Welding Table Build

[@Kubaturka]

Great work! Congrats! I would like to make a table like this for myself. Greetings from Poland 😁

[@MarekKubi]

Thanks for your feedback and subscribing.

[@jmlvargas]

I like the use of space under the table. Thank you for sharing!

[@erikslagter3231]

Awesome project. Nuts and bolts have a coating on them, which make them difficult to weld on. If you prep them, your welds will be much nicer ;-)

[@MarekKubi]

Thanks. Still learning that stuff ;)

[@davidvrrampaul8663]

Great build. Ill be doing a table like this, thanks for the ideas. Loved the extension part for longer work stuff.

[@MarekKubi]

Thanks. Same here, collected different ideas and then made something for my taste ;) Now practicing welding, when I have free time.

[@TheRaulr151]

Great table. Great video on the making of it.

[@MarekKubi]

Yeah, took me some time to edit it :D Thanks for noticing that!

[@juancarlosrazoberber4831]

Jajaja me gusto el principio una sobada y luego 2 dedos adentro 😂 jajaja que buen proyecto amigo y que cada quien solde como pueda . Felicidades

[@brianmurray667]

Great job. A lot of useful ideas.

[@jasonhergert7573]

Great video :) gives me ideas for my future welding bench.

[@ArtisBMX]

Really well designed! I see your metal work improved significantly!

[@MarekKubi]

Thanks! How about video editing?

[@ArtisBMX]

@@MarekKubi yeah i did notice that you worked on that as well. Good fun to play around with transitions. I would use them every now and them but keep doing what you are doing!

[@MarekKubi]

@@ArtisBMX Thanks again for your detailed feedback. Spent at least half of my vacation on that project. A proper therapy for my soul.

[@ArtisBMX]

@@MarekKubi yeah man. I work on computer so DIY is a nice therapy for the soul 😇

[@Tony-de4io]

Buen trabajo no solo de producción, también de edición de video. Creo que fabricas una mesa excelente y el mejor sistema para soporte de tubos largos. Tengo una pregunta para ti. ¿Con que finalidad instalas un gato hidráulico?. Gracias por compartir tu tiempo y tus ideas Saludos cordiales desde España

[@MarekKubi]

Hey, thanks. I will use that hydraulic press on car works. Removing tyres, bearings and rubber.

[@MuscleDiamond14]

your work is clean bro

[@andrewford80]

This is awesome. I don't have the space for something like this but I really appreciate the video and was very entertained by the whole thing :)

[@MarekKubi]

Thanks. In winter will weld new garage doors and will invest alot of time in filming and editing that. Same story here with room. That table fits in wagon car and when we buy land and start building new house, then I will move it from my father house to our house. This welding table project was pure hobby stuff for me.

[@matthewparry9539]

Good on ya! Much better than the creative wooden pallet workbench.😜. No more welding on the ground😅 And you designed in some nice ideas. Good job!!👍👍😃..oh and great editing!

[@MarekKubi]

Thanks. Will weld garage door next. On the floor :D And will try flux core next time.

[@kropjesla01]

that is a very nice build!

[@FixitBuilditLoveit]

Nice design!! 👍

[@bersim3112]

Super beau travail. Superbe table à souder.

[@chrissample3047]

Nice. Table brother

[@ladwiss]

Very Nice Job ! That is a sweet looking table

[@degeneratewelderznation]

Nice work dude!! Awesome table.

[@whixamako1140]

Its a masterpiece welding table. Definitely i will build mine. Thanks budz

[@MarekKubi]

Thanks for commenting. It was one enjoyable project. Hopefully you will enjoy your work also.

[@claudiozampieri9043]

Bravissimo sei un genio, penso di farlo anch'io GRAZIE

[@_R_S_6]

Very nice job!

[@paulmorauda7749]

Nice welding table. I'll try to assemble like your welding table.

[@abimaellopez1809]

Excelente mesa de trabajo.

[@armandomunoz276]

Nice design. Some more practice on your welding can now be done.

[@MarekKubi]

Thanks. It turned out that in my new garage is newer electric cables and now it is way better to weld. Like actually so easy after that hustle with that. In that video there was difficulty to get constant electric flow. Never thought it was the case why it didnt work for me. Turned out the electrode welding is not that difficult when you have a good electric flow :D

[@stevetravels6160]

Very happy for you.

[@markyu70]

Great job!!! I like your video! I had learned stick welding when I was 14, 40 years ago. It was just a hobby, projects for myself, friends, relatives.....Trailers, doors, stairs, agricultural staffs and so. I haven't been welding for a long time (I have been working in IT for almost 30 years) . Now I am doing a few projects and I use MIG, TIG but stick welding is great and it was much interesting for me. Esab is the best electrode but please do put electrodes in plastic bag and close it tight, it is good practice because electrodes are hydroscopic and oxidize and after a while weld is not so good. I have to make welding table for myself, I have good workshop for hobby project and a lot of tools, but don't have welding table. Probably I will make use 10mm metal sheet whit 16mm holes. Keep doing good job, all the best!

[@MarekKubi]

Thanks. It is so nice to hear. I heard many IT background guys do welding as a hobby. Very cool. In the future I wish to do TIG welding. This is something intresting for me. MIG is good for productivity and business, but I have time. Plastic bag tip is good, will use that. Be careful with that 10mm thick sheet. It can bend while welding. I had some bendage, which I solved with weld on other side. I think you know about thermal expansion more than me. I suggest to use bolts to fix sheets in place. Have a good time in your garage and enjoy your work ;) For me that welding table project was pure joy.

[@markyu70]

@@MarekKubi You are great person! I watched your other videos. I think that I will screw top plate. I will use 8-10mm plates, and I think to buy cheap Kzubr 100A plasma so I will made bottom grid from same material. I made a few similar stuffs but luckily I still have one of these in my workshop and I use it rare. I will put bath with water on desk and connect plasma. kzbin.info/www/bejne/sJq7np6rbNVphZIsi=S1yKwZTeLjvDIJGz I think about something like this kzbin.info/www/bejne/h32Zo3WHYptjiJosi=QvJa4rD7jdxtoVYF

[@naj370]

nice table, I actually like the slotted top, the only problem is with your storage of your welding rod, the flux coating on the rods will absorb moisture, even in an enclosed shop, they are regularly stored in an airtight box or even a rod oven.

[@MarekKubi]

Yeah, I am rookie and not looking for estetic yet :D So can somehow deal with moist rods. Maybe will try TIG welding when I will have outside garage and gas balloon.

[@robbywilliansvartiz204]

EXCELENTE MUY PROFESIONAL Y IMAGINACION👍

[@akaytheking]

Kesinlikle çok güzel bir tasarım oldu. Ancak güzel bir boyaya ihtiyacı var, tebrikler bro

[@Andrejs_Dzelme]

Fantastic! 😊

[@MrEllhel]

Top gemacht 😊

[@youcefbouheraoua6160]

Hello from France, very nice job. Any drawings available to make one myself ?

[@BekirTuran-u9h]

Hello.. the table is perfect. I need a table similar to this. I am an amateur iron welder. Could you please write the dimensions of the table you made.. Greetings from Turkey

[@coutinho640]

Show de bola 🎉🎉🎉

[@agaron15]

Nice work! I'm just curious about the size and thickness of the metal you used for this table.

[@javihernandez6575]

Buen proyecto, pero por lo que he visto te falta bastante práctica con la soldadura, al menos con el electrodo, pero bueno, todo es cuestión de práctica, a por ello, a seguir fundiendo electrodos compañero 👍👍😉

[@chrissample3047]

Awesome

[@juliocalauad8149]

I wish i have the money and time for this 😊

[@MarekKubi]

Yes, if you have money, then you dont have time. If you have time, you dont have money. If you have money and time, you may be too old and health may not be as good anymore…

[@PittsburghWelder]

@@MarekKubi😂😂 that was funny dude Hey do you have the plans for this table?

[@buiItnotbought]

Funny how that works. When we are young we have all the time in the world but no money for parts. Then we get older and get jobs we have nice parts and tools but not enough time to work on it.

[@longmongcuu483]

I want to ask you the size of the iron plates on the table top, and the thickness

[@MarekKubi]

1x15cm

[@altinbuciza9377]

Duket shum e ulet. Duhet 90cm lartësia.

[@MarekKubi]

Welding bigger stuff is better on a lower table.

[@chrissample3047]

The press make a separate stand like table that just my opinion

[@ricardomontes373]

What's with the wood?

[@MarekKubi]

Can you be more specific? On what minute?

[@franciscojavierfloressilva4197]

Great work, congratulations. Can you plese share dimensions and materials to be use? I will love ro copy your project. ,👋👋👋👋👋

[@MarekKubi]

Thanks. It is 80cm x 140cm. around 70cm min height, so I can put some stuff on it and it is not too high. It is kinda individual. I just needed a smaller one, so I could fit it in my car and transport it.

[@PittsburghWelder]

Literally gave me the idea to use flat bar. I’m always trying to clamp shit down at work it’s stupid. There should be some kinda homemade fixture table in every worth a shit shop😂 thanks buddy. I’ll sub if you do 🤷🏻

[@chrissample3047]

No great table good idea

[@Lwimmermastermetalart]

Dude you really need a decent metal cutting saw and a TIG or a MIG Also you should always grind off zinc plating on nuts and bolts before you weld. Gases given off are very harmful. Just saying

[@MarekKubi]

Yes, thanks dude for your feedback. In place where I did that project, there was bad electrycity. In my new garage it is so much easier to stick weld. Never thought there is such difference in electric stuff. I now will try flux core for next step. Have poor ventilation, so yes I need to use some protective mask while doing stuff like that. That welding table project was pretty much my learning course and of course there are many parts, which is easy to perform better. I still enjoyed it and it is very interesting. In the future I am thinking of TIG welding. But first I need to build a house and bigger garage with proper ventilation. Atm I can do some smaller welding project with equipment I have. Estetically yes I am yet far away from something beautiful.

[@astralstudio]

Super!

[@thomasheinrich3623]

What sizes of metal did you use?

[@MarekKubi]

Table top from 15x1cm and cut to 80cm pieces. Frame mostly from 6cm square and 4mm thick.

[@sffan15]

Super Badass

[@tjs_welding_and_fabrication]

Nice job. A lot of time spent cutting your material from that plate for the feet and drilling by hand. Guess you have to use what tools you have. As you progress in your projects you will learn to gain the tools that make your projects more efficient. Good start.

[@MarekKubi]

Thanks. Yes, some tools I will buy, since now I have a small garage. But I want to be closer to viewers with my diy videos. And I dont make money with fabrication, so it is enjoyable to spend some more time with work. But I like new tools, so it is mater of time, when I will have a decent workroom :D At the moment thinking, should I go with MIG or TIG in the future. What do you think?

[@elsart0]

@@MarekKubi find a decent drill press and life will be easier.

[@stefanm5636]

Everything was good , but you need to practice welding.I am professional welder, bump those amps and keep the rod on thicker metal than move the puddle to thiner metal and keep an eye on arc gap, it shouldn't excite diameter of welding rod.

[@MarekKubi]

Yes, thanks for your notice. I now have some practice. Bought flux core machine and will try that on thin metal and to get more estetic look. For thick profiles, still will rock rods.

[@stefanm5636]

@@MarekKubi Stick welding is most versatile, but flux core is also good, only problem is spatter.

[@michaelbortolot8385]

Could you please share the dimensions? (Metal thickness used, table top dimensions)

[@MarekKubi]

Tabletop was 140x80cm. 15x1cm top material eith 3cm gaps. Total height was around 74cm-85cm. A bit lower than usual, so I can weld bigger stuff also without need of chair uder legs.

[@KikeLagos-z9e]

Hola me.podrias decir las medidas de.tu mesa largo y altura y ancho

[@MarekKubi]

140x80cm

[@KikeLagos-z9e]

@@MarekKubi thanks

[@papreplepen]

Marek skąd jesteś?

[@jarexxsuvexx8212]

I am taking a guess that the person making this video intent for showing this was to give people the idea of how to do it.

[@bernarddehon8040]

bonjour pourrait tu me donné les dimension des tubes et de la tables le plan merci

[@javihernandez6575]

Un gran trabajo, si señor, sólo falta que mejores un poco la soldadura, a mi humilde opinión, pero por lo demás, un gran trabajo, 😉😉👏👏👏👏

[@astralstudio]

Очень хорошо. )) А проект стола сам делал?😊

[@MarekKubi]

Daa, sam. Na bumage. Spasibo.

[@peteryeung111]

Should be clear coated or painted, it’ll rust up very quickly, especially outdoor. 🤷🏻‍♂️

[@MarekKubi]

Yes, just want to make some modifications before painting.

[@alhachlibou3lam94]

عمل جميل ورائع جدا

[@trx769]

Nice build but too slow on things that don't teach - like the feet and wheels and skips too many steps that would provide how to instruction for the actual build design.

[@MarekKubi]

Thanks for your feedback about video editing. I agree with you. Will try do do better on next ones ;)

[@doc_Browne]

...SHA-WEEET!!!

[@iscianelasso9957]

l'idée est exellente dommage pour ce qui est des soudures

[@jarexxsuvexx8212]

I am making a guess that the person intent on showing this video was to give folks on idea how to do it and could care less about Aesthetics or possibly doesn't understand the importance of it when putting stuff on social media.

[@MrRwp1]

Think unguessed wrong.

[@максбутин-з1ь]

кросс

[@nosebergs-are-at-it-again]

Some of the most hyped and worst metal working & welding I've ever seen lmao holy shit

[@MarekKubi]

Yes, agree. Today I can do better work. That is why the table was made for. Practice.

[@memyselfandeye1234]

nice table and ideas ... shame about the music ... thank fck for mute button. peace

[@MarekKubi]

Thanks for your feedback. The mute button is a nice solution ;) Hopefully you picked some ideas for your future project :)

[@memyselfandeye1234]

@@MarekKubi nice one for the reply chap ... alway keeping good ideas for later :) peace

[@PittsburghWelder]

@@memyselfandeye1234what do you mean tho?

[@Camila-wp2wq]

Solda horrível hein 😮

[@chacho2539]

как ты воруешь со своим видео,видно ты не умеешь сваривать

[@fyodorautistoesky990]

Nice well and a pretty well designed cut list. But I'd switch to 6010/6011 and run at least 20 amps hotter

[@MarekKubi]

Thanks for your tips. Will test different settings in my garage. Im very rookie at welding stuff.