How To Make Welding Table

[@BlueDroneBlues]

I was loving how simple this was. I did feel it was criminal using crap particle board on that gorgeous table! On the wheels I was surprised you didn't just tac weld the wheels? Later on I hope after watching this video I can build a table like this. Big plus when you show how you welded this beautiful table and didn't need an expensive welder to do the job. Amazing job sir!

[@azrael6082]

easier to change the wheels later if they arent welded on

[@capozzi1984]

great job !! compliments!! 👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼 how thick is the iron of the bars?

[@DKesic1984]

Konačno nešto iz Hrvatske da valja! Korisno, precizno i oku ugodno. Čestitam!

[@AVmake]

Hahah,hvala na ljepim rijecima!

[@baska1712]

I ja kažen, svaka čast💪🏻😎

[@pcelarskaradionicaopgninko6296]

I ja kazem svaka čast...prepozna posa po elektrodama...🥂🍺😀

[@HouseMadeUS]

Awesome build, I need to build something similar and this gave me a bunch of ideas. Much appreciated. Thanks!

[@lancestancliffe4885]

Now I’m seriously jealous, that’s a very well made table. Have watched quite a few welding table builds and this is the best on the tube.

[@mytube3687]

Simple table , very nice and economy to build . What is missing is material list and sizes . I mean like thickness of the profiles, sizes of profiles.

[@MrSrtman18]

This was a hell of a table you made! I bet you feel great about it, you should! I dont know that i would have put wood on it. You could have done the same thing with small gauge steel. Great job!

[@yaque]

Perfecto! Saludos desde Argentina.

[@jamest.anderson3190]

Thank you. That was pretty awesome. I'm just outfitting my garage and don't habe a ;oy of room or a ton of money and that table is PERFECT for my needs. Again, THANK YOU !

[@ozacuna4026]

Great project and looks superb.

[@fgarza]

Great video, I'm getting a little welder for father's day and I want fix my current woodworking tables (3ft each) they can't take the weight. This game me the idea to make at least one small one for welding. Or maybe just build smaller ones to move around.

[@anttihietala3836]

Jesus it must have taken a while to finish those caps :D

[@genkidama7385]

do you even take the thermal distortion into account ? after yu weld all those tubes the main structure is bent, because you didnt use any fixture.

[@vertenteartes]

Very Nice. How thick is the plate?

[@omarbaalwi3544]

Excellent experience but should be white out wood should be all metal. 👍👍👍👍👍👍👍👍

[@midhatkhatib7286]

What is the size and thickness of the iron used? Thank you

[@scratch6897]

Are you using 7018?

[@4real4now]

Al these videos are good. What I don't understand is why some of you don't want to use the proper protection. At least get some welding sleeves and some long pants.

[@robertwillemsen368]

Stick welding! Great job!😍

[@VUESPACEQUIET]

ok ! can i have exact all measures and spaces of this table. thanks.

[@silvyyr]

What size material did you use on this?

[@TheMoomba19]

What was the total build time?

[@carlodevivo2928]

how thick are the steel tubings? is it 3mm ?

[@mahadevaswamykb9775]

What company is welding machine?

[@reelwolf9474]

pozdrav od makedonija , sega pocvam da se ucam da varam ista masa sakam da napram ko tvojata, mozit da mi kazis dimenzii na cevkite?

[@nicholaslyfook6382]

What do you use to keep the metal in its raw state?

[@ehsanmorav]

W-40 oil spray

[@wolk730]

Добрый день, стол просто 💣. Не вело его? А можно пожалуйста размеры

[@ЕвгенийСамойлов-л3с]

Excellent job. Thank you for the video! 👍

[@KE6GMZ]

Nice table, I'll probably build one very similar but that's a little more dead tree than I'd be comfortable with around a welder. I'd probably swap it out for light sheet metal or expanded metal grating.

[@martinsimunic9303]

Nice build. Great idea. And glad to see a stick welder on maker channel. :D

[@AVmake]

Hvala!😀

[@timsaveneh567]

Yes, I was shocked! No TIG, no Lincoln MIG, no bandsaw! Used ARC and a hand grinder. Shows anyone can DIY this for sure! Very relatable, well done!

[@Josh-mi1qt]

Nice work. Mind to give me the dimension? Thks a lot

[@bencoelho3]

Thanks for this video. You've given me a ton of ideas to build my own one.

[@mr_torx]

Wow, great job!!

[@shooterilok3226]

Krasan stolić .. pretpostavljam da su cijevi gore 4*2. Daj mi molim te reci samo koliki si razmak između njih radio za stege. Hvala

[@SMOKEY-JAYS-DIESEL]

Awesome work brother 👍

[@igorrau8696]

Это лучьшее что я видел👏👏👏👍👍👍👊

[@mariojhorge23]

Dat was a lot of job, Well done bruh. Remember the PPEs

[@JOmskiiTV]

Nice work. Can i ask for the measurements?

[@tombrenes2411]

Add a bracket to hold clamps, squares, magnets and grinders

[@dimondimon9101]

Хороший стол, класс

[@juanvelasquez9114]

amazing work!!!!!!!

[@k9cop998]

Awesome job until you put the wood on it. Should have only used metal. I have seen a few where for some reason they used wood. One caught their shop on fire around 3am. Nothing left all burned. They did have security cameras that showed the bottom piece of wood smolder until it became a flame. They lost everything cause the owner used wood on part of it.

[@mauriciomorenorivera]

As a matter of fact, few days ago was soldering in a wooden workbench. I forgot a towel with thinner used to clean my metal, went to lunch until I smelt **and saw** the smoke coming from my workshop. Quickly I used a large towel and keep the fire off. After 15-30 mins my table was caught on fire. Moral of the history, no wood or flamables near soldering tools nor hot splatter.

[@raulduke85]

nice, but in my opinion you should separate the table from where you put the welding machine, grinders and all the other stuffs, since you grind on your table, so you will have metal powder falling on your welding machine and on the other things u put under your table and that's not good

[@rwat1106]

in planning out my own table, I've thought about an upright for hanging grinders and such

[@sophiaholt1458]

I agree welds and tools cost to much to not protect better.

[@nathanblanchet2648]

I wish the table I use my everlast welder on was that nice. Well done.

[@phillipchambers8487]

I have NEVER seen anyone use Wood on a Welding Table!!! But, when you Weld while being half Naked, then what the hell, right. Might as well live toatlly on the edge

[@cervanteshugo]

i totally agree with you jajajajaj

[@OldJoe212]

Great looking table. I've also welded in shorts and shoes w/ no socks. I wouldn't recommend it but it can get exciting at times. What would you say this table cost.

[@MaxMakerChannel]

The video is very nice. The table and the closed ends look great! But OSB?? Horrible!!!!!!

[@abitoffblacksmithing9985]

Dude that's pretty tight!

[@ilROSS]

you did a great job!

[@marcosfugiwara3238]

Excelente mesa de soldar, parabéns 👍🇧🇷🇧🇷

[@marceloferreira6699]

Pena que usou madeira , isso é perigoso . Só acho

[@АлександрКачалов-ц3ж]

Стол неплохой. Главное, чтобы профиль не повело. А вот варить в шортах с голыми ногами - совсем печально.

[@ИннокентийЦой-п2р]

В шортах варить особенно если китайскими электродами я думаю это верх блаженства ногам)))))

[@SergioDeMaster]

Заодно и ноги загорают

[@bersim3112]

Brillante idée! Merci!

[@FSGAMER35]

How much money in steel and what thickness?

[@BlueDroneBlues]

I didn't do this. I did buy steel 6'x6"x.25" and 7'x2"x.125" and that ran me after 4 cuts at the company 49 bucks. I'd like to get some tubing like this video and make a real table and not just a simple stand to do my little projects on. I don't know what the costs are in other places? I hope this helps a little.

[@R0yL33]

would have like to see how you take advantage of the slats for holding work, like the tables with dog-holes.

[@harleyheil]

Roy did you watch the video? He literally used them to make the frame for the table lol

[@R0yL33]

@@harleyheil oh the clamps. ok, fair enough.

[@xxstr8jacketxx]

Wow awesome job man.good to see other projects other then knives but I love your knives and the table :-)

[@ukaszordak9259]

Fantastic.

[@robertav3]

What size tubing's were you using and home much of it ? Going to the steel factory next week to purchase . Thx and nice table !

[@MRDINIZ10]

I also want to know.

[@Beyonder1881]

Im also interested to build welding table like this. Can you share the material list please?

[@georgelhogea]

.

[@igorrau8696]

На канал подписался, лайк однозначно 👍👍👍

[@sirmir616]

Подскажи, какой профиль использовал?

[@ruslankoval8959]

40*20 40*40

[@MrGougui]

@@ruslankoval8959 thanks, sizes are hard to make out on video

[@jempotchannel7310]

Nice video

[@SuperRobertheath]

Nice! That will come out n handy.

[@AVmake]

Thanks man!

[@MrF4eable]

Very nice simple table ! Well built.

[@AVmake]

Thank you!

[@blacksteel2434]

What about leveling

[@gabrielmarin4300]

Well done bro! You just got one more subscriber! Keep up the good work! :D

[@AVmake]

Thanks man!

[@piotrpietrzyk4790]

Naprawde Super szacun!!! Łapa leci w góre!!

[@rwat1106]

why close the ends of the tubes? just for S&G? that seems like a LOT of extra work, unless it has a real purpose.

[@carlosgarza1602]

Nice job!!! Could you please tell me the gauge # of the table top?

[@chloeellis4117]

Was looking at spending £700 pound on one. Not now... Lol thank you... Xxxxxxx

[@Sergio-Nav]

Can you post dimensions and material size??

[@ageinnnesss8016]

Elektdroda zagreb💪💪

[@ГадкийЯ-ж5к]

Молодец отличный стол

[@tristancousin7210]

Why not flipping the table top down when welding the top part to the feet ? It seems useless to weld the stick from lower part upward and having the melting steel drops falling when you can just do it in the opposite way and ensure the drop remains on the metal.

[@elainepagoto7578]

Boa noite qual a medida dos metalons que usou?

[@chrissample3047]

No wood on weld table fire good idea

[@tangsu7128]

And if that floor its not flat (in libra) u can trow that table.

[@jasonmpd2946]

Well done. 👍

[@Robocoppat]

Mounting a vise to (2) slots on a welding table is not a good idea. Just an FYI. It should mounted to a piece of plate 1/4" should be fine then bolt it/ weld it and that way it helps distribute the weight over the whole table. Again just FYI

[@camroon4404]

Roughly how much did all the material cost

[@andreskenny1184]

👏👏muy bueno

[@MaxKremenchug]

Всегда напрягает размещение сварочного инвертора под столом?! Разве он не будет сосать все что пилится на столе? Далее, нет держателя для держателя в процессе сварки)) Вот варю я нужно прерваться, куда девать держатель? У полочек должна быть хотя бы задняя стенка, а лучше вообще делать закрытыми ящики! Причина банальна - при металлообработке пыль и копоть неизбежна! Лучше когда твои вещи защищены от грязи! Нет розеток, нет освещения, нет струбцин и т.д. Столик сыроват...

[@tranhai599]

good

[@electrical-woodmetalworksh950]

i like it thanks

[@jasongerona11]

This is an inexpensive design i can make. Would you care to share the dimensions? Thanks a lot😊

[@Jpgundarun]

But what would happen if you made one and it was 2mm too long?

[@norgate880]

That is a sexy table!

[@baska1712]

Samo naprid, nisan ni zna da si iz hr, al kad san vidia da varis u kratke gace odma san se sub 🤣🤣 od sestre muz mi amerikanac i kad me vidia da iden varit tako obucen pobiga dvadeset metara od mene 😂😂

[@AVmake]

Ludi ameri haha😂😂

[@baska1712]

AVmake nema lipse nego kad ti rastopljena kuglica uleti u patiku pa malo zapleses po radioni hahah 🤪👌🏻

[@JCHCREACIONES]

Awesome!!

[@gabrielhernandez9502]

All good.. SHORT S AND WELDING NOT GOOD..

[@alexmkry]

pretty boy !

[@HARUULOST]

Cuáles son las medidas disculpa

Super!!

[@bqcreations8035]

Hi, "Bravo", very nice job, suddenly I subscribed, see you soon, Bruno from France

[@milutinmirovic]

👍👌❤

[@laundrysauce234]

Bro wear something that covers your skin, skin cancer isn’t a joke

[@АртемНовиков-н9н]

Сварщик в шортах и кросовках! Не доставал еще капельку из кросовок? Техника безопасности написана кровью.

[@КудайбергеновКудайбергенов-г2й]

👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍

[@eliasalhaweij9969]

The dimensions please?!

[@marceloferreira6699]

Madeira e solda não combina . Só uma opinião

[@jannik9540]

а плиты OSB здесь явно лишние, ...велика опасность пожара

[@ttihwbocaj]

Seems solid but the wood.. OSHA wouldn't approve

[@bertflisberg8908]

no welder welds in shorts and short sleeves !!! If u haven't been burned yet u will if u keep that up!