Axial SCX10-2 Trail Honcho $50 Budget Build - Week 16 - Finale

[@squirrelsguy]

I had that truck on my bench last night! It's had a few more upgrades but the same truck for sure. Beautiful Job!

[@drjavogel]

All 16 were great. Thanks!

[@bobbrown2811]

Awesome job. I enjoyed all 16 weeks

[@ShenRC]

😊👍cool! 3:54 this is why I always coat all metal parts with a thin coat of sticky grease it protects from rusting and also if the bearings are loose and slipping making that wear mark on a shaft the tacky grease will always make the burring spin before just spinning on the shaft. I also always coat all my bearings with corrosionX bearing oil with a drop or two on my fingers and coat the bearings this helps stop them from getting rusted .

[@stompindakka3222]

Awesome build guys!

[@marcusleader283]

I just got these transmission gears and they look great, but I was wondering what grease you used on the gears.

[@TonysRcTechboom]

Fantastic vid brother , liked and subbed you my friend , big thumbs up 👍👍👍👍

[@hemitj]

THANK YOU!!!!!

[@darksidejedi77]

Just binge watched the whole series it was great. And I don't even own one of these trucks. Yet. Great job guy's.

[@mz5872]

Can I change the gears without removing the transmission?

[@HarleyDesignsInc]

No, it has to be removed. It’s very simple.

[@rickbachman6574]

Watched them all,thanks for the memories. You guys have a blast at Axialfest.

[@RemedyTalon]

The Incision gears was my first Honcho upgrade. When installing the gears, the shaft pin had to be slightly tapped into the top gear to fully seat (finger pressure was not enough) which I like because there is zero play avoiding any wear of the pin and or gear. Super precision set of gears and I am very happy with them as with all my other Incision products I have installed. Driveshafts are next.

[@ChrisH-fs4uc]

I did the incision front axle shafts just as you did...now to get a tighter turning radius can I cut away the stock steering stops without causing damage?

[@robertmartin4135]

Great series! A lot of great ideas. For a relative noob like me, it has been very valuable!

[@JellisFPV]

great series! any chance you could put the files for the rear tail lights on your thingiverse page? i love to print myself a set!

[@HarleyDesignsInc]

Sorry, those aren’t a file I’m looking to share.

[@JellisFPV]

Fair enough, i might order a set then but there just a bit pricey with shipping to canada

[@Cameron_OKG]

Another great series . Can't wait until the next one

[@BSalc]

The new skid plate looks real nice. Its an a fun series! Thank you!

[@bonedigggss]

cheers!

[@nathanwebb1911]

Awesome build look forward to future builds

[@CarminesRCTipsandTricks]

6:38 The only benefit of replacing the plastic bushing in the Spur Gear is that the metal gear will better center the Spur..... HEY!! Wait a minute. That's a GOOD thing! 😎😀 I always use a metal 1150 Bearing with a Robinson Racing Spur Gear. Now the Trans Gears... I've been using the Incision set. Economical and STRONG! If even only the center and upper Gear. Can you answer a dumb question Josh? I forget basics occasionally. Will this Gear Set also fit the Wraith?? I'm pretty sure they're the same, but not 100%. *Thanks to you and Matt for a GREAT Series!!!* I never missed an Episode, and thoroughly enjoyed every one! Carmine 🚂

[@HarleyDesignsInc]

Yes, same gear set for the Wraith 👍🏻

[@CarminesRCTipsandTricks]

Thank you!

[@chrispiersol6564]

So when replacing the skid plate what do you do about the rear upper link? Cause the stock plate has screw tie ins. Am I to just put a nut onto the screws like the front upper?

[@HarleyDesignsInc]

Yes. I didn’t have to because I already moved my upper links up on the link sliders.

[@fistofzuk101]

Is there a link to purchase that skid plate?

[@STEVOD313]

Can’t wait to see these two builds running tonight👍👍👊👊📹📹

[@nuge74]

Great job on this series! Was a lot of fun to watch you two put your own touches on each rig. Thanks again!

[@kinslersrccustoms6945]

Week 16 I watch them all and commented a lot, I liked seeing how the same 2 trucks turned out so different and that was what made this Budget Build so much fun to watch and made your videos stand out! So for that I thank you and I hope that you 2 team up again for more.

[@vipxj1]

Thanks for the great budget build series, looking forward to the next buid off.

[@PhoenixRCCrawler]

Let us know how the skid plate works out.

[@adamhirerc78]

Didn't miss an episode 👍 👊

[@craigcodling481]

Great work buddy. Really enjoyed the series👍

[@WSquared60]

Really enjoyed this series...informational and entertaining! You wound up with a nice rig, even if it doesn't have mirrors ;) Looking forward to whatever comes next!

[@kcbunn9239]

Thanks for the series, Josh! Can’t wait to see what the next series brings!

[@BullgearRCvideos]

Good series brother, enjoyed watching, used some of the upgrades on my own rig.

[@IFCKEDAGOATWICE]

I’m the lucky one that got metal gears on my tranny!

[@andyrichey1192]

Awesome I enjoyed every bit of it, thank you for sharing, question Will that skid plate work on the first honcho

[@HarleyDesignsInc]

Yes it will

[@blizzardrc7024]

Awsome series!! Nice job on the truck. I watched them all and learned a lot. Can’t wait to see what u have next.👍👍

[@triplesped]

been a great series thanks learned a lot

[@coreykurtz1404]

Been here since the beginning, stellar job!

[@Tht.TallTech]

Such a great series with a great person! Hope to see future build offs....

[@Subeebles]

Great series, learned a ton of good info! Looking forward to your next project. See you guys at Axialfest!

[@Evan_Moore61]

Wow, no shock upgrade. That’s not a very Josh thing to do.

[@dragonflyjoyride]

Thank you josh for all the hard work and great info for this series. I hope to see you guys do another one. press on those shocks tonight. We all are looking to to drink, drink and drink,,,, and drink.... and drink. Have fun at Axialfest!

[@lacucaracha111111]

6:40 only makes a difference if the bushing is low quality or with a very loose slipper

[@rttbracetothebottom1456]

Great series. Learned a lot and fun to watch! Hope to see both rigs run at Axialfest

[@stshstsh07]

PSA: sintered metal is over kill for RC, prove me wrong

[@HarleyDesignsInc]

I’ve destroyed that top gear several times, sintered is definitely not as reliable.

[@RCExploits]

Great series, You both ended in the red. LOL.

[@00godlovesus]

This Guy is Cool:) M

[@mikeymike3240]

Awwwwww, it's over, so sad. Oh well, ROLL ON THE NEXT ONE. Can't wait for it. 😀👍👍👍

[@scottbray5936]

Great job Harley. Loved this series.

[@jeepxjeep]

me i got metal sweet yha

[@TheAweeone]

awesome !! i watched them all ;) maybe a $30 a week build of on a carisma coyote

[@odomandr]

If you did not sell this at axialfest I would be possibly be interested in buying it for someone to drive with me

[@HarleyDesignsInc]

I really ran out of time to look at selling it at AF. So I still have it.

[@odomandr]

auction it for a good cause

[@HarleyDesignsInc]

These builds take a lot of time and money so I sell them to be able to recoup some of that investment and be able to do future builds. KZbin isn’t making me rich 🙃

[@odomandr]

[e-mail] is my email. when you get ready I am obviously intrigued

[@fatherdaughterandsonfishing]

Awesome

[@kcbunn9239]

Thanks for the series, Josh! Can’t wait to see what the next series brings!