Baby AR Wing PRO 682mm, 117km distance setup!

Total traveled distance : 117.84km @ 1h 40min 58s
Average speed : 70km/h
Airframe : Sonicmodel Baby AR Wing Pro 682mm kit
Motor : Xnova 2204/2350Kv
Prop : masterairscrew RS 5*4.5(differ in the video, I replaced it just before the flight)
ESC : hobbywing 40A micro(obsoleted)
Servos : Emax ES9052MD
FC : matek F405-WMN + INAV 6.1.1 firmware + 6.1.0 configurator
GPS : RUSHFPV GNSS mini M10
Camera : Runcam phoenix 2 SE
VTX : AKK Infinite DVR VTX
TX : Radiomaster BOXER ELRS@LoRa 50Hz
RX : betaFPV Super-D ELRS@LoRa 50Hz
Battery : EB-BG988ABY 4.43Vmax 3.86Vnominal 5000mAh * 4ea : 4S1P
(EB-BG988ABY is equivalent to EB-BG998ABY)
Using ISDT charger, can charge up to 4.40V/cell.
etc : EMI shield tape for ELRS receiver : please search "EMI tape", "EMI sheet", "EMI shield"
Bolt spacing(center to center) that provided motor mount is 12mm(M2), but my 2204 motor is 16mm(M3), so I drilled motor mount for 2204 motor.
AUW /wo battery : 245g
Battery weight : 277g
AUW /w battery : 522g

[@Videolinquency]

To me, this is the most impressive flight I've seen for a while, possibly ever. Making tiny craft go far is an elegant art to efficiency freaks like myself. Thank you for the inspiration. Respect!

[@celeselements]

Thank you very much! Also refer my friend's vid! : www.youtube.com/@sacdong

[@DeNikow]

Nice job making that battery pack! Hadn't seen anyone doing it before.

[@celeselements]

Thanks! Actually, this is the alternative I chose because good 18650 or 21700 are hard to get for me.

[@dronepilot260rc]

Thank you for the video!

[@celeselements]

You're welcome! Thanks a lot for visiting my channel!

[@KalibasauRC_64]

Great job, buddy

[@celeselements]

Thank you!

[@KuriOSS]

Wow😮

[@celeselements]

Thank you!

[@zappex92]

nice

[@celeselements]

Thanks!

[@user-otzlixr]

My AR wing i ordered flew all the way from china , to my front door. THats like a billion miles or something.

[@chrisbee5481]

Wow amazing. I'm coming from fpv quads. Looking for a small light fpv wing. The wings must come off and fit in my backpack. Is this the one or any other better alternatives? Thanks.

[@celeselements]

It is one of best wing in recent days, I think. In aspect of size, performance, easy to build,,, I can't find a replacement. It will be easy to do because you already have experience with quads.

[@ardufpv4373]

Great work. What’s the charge and discharge rate for that battery ? Thank you for sharing

[@celeselements]

The battery is made for samsung galaxy S21ultra model. At commercial said samsung galaxy S21 ultra support 45W charging, it means 4V@11A roughly. If the battery can charge 11A, it can discharge over 11A or more. IMHO, at my test, the battery can drain continuously over 20A.

[@k1ortia]

Excellent work. Could you please show how you made your battery pack out of smartphone batteries? cheers

[@celeselements]

Thank you, I'll upload the how-to. If you already purchase cell phone batteries, remove the protection circuit and spot welding the terminals.

[@k1ortia]

@@celeselements That would be great. Thank you

[@razeaz10]

Zajímavé je, že píšete, že používáte baterii LiPo 4s 5000mAh a v OSD máte 9193 mAh. Jak je to možné?

[@celeselements]

Je to proto, že ampérmetr není zkalibrovaný. full flight OSD vid : kzbin.info/www/bejne/ameUZnSpYs-EnZI

[@fizahatnajib8966]

Does the pnp come with the camera?

[@celeselements]

No, The camera, VTX, FCs must be purchase separately. PNP include motor, ESC, servos and prop.

[@fizahatnajib8966]

Thanks for the info

[@mrelashvili]

your average amp draw was almost always above 5-6, but you flew with 5ah battery almost 2 hours. How?

[@celeselements]

Current meter isn't calibrated. full flight OSD vid : kzbin.info/www/bejne/ameUZnSpYs-EnZI

[@pipoypipoy7796]

does the 2204 motor fit in the provided motor mount?

[@celeselements]

I drilled motor mount for 2204 motor. Bolt spacing(center to center) that provided motor mount is 12mm(M2), but my 2204 motor is 16mm(M3).

[@pipoypipoy7796]

@@celeselements do you think it could handle 120mph speeds? Planning to use a t motor f80 pro on 6s.

[@celeselements]

At 120mph(193km/h), In my opinion, you will definitely need laminate film. I use 1.7mil laminate film, but toughness for high speed need more thick laminate film, like 3mil or 5mil. If I were you, I choose 5mil. If you didn't to reinforce wing, it will suffer flutter. Control horn, control surface, control rod, hinge that need to be strengthened, also need to use more powerful servos. If you haven't purchased baby AR wing yet, please consider Swallow S670. It has more strong airfoil. Check my friend vid : kzbin.info/www/bejne/jHrQaWSHe76ggqs kzbin.info/www/bejne/jZWXdpppq6qIes0 laminate film 3mil : alofthobbies.com/collections/new-stuff/products/cp-laminating-film-3-mil-x-18 laminate film 5mil : alofthobbies.com/collections/new-stuff/products/di-laminating-film-5-mil-x-12 An iron is required to coat laminate film.

[@pipoypipoy7796]

@@celeselements thank you very much for the info! Will check out the swallow.