Axis Off Road/Coleman CT200 Mini Bike MODS AND UPGRADES!!!

[@brodyproductions6392]

This worked very well! I was surprised to see it would make a difference. My speed went from about 18 MPH to 37 MPH. Big difference!

[@jaysoberanes125]

Great video. Good to see Dad and Daughter working together on projects. Best moments of my life....Spending time with my girls.

[@shaneintegra]

Great video. Messing around with these bikes are awesome fun! It gets better once you rebuild the entire engine!

[@danasymosky5609]

Great video! You're lucky you and your dad can share this hobby and spend time together. Enjoy it! In PA we call them zip ties or wire ties. I work in an auto parts store. The manufacturer of the ones we have here calls them cable ties🤷‍♀️

[@Rayray17772]

Great Dad/Daughter project! Well done!

[@speedyone5924]

I bought this bike and I love it,..I use it for a pit bike and yes,it's a good running bike,.I saw your first video when you first purchased it,..I've been looking for mods and thank you for the update,..this bike is cool and it rides great,I'm 6 ft and 200 lbs,.just need a bit more speed,..you're mods look great,..keep us posted on that exhaust and torque converter,..thank you,..

[@sybsygstgstsgysg5330]

Is it reliable

[@Gothguitarist]

A sprocket upgrade is where you got most the speed the exhaust doesn't matter on a four stroke as much as a two stroke the new carb also helped

[@jasongilliland9508]

You and your dad did the exact same modifications that i did to my rb200. Nice work.

[@mikesbarn1858]

I have a CT 200 U EX. Did many of same mods and then some. Does 60 mph. You will benefit from making a springer seat. Make sure to tie down the governor if you don’t remove it.

[@johntannerpoulson]

Mike, I just got a ct200 u ex what all did you do to get 60mph?

[@steveblottenberger1097]

You got my vote nice to see young ladies getting involved in Motorsports keep up the good work

[@DJProphet124]

Awesome mod live it its amazing 🤩🤩🤩

[@ChrisCashon]

Interesting…such an easy governor to hack. Also, Tie Wraps!

[@pacanis]

Certainly one of the better/clearer videos on showing the mods and not unnecessary chatter. Except I have a hard time believing that piece of frame you cut off doesn't add some sort of side to side stabilization.

[@ericmartin3396]

One thing I figured out if you take the spring on the throttle cable and cut /(3/16) a little off of it you can get the carb to open up more. Since the spring does restrict it once you move the governor screw out. Then you need to stretch the spring out.

[@Defender513]

Keep up the good work ! I can’t wait to get a mini

[@willbergevin4218]

I was hoping for some more! We need more content! Lol

[@buddahmayne9273]

Done this to my mini bike. Nice revs

[@davidbretall8118]

Zip ties!! Upper Peninsula of Michigan!!!

[@donaldjones5701]

Zip tie and tywrap are both name brands that we all commonly call them but their actually called cable ties. In case anyone wanted too know lol

[@CountryBoyChaos-jl1fs]

Dang you were going 40 mph. That’s fast for a mini boke

[@melaniehaynes3877]

I dont reccomend zip tieing the govenor arm spring because due to the zip tie limiting the spring it will give it less power for the govenor to control the fuel flow in the carburetor and then would give it valve float and then your probably replacing the valve springs every month or possibly every time riding it

[@ThatTattooGuyOfficial]

Where is the link for the torque converter you bought? It’s not with the other links😢

[@ThatTattooGuyOfficial]

This is a very helpful video thank you btw!

[@amandafryar]

Hi there! I actually didn’t end up installing the torque converter afterall

[@ThatTattooGuyOfficial]

@@amandafryar oh okay, just didn’t work well or ? Thank you for this video btw. Just got my bike yesterday and I’ve done a few things to it already bc of your instruction. :)

[@amandafryar]

@@ThatTattooGuyOfficial we were pretty happy with the current result and didn’t want to push the speed any farther. It’s a great little bike though! So glad the video helped you!!☺️☺️☺️

[@abran-el]

Great video

[@nathangunter75]

She’s beautiful lol, just picked up the same mini

[@AC-jh3pn]

What a cool relationship

[@peaceONearth365]

Awesome video! Thank you

[@jeffsiegwart]

Great information. Thank you.

[@ZacharyParham-x6y]

I'm from the south, and I've always heard zip tie. Only recently have I heard tie wraps?

[@toddstewart9922]

I'm in the South and we say zip ties. 😆 Nice upgrade. I'm doing the same to my Coleman 200u. I like riding this more than my Harley. Be safe and have fun!

[@cjmoore07]

Yep

[@abran-el]

Definitely on ya page I got bike too

[@GenZBiker]

Amanda it’s been about a year since this video, did the engine blow up or has it maintained reliability?

[@jasongilliland9508]

That's a good question.

[@extrap5217]

I did the zip tie thing and mine blew up 10 minutes into riding it. Got to 35 mph tho

[@jasongilliland9508]

@@extrap5217 yeah I blew my first motor out in about an hour, but I was holding it wide open the whole hour. Now I only hold it full throttle for a couple minutes at a time

[@captaindonut22]

Didn’t blow mine up. Gonna fix it tmr

[@jessiebaker4539]

Playing with the governor witht he zip tie setup is safe? My brother removed his governor completely and had blown the motor and replaced it with a predator 212 from Hbr freight

[@roypatterson9910]

And with the 225cc Tillotson Performance Engine, you should replace the carburetor that came with it and put a 24mm flat-side Mikuni carburetor on it, then it'll go even faster, that's what I did.

[@sjvieaux8312]

I love this video and it's helping me out alot right now. I just picked up this exact same bike a couple days ago and I want to do exactly what you've done to it. I was looking through the links and was wondering what the cross-bat is for? Do I need it?

[@justinhargety]

Did you find out what the correct torque convertor for this was? Can you make an installation video for that?

[@MichiganMade989]

???

[@amadorchavez3233]

Love this video

[@adamstainker5411]

They sell an adapter that you slip right over that because it's five Ace it needs to be 3/4 I ran into the same problem but found the shaft adapter haven't had a problem

[@thorasguardselectrician2013]

We just put a vm22 mikuni, love that bike! My son and I are in the process of making a spacer for our exhaust.

[@christopherhousey8516]

Nice

[@bmwvillan]

Thank you for the very informative video honey! This helped a lot made my day even better with a little boost!

[@ThePhatGuy1776]

All you gotta do is heat the pipe with a map gas torch and bend it until it clears the frame.

[@d.j.sanmarco2184]

Zip ties...gret job btw :)

[@EbikeAdventures667]

We call them Zip tie in IL

[@freshram192]

Can you do a video on the tie wraps for the governor please.

[@joeyounts2922]

Hey I think you should do a Captain Kirk mask conversion video. I saw your bin trimmer conversion and loved it!!

[@proudtitanicdenier4300]

can you please give the link of the 5/8ths 3/4s adapter?

[@sjvieaux8312]

What about the hole on the side of the head that the original carb was connected to?

[@dabrokest530]

Nice wrist tat!

[@marquislewis1767]

No video on the torque converter install? Curious to see the speed difference

[@amandafryar]

Didn’t end up installing it!

[@TheHondaracingpower]

Dude that was amazing. I picked a Coleman ct200u and I’m getting ready to mod it. I definitely want that carb so thanks for that link. Was there a huge difference in the carb upgrade by the way was throttle response way better?

[@amandafryar]

Major!!!

[@TheHondaracingpower]

@@amandafryar awesome good to hear. I should probly do a video on mine just like you 🤔 lol keep up the good work I love your mini bike vids!!

[@Mason_diehl]

Where’d you get the grips

[@niknewton221]

I get the zip tie method with the governor but I just don’t want to blow up my engine by raising it to high of an RPM

[@mokebang7526]

Reviews are saying some parts of the bike have low quality welds such as the headlight. How does the bike hold up with your experience?

[@amandafryar]

We’ve taken it through the wringer and so far so good!

[@joshhawn3988]

you should run a chain straight from the clutch to the rear sprocket, you'll get 55mph easy have yourself a little street cruiser.

[@speedyone5924]

What app are you using for that speed test,..thanks again,..

[@joemamagaylol5875]

Well I use speedometer it works really good actually

[@joemamagaylol5875]

So I think you should use that it’s free too so yeah 😁

[@adamstainker5411]

The only other thing I've done to mine which is the exact same as get a torque converter now goes about 45

[@keithcola2516]

I have the Coleman same bikes!! But one thing is totally different the seat springs Coleman's DNT have these!!!! I'm so mad rite now!! Lol why don't we have these?? Oh well I guess I can order the package from that company thanks for the share

[@dinocitybikelife]

the throttle set up you took off of the metal bar arm is swinging in there

[@TristanMusgrove-l6n]

How did you get the handlebar grips on you glued or used an air hose/compressor?

[@huntercarrillo2757]

Woulnt the rest of the governor linkage fall right in to the motor and lock it up

[@toddsimmons6003]

Great video 😊 Have you seen any downsides to the mods? Does it push the engine too much?

[@beanburrito6951]

I know this may be a little late, but I have the same bike. I have a problem with valve floating and the bike miss firing after putting an air filter and removing the governor. I would recommend getting atleast 18 pound valve springs and upgrading the spark plugs. If you want to get even more performance out of it you might want to look into upgrading the flywheel and rod.

[@ismokcigz3452]

@@beanburrito6951i have the same problem now on mine, what did you do if you don’t mind me asking

[@MrsFlutterby4]

Is this video overlay graphics - it’s impossible to see what’s going and affects my vision issue or is something with you tube?

[@quixy-2030]

More!!!!!

[@ScottJohnson-s9d]

What sprocket did u use??? I’ve order several rear sprockets that don’t fit

[@EastonBarnard]

I have a Colemen ct200u-ex will these mods still work on it

[@manicvortex]

Ive never heard of a zip tie being called a tie wrap. I was so confused what u where tryn to point out until i saw the zip ties side by side.

[@braydokame2281]

what happens if you take the govaner completely off

[@granto-zg8hp]

My parents got me one of these as a late b day gift and i was thinking of getting some of this stuff to make it go faster with the money i make from mowing lawns! And i was just wondering where that sprocket is from, i clicked on the link and it’s not there. :(

[@albertpeterson7134]

Amanda At The Very Least You Should Put On A Billet Flywheel When You Delete The Governor. Your Stock Flywheel Can Come Apart At Higher RPM'S. Bad Things Can Happen

[@mzwalker2082]

What size was the socket to get that screw out for the gas tank by the spring?

[@bjso_ill7944]

8mm

[@joseguillen603]

I bought the same carburetor you linked and main Jets but I can’t unscrew the OEM jet from the other bronze part

[@amandafryar]

You may have to use a tool to hold that bronze part in place while you unscrew that jet

[@mikeecko]

I'm looking for this boy...... John Connor.... Have you seen him? I don't think you'd catch John on his dirt bike with your mini bike though 🤣🤣🤣🤣

[@chrisrb7876]

I think if you test fitted it once more, you’ll find it fit without the removal of that bar

[@BraxtonPlanck]

How did you bend it back?

[@ogpeek_a_boo9896]

What was that adapter? To make it fit

[@carrielynnroberts9647]

Hey Amanda here in Connecticut we Call zip ties

[@Hogies293]

What adapter can you use with the 3/4” torque converter from OMB warehouse? The one I have does not seem to work with that specific torque converter as it has built in keys on the clutch.. If anyone has a suggestion please let me know.

[@ajlaporte8154]

What torque converter did you buy? So I don't make the same mistake.

[@ballgame3273]

Can you give tips on my bike??

[@evansomebodyoutdoors6018]

How did you bend it back mine won't move I tried so many times do I need to take the exhaust off?

[@austinwaite17]

What torque converter did you use? Link possibly? Just trying to make sure I get the right one.

[@Wesley50009]

What was the name of the exhaust you got?

[@Gtsport33]

Did you and your dad take the governor out. I would definitely like to know

[@goeblejames6739]

What size chain you have on yours going to do same mods but would like to have same rear sprocket but is it 40 size chain you ebay doesn't show the sprocket thanks

[@DodgerthaRoger]

Ty rap is a brand of zip ties. (I’m a southerner) 😜

[@michaeld4059]

Watched another video one guy says zip tieing the governor can run ur rpms to high and could potentially damage my motor

[@ismokcigz3452]

i have a question ab my axism200 the black tubing coming out of my head is it supposed to stay in or do i pull it out when upgrading to stage 1 cause when i hook the new carb up there is no place for it and when i start the bike up it idles bad and when i give it gas it dies please answer i’m stuck

[@laithen4515]

I did this to my bike and my motor blew up? Can someone please explain why my bike did this

[@tredyeify]

Can you list all the Amazon parts that you bought with all the numbers so It can make it easy for me to order them all thank you so much

[@alexanderchavarria172]

I have a question. Are these bikes legal to ride on the streets?

[@NavjotSingh-or6rr]

hey i just got the bike but there is alot of white smoke any suggestions to the cause, I also used like a 3 year old gas that was laying around, but could there be anyother problem??

[@JblendzVidz]

What chain?

[@DIYbecause]

What was your top speed once you got the torque converter on?

[@buddahmayne9273]

What speed app is that?

[@nicholasventura4107]

I am having trouble keeping it idle keep keep kicking off can you suggest something

[@ventxnatv]

Do you need a new throttle cable or was that optional?

[@parttimewoodcrafter307]

Probably needed in order to have the right end to connect to the carb.

[@dinocitybikelife]

You can blow ur motor by bypassing it like that yu have to open the motor and fully remove the gear

[@chrisrb7876]

Standby for valve float

[@chadsenters00]

Any updates on the bike?

[@GeorgiaRidgerunner]

Cool video but do yourself a favor go ahead and change the spark plug Those chinese lg or torch plugs quit working without any warning Your local parts store Will have the plug you need