Babbitt Pour 2024

[@franksmodels29]

Hello old friend good to see you posting 👍🏻👍🏻👍🏻

[@TechGorilla1987]

I'm 8 minutes in and I really think that your editing and pacing of this video is really spot on. It clicks right along without fluff or too much commentary. I like it.

[@walterjoncas12]

Thank You Keith. Nice to see you working on a prop shaft related video....Walt

[@AmateurRedneckWorkshop]

Pouring metal is always a fun thing to do. Thanks for the video keep on keeping on.

[@shaolinshaotse]

Keith, thanks as always for everything you do to further and share the craft! I just wanted to chime in and say that you are truly one of my great teachers and heroes in life. While I may deeply disagree with the politics, that would never change my deep respect for you as a tradesman, an artist, and a person with a true love for his country and best intents in his heart. I can only hope there are many out there who can separate politics from friendship and respect for others as equal contributors to this great nation!🇺🇸🇺🇸

[@KeithFenner]

Thank you and I wish the same for everyone else as well.

[@doctwiggenberry5324]

Sure have missed your posts such good info and reliable from a seasoned professional. Keep em coming.

[@frankerceg4349]

Thank you Keith!

[@TechGorilla1987]

Howdy, Keith!! I hope you're well, brother. I love to watch babbitt pours!

[@ls2005019227]

Always great content & information. Thanks Keith!

[@ÁREAJ27]

Olá amigo Keith, agurado a continuação de mais este trabalho!!! Boa sorte sempre!!!

[@ypaulbrown]

enjoying the somewhat new format Keith, best wishes, Paul in Orlando....

[@peteengard9966]

Last week that room was full of shafts. You put some serious work out.

[@garybrenner6236]

Last week,? W at channel have you been watching, he has not posted here for over a month!

[@peteengard9966]

@@garybrenner6236 I was at his shop..

[@peteengard9966]

@@garybrenner6236 I was at his shop.

[@stevenclaeys6252]

Thank you for another great video. Cheers

[@swanvalleymachineshop]

Good one 👍

[@grntitan1]

Damn that’s a nice oven. Color me jealous.

[@TrPrecisionMachining]

very good video mr fenner

[@liaschinko]

Fenner since you put country in intro, my messege to you is Darius )))))

[@HaxbyShed]

That was great. Thanks

[@Daledavispratt]

Thanks for the upload, Keith. Like the new intro, too. Interesting to see how many gaskets get blown in a good pressure-test. Well-done 🙂

[@steevalen-eq1cd]

HOW IS THE LATH GOING ALONG KEITH . GOOD TO SEE YOU ARFTER SO LONG. MISSED YOU BUDDEY.

[@bcbloc02]

You can borrow my boring mill to knock those line bores out easy if you want. 🙂

[@mitchdenner9743]

FJB. Hi keith.🖐

[@TechGorilla1987]

LGB-FJB+

[@howardtoob]

Oh yeah baby! Another KF video!!! You da man!

[@12345NoNamesLeft]

Super oven.

[@howardtoob]

Joined and more than happy to support a great patriot. Anyone who has a problem should remove emotion from their decision making process.

[@johnmeissner8715]

You can get the Pledge of Allegiance now included in the new bible that Trump is hawking. No need to be listening to children being indoctrinated into false beliefs. Trump is Putin's puppet.

[@robertpeters9438]

If your oven does not turn off when you open it...be certain you do not bump the heater elements! They could be electrified...and an impact can break the insulation!

[@billlastwits8229]

Thats very strange. I never took trump or biden for someone who even knew what babbit was...... Learn something every day

[@steevalen-eq1cd]

😂😂😂 BIDEN DONT KNOW HIS ARSE FROM HIS ELBOW.

[@ianlangley987]

Hi Keith, a good video again. I served my apprenticeship in a marine repair shop and we used to remetal a lot of bearings for ship main engine and generators. One of the things we used to to do before the pour was to tin the two halvs. Are you going to do that? Cheers Ian

[@gary23jag]

Tinning is the most important part of the process.

[@bigunone]

I found your channel looking for an example of pouring babbitt bearing for someone on a forum

[@fainderskurs-koi8767]

лайк

[@AxelP33]

That intro song is badass, where is it from ?

[@KeithFenner]

From my power director library

[@glenc90240]

Did you consider using Babbitrite/Deacon Mold-Pac to help with the pour?

[@henrikjorgensen1614]

Bahco wrenches are the best as i see it and 40 year experince make me say that

[@ashleys9949]

The myth the man the legend ❤

[@Kenjiro5775]

You forgot "The Army Goes Rolling Along", "Anchors Aweigh" , "Marines Hymn", "The U.S. Air Force", "Semper Paratus", "Always Ready, Always There". If you need to wear your patriotism on your sleeve, then do it correctly, or don't do it at all.

[@lloyd4768]

I never heard of job shop? How can we watch on that??

[@bardiajelveh1433]

Hello In your opinion, how can we do the adhesion of Babbitt material on MO40 material with high quality. We use special tin plating for this type of tin plating operation. How do you do this? can you explain?

[@KeithFenner]

I have a new video on tinning.

[@bardiajelveh1433]

@@KeithFenner what's your whatsapp number sir?!

[@bardiajelveh1433]

@@KeithFenner what's your whatsapp number sir?!

[@bardiajelveh1433]

@@KeithFenner what's your whatsapp number?!

[@bardiajelveh1433]

@@KeithFenner what's the name of this liquid you use????

[@chickenringNYC]

Lame. Keith jumping the shark.. again?? He'll be back.

[@mikefrick6023]

is this the first time you have poured Babbitt I have poured lots of babbitt and never had the problems you have had. We use Bear Shite to pack around the mandrel to keep the babbitt form leaking. and always have more babbitt melted than you need for the job. For boat shafts we pour smaller and then bore to fit the shaft. Not impressed with your set up.

[@CrimeVid]

Have you moved Shop again Keith ?

[@grntitan1]

No, he’s in the back room.

[@dizzolve]

looks like Biden isn't getting in your way of getting work. At least you're busy

[@CRUZER1800]

Are you saying I'll have to join "jobshop" and pay $5 to see the pour?? Been watching you almost since you started... Not only do you not get my 5 bucks.. You loose my subscription..... and you can keep your politics to yourself... Russ

[@howardtoob]

You're an emotional thinker. Take emotion out of your decision making process.

[@CRUZER1800]

@@howardtoob F**K Off.... How's that for an emotion??

[@CRUZER1800]

@@howardtoob You are saying having emotions is a bad thing? I feel sad for you.... How's that Keith?

[@howardtoob]

Typical. You take my statement and arrange it in a way that I didn't mean it. You cherry pick certain words, ignoring the ones that make the point I'm trying to convey, and taylor them to your emotional mind set. Stop being the way you are and start thinking clearly. Grow up. You're welcome.

[@johnmeissner8715]

@@CRUZER1800 You portray a typical follower of someone who wanted the Capitol trashed and Mike Pence hung for being a true American. What would you do if a gang of (hah)hostages stormed YOUR house busting up the place.

[@40cleco]

Watched your channel from day one Keith. Don't know why you have to bring politics into your work. I am not for either side..they are both crap. I cannot believe that the United states of America could not find any better people for you to vote for. Good luck. Unsubscribed.

[@ducewags]

@40cleco We will see you back in the comments real soon.

[@grntitan1]

K. Bye

[@NavyChiefPa]

This is way too edited down. Too missing content.

[@DirtForester]

Thought you quit KZbin to prove a point?

[@leroyc179]

bits and peace's👎