Axial UMG10 Builders kit

[@rcsnapon2132]

Awesome video

[@krlaturn]

Rcsnapon thank you for watching and commenting friend

[@rcsnapon2132]

Bulletproof RC anytime brotha

[@doomracing5527]

Nice build!

[@rcscalecrawler38]

Bonjour, très beau umg, belle roues, ou avez-vous trouvez les roues ? merci

[@krlaturn]

lolo Patrick sorry I only speak English my friend

[@jamesrockford5737]

Alientac Wheels how hard are they to put together do you have to take out all those little screw every time you what to remount new tires is there a video out there put a set together IM new to Beadlock what wheels Are easy to put together brands thanks jim

[@krlaturn]

james Rockford there are five screws in the rear that hold the halves together. They are easy. But you must install all the screws the first time to assemble

[@Pedro123-s6v]

Very nice truck .. congratulations. Where can you get that front grille? regards

[@krlaturn]

pedro da costa thx for the comment friend. The grill is from Shapeways. Here is a link. www.shapeways.com/product/PQNCAEPJP/umg1001-grill-standard-issue

[@danytremblay6168]

Hello, love the color of your umg10, I bought the same wheels, but in black, on ebay and love them. I was wondering if I should put that mutch weight on this truck. I have a trx4 and put a lot of weight and there is sommes places my friends can go that I cant because of the over weight of the trx4 and maybe the missing weight of the umg

[@krlaturn]

Dany Tremblay thx man! Yeah it’s a trade off. Weight down low will lower center of gravity and stabilize the rig. But it can also cause the rig to lose traction on a steep incline because of the added weight. It’s all about preference. I suggest you try the rig without the weight first and determine if you need it. I run mine with brass knuckles and brass on the rear lockouts and my buddy runs his stock. I’ve noticed he rolls over and I don’t. but he can climb up vertical hills with less effort than mine.

[@danytremblay6168]

@@krlaturn Thanks for your reply, I tried it stock but it was not really a performer and now added the brass knucles and a 8mm alu hex on each wheel, will add the metal wheels this week end and a brass diff cover later just to see how it goes. I will add a servo winch when I receive the servo and Steering Gear Servo Winch Wheel. I really like the work you have put in your truck :)

[@sarantisharitopoulos8252]

Hey, I have a question. I’m attempting to install the same wheels on my UMG as well, but it seems that the axles are a little too long to put the caps on, and the hexes are too narrow to tighten the wheel down. Did you guys have these issues?

[@krlaturn]

sarantis haritopoulos yes, I used these 9mm offset 12mm hexes. Link below rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F303232759617

[@sarantisharitopoulos8252]

Bulletproof RC thank you so much👍🏼

[@johnbasterson7938]

Everybody buys the shapeways grill. At this point it's more unique to have the original!

[@krlaturn]

john basterson it’s all about preference. I personally do not like the stock grill. It looks too modern for the body. The Shapeways grill just looks more era correct

[@morercthanclassy1543]

What width hexs did you use on the axles to be able to use wheels?

[@krlaturn]

I believe it was these www.ebay.com/itm/Samix-SCX10-II-Brass-12mm-Hex-Adapter-4-6mm-Offset-SAMSCX2-4063-6-/401678091820?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0

[@morercthanclassy1543]

@@krlaturn thanks mate, great truck there

[@jasonsmithsrrcfun9259]

So can you put almost any motor on the mamba x

[@krlaturn]

Jason Smith sr every esc has its limitations, but the 1/10 mamba x is basically a 1/8 esc. Basically you can pair any motor but you must check the manual first. The bigger the battery the lower the kv needs to be

[@CodytheFordGuy]

What pivot balls did you use?

[@krlaturn]

I replaced all rod ends with Boom Racing Bad Ass rod ends. Here’s a link: dixielandrc.ecwid.com/Boom-Racing-Badass-Rod-End-Set-for-the-Axial-SCX10-2-Kit-or-RTR-p114373382

[@jasonsmithsrrcfun9259]

What size motor do you have in it

[@krlaturn]

Jason Smith sr my motor is 36mmx65mm. 2500kv

[@briangardner665]

Nice build, looks awesome.

[@juarezlandscaping886]

What rims are those again? Who makes them?

[@krlaturn]

Juarez Landscaping here is a link: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192789950084

[@johnnydavis8489]

Of all your crawlers which would you say you like best ? I just received the umg10 kit to build. Wondering if I should get the Cherokee kit also to experience the longer wheelbase. Or try another kit like the element enduro or Rc4wd 4 door kit trail finder 2 long wheelbase. Thank you for your videos

[@svenmgroth]

Hi would U mind posting a link to those front inner fenders? Regards Sven

[@krlaturn]

Sven M. Groth here are the ones I used. They required slight modification at the front near the bumper and at the rear where they meet the sliders. But they are pretty easy to cut with s dremel

[@svenmgroth]

@@krlaturn i'm sorry but i cant find the Link ? It's no Problem to Dremel a lil Here and there.

[@krlaturn]

Sven M. Groth rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202745620618

[@newtonfoster7581]

KYX makes awesome parts!!! I installed capital KYX axle housings on my TRX4 BRONCO and man they were the perfect weight I was expecting. I used YR brass front bumper, HR brass portal covers, and their shock tower mounts. YR sshock towers, TREAL servo mount, motor mount cover, Mamba X with 1406 Castle 4600kv and it was a blast on just 2S, crawled great in low and would haul ass when I wanted it to

[@tiborvon]

Thats an awsomme looking truck bro

[@ozboy8144]

Very nice looking build Like that Trail finder 2 that one is on my bucket list 1 day would love to have one😀

[@joanper]

Hi. Very good video but for problems with the language I can not know where you can get that front grill with round headlights. Can you tell me where you get is grill? Thank you

[@krlaturn]

joanper Here is a link: www.shapeways.com/product/PQNCAEPJP/umg1001-grill-standard-issue

[@RevolutionX]

Nice work on the UMG!

[@voodoostroker]

I never got one of these but you did a great job on it Keith it looks badass.

[@lstruggy]

Very nice! 👌🏽 Was this originally a builders kit and u just added the body & hop ups? Planning on copping the BK as well soon!

[@krlaturn]

PMC05 it’s the UMG10 builders kit. It came with the body. Attached is my first video showing the upgrades.

[@ReadySetRC]

Amazing build Keith! Love all the goodies and upgrades on this rig. Is the body mounted with magnets? I thought I saw that on there, nice touch.

[@krlaturn]

Ready Set RC Hey Neal hope all is well. Actually the body has the factory rear hinge and front body pins that latch under the front bumper. Thx 4 watching brother

[@scottbray5936]

Dude what a nice build. Let’s go crawling great video bro as always.

[@DeucesWildRC]

Nice rig Keith 👍

[@JoseDepacos]

Love those wheels, can't find them on the site. :(

[@krlaturn]

Jose Depacos here is a link: www.alientac.com/search?q=1.9+military+&type=product

[@JoseDepacos]

@@krlaturn Found them on eBay from Alientac today even cheaper than the site with free shipping. Ordered. UMG 10 kit was already on the way as well. So glad I seen your truck with those wheels. I'm sure I'll be purchasing others from them. Thanks!

[@krlaturn]

Jose Depacos you will need these as well because the axle shaft is too long to install the center cap. this also makes the stance wider and it works great!

[@JoseDepacos]

@@krlaturn Need what as well? You have wider offset hex adapters on it?

[@krlaturn]

Jose Depacos my bad the link did not work. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192723238255

[@KickinCards]

Should out links to everything you added

[@Martyv231]

Hey nice rig, I love my mogg. I tried looking for those wheels on eBay through aleintac and can't find them. I found a bunch of others they make but not those. Could you please put a link up? Thanks

[@krlaturn]

martin vidrio Here is a link to the ebay listing. Looks like they are temporarily out of stock but you can message Alientac to see when more will be available. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192789950084

[@krlaturn]

martin vidrio Here is a link to them in black www.alientac.com/products/alientac-four-1-9-alloy-beadlock-wheel-rim-wide-1-for-rc-military-truck-120?variant=18511578660931

[@henryurbina2555]

Nice rig man! Love all the upgrades you did. Works for good inspiration. I just got a kit that I will be building soon.