Backwards Cleaning for Awesome Results!

[@dt7250]

Just a FYI, I use a straw at the end of the barrel and it works every time and doesn’t get stuck when I feed it through the break barrel end

[@springpistonriflefeverlone9611]

@@dt7250 Thanks for the tip, and I know about this.😃👍 My tip, try it my way once and you won't be sorry!😃👍

[@danielruprecht8932]

Cleaned mine after I saw your video yesterday. And it did indeed group better 👍🎯❤️🇺🇸

[@springpistonriflefeverlone9611]

@@danielruprecht8932 That is super great to hear Daniel!😃👍

[@SavageAirguns]

As long as the material you pull through the barrel is less hard then steel.... it doesn't matter. You can't damage a steel barrel or soft steel barrel with cloth, brass, or plastic. It doesnt matter which way you pull it through. Now Googone might be a bit harsher than most gun cleaning lubes, but as long as you run a few dry patches of cloth down it to remove the residue, it'll be fine. Looks like that cleaning helped! 👍

[@springpistonriflefeverlone9611]

@@SavageAirguns Thank you!😃👍 I fully believed that cleaning the way I did made all the difference. I believe where the muzzle chokes down, had excessive lead buildup. Going in the reverse direction removed all of that buildup. I have cleaned in the other direction from the breach to the muzzle, but I have never seen such a dramatic difference in accuracy improvement. With the muzzle hidden because of the plastic in the way, cleaning was made much easier.😃👍

[@jcrdeeper]

Great shooting in windy day....and another useful video

[@springpistonriflefeverlone9611]

@@jcrdeeper Thank you so much!😃👍

[@scavengernick3191]

That makes sense. Reverse the lead out of the rifling instead of cramming it in.

[@springpistonriflefeverlone9611]

@@scavengernick3191 Yes, it was a dirty muzzle and cleaning it backwards really improved the accuracy. Thank you for watching!😃👍

[@j.verfaillie5742]

Good shot. I always do two to three patches of balistol starting at the muzzle and then as long as necessary from the breech position.

[@springpistonriflefeverlone9611]

@@j.verfaillie5742 Thank you! 😃👍

[@joeramirez7879]

That's exactly what I use. Brother, it works great. Just have to brush every now and then.

[@springpistonriflefeverlone9611]

@@joeramirez7879 Thank you for watching Joe!😃👍 I believe that it really removed the built up lead at the muzzle.

[@charlesoutdoors2424]

Great shooting. Great tip because a lot of people will tell you not to clean from the muzzle or you'll damage the crown. If your using something that could damage the crown you really should be using it. I have a few guns with baffles I just can't get my weed whacker line to go through due to the curl it has. I guess I need to use a hair straightening iron on it lol. That Goo Gone was recommended a lot on the GTA forums. Especially for Chinese and Turkish made guns. You do want to be careful with Goo Gone. I watched a guy use it to remove a stubborn sticker of a new refrigerator door and he rubbed it down to the bare metal. I wouldn't want to accidently get it on a stock or breech seal for too long. I sure like those area's you shoot at where you can fish and shoot.

[@springpistonriflefeverlone9611]

@@charlesoutdoors2424 Thank you Charles!😃👍 I can shoot almost anywhere here in South Dakota.😃👍

[@charlesoutdoors2424]

@@springpistonriflefeverlone9611 It was that way here 15 years ago. It's growing up around me and fields being bought to put houses. Lost Access to the Red River outside of town about 20 years ago. Now it's about 30 minutes away and overrun with those dune buggies and four wheel drives. Public land closed to all target practice. Private land is fences and no trespassing everywhere just about. I didn't move far enough out 30 years ago.

[@springpistonriflefeverlone9611]

@@charlesoutdoors2424 Sorry to hear that.

[@Moses1973]

Hey chuck is the wind blowing there lol. Here in the hills this morning it was kinda bad. It has calmed down a bit now. Great shooting by the way!!!

[@springpistonriflefeverlone9611]

@@Moses1973 Thank you!😃👍 I saw on Kello Land this morning about the forest fires. 🔥 Stay safe.🙏

[@WCO3]

I like it!! You're method would put less googone On the breach seal. I use denatured alcohol On my patches, but it's not as effective.

[@springpistonriflefeverlone9611]

@@WCO3 That was my thinking🤔about going in the opposite direction. It really cleaned the muzzle where the pellet gets its final choke before exiting.

[@airgunnostalgia4210]

Wow Chuck, super impressive shooting with that wind! Are you doing some holdover to counter the wind at all? Have a special Sunday with your family!

[@springpistonriflefeverlone9611]

@@airgunnostalgia4210 Thank you Anton!😃👍 And thank God we are finally getting a break from the heat this week, because yesterday made it to 101°F. In the first shot group I was aiming dead on. The Hatsan 125 is cooking at 920 FPS with the CPHP. So the wind doesn't affect the pellet flight as much. You also have a great time with your family!😁

[@johnnyhouston9913]

Hi Chuck, how's things in South Dakato.. Nice tip on cleaning the barrel of your Rifle and Hot shooting to.. I hope you and your family are all doing well.. 👍✌️👌

[@springpistonriflefeverlone9611]

@@johnnyhouston9913 Thank you Johnny Wild Man! Family is good 🙂 and the weather was extremely hot 🥵🔥 today. It feels good to be kicking back in the air conditioning.😁

[@johnnyhouston9913]

That sounds good to me Chuck chilling out with the air con on👍✌️👌😀😀 here's a bit of kind of useless information Chuck🤣🤣lol. "" Like most states in the U.S., Daylight Saving Time is observed in South Dakota Time , where the time is shifted forward by 1 hour, resulting in a 5 hours and 6 hours difference behind GMT for the Eastern and Western part of South Dakota Time respectively. "" so basically Chuck your 5-6 hours behind Scotland.. 🤣🤣Lol.. You may feel free to pass this useful or useless information on to someone🤣🤣🤣lol.. Maybe at a party or a barbecue you can bore the ass off someone with this information..I don't know why I googled it, I just wanted to find out for some unknown reason😂😂😂 happy Sunday Chuck.. 👌✌️👍

[@springpistonriflefeverlone9611]

@@johnnyhouston9913 That stuff is interesting. I always wonder 🤨 what time is it in other countries? Good morning 🌄 good afternoon 🌞 good evening 🌆 lol.😆👍

[@johnnyhouston9913]

Lol😂😂😂 Good morning Chuck 🤣🤣lol.. Its now 1-40 pm in Scotland 😂😂 Last night I was thinking to myself I wonder what time it is where Chuck is at 🤣🤣lol.. Funny how the mind works Eh 🤣🤣 you have an awesome Sunday👍👌✌️

[@martinlye7111]

Not ever cleaned mine. In about 10,000 pellets. Still shoots fine. But I don't shoot in wind. 😂

[@springpistonriflefeverlone9611]

@@martinlye7111 I usually didn't clean the barrel that often, but I can really see the improvement in accuracy.😃👍

[@donoliver96]

Get a boresnake and take the brush out it works great for me now going 15 years

[@springpistonriflefeverlone9611]

@@donoliver96 Or a weed eater string 🧵 it works fantastic for me!😃👍

[@LowkeyAirgunner]

The only reason why it is recommended to do it the other way is to reduce chances of scratching up the crown it should do about the same other than that For the product used unless you get some on seals it is definitely fine I just like to be extra careful myself The Dakota wind is still going strong haha

[@springpistonriflefeverlone9611]

@@LowkeyAirgunner Yesterday with Autumn 🍁 blowing 🌬️ in the wind 🍃 was no joke! Ps; the big cannon 125 has been on the shelf for a while since I got my new HW50s 22 caliber!😃👍 Oh, also I got another 29 days of jail in Facebook for sharing an Airguns of Europe video. Now we know that Facebook will jail for any reason. Have a great Sunday!😃👍

[@LowkeyAirgunner]

@@springpistonriflefeverlone9611 Well I definitely would give it a bit of love if I had a HW haha Autumn is coming in with strong winds and cold nights out here too but eh... I guess I still have arround 1 month before freezing 😢

[@springpistonriflefeverlone9611]

@@LowkeyAirgunner A special time to get ready for snowshoe hare hunting!😃

[@LowkeyAirgunner]

@@springpistonriflefeverlone9611 Yeah kind of haha it is still very bushy and it will be almost until the snow comes in Season is opened tho and they must be slowly starting to become white

[@Laoveyn]

Hello, Chuck. I want to consult you about something. I fired 400 shots with my rifle yesterday. The screw on the trigger guard is loose. What can I do to prevent these screws from coming loose ? I thank you in advance :)

[@springpistonriflefeverlone9611]

@@Laoveyn First of all, I clean the screws and inside the screw inserts with rubbing alcohol. Then make sure that everything is dry, then add some blue loctite to the screw threads before reinserting them. Let it set up for 24 hours before using. That should take care of the problem. 😀👍

[@Laoveyn]

@@springpistonriflefeverlone9611 thank you so much dude :)

[@Laoveyn]

Chuck, I want to ask you something. Is the original version of this rifle accurate enough to hunt pigeons ? For example, can this rifle shoot a pigeon from 50 meters ? ( Original version )

[@springpistonriflefeverlone9611]

@@Laoveyn Thank you for the question.😃👍 I was doing a little plinking with the 125 on a small soup can yesterday at 50+ yards hitting the can repeatedly very hard. 😃👍

[@Laoveyn]

@@springpistonriflefeverlone9611 Thank you so much for the reply Chuck :)

[@donoliver96]

How do you keep the patch on the weedeater sting

[@springpistonriflefeverlone9611]

@@donoliver96 I melt the weed eater string with a lighter. Then I push it against a flat surface. As soon as it looks about right, then I stop. A weed eater string will smash down to size, as long as you don't make it too big. 😃👍

[@ADAM-qr7bi]

hey brother. this might be a stupid question but what is the black gunk thats inside of the barrel. i want to re-foul up a barrel i cleaned. the reason being it was accurrate w/ CPHPs before i cleaned. now it isnt. i thought it was the barrel but it was the scope. cant find an answer to this. hopefully you or someone here can help. btw it is a gamo wildcat. dont use the supplied scope. useless.

[@springpistonriflefeverlone9611]

@@ADAM-qr7bi The CPHP and other Crosman pellets are very dirty and are lubricated. All of that gunk mixes together and leaves your barrel a mess. Some people suggest buying JSB or Air Arms pellets, but if your Gamo likes the CPHP, just run a few patches through the barrel before every shooting session.😃👍

[@ADAM-qr7bi]

@@springpistonriflefeverlone9611 Chuck thanx for responding the thing is i dont want the barrel to be clean. i want to RE-FOUL the barrel w/ what ever it is that gun companies use to foul the barrels to keep them from rusting. just want to know WHAT THAT GUNK IS. thanx again.

[@ADAM-qr7bi]

ok i guess it was a dumb question

[@springpistonriflefeverlone9611]

@@ADAM-qr7bi Not a dumb question.🙂👍