RUST REPAIR: HOW TO FABRICATE AND MIG WELD CUSTOM PATCH PANEL

[@jparish2469]

i am honestly getting excited here that front looks like a old school future rod love it .thanks as always

[@jamescrook3563]

Now that makes the front end of the car more finished and balances out the looks. Watching the rust repair is awesome as it teaches me so much. Thank you

[@rcbodyshopfr]

100k! Bravo you really deserve these followers! Today with this front part Chad was slower than usual, taking time to "look" and see the right way to do!

[@jamesgoucher862]

Everybody doing their part to create a wonderful nightly show. God bless the Hiltz Auto Co. team.

[@jodichristensen9536]

Congratulations on reaching 100K subscribers, Chad and Jolene’s channel deserve 10 times as many subs if anyone does, just on hard won knowledge and patience alone. This learning channel is infinitely better then the Bad Chad TV show ever was, & now you get your KZbin wall plaque award! Grinding and flapper wheeling on your way to 1,000,000 subs!

[@johnmacintosh1343]

A very large 2 thumbs up to Chad Jolene and Fina for reaching 100,000 subscribers that is awesome👍👍👍 so glad to see great local nova scotians fulfilling there dreams and goals!!!! This show ROCKS!!!!

[@robf.3271]

Had my doubts on the headlight buckets, with the lower pan a definite improvement...your right again Chad. Thanks for sharing the content on your channel.

[@gregoryscott9767]

Another lovely day in the fina shop. You guys take care. Love watching this build and Jolene is doing such a great job with the camera

[@donaldshortreed3011]

Thanks again, Chad, for teaching us so much about building cars and thanks to you Joline for your impeccable filming and presentation. What a team!

[@colinstables]

Congratulation on the 100k, well deserved, your work ethic is an inspiration, I rebuilt my pillar, and inner sill today as fast as I could

[@mikedrapeau2794]

Jolene is just as much of an artist as Chad in my eyes, literally, her camera work is top notch.

[@MrMudmantwo]

The front pan looks like will work. It looked bad when it was on the floor

[@MartinMcMartin]

Harder than it looks too, even though she knows Chad better than anyone else, it is hard to predict where he is going to go, film it, and not get in the way.

[@nachocroes8075]

Thats rights sir .

[@jimcoplan9502]

Always a great day for a lesson from Chad Jolene and Fina with Aidyn helping too. We are getting very close to sandblasting time.

[@davidmessersmith6490]

Great watching the teacher teach and the student listen and learn. Really do like the build

[@adamdawkins4833]

Hi Chad and jolene watching from the uk here, I know nothing about cars and car building but I enjoy these videos unlike so called car building shows you actually show us building a car and explain what you do and how to do it which I find very interesting, some other shows ( not naming anyone) but they more about look at me and what I got boring .... I wish you nothing but the best in what you do and if I every lucky enough to get a bunch of money you would be the man to build me a car 🚗

[@tonylashmit2613]

Another day another great video by Bad Chad and Jolene! ......and the award for best Director in a educational Series is Joline Hiltz!

[@psnaith1]

Just got home after a very long day, having a glass of wine and enjoying my favorite show!

[@roymazac2532]

Looking forward to seeing how the bed and cab come together. Your doing a good job it's coming along. Texas

[@nosparex]

Looking forward to seeing the bumper (hopefully tomorrow). Good work, all!

[@richardjennex6583]

Chad makes it look so easy and I love how he tells you everything also he builds this beautiful cars with tools most ppl have in there shops

[@scottimc72]

Nice work on the colour coding of the grinder plugs Jolene!

[@MF-rn5os]

best part of my day is seeing a new video from Chad. Congrats on the 100K Subscribers

[@vincemealing7507]

Another excellent auto-fabrication lesson, can't wait until the sand blasting to see your vision that one step forward.

[@muzgray7193]

Each piece you are adding is giving the vehicle some more form. Keep up the great work guys :) Cheers from Sth Australia :)

[@yvonboudreau3932]

With every weld the truck gets closer to completion. This unique vehicle is going to look amazing. Chad and Jolene you have made it to 100,000, congrats. It is well deserved. Enjoy your day.

[@timganning9775]

I am so happy to see a young man interested in car restoration. This is quickly becoming a lost art!

[@56CrownVick]

Front end is coming together nicely. Great job Chad, Jolene and Aidyn!

[@jimwilson465]

This truck is looking good. Really looking forward to seeing how the front grill turns out. I think it will really set off the truck. Keep it up!

[@dereksimon3437]

I can't ever get enough of seeing the progress you're making on the Cabover! Maybe you could call it Frankenstein or something. I do love it though!

[@jamesmccrindle1022]

THIS SHOW IS THE MOST REAL AND ADDICTIVE KZbin CHANNEL ME AND MY FAMILY HAVE EVER WATCHED, WELL DONE CHAD, JOLEEN,FINA AND AIDEN WHOS LEARNING FROM THE BEST OLDSKOOL CUSTOMIZER IN THE WORLD. I HAVE WATCHED EVERY CUSTOM CAR SHOW EVER MADE .IM SICK OF LASERS , MEASURING,C.N.C MACHINES,WATER,JETS,PLASMA TABLES, COMPUTER MODEL'S, BLOODY PLASTIC LAZER PRINTING MACHINES. IT'S ALL SO O.T.T . SO ITS NOT BUILDING HOTRODS ITS C.N.C LAZER PRINTED COMPUTER BUILT GARBAGE. IT GETS OLD , SO TO THANKS HILTZ AUTO 4 KEEPING IT REAL !!! SO WE NEED TO TELL THE WORLDS HOTRODDERS TO EMBRACE BAD CHAD CAUSE GENE WILDER TAUGHT HIM AND WHEN GENES GONE CHAD WILL FLY THE FLAG AND KEEP HAND BUILT CARS ALIVE, SHARE ,SHARE , SUBSCRIBERS KEEP SHARING ,WE NEED THIS , PURE HOTRODDERS HANK

[@trickysubject8563]

I had an idea regarding the back end Chad. I imagined a roller shutter door with the tracks welded along the inner rear quarter panels with the shutter roll behind the cab. It could open up to reveal a tool box and a fifth wheel. Just a creative thought that was maybe worth mentioning. Kudos to you guys for such awesome content. 🇬🇧🇨🇦🙏

[@bd9875]

A fifth wheel would be awesome. "Hotrod Hauler" roller door too! That would be unique and what a reveal it would be.

[@trickysubject8563]

@@bd9875 cheers Brian, it just looks like it should be there. Hopefully Chad or Jolene will see it. 🙏

[@garagevanalleswatofficial2241]

I got respect for what you, Jolene and ayden are doing love this channel

[@markdutka3774]

Almost one hundred subscribers that is quite the accomplishment and hard work. Congregation Chad & Jolene you both have earn it. Thanks Mark Dutka

[@brucewitcpalek5120]

Another day another lesson from the master himself…. Chad makes it look so easy but it really is not that easy unless you have his kind of experience and shortcuts !! And of course Time for my couple of beers 🍻🍻 !!

[@cannabisticannabisticino2718]

What I like about your videos is that they are always live. It's not a theatrical show like many youtubers do, it's all true here. Greetings from Switzerland 😎👍

[@gr8ride1]

Chad always in a happy mood. Great episode good to see the young fella back

[@shirleyconnieware7869]

Hello to Chad, Jolene and Fina. Here in Louisiana waiting for Chad to do some more amazing work on his project.

[@vwcoco]

Congratulations on reaching a well deserved 100,000 subs !! Keep up the excellent work

[@kwikslvr73]

Keep up the good work.It's ,another great day to learn something new!

[@capt.spaulding5858]

Congrats Bad Chad & Jolene! 100 k ! Love the show , rock on !

[@donthompson9300]

Another great video today. I hope Aidyn watches the video's afterwards to see what Chad is doing while Aidyn is stuck under the front of the truck bolting the panel on. He should be a wealth of knowledge within a year.

[@russupsidedowntopbottom955]

i enjoy watching you turn rust and flat steel to a custom creation. keep up the great content

[@markkeen5091]

Woo hoo! You hit the magic 100,000 subscribers milestone. The sky is the limit from here. I love the show and watch every day!!!

[@steveconsani3718]

WHOO HOO, each day closer to sandblasting! Great job, Chad, Jolene and Aidyn.

[@gemballacirrus]

This build is running quite along & fast! I still remember when the Merc would sit in front of the shop!

[@ronc6249]

Chad and Jolene thank you both for all that you do! Jolene you are the best in the Biz with your filming! Chad you are just so awesome you can make anything from nothing and do it without all the fancy tools. Great work both of you! Also I did try to email you a picture that I came across the other day, it was a scale model that someone had built of the Green Goblin! The email link kept taking me to your home page and wouldn't let me send it. I also tried to share it on your Facebook page and it would not show up on the page. So I did send it in messenger so hopefully you get to see it, it was a very well done replica. The picture was taken at a model car contest, I don't know who the builder was but thought you both would like to see it.

[@artjones2498]

i was showing this to my son when we were on vacation last week...he couldnt believe that this started out as 2 different cars...i went back to the beginning of the project and showed him step by step...he is amazed by how its turning out

[@jamesclark1131]

Another lesson in how to get things done. Well done Chad. Jolene and Aiden 👍

[@805ROADKING]

Congrats on the 100K Bud!! Welcome to the Club!!☺

[@kellymalone4920]

Best show on KZbin very informative

[@gilbertlessard4380]

Hi Monsieur Brad. I am an artist from Quebec. I create many works of art with vintage cars as my subjects. I like your work. It is very unique. I like how you make things flow in your designs. For me, there is one exception with your present project… the door hinges would look better if they were backwards when compared to the way they are now. They don’t quite flow with the design. Just my personal observation… No big deal. You cannot please everyone all the time…. Keep up the good work. Your videos are very pleasant and relaxing to look at. Jolene must be a very patient person. Nice synergy there.

[@A-BONEpickup]

bad chad, the billy idol of custom cars, great work keep it up.

[@jimmystephens9728]

The truck is really coming together! You have convinced me that I want a MIG welder!

[@leosimon9463]

Be sure to get gas also for boy work. Fitzees fabrications has a video about why.

[@tammypearson7018]

dennis : watching you weld has helped me at work ,im a stick welder and we have wire feed , now i can do both, thanks Chad

[@kennethamerine8026]

Love the show Chad is a great teacher to Aidyn . Today he took his time to explain things to him and to help him what a awesome teacher to have.

[@daviddekeyser5685]

I can’t believe the work you do on your cars, you are one heck of a fabacate I enjoy your videos I watch you everyday you and jolene.

[@henryescat1104]

Congratulations Bad Chad & Jolene ! Rewards come with hard work.. And you two sure work hard!

[@rickhettwer854]

Coming along well. Looking forward to when you start getting into the body work and paint.

[@steveconway1875]

Big congratulations for reaching 100 K well done Shepherd well done Jolene your wonderful team

[@billgroel4463]

I like the respect you give one another. It’s fun watching your videos. I learn a lot. Thank you for sharing God Bless.

[@juandoe1]

Congrats on 100K subscribers!! This channel is so entertaining, I look forward to watching every day. Chad and Jolene keep up the hard work, 1 Million subs next.

[@martinpersson8253]

Thank you for a good channel, follow every episode you post. In this video, the mic picks up a lot of sound from the exhalation. Get a mic that has a slightly shorter stick before the mic so it ends up two fingers wide just outside the mouthpiece. The mic shall nerver be infront of the mouth but just beside the mouth. Then the mic picks up the sound from the talk well but not the exhalations. Once again you are doing a great job of building this cool car. Regards Martin from Sweden

[@justanonymous8858]

Taking it's final shape. Looking forward to the sandblast and the grille. Thank you for sharing your passion with us. Steve in Texas working on my 37 Chevy truck.

[@donnie2533]

Great video glad you posted keep them coming thanks

[@robertdehaes9329]

Never used chat room before, lots of fun and supportive voices! Keep it up.

[@XCHANGEDAVE]

Wow you're actually bolting something in? I just about fell out of my chair when I saw you bolting in that front piece. Great camera work

[@weathereddog7650]

Oh he is gonna weld on it. Lol

[@XCHANGEDAVE]

@@weathereddog7650 yea, i see that. Should have knowen. Lol

[@Surfweinerhawaii]

That front lip really ties in the front of the truck! Looking awesome!

[@philgogler9091]

Yet again fantastic vlog, with doing, teaching and having fun, the happy trio, Chad,Jolene and Aiden, luvd it, Phil from Mildura Victoria Australia 🇦🇺🇺🇸👍👍

[@martinfowler6512]

I like the front in. I am looking forward to seeing the bumper on it.

[@carssouth9428]

Looks like we hit the 100K! Nice job, all your hard work is paying off. Looking forward to see what you have in mind for the giveaway build!

[@mattcasoni]

Wow next week!!! That’s fast. I’m very happy to see the front set up. Great build Chad

[@rodneyscott6470]

You are a good mentor for adiyn chad keep up the good work I really enjoy the work you and joline do

[@williamlabrie6562]

I need bad chad to make a sit down with old stories from the younger years,I know he was a gangster!he carries himself like a badaxx,we the people want the wild back storie and how building saved your life!!!!please brother!!!!

[@mariamaniscalco7413]

great show guys. got aiden doing all sorts of different things.

[@brittanyzeigler6175]

Great job guys Jolene does amazing job on the camera work

[@davidsimpkin1213]

Congrats on reaching 100,000 subscribers!!!! Jolene continue with your great camera work and keeping Chad focused on this amazing build...

[@kevindisorda1017]

Just got out of work. Turned on your video and noticed you were at 100k subs. Congrats! You guys have worked hard to get there. Hope you reach 200k soon. All my best. Thanks for all the great videos.

[@antoniocovarrubias7831]

I can’t wait to go cruising , on that cabover it’s going to be a beauty! Chad your doing a great design for a classic cabover.

[@shotgun283]

You inspire me to start a project, never thought i could.

[@dennisbarnett1995]

Here to watch yet another segment on the 36-49 build..Glad to see your channel hit 100k . Tgank you chad and thank you joene for your great filming

[@klobucarpa]

We all knew you'd get to 100K subscribers! You deserve it! Gotta tell you, the fact that you use welders, and hammers and hand cutters gives the whole channel that "little German clockmaker" vibe.

[@Alfie289KCode]

Always a good day with Chad & crew online!

[@DroTrebor]

Congratulations on reaching 100,000 subscribers! Great milestone!

[@joeyvattiato9768]

Congrats on 100,000 subscribers cant wait to see the truck after sand blasting,awesome work for our enjoyment..

[@robmosher362]

Good to see that you have 100k subscribers. Congratulations.

[@russtaylor4959]

Congratulations on the 100k subs ! Hard work paid off

[@edreeder9853]

Chad ,you and Joline both do a fantastic job, and having a blast doing it. Keep it up !!!!!

[@larrycrandell7493]

Great to watch you guys work and Jolene is fantastic with the video... thanks for the content

[@parkerherring8838]

Always enjoy learning how to do stuff like that

[@MF-sk6ui]

Congratulations on the 100 thousand subscribers🎉 watch everyday

[@williamlabrie6562]

We all love your channel,keep em coming!!

[@moyadapne968]

Amazing. Someone else would spend hours getting that piece to fit. Chad zipcuts it in one minute. When I bought a battery powered kit, cords became a thing of the past.

[@garyflasha7795]

Congratz on getting 100k subscribers. Keep up the awesome work and show.

[@jamesmccrindle1022]

Congratulations 1000000 Happy Subscribers.

[@johnstewart9396]

Lest get that other side buttoned up and onto the grille. I’m anxious to see how that works. Best hour of the day. Thanks for the bright spot!!!

[@tobistasco9218]

Always enjoy watching you guys thank you!

[@marcbaker2502]

Maybe use the standard front bumper and cut the bottom of the headlight buckets to fit the bumper under or fill in the cars body under the headlight buckets and cut back the inside of the bumpers corners to fit around the buckets Love this build, really great to see all the vision you have coming out in a form we can see. Can't wait till sandblasting and primer

[@garybarry4446]

So good to hear exciting to hear sandblasting by weeks end amazing job on this build

[@garybarry4446]

Congratulations on the 100,000

[@rolla174]

Congratulations on the 100k keep up the great work Chad Jolene and Aiden y'all make a great team.....

[@looneyluke797]

Congrats on the 100k!! Well deserved

[@rickdarr5323]

You all do such a great job... I'm sure you will get your 100,000

[@lorentautfest9108]

My 3 month old love the grinder sparks