Bambu Lab P1P ARC Enclosure Build Guide + 10 Tips!

The ARC Enclosure for the Bambu Lab P1P was designed by our partner, ThrutheFrame, to fully enclose the P1P. In this video, I go over how to build the ARC, and I compare the noise level and temperature of the printer before and after installing the ARC enclosure to the Bambu Lab P1P 3D printer. I also give you 10 helpful tips for the build!
FULL DISCLAIMER:
We (3D Sourcerer) offer this product as a kit for sale on Amazon. In the kit, we provide ALL the components needed to complete the build for $99.99. Through our partnership, ThrutheFrame earns a small portion of each sale, so by purchasing from us, you are directly supporting the creator of this build.
ARC AMAZON LINK:
3D Sourcerer ARC Enclosure Kit for the Bambu Lab P1P
www.amazon.com...
EMAIL SIGNUP FOR NOTIFICATIONS ON KIT AVAILABILITY
forms.gle/Ntxv...
PRINT FILES:
Arc Enclosure by ThrutheFrame: www.printables...
PTFE Adapter by ThrutheFrame:
www.printables...
PTFE Adapter with Cable Chain by ThrutheFrame: www.printables...
Printer Poop Management by ThrutheFrame:
www.printables...
Hygrometer Mount by ThrutheFrame (compatible with hygrometer included in 3D Sourcerer kit):
www.printables...
ARC Organizer by 3D Sourcerer:
www.printables...
FILAMENT USED IN THIS VERSION OF ARC:
Bambu Lab Basic PLA Jade White: us.store.bambu...
Atomic Filament Perfect Yellow:
atomicfilament...
SUPPORT THRUTHEFRAME (ARC DESIGNER):
If you enjoy this build, please leave a "Make" and a review on ThrutheFrame's Printables page. This helps him out more than you know. He constantly works to improve the ARC and add new features, so please consider supporting him by leaving a review!
ThrutehFrame's Printables Page:
www.printables...
FOLLOW ME
Facebook: / 3dsourcerer
Twitter: / 3dsourcerer
Instagram: / 3dsourcerer
TikTok: / 3dsourcerer
Printables: www.printables....
MY GEAR (AFFILIATE LINKS)
Main Camera: amzn.to/3RhrfoT
Main Lens: amzn.to/3XLahlu
Other Lens: amzn.to/3XQueaC
Not-Premium Black Sweatshirt: amzn.to/3WLcWdt
Soldering Iron: amzn.to/3yQFPvf

[@KGBrah]

brother your voice sounds like you smoked 2 packs of cigarrets before making this video ? hell nah 😂😂

[@madebyjwillis]

Hahahahahaha

[@Shayway]

Great video and thank you for supporting the P1P community. I snagged the kit as soon as I got the email saying it was available at midnight last week. Love the content and all the hard work!

[@madebyjwillis]

Thank you so much! Both for the nice comment as well as the purchase! Hope you enjoy!

[@sulphur_fpv]

I purchased the X1C cable chain for my P1P and everything fitted perfectly. It came with the chain, anchor point to the frame, anchor point to the tool head and a rubber grommet for the PTFE tube to pass through the frame. I also noticed that unlike the X1C/X1, my P1P does not have a main board cooling fan so I will be adding one and suggest anyone who is looking into enclosing theirs do some research into the topic.

[@madebyjwillis]

Bambu Lab mentioned in the release that the X1C chain puts a lot of stress on the hot end so they do not recommend using that version of the chain. It may work fine, and you may never have issues, but that is the official stance from the manufacturer. Most P1Ps do not have a cooling fan (as you stated). A cooling fan can be added, but there are various stances on whether this is needed or not. Most have used the ARC without any issues and without a fan. If people have issues with the main board, I’ll issue an update here on KZbin!

[@cybrsage]

@@madebyjwillis They now only sell the X1 cable chain and have it marked for both X1 and P1P. They have a huge notice saying "For P1P 3D printer, cable chain can only work with the heavy duty toolhead cable. Using it with the original toolhead cable to cause any damage will void the warranty." That part is the "P1P Heavy Duty Toolhead Cable" and currently sells for $11.99 USD

[@sulphur_fpv]

@@cybrsage Cheers man, I will look into getting a heavy duty tool head cable for mine, it's probably done about 50hrs with the X1 cable chain and so far so good, I checked that it can freely move and not put any load on the cable but I will replace it now they have one available that is recommended 😁

[@TheNature101]

Is there going to be a Batch #3 before March 31st??? I want one.

[@madebyjwillis]

Some are on the way - should be delivered within 10 days or so.

[@AnonymousRetts]

Do you think the rubber guide that comes with the cable chain is compatible?

[@madebyjwillis]

I’m not sure - I’m not using a cable chain currently (just a small black cable wrap to prevent the tapping noise)

[@desruccursed6798]

Signed up for the email notifications, looks like the kit isn’t available yet but I’ll keep an eye out. Thanks for putting this together. 🙏🏽

[@madebyjwillis]

Nice! Thank you!

[@jp-3dairgunworks152]

great video. I dont have a P1P, but enjoyed watching your build.

[@madebyjwillis]

Appreciate it!

[@MediaMan3D]

This video will come in very handy, as my P1P ARC enclosure kit is set to arrive today!

[@madebyjwillis]

Awesome! I was trying to get it out before they got delivered!

[@ConnorsWorld]

Any idea if this will be available on Amazon again ? I know the video was like a year ago, but I just saw it while looking for enclosures

[@Bearded_Blonde]

For people that primarily print with PLA/PETG will you ever offer vented acrylic panels?

[@madebyjwillis]

Not sure what the benefit of that would be - I use this setup and print 80% PLA and 20% PETG with no issues.

[@Bearded_Blonde]

Just pre-ordered on Amazon!!!! Can't wait

[@madebyjwillis]

Awesome! Appreciate it!

[@FritzsCorner]

I signed up for updates, but curious how much the kit costs. Didn't see the price anywhere on the Amazon listing.

[@madebyjwillis]

$100 for everything needed with Amazon Prime

[@Eric_In_SF]

You never ever ever ever test dB by putting your meter right next to the sound source. 5 dB at 1 inch away. Means nothing go do some Google searches and then re-shoot the video.

[@madebyjwillis]

Hope you have a great day! Thanks for watching and commenting!

[@MrCarCrazy]

Once I finally order a p1p, I’ll definitely pick this up. Oh, and thank you for the 1st 100 gift! I have it in my office.

[@madebyjwillis]

Let me know whenever you order! Might know a guy to hook you up with a discount on the ARC hahahaha thanks again for being an early supporter! Love that it’s in your office!!!

[@drewmalbica7694]

I’ve been so busy I haven’t had time to assemble my arc enclosure. Got a kit from one of the first couple waves. Now I’m stoked to get it. All my parts are printed in petg. Can’t wait to get it assembled and to get an official serial number from thrutheframe.

[@madebyjwillis]

Sweet! Hope the video helps!

[@joelitotek1796]

when does it come back in stock? I want it to print asa.

[@madebyjwillis]

Should be this week

[@joelitotek1796]

@@madebyjwillis awesome, already added it to my cart just waiting for notification 😁

[@madebyjwillis]

Nice! Hope Amazon gets it scanned soon!

[@TheMaxAwesome]

Shows as sold out.

[@madebyjwillis]

It is - please signup for the email list to be notified when we have more in stock!

[@TheNature101]

@@madebyjwillis Will you have more in stock before March 31st?

[@joelitotek1796]

Hey bro, just letting you know.. the Amazon kit comes with the wrong size Allen key.

[@madebyjwillis]

Thanks! The new set of kits has the correct size now.

[@joelitotek1796]

@@madebyjwillis cool cool, I’m putting my kit together now, got it a month and finally had time to down the printer 😅

[@madebyjwillis]

Nice hope it works well for you!

[@gringocatracho]

How much is the kit? It’s not available on Amazon at at this time.

[@madebyjwillis]

We’re out of stock - they’ve been going quick. Should have more in a week or so. It’s $99.99 with Amazon Prime free shipping - you should be able to preorder on Amazon

[@mycinemax2653]

does the bowden tube and cables scratching the top cover?

[@madebyjwillis]

It can - 2 options are to add a cable chain or what I did was just get some cable wrap which has worked well for me

[@DigiorgioAndrea]

Hi! When will this be back available? Is curerntly out of stock on Amazon

[@madebyjwillis]

Should be this week but might be early next week because of the holiday!

[@trancenation]

Where does the foam included in the kit go?

[@madebyjwillis]

On the bottom of the small, rear plexiglass

[@vince.274_]

great channel!!!! you're so underrated !!!

[@madebyjwillis]

Thanks for the support!

[@xXSCARECROW19Xx]

It says it's no longer available when I click the provided Amazon link. Is there anywhere else I can buy it from?

[@madebyjwillis]

We are out of stock - the ship broke down in transit (literally). But the new shipment should be available early this week

[@RaulAccount-b6y]

Looks like the signups for the kit availability are full. Any updates when batch 3 will be available?

[@madebyjwillis]

Some more should check in this week!

[@sirbeck58]

What fans do I need to purchase once I am enclosed? I know I need the main board fan. Can I just purchase the X1C mainboard fan? What about the aux fan, Do I need that?

[@madebyjwillis]

Up to you - we use just the stock fan and the aux fan, be we typically turn off the aux fan

[@tanksmontaje2699]

Is there a version that has enclosure fan add on

[@madebyjwillis]

No - this still works with the accessory fan. I haven’t had any issues printing PLA, which is the only filament I use that would need cooler temperatures rather than warmer

[@madebyjwillis]

Niccccce 👍🏼 appreciate it!

[@karolciezkiewicz3232]

Did it really worked with just PLA? Does it not deformed when over 90 degrees inside?

[@madebyjwillis]

Haven’t had any issues

[@danbabb1594]

Great video and it looks like a nice kit. But I see the kit isn't available on Amazon now. Any plans on making up a new batch to sell?

[@madebyjwillis]

More should be in stock next week!

[@bmor02]

is this kit still available?

[@madebyjwillis]

Yes they are getting sold as they check in but a big order is getting checked into the Amazon warehouse now

[@dkgoodrich8899]

Awesome, really helps me make up my mind on enclosing my p1ps! Thanks for offering the parts!

[@madebyjwillis]

Glad to hear that!

[@Cary_mac]

So a full kit with carbon filters, fans etc is $150 but yours is $100? What’s the catch?

[@madebyjwillis]

Have you priced plexiglass recently?

[@Cary_mac]

@@madebyjwillis last time I purchased it before the mass extinction of realistic pricing it was less than $10 but that price doesn’t help bc it was so far back I don’t recall the size. Maybe about 16x20? Suppose this add on is for initial buyers? I am about to buy a P1 but the local store has p1s for 699 which is only $100 more than the bare p1p

[@madebyjwillis]

@@Cary_mac you do realize that this was posted before a P1S existed and there were no official upgrades available to enclosure the P1P? If you don’t like the price, please purchase something else. Have a nice day.

[@Cary_mac]

@@madebyjwillis I didn’t realize this. I just found bambu printers. Not quite the inviting community to this channel when questioned about a product. Enjoy your time.

[@madebyjwillis]

Thanks for your engaging comments, Mr. Mass Extinction of Realistic Pricing - if you want a warm welcome, don’t insult my pricing (especially when you haven’t done your research on what you’re commenting on). Feel free to start your own business and set your own prices.

[@AndrewAHayes]

Can the test print be dowloaded before purchasing the kit? to make sure I can print the parts accurately, also is there a high-temperature hot end available for the P1P?

[@madebyjwillis]

I believe the test print has been removed to save filament - I will discuss it with the creator. However, you can just “split” the parts to test it if you’d like. Yes - there’s alternative hotends on the Bambu website.

[@AndrewAHayes]

@@madebyjwillis I have my machines calibrated using a diamensional accuracy test so hopefully I wont have any issues, I guess if the first part I print fits ok then the rest should also, I could end up buying the X1 Carbon though, have you printed any high temperature materials on the P1P since fitting The Arc?

[@christianf21]

The kit bought at Etsy brought all the hardware EXCEPT the bearings???

[@madebyjwillis]

That’s not our kit - we only sell on Amazon. This person is selling illegally against the license of the designer.

[@christianf21]

@@madebyjwillis but they are linked from the printables file?

[@christianf21]

I actually got them now, I contacted them and they said were low on stock. Just received it.

[@IchGlaubEsHacktWohl]

I have the ARC now installed (great!) but had now clogging for the 3rd time with PLA - never had problems before. Is the ARC making the interior to warm for PLA?

[@madebyjwillis]

I’ve been printing in PLA with the ARC installed for 2 months now and haven’t had any issues, so it’s probably something else

[@IchGlaubEsHacktWohl]

​@@madebyjwillis Thanks for your quick response, very helpful - the only option left could be the spool holder that something is stuck there and blocking the extruder. Of course I was never in the room when it happend (Murphy) so its hard to tell.

[@madebyjwillis]

@@IchGlaubEsHacktWohl yeah I've seen a few videos on KZbin where a little speck of metal or something gets in the nozzle - I'd try using the tool that's included with the P1P and going through the steps on their Wiki

[@IchGlaubEsHacktWohl]

​@@madebyjwillis Already did that and I could fix it (PLA was broken in the extruder), but it really looks like there is an issue with the nozzle. I now ordered a hardened steel nozzle and also will adjust the spool holder a bit to make sure nothing can be blocked.

[@STRRAYNGE]

quick question. just ordered 2 of the kits. what all is needed from the bambu side of it? can i get away with just the MC fan, or do i need more? Also, is there an opening on the back to install the chamber fan, or is it really not needed? Thanks in advance!

[@madebyjwillis]

Some people buy the cable chain and the MC fan - I haven’t had any issues with mine, and I haven’t done anything other than putting the kit on it. Not sure what you mean about an opening on the back - there’s just a small back panel that covers the opening as shown in the video

[@STRRAYNGE]

basically to install the chamber fan like i have on my X1C. Is there anything like that on the ARC kit? i just dont want to order that fan if i cant even install it.@@madebyjwillis

[@madebyjwillis]

@@STRRAYNGE the chamber fan is compatible but you don’t really need it

[@STRRAYNGE]

ok, i appreciate it. i just didnt see anywhere on the actual printed parts of the enclosure to install it. thank you. ordered 2 of your kits, should be here Tuesday! bambu gave me 2 30% off coupons for the p1s upgrades for my p1p's, but just not in stock, even though they told me to log on on august 10th and order, and i even signed up for notifications, nothing, sold out period. and i of course missed the last batch despite all of my efforts and all they said was, well, wait til the next batch and try again. unfortunately my coupons expire on Sept 30, which just so happens to be the same date their next batch is ready.@@madebyjwillis

[@madebyjwillis]

@@STRRAYNGE nice thanks for the support!

[@maskedmattt]

Is an exhaust fan needed for this? If so are there any you recommend or a resource to help me do that?

[@madebyjwillis]

We’ve been printing without one and haven’t had any issues. The inside gets hot but not extremely hot. There’s been a lot of people printing with this setup, and I haven’t heard of anyone having issues.

[@maskedmattt]

@@madebyjwillis ok thank you, this looks really cool but the fan was the only thing I wasnt sure about

[@jackfranks7160]

What about VOCs ?

[@First.Last.99]

bro, there is some kind of plugin or something which can actually make ur audio sound better. this is not good :)

[@madebyjwillis]

Thanks, really appreciate the feedback!

[@darren990]

don't the PLA warp and melt with the added heat??

[@madebyjwillis]

No - it’s not a perfectly sealed container and even then, the hot plate temp only gets to like 100C or so which is still lower than the melting temperature of PLA. If you’re concerned, print it in PETG

[@christianf21]

It is recommended to print in PETG at least if you will be using an enclosure

[@mikemarucci913]

Just ordered my kit yesterday, how much filament will be needed to print out the panels?

[@madebyjwillis]

It’s right at 1kg! You should be able to do it with 1 roll, but it looks best with an accent color to me

[@mikemarucci913]

@@madebyjwillis yes that’s the plan, I was just going to do the panels with a spool that has about 3/4 left, and the hinges and accessories with another. Would you say just the panels are doable with a 3/4 spool? My p1p hasn’t arrived yet so I haven’t even attempted to slice any of the files yet, I was going to do the whole project on the p1p.

[@madebyjwillis]

Hard to say - the majority of the 1kg is the panels, so it might be cutting it close with 3/4 of a spool

[@mikemarucci913]

@@madebyjwillis Is there some sort of mount file for the hydrometer includer in the kit?

[@madebyjwillis]

www.printables.com/model/293013-magnetic-hygrometer-bracket

[@MichaelThompson77]

This is great can’t wait for the kits to be in stock.

[@madebyjwillis]

Should have some more in 7-10 days! Thanks!!

[@Sanborn32]

@@madebyjwillis still out of stock...