AXES MADE OUT OF SKATEBOARDS!

[@ModernBuilds]

So tight!! This video is fire

[@perchmerks977]

2 and I will you please

[@andypeterson2866]

Axes look amazing. Great video too. What I've noticed on many traditional axes is that the grain is parallel to the ax head. It gives it a bit more strength (think of a board on edge rather than flat) but so far it does seem that you have a problem with that. It is so hard giving constructive criticism through KZbin comments with out sounding douchey. Keep up the great work.

[@MitchSprague]

I tune in to your videos to see your cool projects but also to hear the awesome soundtrack you pick. All so good.

[@nr.17]

Epic. As someone who has restored 50+ old axe heads and put new handles on them, gotta say this is awesome and cooler than any I did. Next time if you do more, get some old axe heads on ebay, there are tons of lonely old axe heads just waiting for handles, and if Nicholas is sanding them up for you anyway might as well save you the step of removing handles on brand new ones.

[@BrentArmstrong]

Very cool! They look awesome!

[@MrRigmunkee1]

Outfreakin'standing! As usual, you have created practical art. A pleasure as always.

[@Owen741.]

Awesome work but you need to get a hold of Dale Puckett, send him some material and let him carve a cigar box guitar neck from it and build one. I'm pretty sure he lives near you anyways. I feel like the two would go together exceedingly well

[@sgsax]

These are completely badass! Thanks for sharing!

[@alexnelson8]

Very nice work Woby!

[@Sceme1991]

@ 6:00 YES! At last someone who knows the proper way to attach an axe head!

[@ylee1103]

Another great work!! 👍🏻👍🏻👍🏻

[@DumpsterMarcus]

they look sooooooooooo awesome dude!!!!!!!!!!!!!

[@ajpatten0472]

2:58 what kind of brand jointer is that

[@tyrelirwin]

Those sold out FAST! That's awesome!

[@dakotaenriquez8255]

Yet another great build and awesome vid!! Love your channel!! Never stop creating!!! 👍🏼

[@Tokolos]

Superb! Bass guitar body out of used decks next plz.

[@jasonrossi2096]

Question, now I don’t know much about woodwork, but you said you hate sanding. Would it be possible to use a sand blaster for the initial board sanding?

[@davebauerart]

They turned out great! I love your video style.

[@rcsv54]

Love this videos your shop is great

[@dgsyakilah8799]

great work 👏👏👏

[@shadowfall2011]

Genuinely curious to see a stress test of something like this. I'd imagine it to be fairly brittle, with a very short duty cycle, but it seemed robust at the end. I know that's not the point, but if we stumble into a new design/manufacturing process that is both form and function. Why not? Killer work as always friend

[@henneydesigns1693]

Awesome Project and Awesome Video... Keep up with ALL the Awesomeness!!

[@chris_UNLV_bug]

OMG, so excited...got one

[@felixdietzCGN]

do you have details on the etching work? A laser like the glowforge normally can't engrave metals, did he use a marking spray?

[@uknowulikethat4042]

when the bell sounds for the purge you'll be doing it in style. nice work with the handles

[@JolienBrebels]

Great video Ben, you are the master! I'm not that into axes, but the handles are really cool haha!

[@carlbielawski5034]

I like your attitude 👍

[@raymondboots6089]

So friggen awesome! Another great one! Keep on keeping on!

[@RawrFist]

Awesome work man, its always super exciting to see what you make!

[@ribasthiago]

that looks so siiiiiiick man congratulations

[@allanrosa6269]

How about making a bow riser? I follow your work here from Brazil and would be very happy to see you doing this project.

[@foxbaseballbats]

Another Killer Vid, Ben 👍🏻

[@jamesward1045]

Where do you come up with all of those old skateboards?

[@CornerfieldShop]

Really nicely done man! Also props for the camera operator. Really digging the shots (and edit) 😎👌 I still have a way to go to make my videos this nice 😅

[@thedistractedmaker]

Over the top Ben, amazing

[@commoncarve1770]

Great video!!!

[@PetesShopMakes]

where do you get all of your old decks?

[@heyimamaker]

Those are dead sexy handles, awesome work my friend!

[@MrNicktoonslover]

Damn son I thought the pencil holder was dope (the one I ordered looks great in my house by the way) now you do ax handles!! I might have to get one

[@llarmerfarmer5905]

What do you do with the grip tape after the project

[@WobyDesign]

Tossssss

[@diogoabreu4644]

sensational work❤️👏👏

[@JackmanWorks]

First!

[@kevinpottorff2899]

2nd!

[@WolfWould]

127th!

[@WobyDesign]

In my heart❤️

[@FlippinRejects]

Awesome video as always. Great looking axes. Keep it up.

[@nonyabusiness9747]

Hey so where do you get all of those used skateboard decks from?

[@nonyabusiness9747]

And how much for a custom axe handle.. I chop wood so that would be great!

[@LonghornWorkshop]

Cool as always man.

[@riceiain4801]

I’ve waited so impatiently for this video

[@DjNiX9011]

dope AF !

[@mikekollross8810]

Vintage axe heads would have made it more epic but an amazing job.

[@richardpatterson4312]

Where dry you get so many skateboards of the same type?

[@sonnybeltran7096]

Sickness!!! 😎💪🏽👍🏼🤘🏼

[@RCW-Designs]

Awesome handles. Now I really want a blank to try and turn into a bat.

[@hectoriousmaximus1130]

How does one acquire one of these axes?

[@whazee]

Also, would you consider making a good old British cricket bat out of skateboards??? 🤔 That would look so cool!

[@garagemonkeysan]

Great video. Very entertaining. Beautiful axe. Mahalo for sharing! : )

[@marlawhite3682]

very cool!!!!

[@calves93]

Bed frame would be dope

[@3rutu5]

nice job, ever considered making stools? especially using that shaping angle grinder attachment you could get that tractor seat look pretty good.

[@swissdadmakes3367]

Hi there woby excellent work and awesome editing! What about a few baseball pats for the next episode? Cheers from Switzerland

[@mikewazowski1217]

Awesome work! When will the skateboards be for sell? I want one badly 😭

[@whazee]

NICE I love it, I love it, I love it!!! 😍 Your vids always bring out a smile dude. 😊 And the axes are siiiiiiick....

[@chris_UNLV_bug]

yes, please upload more videos

[@CunninghamWoodWork]

Such an awesome upgrade to those axe heads. One complaint, you’re sold out! 😂😂

[@JC-xo3cn]

Finally. Been waiting for a new Video ;)

[@tommylein8000]

Great video, new subscriber here! I was wondering why you dont take off the grip tape as you get the skateboards rather than doing it as you go?

[@leadz170]

Soooo I’m going to need you to start uploading on a more recent basis because your videos are great! 😂But seriously you make great content I can’t wait till your next video!

[@VolcovLife]

Красава, а можно мне такой в Россию прислать ?) Крутой музон 🤟🤟🤟

[@KeyWoodworks]

stop making such awesome videos....ok that's not what I really want, make more. k thanks.

[@dimensionswoodworks]

Dude, do ever get tempted to just go buy a board of hickory and be done 🤷🏻‍♂️ Everything you do is such a HUGE time investment, that’s why no matter what you build.... we’ll watch!!!! 🤜🏻 Keep on that grind, and get donuts 🍩

[@kobalt7777]

Fajne! 💫 Sub i pozdrawiam z Polski 🇵🇱 👍🏻

[@halilibrahimaslan894]

Could you please upload your videos more often!

[@negotiableaffections]

Beautiful axes but the blade that scared me most? The utility knife at 1:17 - if you're pulling griptape etc under force...PUT THE KNIFE DOWN. We all do this and its the easiest way to get a very nasty gash injury. I'm no health and safety nut, but I don't want to see your craftsman's hands put out of action!

[@WobyDesign]

Ok, dad

[@Tehcarp]

Well that's not an axe grind but this would be a cool wall piece

[@Tehcarp]

First to say I don't know anything about throwing axes so this may in fact be the grind for targets

[@Tehcarp]

I'll be the first to say that I know nothing about throwing axes so this may in fact be the correct blade shape to set into targets.

[@FredMcIntyre]

😃👍🏻👊🏻

[@WouterZtube]

😮😮😮

[@gigasipke]

Dang, axes sold out. I guess need to be on the notification squad.

[@thenotionlab]

Second :) Notification squad. Great vid as always Woby

[@kevinpottorff2899]

I was 2nd (see above). Thanx

[@ZafroSoundz]

Yeah man, just call down to your local axe throwing club haha

[@bdaddyjames011976]

Should send one to Jason mamoa.

[@timkleinwachter8567]

Baseball bat please 😳😳😳

[@xyzcreate]

Aaaaaaaannnnnd there sold out!! I gotta wake up earlier next time!

[@regtennyson4797]

Make a wood workers mallet like your tough u in calif

[@marien20]

Throwing away brand new axe handles is a little... not so recycling... anyway: great videos!!!

[@74rustam]

ништяк бро

[@scoot.luca._8102]

Can you pls make fingerboards out of broken skateboards

[@trivalentlogic]

for the love of god. find some old axe heads, ask your viewers to send their old axe heads or colab with a Smith.

[@danielarroyo5357]

Hey man I’m a big fan of your videos can I have a few of the skateboards im trying to make some rings

[@dannycheng2600]

You should like make a gun stock just like Andy Rawls did... but like legally in LA...

[@chasecraiger1046]

super cool but your grain is going the wrong direction for an axe

[@andyjohnson3656]

why is there always sower patch kids

[@BxTekNurd]

Sour patch kids anyone? 👍

[@calves93]

I need a new bed frame

[@maxmerel]

Lol please tell me you used wedges

[@WobyDesign]

Please tell me you know how to watch videos

[@maxmerel]

@@WobyDesign Point taken, sorry about that. Next time I'll make sure to watch all the way through before making judgements. No hard feelings, I hope. Have a good day.

[@nicolanaccari5383]

A Tomahawk for Tony Hawk

[@TECsta76]

Optimist, for trying to make such a hardwearing tool out of reclaimed plywood and overly glued materials?

[@Yipper64]

Ack-shez

[@dannyiron7286]

Cricket bat

[@seansargent3316]

Those axes would not last on my property 😭

[@evilcanofdrpepper]

so you bought NEW AXES with perfectly good handles on them AND CHOPPED THEM OFF to make new ones. You know you could easily have just bought axe blades for cheaper and had less work to do...

[@the_the_real_paul]

You should make a baseball bat out of skateboards

[@rodney73991]

he got ax. if get enough broken skate bords he glue huge square logs and make log cabine home for him self. think make numb chucks, bow staff and three section staff martial arts weapons. bow staff hafe inch short then how ever tall you are. three section staffs normally 52 inches middle and sides 12 inches. little longer then bow staff when spin it folds up little. middle longer then ends. drill holes thread from through do some slip not not come lose when spin like bow staff. numb chucks easy make 12 inches as well need drill holes do some not that not come lose spin it. every one thinks have use chain but rope fine. chain use if going sword but most people use for exercise and fun. rope still hurt fine on anyone not use knife or sword so still weapon. to make own rope. need grow flax seed. when plant big weed. break steam long blond hair look stuff inside steam. want braid this like poney tail then get not tie book see how tie not not come undone. might find cub Scott girl brands hair to help with this. not sure what chain with dumb chucks should be think hand but two hands. I like big round 2 inch think staff and chucks staffs. but how round should be up people use it.