Awesome Tier Tray Mould For Resin - Create Your Own Storage!

[@spectonkular7510]

If you do this again, when you do the initial ink maybe try getting some alcohol and dripping it over the ink, it will make the ink spread. I do love the sides of the second one!! 😊

[@looseskullsscrafts]

That's a great idea, I'll have to try that next time - thank you : )

[@nicholejoslin4324]

I was just coming here to say this! I've typically seen alcohol inks used in card making, and the artists often spray their alcohol inks with more alcohol to make them spread out. They also use plastic drinking straws to kind of help direct the flow of the ink after it's been sprayed with alcohol :)

[@spectonkular7510]

@@nicholejoslin4324 great minds think alike!!

[@spectonkular7510]

@@looseskullsscrafts anything to help sweetie!!

[@michellehancock608]

These are fabulous and yes prefer the flat lid to the mountain terrain lid! I haven’t tried dirty pour yet but you inspiring me to ❤

[@coralmarinesresinart]

First and third are my favorites ❤ they are gorgeous

[@looseskullsscrafts]

Thank you so much : )

[@ameliajane8686]

This is one of the best resin art videos I have watched. I do like the boxes and the fact that they stack. Now I also know what a dirty pour is. Thanks for uploading 👍🏻

[@looseskullsscrafts]

Thank you!

[@ErinCraftingChaos]

I've had this mold on my wishlist for a while. I originally found it on Amazon, so it is available there. Glad to see someone use it finally. I had the same idea of using another mold as a handle for the flat top. I have to say that flat top and the first tier you made with the leafing were my favorite. ❤

[@looseskullsscrafts]

Really?? I was surprised I hadn’t seen it on Amazon myself, I really had only seen it on Temu and I think that was only because Temu’s algorithm was pushing storage mould listings at me lol

[@lynnmorris8578]

Very pretty. You have to love anything and everything done in black and gold, add white and HEAVEN. Thanks for sharing. :)

[@looseskullsscrafts]

Agreed!

[@KitschyKittenStudio]

Ooh this is so nice! Now I’m off to get myself that mold!

[@looseskullsscrafts]

Have fun if you do get it!

[@caregiver55]

I loved this project so much that I immediately followed your link and purchased two sets (so I could pour two bottoms right off)! I can't wait to make a stack for a gift. Thanks for sharing !

[@looseskullsscrafts]

I hope you have fun with them!

[@Hotamma]

I agree with you. That last tier is my favourite as well. If you decide to put a handle on the lid, maybe just add to the centre and use resin instead of drilling. That way you don’t damage the lid

[@looseskullsscrafts]

I thought of using uv resin to glue it but I haven’t had the best luck with uv through/around objects as a glue. I want to try a different brand tho because I know a lot of ppl do use it.

[@KimberlyLetsGo]

The dirty pour does look lux. I started thinking of all the other color combos it would look really cool doing this.

[@looseskullsscrafts]

So many ideas 💡

[@Coyo-Tea]

That is just STUNNING ❤❤

[@looseskullsscrafts]

Thank you very much ✨

[@creativephoenix1411]

Such a nice project. It very interesting, how different the colors and the gold interacted. Like the last tier best. 🎉 Maggy Phoenix

[@looseskullsscrafts]

Thanks, Maggy : )

[@Jellybean_Craftz]

I love them 😍 all 🤷🏼‍♀️

[@looseskullsscrafts]

Thanks!

[@ginanichols8938]

Super cute❤❤❤❤!!

[@looseskullsscrafts]

Thank you!

[@donnaselinger8602]

I prefer number's 3, 2. I do like the lid of #1.

[@looseskullsscrafts]

Thanks - yeah it’s unique, I think it can be decorated really well.

[@corinachacon4987]

Love them!!!

[@looseskullsscrafts]

Thanks!

[@HoniPimblett]

They look amazing and yes the dirty pour is the best. I gave this mold and used tiger orange mix’s powder

[@looseskullsscrafts]

Thank you ✨

[@bluecurlygirl]

New subscriber here from across the channel in Ireland. Love these storage trays. I've just popped the mold into my temu basket. My daughter and myself are currently gone nuts with resincrete and a big 3kg bag of aqua cast en route at the moment. I'm hoping she'll start making and selling to help with her college expenses. We've made several trinket trays and coasters and loving it. It's a real learning curve but great fun.

[@looseskullsscrafts]

I hope she can do, resincrete looks beautiful. Good luck to your daughter ✨ I hope you both have fun with it!

[@looseskullsscrafts]

The other tray mould I mentioned in the video was this one here: kzbin.info/www/bejne/nnzHe3SEp9anqZYsi=4cjk8IPieuBTbFfR

[@carolynmozzone412]

I like the dirty pour 😀

[@looseskullsscrafts]

Thanks, I can’t wait to try it again : )

[@dandaresin]

I love all 3 of these and the way you did them. My fav defo the black white and gold. I seen this mold a few times pass me by on temu but never bought as knew would take alot of resin and I used to be tight with resin lol 😅

[@looseskullsscrafts]

Same! I’m usually very tight with resin but I have another large bottle and I thought ‘for the project!’

[@dandaresin]

@looseskullsscrafts haha lol that's fair enough ibe plenty of resin atm but such a large project I'd be gutted to run out more so doing daily videos.. lol 😆

[@rebeccamoerno8356]

I love it

[@looseskullsscrafts]

Thanks : )

[@ZippedUpKitz]

I have had that mould sitting in my cart's save for later on amazon for 2 months now… now that I’ve seen it actually made, I think I will go ahead and pull the trigger and get it,,,

[@looseskullsscrafts]

*whispers* do eeeeet

[@MarcysArtsyFartsyCreations]

I love that you used different techniques for each layer, though I am particularly drawn to the 1st and second layers! I've had that mold for months, always intending to make it, but then Octoberween (Halloween and Harvest) came, then Christmas... I was so tired at the end I just didn't have the energy to do much!

[@looseskullsscrafts]

I can’t believe I had never seen it before, seems to have been around a while lol I hope you get to try it sometime 👍

[@donnawilde9853]

i love your end results i may look for the mould to try making some with resincrete xx

[@looseskullsscrafts]

I bet this would look beautiful in resincrete

[@73kars]

Looks Great mould, I would put 1 handle thou not 2.

[@looseskullsscrafts]

Yeah it would look better with one 👍

[@Bonniehuggett2013]

Use glue for the handles on the flat lid

[@looseskullsscrafts]

I might do 👍

[@AllysonWonderlandOfResin]

So weird😮 I placed an order only hours ago for 2 different styles of stackable tier resin moulds! This has me so excited to get mine & start playing with zillions of techniques/ideas!🎉 Thought u were funny by saying “I may even make a stack as high as myself Cz I can”! That was my thought process when I ordered two designs but both of a rounded nature, wonder if I can stack n stack n mix n match n stack them more!

[@looseskullsscrafts]

Ooh have fun! I hope you can mix and match : )

[@melaniehenshaw8696]

That is a lot of resin. I don't think you could make it them to sell though. I also like tactical moulds

[@looseskullsscrafts]

It is a lot, yeah. Do you have a fav tactical mould?

[@barbaratimmerman919]

Can you heat the top up so you can bend it a bit to fit?

[@looseskullsscrafts]

I could try that, I think one of the entire side lengths is slightly out.