabricating a bonding strap cable? thanks

@Cjackson6672 6 жыл бұрын

My teacher gave me this project as part of a final grade, he said I cant put the socket part in a vice or I'll fail, and that he'll be able to tell if we did put it in a vice or not. anyone know any other ways to get this done?

@garrettbrittle1428 2 жыл бұрын

Link to the mandrel I’ll need?

@cowboycapitalrealty 3 жыл бұрын

Thank you for your video. How would a -8 be done?

@gustavocalderon5833 8 жыл бұрын

Hi, any video for how to make or install a MS fitting (tubing)

@trollgod4911 7 жыл бұрын

This guy must be an expert at flipping ppl off

@1donagin 7 жыл бұрын

kzbin.info/www/bejne/bXS8iHqQqL2WnrM

@TyPrince230 5 жыл бұрын

How do you know how long cut the Hose in Length

@1donagin 5 жыл бұрын

Measure the existing hose - or if that can't be done - measure the distance the hose must span and add 5% to 8%. The 5% to 8% extra is necessary, because the hose contracts as it is pressurized. For very low pressure, use the 5%. As pressure nears the top of the rated pressure of the hose, go to the 8%.