Avoid this pitfall with your C5/C6 Corvette

[@dennisalstonZ06]

Don't forget the barbell in the back too.

[@browningbelgium2326]

Lyle, this is one of your best how to videos I've seen. Corvette owners for the most part, aren't rich with 3 vacation homes and a million-dollar bank account. Thanks!!

[@paulmoss7940]

Gun owners, for the most part, don't own a Belgium Browning. haha, I love em both too. If you have a good dog you would be three for three !

[@suematthiae219]

Lyle, being a Corvette enthusiast since I was in grade school being able to help work on my uncles 69 stingray your channel is probably one of the most informative , interesting, and down to earth channels on KZbin!! Keep up the good work! I wish your shop was in central WISCONSIN!!!

[@csvette]

@@suematthiae219 Thank you! :) Lyle

[@cunit1210]

I’d feel so much better about driving my C5 if you guys were in Virginia. 😂

[@keithp115]

Same here in Michigan, but Lyle's videos have saved me literally thousands of dollars

[@jamesbaysinger9780]

I don’t even have my c6 yet and you already convinced me to buy a rear main seal plate 😮

[@richarddobreny6664]

didn’t know about this but learning about my corvettes potential problems is why i watch this channel!

[@zone47]

I don't even own a C5 or C6 Corvette but think I'll sleep better tonight knowing this in case I ever do buy one! Great information and what a great price to avoid all that extra work if you aren't up to speed on this. Thanks for sharing and saving a lot of headaches.

[@petebutler5139]

Holy smokes! I ran across this video by accident but I’m glad I did. I took my C6 in for a diagnosis last week and the mechanic said it was my rear main seal. If I had the same leak after $3700 to replace the seal and it was the plate all along?? I would look for the nearest bridge and jump! Brother, I think you just made my day, my month and my year!!

[@paddlestandingup]

I don't even own a corvette (yet) but this is one my favorite channels on youtube.

[@menotyou5380]

Omg Please move to South Carolina!!!!! We NEED you around here!!!

[@robertspeakman8107]

Great video I have learned more from your videos on Newer Corvettes from you than anyone thanks

[@nikkoalpha2]

Another great video that helps save money and aggravation. Superb kit that is a necessity. Lyle is the best Corvette resource on YT.

[@keithlane4343]

Excellent explanation of a design flaw, with a cost effective solution. Thank you for sharing your experience. Take care

[@douglasjre]

I got a 200,000 mi 04 C5 that had a grinding clutch. It's not even worn out. It's been replaced before apparently because it has the upgraded rear main seal plate. Wish I could send you photos. Your channel is awesome man bravo

[@carlschifano9655]

Geez I wish I lived closer. Lyle you are the best.

[@johnathaniturbe1633]

Just ordered the rear main seal plate from your website. I’m in California. Wish you were so much closer!

[@davidwebster6804]

God bless you lyle David Webster

[@QUIKSIX1]

Just replacing a gasket only to find out that it was more than that would blow my gasket! Great info sir.

[@poejuleo]

Just got my kit from you, gonna throw it on when I get the clutch replaced here in the next couple weeks on my 2002 Z06.. Thanks Lyle!

[@devnull128]

I do not have a C5/6 at the moment but will probably order this knowing that I will again. Haha, great video!

[@davidncw4613]

your channel is a gold mine, TY!!

[@Chris-hq7nl]

Glad the Friday podcast is back!

[@smokinC5]

Lyle is the man! When i had to do my clutch he told me about this. I had never heard this before but he is soooo right.

[@mikektmrdr9005]

Great info Lyle! Just sold my 94 C4 and bought a 13 GS. Now I have to get a new memory bank of issues to watch for.

[@YellowVette04]

Awesome info. When I finally get back there I'll be ordering this for sure. Thanks!

[@240greyhawke]

That was a great, and very informative video. I am looking at purchasing a C-5 in the near future, and this will come in extremely handy. Thanks for putting out the content, and keep it coming.

[@samikhal5455]

I’m taking notes! I just purchased a 2008 C6 w/47K miles. I love it!!

[@robertdiehl]

I had a 2003 C5 Greenwood Le Manns Coupe. LOVED that car it had 175;000+ Miles and I just got tired of the oil LEAK! Dang wished I would have see this video!!!!

[@donaldvanhorne7538]

Great video, I ordered mine. Received it with scratches all over the mating surface from shipping I presume. I’m trying to smooth them out with 2000 grit and polish, hope it doesn’t leak. A single piece of cardboard between the gasket and flange in the shipping package could prevent this!

[@richardjensen8351]

Lyle, you are a national treasure. Thank you so much for being here for us Corvette owners. I always look forward to your videos. They are amazing!!!

[@todd8928]

Corvette fun! Go fast!

[@CrossWindsPat]

Man good to know Im sure I will be replacing the clutch eventually, this is really good to know!

[@waltermiller249]

Had no idea, when the time comes I'm totally down thanks again

[@sjcea0512]

Love these videos ! And Lyle has answered my question very quickly and professionally ! These guys are the best

[@GregSr]

My stock 2003 C5 automatic is starting to leak a lot from the back of the engine. It has just over 150,000 miles. While sitting at a light, the oil drips on the exhaust and that smell is pulled into the HVAC intake vent. Very annoying. Your video clearly explains what is probably going on with my C5.

[@HY-zj6rp]

Great to see you back. One of the best vids I’ve seen as a preventative measure. Thanks Lyle!

[@TheOldPCTech]

Great video, and $89 is a steal for all you're getting 😊. Will definitely remember this when it comes time to do any of that service to my C5... 😎

[@sbgalaxie]

Thanks for the good advice, Lyle. I did the harmonic balancer last weekend and replaced the front seal while there. Not as bad as I expected with a lift and a little help. Appreciate your channel.

[@captainsoftheazulcarrib7491]

Outstanding info! I was just under my 2007 z06 and saw wet on the front of the transmission so I’m getting it to shop for closer inspection. Of course Track Day is rapidly approaching! I’ll be mentioning your product to my guy, thanks!

[@robertdavis5714]

Thanks again for your impeccable information, and what a bargain $89.99, I will remember this.

[@Ghost-1980]

I’m order that after I repair my torque tube soon

[@christopherdutro168]

Thanks Allen! ( Welcome back)

[@robmunger922]

Another excellent video I had no Idea. Thank you for doing these I look forward to each and every video you post.

[@frankw7266]

Corvette.... the ultimate "while you're in there" car. 🤣

[@davidmartell9908]

Great video Thank you from Montreal Canada

[@ktriebol]

It appears that there is a way to tell the difference between the old and new rear main plates from the outside. If you look at the new plate, two of the mounting holes on the right side are milled out into a V pattern. Those same holes in the old plate just have circular counterbores. With this in mind, you can determine whether you have the old or new plate without removing it from the engine.

[@kfh1]

This info just helped me a lot, my 2013 has the updated plate already installed... Great catch!!! This comment should be pinned. 👍

[@Sandy-oy2lr]

I JUST had all the HVAC actuators replaced...along, as per your suggestion, with the heater & evaporator cores. When the clutch needs replacement, I will deff get that plate. And I just watched your other video on the C6 FP relay carbonization contact issue. The shop I'm using has had the car for 3 weeks now trying to make it fail. Last Friday, I saw and sent the advisor your video on it. Crossing fingers and toes on this one....

[@danlaur7973]

Great tip Lyle, keep up the good work

[@TheSurfRyder]

Always love the videos you do!! Especially LS engine stuff.

[@victorjohnson2093]

Thanks Lyle great info 😊

[@jefflawson7468]

Thank you for the great information always good videos

[@marcanthony6038]

Thanks for the tip Lyle.

[@skidco1]

Fantastic - knowledge is power (and a better financial outcome!).

[@peterlegari385]

Thank you, Lyle very informative. I probably wouldn’t have paid any attention to the main seal if you hadn’t mentioned it. Although mine doesn’t leak yet since I have the torque tube out I went ahead and replaced it anyway. Thanks.

[@lorigilbert3173]

Lyle I have a 1998 C5. A shop told me I have a fine line crack in my oil pan. But after seeing this, I'm not so sure 🤔 Thanks again Lyle for all the awesome content 👍

[@tonicamaro8683]

another great video

[@Termin8r27]

Perfect timing! I'm building an LS7 for my C5 Z06 and we had some problems with the rear main plate/seal on my built LS6. Thank you and ordered!

[@mcm95403]

GREAT info! I just bought the kit from you as well. Thanks for linking directly to it! I know at some point I'll have the TT rebuilt on my 06, so this will sit on the shelf till then.

[@haromaster6086]

As always a great bit of information. I will definitely make note of that!

[@rubikstube1]

Absolutely great content. Safe to assume same issue with 5th Gen Camaro SS LS3/6M? Is there any means of telling which units are more likely to have the problem (years, range of VINs), or just wait for a leak to crop up?

[@earlhelm515]

You are the best. Thank you for all your effort and trouble sharing your extensive knowledge base.

[@GregorioLonewolf]

Thanks for the great, informative video Lyle. The shop that I go to for L-O-F's etc kept telling me I had a very minute leak in the rear seal. Stupid me and my OG ways thinking that it had to do with the rear end and transaxle. I never could find that so-called minute dribble of a leak and the ground sure has heck never showed any leakage under the car. I have a 2000 C5 with the Z51 package 6 spd. after having a 1970, 73, 87 and 95 Corvettes. Since I bought the 70 in 1972 and being used to the old way of transmission setups being with bell housing at the rear of the engine and find that is not true of the C5 and newer Vettes. Doh (Homer Simpson style) and my knowledge is growing. Thanks for all the great videos and how they help the rest of us out.

[@c5grapeape]

Thanks for the info & all the tips & tricks you let us all know about. When I get into my new place I'll be ordering this for sure, just to have on hand when I need it. Take care.....

[@HeavenReservation]

Lyle, great info again!

[@patrick-davidh.2235]

Thanks Lyle! Great video…love the fact that I now have this knowledge about this! I have a C6…any other tips like this will be awesome.

[@cowboyf1699]

Great video. I wish I thought of this a couple of years ago when I pulled the transmission to replace the clutch. The seal was not leaking then… 😞

[@curtiswangrud8748]

Great information. Ironically, I have been chasing an oil leak in a GMC Yukon Denali in the oil pan area. Droped pan and replaced gasket...twice.....Changed oil filter three times (Leak appears to be in that area). Finally I thought that maybe the pan itself was warped/cracked? There was an odd bolt and may have cracked the top end as you mentioned, but just going to replace the whole pan with brand new GMC pan. Ill inspect for uneven areas as you mentioned prior to install. Thanks for the information Lyle.

[@rellmonger7935]

Kool makes sense. You already there

[@jamesparker6017]

Coral Gables 🌴🇺🇸 Gotcha. Money well spent 👍 🏄

[@wwm0611]

Another helpful video Lyle - information that can add to the knowledge base to keep these cars operating in good condition for years more

[@Man_of_TheWay]

Excellent tip and absolutely necessary. Also, always get the billet barbell for the oil control. I recommend Sac City's over MM.

[@jimorlando9397]

Thanks Lyle for sharing Your skills, I am most appreciative.

[@gregoryross4811]

Thanks for the video. Your videos helped In my budget buying process. In the middle of a transmission upgrade and just bought this kit to fix any future problems . Thanks

[@grownnotflown2]

Amazing as always! Lucky to have your knowledge thanks

[@joyroc885]

Good to know this. I may be in there soon due to clutch issues.

[@markcarr2420]

WOAH!!! Lyle, you are the BEST!!!! Thank you so much for all of your content. I'm buying my first Corvette in a few months. I'm using your channel to aid me in my purchase. Also, I live in Tampa so if anything goes wrong, I'll be a new customer.

[@csvette]

Sweet ! Let us know how we can help as you begin your Corvette journey! Lyle

[@enlightenedidiot9552]

Good info, and $89 is more than reasonable...

[@chipwhite7170]

Anytime I have what appears to be a rear main seal or rear cover gasket, I recommend the whole cover assembly that includes gasket, main seal and bolts. There is not much more parts price difference

[@Smooth05680]

🔥🔥🔥🔥

[@oisforoffroad]

I purchased the seat track repair kit for my C5 from you and that was great, so I think you just talked me into ordering this. I have a new clutch and trans on its way.

[@HarryMoore-ze9gk]

Great video.!

[@SteveAZ711]

Thanks for this great informative video! This is the reason I Subscribed to this Channel...GREAT REPAIR INFORMATION plus a little humor now and then. Thanks!

[@liamlapierre329]

Love all your content sir! But us up in Canada can't get some of these things! Or can we ? That device for the throttle / gas pedal was cool also, but that company only delivers to U.S.A. What to do?

[@lyleaulwurm9486]

I can sell it and ship it to you. Just send along your mailing address so That I can get shipping cost for you. Lyle

[@rubengonzalez3773]

Great info, will place an order soon

[@77cemoore]

Good video! I'll remember that when I finally buy a c6 z06!

[@jimharrow8104]

Far out & Great tip... thanks...

[@thereissomecoolstuff]

That's a great kit for a great price. Good on you...

[@morganhanson7480]

Video sold me. Just bought from ya!

[@Carl-un1rr]

I Will remember this. Thank you!

[@Toys4Life]

Good advice 4 sure! Don't just do the seal and have to do it twice!!

[@stormcrow5198]

I love your channel and content, having owned both C4, C6 and C7, but van you do a C2 buyer's guide. That's what I'm interested in now, especially with prices going through the roof. Although my interest is in a driver. Thanks and looking forward to your next show.

[@deanlock7791]

THANK YOU 👏👏👏👏👏I’m gonna order asap

[@ryanhansen3344]

Just bought one today July 4th 2024.

[@rushhartsock5137]

Man, what an excellent insight. Great video, great information! Thx!!

[@mrkulp1717]

I'll Contact You If I Develope This Problem.A Very Good Explanation.I Like Your Videos.

[@flatworm00]

This is some really good information! Thanks.

[@Bob-jn6ys]

Good information

[@Gunnye77]

Another very informative video!

[@kenhigginbotham4989]

Great suggestion for preventative maintenance. I assume your video is aimed at the standard transmission cars. Thank you for your videos.

[@pcha2301]

Hi Lyle I’m looking forward to buy one new plate kit from you very soon thanks

[@jackgardner9547]

Tanks for that information. my C5 develop a leak at the end of last year. We found when I did oil change. If it is the remain seal I'll be ordering your kit. And if it is the seal I will get the rebuild kit for the torque tube also seeing how its got to come out, its got 12500 miles on it .