Builders beware, there are 5x11 bearings and 5x10 bearing in bag C, and they look very similar. Be very careful you separate them before you build, or you'll be tearing down the transmission to find where you used a 5x10 bearing in place of a 5x11. That sucks.
@benbuys22622 жыл бұрын
My advice Use dial calipers to figure out the diameter
@jdsrcs80614 жыл бұрын
Great intro to this new build!!! Now I want one!!!
@Charlieoil6 ай бұрын
I will be getting my kit in a couple of days. These are incredibly informative. Thank you.
@jerrodarndt40124 жыл бұрын
I live vicariously through you till I can pick one up for myself!
@1darnright194 жыл бұрын
Matt: “No one wants to see me drilling and screwing here” Insert Steve Carell joke here
@joesmith42223 жыл бұрын
Hey Matt, great insight on the future RTR version. I need to remove the two speed stopper in my RTR. Wish me luck.
@MrGibbie22104 жыл бұрын
Awesome Matt, fantastic close up, no messing video.... clean. Looking forward to the rest
@scalebuildersguild4 жыл бұрын
Glad you enjoyed it
@antipodeanadventures64094 жыл бұрын
If I didn't already have 2 builds on the table I would seriously look at getting one of these. Thanks for making it look easy Matt.
@shaunshaunk92974 жыл бұрын
Back showing my support!!!!! Me and my girl watched your 4.5 hour live stream last night and loved it !!!!!
@scalebuildersguild4 жыл бұрын
Awesome! Thank you!
@jonthomas84874 жыл бұрын
Everything looks super high quality in terms of plastics and gears.
@CarminesRCTipsandTricks4 жыл бұрын
I had to watch this AGAIN! 😉 I'm really hoping that Axial will sell those Portal Axles soon enough. THEN I want to try to piecemeal a UMG-10 together! 😉 Carmine ✈🚂🚙
@matthewrustia65704 жыл бұрын
PoorManRC won’t fit cause the scx10.3 has a different geometry
@CarminesRCTipsandTricks4 жыл бұрын
@@matthewrustia6570 Anything can be made to work with a little creativity! 😉 I've had to patch together Rigs for a few years now, I haven't been able to afford a new Rig in over 7 years...
@reddsshaker347711 ай бұрын
I just bought this kit. Can’t wait to dig in.
@scalebuildersguild11 ай бұрын
Enjoy!
@JDMJDK4 жыл бұрын
I’m always checking back or watching this series as I build my 10.3 thanks a ton Matt. 🤙🏼💯
@scalebuildersguild4 жыл бұрын
Glad to help!
@markcargill11854 жыл бұрын
I like to pack those open bearings on the spool with grease to keep maintenance down. Love the video though! Giving me a good start on when i get the kit!!
@CarminesRCTipsandTricks4 жыл бұрын
Thank you Matt!! I was looking forward to this! This is as close as I'll get to a SCX10 III... And I'm going to ENJOY this build!! 👍👍 Carmine ✈🚂🚙
@michaelhoyle32664 жыл бұрын
I try not to make innuendos, but it's hard, so hard.... Looking forward to the next episode!
@davidhazelden20544 жыл бұрын
That is lookin like a rearly grate kit build I mite take the blung n get my self 1 keep up the good work m8 👍👍👍👍
@BrandonMeyer16414 жыл бұрын
Axial Yeti II. I can only dream
@kravenkrawlhobby54384 жыл бұрын
Guess I’m gonna need that tool to put the shocks together come mid April. I will be watching all of these videos looking for tips. Thanks brother
@scalebuildersguild4 жыл бұрын
Right on
@bboydrummer14 жыл бұрын
Fantastic! I love building gearboxes, it is good to see so many gears and parts for this. I want to get the truck just to build the gearbox
@scalebuildersguild4 жыл бұрын
Go for it!
@olirc4 жыл бұрын
Got mine on pre-order, so will be watching with great interest, as it'll be my first kit. 👍
@scalebuildersguild4 жыл бұрын
Hope you enjoy it!
@94auwing4 жыл бұрын
my wife doesn't like your channel because it takes away from her allowance.
@早川はるこ6 ай бұрын
hahaha😂
@TerraQuestRC4 жыл бұрын
ditto about the Capra shock, actually pretty happy with them and only swapping out for cool factor of piggybacks.
@gheorgheoltean44674 жыл бұрын
I really like the new AR45 axle, an transmission too! Nice video like always! Thanks for sharing!!!
@scalebuildersguild4 жыл бұрын
Thanks for watching!
@Cronicncars4 жыл бұрын
Ok I see how it is setup after finding the right video. Maybe in the future we will see it setup with 2wd 4wd instead of dig.
@TheWright14 жыл бұрын
Awesome video! These build series are the best good info. I would love to get this but just picked a SMT10 and the wife won’t let me get another truck for awhile. In the mean time I will just drool 🤤 all over my phone while watching these videos.
@scalebuildersguild4 жыл бұрын
Glad you like them!
@jeanpmagnanig4 жыл бұрын
Can't wait to build that thing! Amazing video and voice over! GJ !
@scalebuildersguild4 жыл бұрын
Thanks!
@davidz.29844 жыл бұрын
Thanks for the build video. Can't wait to see the rest of the series. :)
@boldrbangr98344 жыл бұрын
Great job! Can't wait to get my hands on this kit.
@maximillusthecamealious.67804 жыл бұрын
Can you install the dig feature to lock the front wheels instead of the rear to do burnouts super important question for me atleast would love your input or ideas. I know it defeats the purpose what it was intended for but i am a man of specific tase and when i saw that feature it almost immediately sold me.
@ragsixracing4 жыл бұрын
Line lock? Cool idea. If you can lock the front, then have the front go to neutral instead of 4wd, this could make a pretty sweet muscle car 8)
@scalebuildersguild4 жыл бұрын
No, dig is only designed for the rear.
@Reyviniegra4 жыл бұрын
I see Capo like motor/trans mount there Awesome...✊🏿!
@old-rcplane-phart4 жыл бұрын
How are the scx10.3 institutions? With the capra, they had instructions' issues. Thanks!!!
@scalebuildersguild4 жыл бұрын
The senior product developer and I went over them a number of times, they should be good!
@glm480v3 жыл бұрын
So hey, just finished my build, love it, everything is great, but as you advised, I put the firmer shocks up front, the green ones, well the instructions call for the green ones in the rear. My backend is squishy as all heck, what gives?
@scalebuildersguild3 жыл бұрын
You’re welcome to try it the other way, or get another set of the firm ones!
@benjellesed7716 Жыл бұрын
Just got a kit for $180, just missing the gears and shafts for the axles. Excited to start my first builders kit and glad to see such a detailed video of the assembly! Do you have recommendations for where to get the gears and such for the axles?
@derka55814 жыл бұрын
After losing a c clip, I put the others together inside one of the parts bag. So when it go's flying off ...it's in that bag,not the other side of the room. Maybe this will help someone
@ericbrooks15624 жыл бұрын
More, please 👍
@scalebuildersguild4 жыл бұрын
Wednesday!
@boared213 жыл бұрын
I dont care for the dig setup however , id love to be able to choose from 4wd to 2wd , but it seems in order to do that you'd have to unfortunatly do a completly different trans .
@chriscoles39014 жыл бұрын
With my hands it felt slightly catching but watching and listening to other people's scx10iii sounds really Geary! So I thought this was normal until going from reversing to farward the rear axel locked it wasn't the dig as that was turned off. Finally found videos of "axels clicking" and found shimming and it's so much quieter now and smoother. New problems! Have gone through 3 different micro servos and smashed the first plastic gears. Second and thirdly was spectrums own. 9g is to week for dig maybe a full size servo could be squeezed in??
@scalebuildersguild4 жыл бұрын
Sounds like your end points could use some finessing!
@chriscoles39014 жыл бұрын
@@scalebuildersguild time for a new transmitter me thinks! Absima cr6s was good for a cheep starter radio. But adjusting end points on that was a pig!
@knutroald53324 жыл бұрын
You said two for the rear🥴Giggedy! Nah nah, good stuff...good stuff👌🏼😀
@bebel31633 жыл бұрын
hello could you please inform me I have a scx10 III in rtr on which I would like to add the 2nd gear I add the moni servo what should i do with the gearbox as a modification thank you in advance good driving
@beleg14374 жыл бұрын
Question about rc shocks. Why do we adjust shock damping by changing out the oil instead of changing the valving like in 1:1?
@scalebuildersguild4 жыл бұрын
You can do both, depending on the shock setup. Assuming other pistons with different hole patterns are available.
@dschenk9524 жыл бұрын
Thanks for the video. Did you happen to see which way that E clip flew off to?
@scalebuildersguild4 жыл бұрын
Unfortunately no
@donaldellis81164 жыл бұрын
Drilling and screwing LOL!
@matthewrustia48744 жыл бұрын
Can I put the same overdrive ring and pinion from a scx10II?
@yetimonster25864 жыл бұрын
Great info - thanks
@scalebuildersguild4 жыл бұрын
No problem!
@sprather844 жыл бұрын
Hey whats up my rc brother 👍🏻 can i please get a link to the tools you used to do your shocks and links?
@royomtb4 жыл бұрын
Is possíble to have an intermediate position of the dig unit that alows the rear wheels to spin freely?
@scalebuildersguild4 жыл бұрын
It is, but you'll need fine adjustment to make it work.
@markclausson5644 жыл бұрын
I hate the red plastic differential cover.The 1st thing I would do is paint that thing black at least. It makes it look like a cheap toy. I don't know why they would do that.
@user-vi4zp6ly6j4 жыл бұрын
What's the finish weight on the transmission minus the motor even though it doesn't matter which brushless motor it's all pretty close in weight. if you had to guess with the motor mounted, I can only imagine which company drops that transmission plus dig kit in metal ouch. Enjoyed watching the build trying not to watch to much just trying to think if the transmission with dig and portal's will allow me to drop the low down weight that I need to prevent that funky float i have at times. I would prefer to hold that weight in battery and center of the lows in the chassis.
@chriscoles39014 жыл бұрын
Hi matt have just this second finished my first build and being a scx 10 iii had a few problems. My axels are hanging up I think I have found problem is the pinion in the axels moves in and out slightly and when in its to tight of a mesh and binds please sir any ideas would be appreciated. Also love the build you sir have just acquired a new subscriber!
@scalebuildersguild4 жыл бұрын
I didn't need to shim mine, they usually don't require it. Are you trying to spin the axles under power or just move them with your hands?
@jameswagner50984 жыл бұрын
Great Video! How are you liking the Dewalt Screwdriver? I just ordered one which should be here this Tuesday. Looks like it works great for my intended purpose.
@scalebuildersguild4 жыл бұрын
It’s fantastic!
@richletourneau46284 жыл бұрын
Sorry if I'm beating a dead horse, but what kv motor did you go with? I have a Slate 2850 in my 10.2, was thinking lower in my 10.3 to take advantage of the 2 speed?
@scalebuildersguild4 жыл бұрын
I’m running 2850 in this.
@isaiahfurrow74144 жыл бұрын
Would the 1.7 transfer case be slower, or faster? Would it be unusable with the portals?
@scalebuildersguild4 жыл бұрын
It’s taking the reduction that is in the portal and putting it in the t-case. I wouldn’t do it without a straight axle.
@darkrein114 жыл бұрын
So will this portal axle axial need a reverse rotation motor like the trx4? Will this also accept a 550 motor?
@scalebuildersguild4 жыл бұрын
Regular motor, yes a 550 will fit with some mild possible trimming.
@sprather844 жыл бұрын
Man that transmission kinda intimidates me this will be my first build
ok got a few questions, i have a 70mm castle motor will that fit, and the lhs here said that my 19t 48 pitch gear will work, am i going to break things trying to run this,
@scalebuildersguild4 жыл бұрын
48p will NOT work. The drivetrain is 32p
@jasonsmithsrrcfun92594 жыл бұрын
What brushed motor a 450 how many t do u recamend
@jasonsmithsrrcfun92594 жыл бұрын
I have a brushless 540 1800kv will that be enough
@jasonsmithsrrcfun92594 жыл бұрын
I cant get an answere I want to no if 1800kv will or will not be enough
@koslan26464 жыл бұрын
how big in size can the micro servos be? specially the one for the 2 speed?
@kevinhill29292 жыл бұрын
Hey Matt. I don’t have a 3d printer but could u send a link to me for the knight customs fenders. Thanks
@scalebuildersguild2 жыл бұрын
There's no fenders in this video, so can you be more specific? Thanks!
@NBproductionspresent4 жыл бұрын
i should've watched this
@scalebuildersguild4 жыл бұрын
Hahaha
@RC-jr3th2 жыл бұрын
Could have informed the people about the (speed lock) and (4WD)that screw is/ was a struggle to tighten up
@scalebuildersguild2 жыл бұрын
Speed lock?
@timivory53644 жыл бұрын
Great video. My kit is arriving today and I can’t wait to start it. These videos are going to be very helpful. Where can I find the green slime and tools you used to assemble the shocks. Thanks
@scalebuildersguild4 жыл бұрын
Both are from Team Associated.
@rickschoephoerster11494 жыл бұрын
Still on the fence about this truck. Have 3 TRX4s, but this truck sure looks good. I have learned to install those pesky clips in plastic bags to contain any escape attempts. How do I get scale SBG decals for my trucks? Thanks
@scalebuildersguild4 жыл бұрын
As soon as I have new ones in stock, I'll put it out there so people know.
@trailcrawler20384 жыл бұрын
Nice!
@scalebuildersguild4 жыл бұрын
Thanks!
@stonedog034 жыл бұрын
What bits are you using in your screwdriver?
@scalebuildersguild4 жыл бұрын
Reef's RC.
@OswaldBeef4 жыл бұрын
Wow those portal housings look thin....idk if that matters just wow
@scalebuildersguild4 жыл бұрын
Thin? Where?
@OswaldBeef4 жыл бұрын
@@scalebuildersguild just the wall thickness of the inner and outer housing seems thin. No idea if that would matter it just looked thin is all.
@johnunderhill66724 жыл бұрын
Hey Matt, are you going to do an electronics set up Vid?😉😘😉 Thanx!
@scalebuildersguild4 жыл бұрын
If it's part of the instructions, I cover it in this series.
Hey Matt, great video!!! quick question, with the v8 motor cover, will there be room for a 550 size motor??
@scalebuildersguild4 жыл бұрын
Yes, some trimming might be required.
@jasonsmithsrrcfun92594 жыл бұрын
Will a 1800kv work for power
@scalebuildersguild4 жыл бұрын
It should. It’s a little low but should be fine.
@beefblank76264 жыл бұрын
does it come with a pinion or do you have to get one separately
@scalebuildersguild4 жыл бұрын
Comes with.
@johnunderhill66724 жыл бұрын
At 16:23 he mentions which pinion is used, 14 tooth included!
@TVsGringoStarr4 жыл бұрын
The Capra didn't have a spring on the slipper clutch either.
@wackyrc13944 жыл бұрын
Enjoyed, thanks! Scale nationals rescheduled?
@scalebuildersguild4 жыл бұрын
I believe so, for November.
@stevetonner Жыл бұрын
Dude I'm having trouble with my front axle assembly and that's the only part of the video you fast forward through? My luck is the worst
@scalebuildersguild Жыл бұрын
What exactly is the problem? Perhaps I can help.
@stevetonner Жыл бұрын
@@scalebuildersguild Actually, I figured it out. The two halves of the axle weren't going far enough into the differential gear, which was preventing me from getting the caps on the portals closed properly. But I figured out the issue and it's together now. I apologize for having bothered you with my comment!
@user-tb1sp5se8b4 жыл бұрын
👍👍👍
@gmummy4 жыл бұрын
Green slime link?
@mickd81884 жыл бұрын
I don't have a link but I know it's a Team Associated Factory Team product.. Cheers 👍
12:24 - they should sell a RTR that has everything unlocked! It would be cool to get one of these trucks but this kit is way out of my skill level
@OswaldBeef4 жыл бұрын
It won’t be locked out ...he’s just guessing
@TheGalantir Жыл бұрын
Yeah in contrary to what is said here every single hole is too small. Without a electric tools this does not go together at all because every single hole is too small. Just get an RTR version, saves you a lot of headaches.
@scalebuildersguild Жыл бұрын
Hand tools will always require more torque. Building a kit is a fun and rewarding experience, and I'll always recommend that first.
@TheGalantir Жыл бұрын
@@scalebuildersguild Ow if it was only the torque, i would be so happy. No literally every single hole is too small and has no thread. To get to the torque you need to get the screws in first which is jst simply impossible with power tools. It is honestly one of the WORST kits i have everexperienced.
@PhiddyPford4 жыл бұрын
Blown away that Axial supplies and uses grease!
@TVsGringoStarr4 жыл бұрын
I'm sure the RTR will will be bone dry just like all of their others.
@marcosdo9954 жыл бұрын
Guys don't forget to lube all your bearings with red locktite !!!, thanks me later 👍👍