Рет қаралды 2,322
Pilot-Rc 1/8 F-16 Fighting Falcon (Thunderbird) Maiden Flight by Team Pilot Jeremy Solt
Pilot-RC is very pleased to announce the production of what is one of aviations most epic aircraft ever, the General Dynamics F16 Fighting Falcon.
We wanted this one to go above and beyond as a beautiful scale model. We found ways to make it reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well.
This 1/8 scale version has been designed with an improved wing area, to provide better performance and flight characteristics.
Features
Full composite construction, lightweight and strong
Two piece wing and two piece full flying stabiliser, both fully removeable
Painted outside the mold so no seam lines
Easily detachable ventral fins, helps in place with just two screws
Specifications
Wingspan1344 (52.9 in)
Length1810mm (71.3 in) w/ pitot tube
Weight7.85kg (17.8 lb)
Included Hardware
Complete air frame (including fibreglass control horns)Carbon fibre wing-tubesServo extension leadsFixed Dual wall thrust pipe (for 60-100N turbines)Fuel tank (2000ml) and UAT (250ml)Pre-prepared pushrods with ball linksPre-glued control horns
Required Hardware
Engine: 60-100NServos: Total x9
x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder
x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering