Bajaj Dominar 400 | DIY | Chain Setting | How to adjust the chain slack in Dominar 400

[@dipen.nisar.autovlogs]

Automotive Gears / Products I Use Or Recommend: www.amazon.in/shop/dnavlogs-dipennisarautovlogs?listId=1ENX6B4BZTZE1&ref=idea_share_inf Electronics I Use or Recommend: www.amazon.in/shop/dnavlogs-dipennisarautovlogs?listId=31O8KH8APCWZD&ref=idea_share_inf

[@justvish]

brilliant video dude... dont ever stop making videos... if possible pls make video on 47t rear sprocket for dominar.. and what are your views on such a mod..

[@dipen.nisar.autovlogs]

Hello, thank you. I have never done a sprocket mode so far because some were or the other it will affect the performance or the engine. Company does lot of RnD when they launch such things n specs.

[@nikhiljawale5225]

Is it advisable to do this activity with grandpitstop Groller???

[@dipen.nisar.autovlogs]

You can purchase a SVS universal Roller too.

[@praveen5422]

Hi can you share the link for your bike stand

[@dipen.nisar.autovlogs]

You mean the paddock stand ? Amazon has some options. Or call SVS motoworld too.

[@charanreddy101]

Hi bro. Will be there any problem if the marking is not correct and doesn't match on both the sides ??

[@dipen.nisar.autovlogs]

yes - there will be a problem. The sprocket and Chain will not be aligned and will lead to unusual wear and tear of both chain and sprocket. the bike wont be free to ride.

[@lesliegoa]

What exhaust have you fitted? Please send me a link to it. Thanks

[@dipen.nisar.autovlogs]

there are many videos on IXIL exhaust my me on my channel, you can check the exhaust play list

[@dipen.nisar.autovlogs]

kzbin.info/aero/PLPMxfil1mqYML5SeLGXDFw6YVFDpIdllm

[@VinayKumar-cg4mh]

How did you fit the NS tyre hugger? any modifications needed or it’s direct fit?

[@dipen.nisar.autovlogs]

Vinay Kumar - there is a separate video for that in my channel .

[@dipen.nisar.autovlogs]

Here you go - three videos for it. kzbin.info/www/bejne/bXLIk5p5r99lgZI kzbin.info/www/bejne/nIKrdaylpsSBi5Y kzbin.info/www/bejne/oWapo5upbZelnrc

[@lepondyrider9834]

Hi bro, yesterday a mechanic tightens my chain without cleaning and lubing which it makes so noisy after that! Earlier it was so smooth in acceleration. Today, I cleaned and lubed the chain but still it makes noisy as like yesterday! What's the solution, ?

[@dipen.nisar.autovlogs]

this will need to be inspected. noise could be due to n number of things, bad chain, less lube, incorrect alignment etc etc. get it checked and fixed by a good service team

[@lepondyrider9834]

@@dipen.nisar.autovlogs thank you bro

[@dipen.nisar.autovlogs]

YW

[@Himanshugulati7777]

bro i have dominar i need chail roller for dominar so can available it fr me and even i need bike dual stand

[@dipen.nisar.autovlogs]

Hi Himanshu, search for "SVS quick spin" on my channel. That video has the contact details :)

[@abhishekpatil7966]

Hello sir, When I tried to adjust the chain, I found that my chain adjustment nut is jammed. I took my bike to the Bajaj service station but they are telling me that , they'll try to remove the nut but it can break and if it breaks then they'll have to cut the swing arm and remove the nut. And the other option is buying a new swing arm for my dominar ( which is expensive for me ) . Here I need your advice sir! What you suggest I do? I don't want to cut my swing arm.

[@dipen.nisar.autovlogs]

refer my Video on Rusted Swingarm, in that you will notice there is hole from where you can spray wd40 on the chain adjuster bolt. the hole is covered with a black plastic. its exactly on the inner side of the swingarm. spray wd40 from it, multiple times. heat the swingarm bolt area, so that it expands and then these two things should help you to remove the chain adjuster bolt. even if it breaks, you can take the bike to a welder, remove the wheel, axel etc and the welder should then be able to weld something on the broken bolt and twist it and take it out. in any case you wont have to change the swingarm or cut it for sure. if you are around pune, you can visit SK Auto care.

[@abhishekpatil7966]

@@dipen.nisar.autovlogs thank you so much sir.

[@dipen.nisar.autovlogs]

👍

[@Cyber_Shock]

What are you using to get the stabilization?

[@dipen.nisar.autovlogs]

Prateek Ashok - for now trying to keep my hands stable and then KZbin settings to stabilise further.

[@rideyourluck1371]

Verry useful

[@dipen.nisar.autovlogs]

Thank you

[@ijs_autoandmore]

nice and informative, i am about to make a similar video for my dominar but now since i found this ,have shared it already in our whatsapp group.

[@dipen.nisar.autovlogs]

Thank you IJ Singh. I will be adding around a dozen more videos in next two months or so. For DIY maintenance of our Dom. Stay Tunned. May be the group you shared in can subscribe and keep and put respective questions on the videos, will make further ones accordingly :)

[@priyankarmitra3610]

My new dominar 400 ug has starting issues, its a problem especially in traffic, i went to the showroom service they couldn't fix it, please help as it is embarrassing as well as dangerous in city traffic, btw i am from kolkata

[@dipen.nisar.autovlogs]

Hello, Please do Subscribe to my channel, if you haven't . Thank you Also regarding the issue, if you can please DM me on my insta gram. We can discuss ahead there ...

[@aakashgoel2765]

My tyre on paddock stand not moving freely it gets stop too fast

[@dipen.nisar.autovlogs]

This is common with disc brake bikes. Only if it is completely locked then it's a issue. If it's move for sometimes then it's good. But to be safe, check both the markings on both sides. Of the chain setting. They should be identical.

[@rechieemphasis8915]

Very well detailed, I learned a lot thank you

[@dipen.nisar.autovlogs]

Thank you

[@Anway28]

Thanks Dipen Bhai, nice and useful video !!

[@dipen.nisar.autovlogs]

Anway Kale - will make one for our Benelli in coming months. Don't have all the tools as of now.

[@xxaryancx]

Hey nice helpful video but i am not at all able to loosen the axle nut, i tried three times but its not turning . Any issues?

[@dipen.nisar.autovlogs]

You will have to take help of Service station or a puncture Wala to loosen it

[@nikhiljawale5225]

Nice video bhaii

[@dipen.nisar.autovlogs]

Thank you

[@VinayakTopleYT]

Great!

[@dipen.nisar.autovlogs]

TY

[@susantnayak3357]

thank you. nicley explained

[@dipen.nisar.autovlogs]

Welcome.

[@sraj9758]

I am having heating issue in dominar 400 bike bro

[@dipen.nisar.autovlogs]

There are lot of things that can cause heating. 1. Riding at high speeds 2. Riding in heavy traffic 3. Riding in afternoon where outside temp is high 4. Low coolant level 5. Old engine oil (time to change) 6. Clogged radiator.

[@Bikegrammer]

Dipen its would be really nice if you could upload video on how to remove saree gaurd on dominar 400 or maybe if you could let me know?

[@dipen.nisar.autovlogs]

UjjawalJ Delhi - Sure. Will make a video soon. Am travelling now. May be in next two weeks max.

[@Bikegrammer]

Thank you 🙂

[@dipen.nisar.autovlogs]

I have yet to do this :)

[@YtIGagy]

Where did u get that tyre hugger from brother...?

[@dipen.nisar.autovlogs]

There is a Video for Tyre Hugger too - in my channel - More Details are added there. Its from Bajaj.

[@YtIGagy]

Dipen Nisar can u pls share the link ??

[@dipen.nisar.autovlogs]

kzbin.info/www/bejne/bXLIk5p5r99lgZI other videos that I have for the NS 200 Tyre Hugger for my Dominar: Ist one - kzbin.info/www/bejne/nIKrdaylpsSBi5Y 2nd one - kzbin.info/www/bejne/oWapo5upbZelnrc

[@mr.shivam6624]

Getting a ke ke chain Noise while accelerating. Is chain touching the slider, How we can solve such issue? TY

[@dipen.nisar.autovlogs]

Doc Shivam - Unfortunately that cannot be solved. As the swingarm is too long. And the chain is bound to always hit the chain guide. To avoid it brushing against the swingarm itself.

[@deadman89100]

Thanks video 😎👍

[@dipen.nisar.autovlogs]

ING Diego Alejandro Cubillos Moreno - your welcome. Please like and share ahead. Please do subscribe to my channel too. I will be adding lots more DIY videos for Dominar. :)

[@Damik3561147]

2-3 cm?

[@dipen.nisar.autovlogs]

Yes. You can cross check the manual, in that they have given the correct values. Follow that.

[@abhishekrathore2586]

Plz make a video on exhaust sound

[@dipen.nisar.autovlogs]

There is already a video for it, Please go through my channel and you will find two videos.

[@dipen.nisar.autovlogs]

If you have any specific question related to this video / chain setting, you can ask here. and once your have viewed the exhaust sound video, if you have questions regarding the exhaust, you can add the question to that video.

[@dipen.nisar.autovlogs]

Hi Abhishek - heres the latest Video with ixil and Stock Cat Con sound - kzbin.info/www/bejne/j57NYaBoiNeoZ8U - the Description of this New Video has old links too. If you find these useful, please do Hit the like Button, Share them ahead with other Dom friends, Do Subscribe too :)

[@Jose-vh3fl]

What happens if I tighten the chain without any slag Like Completely tighten I'm asking the fact bro

[@dipen.nisar.autovlogs]

Jarvic Jose - the tension in chain will increase a lot. And at some point the chain will break. Or the front axel coming from engine will break or bend. And or the engine will be under stress too.

[@PankajZ]

today!

[@dipen.nisar.autovlogs]

Pankaj Z - mast.

[@manvithalva1831]

U need to improve the audio

[@dipen.nisar.autovlogs]

I don't see any issue in the audio of this video. What's the one that you see.

[@manvithalva1831]

@@dipen.nisar.autovlogs no bro i what I am saying is audio is fine but u have to improve it. Like its too sharp

[@dipen.nisar.autovlogs]

@@manvithalva1831 if it's not sharp many complain that they cannot hear me. 😏😔

[@manvithalva1831]

@@dipen.nisar.autovlogs o then it's fine. Any way nice talking to u. And also thank you for that video it helped me. And I didn't understand y that measure ment needed

[@dipen.nisar.autovlogs]

@@manvithalva1831 that measurements should be same on both side, else the chain and sprocket won't be in one line. Assume chain is perpendicular or at 90 degree. If the setting is different at both ends, the sprocket too won't be at 90 degree. It will be at 91-92-93 or 87-88-89 etc and there will be unequal wear and tear. If this does not help, I can make a video.

[@leonpreston9938]

Good info.. However u should have told people to tighten the 12 number bolt back after the slack setting is done!

[@dipen.nisar.autovlogs]

thanks