How to prevent RAM Cummins 6.7L engine failure due to stock grid heater

Over time, a bolt in the 2007-current stock RAM 6.7L Cummins grid heater deteriorates, falls into the intake runner, and makes its way into cylinder #6. In many cases, it results in total engine failure. Many mechanics either aren't aware of the problem or do not take the engine apart to properly diagnose it. "This is one of the most misdiagnosed Cummins engine issues," says Protech Diesel Center's Brad Hunt. "All too often, mechanics simply replace the engine. Therefore, the problem persists." With the help of Protech in Kamloops, British Columbia, Gale Banks shows the problem close-up and reveals a cost-effective solution.
Early detection of air intake heater failure often begins with a check engine light and P2609 heater circuit code. This should be followed by the "Jiggle Test" to see if the stud and nut in the heater plate are loose. Jiggle Test: • Ram 6.7L Grid Heater B...
Banks Monster-Ram for 2019-current RAM 6.7L
bnks.pw/3mS9ZYn
Banks Monster-Ram for 2013-18 RAM 6.7L
bnks.pw/3uWqNjx
Banks Monster-Ram for 2007.5-12 RAM 6.7L
bnks.pw/3eoXTSP
Protech Diesel Center
709 Tagish St, Kamloops, BC V2H 1B6, Canada
protechdieselcenter.com
[phone]
00:00 Intro
01:48 Bolt failure explained
02:28 Bolt failure example
03:28 Stock intake elbow removal
04:10 Closeup look at broken bolt
05:22 Head removal
05:41 Piston damage
06:53 Bolt wedged in piston
07:02 Look inside cylinder
07:14 The solution
#cummins #ram #diesel

[@mccarterjg]

Here at the utility company I work at we've already lost about 1/4 of our motors to this.

[@james10739]

Well you know what to put on the other 3/4

[@utboilerman]

What was the average mileage on the 1/4 of the fleet that experienced this failure?

[@james10739]

@@utboilerman ya I mean no one wants to spend a couple hundred or thousand more one something you spent like $60 k plus but it is basically a drop in the bucket

[@scottdowney4318]

Pretty awful and know it was planned this way too. I have a 5.9 and no problems

[@carl2591]

.25 of how many? .25% of 5 is a lot, but .25% of 50 is not as bad.

[@Welcometofacsistube]

I'm a true mopar fan boy but manufacturers need to be held accountable for crap like this

[@YourLordMobius]

Class action lawsuits are sometimes quite necessary.

[@james10739]

How long does this take because they said corrosion right I mean if so and obviously it's a known thing it doesn't seem like replacing it or going with the banks solution is any more of a manufacturer thing than a timing belt you have to replace every 100k

[@customconnections2425]

Technically not MOPAR tho, in this particular piece. Cummins should be slapped for this actually

[@fredtflail]

5 year 100k warranty covers that. Maybe get your vehicle looked at when the check engine light comes on instead of driving it until it explodes. I've been. Working for FCA for 9 years. I've never seen that failure I've replaced tons of grid heaters.

[@fredtflail]

@@customconnections2425 is the engine supposed to last until the end of time? That's actually a pretty rare failure. Worked for Chrysler 9 years never had one of those failures in the shop.

[@jasonkeim]

My grid heater bolt came off in the mechanics hand during Monster Ram installation. I was watching as it happened. I was extremely lucky. Don't wait. Change it out .

[@1Peter321]

Should this be replaced on brand new trucks under warranty?

[@qalv97]

@@1Peter321no

[@greygoose4x46]

What year was your truck

[@qalv97]

@@1Peter321 no only when the truck has over 150k miles

[@qalv97]

@@greygoose4x46 2013 to 2018

[@franklindmurphy]

Bought mine yesterday. Waiting for it to come in. Unbelievable that the stock grid heater was even designed that way. Mind Blowing.

[@tonyboneize]

You have any updates on your Cummings from BANKS?? (2019 ram 2500)

[@qalv97]

Does it run better ?

[@robleo69]

Been a Banks follower since 95. Stay healthy Gale and keep'em coming. You are an irreplaceable legend.

[@kayfairlie4458]

No better person on the planet hell yes to Mr. Banks !!

[@jr0079]

He reminds me of Carol Shelby genius legend innovation in automotive. RIP

[@justinmathias2495]

Just got my monster installed yesterday, you can really notice a difference in power. The first one I ordered fedex lost i called up Banks and they had another one sent out immediately. Im a BANKS for life customer. Thanks a million, keep up the good work guys and gals

[@victorperrotta4007]

What do they cost ?

[@qalv97]

Do I need to do a egr delete for banks install?

[@MeriBadger]

7:07 amazing shot, ive never gone for a ride on a piston before 🤩

[@Electro489]

Thank you for this video! This has been a time-bomb for so many Gen-4 Ram/Cummins owners.

[@lg8932]

Some good ole boys from Kamloops, BC helping out Gale Banks to explain this issue, how cool! 😎👊🏻

[@shaolinfist8323]

Incredible that this problem hasn't been acknowledged by RAM and people are still losing engines to it. Good for Gale and his air intake business, not ao much for the unsuspecting customers who had to replace their engines. Goes to show what a master engineer like Gale can come up with

[@jumpoffjoe6572]

I've just purchased a new 23 3500 dually 4x4 maga cab and now have 700 miles on it. This upgrade will be done immediately. I love the power of this 6.7 now, can't wait to feel what this adds.

[@qalv97]

Did you do it ?

[@mlevesque3022]

I had to move in from the 6.7 when the def system failed 3 times in 28k miles. Parts couldn’t be found or ordered for 4 months. Loved the truck, just couldn’t wait

[@qalv97]

What happened to it? Mine has 300k miles and haven’t had problems as much

[@jimkappius9299]

My Cummins experienced this failure 6 months ago at 200k miles. I consider myself lucky that it only bent 2 exhaust valves and imbedded in the top of the piston. Crushed the top ring land so it scuffed the cylinder wall but was able to be honed out. Cylinder head and guides checked out fine. Obviously the Banks grid heater delete and Monster Ram intake went back on so should

[@imatt6566]

Why is this more prone on the 6.7L?

[@djgodden]

Just another reason to rely on Banks. I had the intake installed by Banks a month after it's release. I'm towing a fifth wheel and it's been great.

[@mikeyncali]

Thanks Mr Banks I had a great experience with the sales department Chuck hooked it up and now I have everything y’all make for my Cummins 6.7L I hope it lasts a lot longer now that I am upgrading everything. Now the last thing now will be a upgraded turbo and upgraded 48RFE trans. After all that in to a 52 gallon tank

[@gordie4059]

Banks is always so innovative! Love it

[@01Z06guy]

There are two giant questions this video does not cover: 1) How well does the coil heater work? How cold can ambient temps get before the less effective heater becomes a problem? 2) What is the failure rate of the coil in relation to the grid heater bolt? I see a metal coil that will repeatedly heat and cool for years. If it fails, its going into the intake just as the bolt does. Common sense tells me its MORE likely to fall apart than the factory bolt. Lastly, does a deleted truck have the same risk, or does the delete remove the conditions that cause the corrosion failure in the first place?

[@williamroberts8550]

All I can say is I have it on my truck and I live in New England and it works just as well as the factory grid heater. A regular delete doesn't remove it it's under the intake horn and really blocks air flow. It is definitely worth the money and it's really not that hard to do. I did mine in 5 hours with no leaks or anything

[@alexlindekugel8727]

well id imagine just like glow plugs of old has to be replaced every so often thats just common sense. as far as cold starting if live in cold climate should already have a block heater and winter fuel oil aka #1 deiseal.

[@01Z06guy]

@@alexlindekugel8727 I don't live in a cold climate but I do off grid camping in cold climate at times.

[@sweetpigfarm3645]

I am in MD and HD industry I claim warranty all day long on cleaning the intake it's very common for the grid heater to plug up solid. Have not seen many bolt failures but I see the superiority in Bank's design

[@ronunderwood5771]

Will the Banks part work on an MD/HD vehicle?

[@sweetpigfarm3645]

@@ronunderwood5771 doubt due to positioning of cac tubing

[@imatt6566]

Curious why this sounds like a 6.7L issue, and not also 5.9L?

[@supercuda1950]

Even though I don't have a diesel anything, I find you videos very informative. Also your products seem to be well tested and money smart. I see so many diesel owners pouring out black smoke, while you seem to improve power with less smoke. I have even see "farmers" with their tractors blowing smoke. I can't imagine how much they increase their fuel bill and how much they are harming their engines. Anything to get on KZbin!

[@kevinholman6369]

​@mranonymous3670 good ol KDP. Super easy preventative fix though.

[@edsmachine93]

Great tip. Thanks for sharing. I for one, owning a 6.7 needs to make this change. Thank you Mr.Banks. Take care, EM.

[@imatt6566]

I wondering why this is more prone on the 6.7L?

[@AndrewTa530]

Gale is a true legend!

[@17madracki17]

Hey Gail. I'll get one when I can. For now let's hope that bolt stays put. What a crappy feeling 😂

[@frederickjeremy]

You know i wanted a diesel truck for 20 years before i finally found one I could afford. I told myself for 20 years, i can’t afford that. After buying a 2003 ram 3500 4x4 with 142,000 miles for 16,500$ i learned the hard way that i was right all along i can’t afford it. I descovered the next day while replacing a leaking radiator the used car salesman had most likely filled with stop leak that the truck had been previously wrecked tho tgere was no report of it on any report i found. When i pulled the charge air cooler hoses off i found them full of dirt. The entire intake system had a brown coat of dirt road inside it. I found the culprit was a cracked air cleaner housing surrounded by overspray from the paint job done. Having to leave for my hitch that day and not liking the odds of me murdering a used car salesman whe he inevitably would tell me its my problem I decided to put it back together and take it to work being i had no other means. Freshly married with a kid on the way i needed to get to work. I babied the truck in hopes of making it last until i could save the 4000$ for the parts for me to rebuild it. I made it 12,000 miles before it dropped a valve turning a 4,000$ repair into a 12,000$ repair with me doing the work. While continuing to make 328$ a month payments over the next 3 years and 3 months i spent every waking moment and spare penny in my shop making a computerized truck work with a non computerized 12 valve i had aquired from a buddy who also brought me a 1984 dodge d250 with a gas engine he picked up for 450$ . I put another 300$ into the 1984 and got it road worthy. I used this truck to make parts runs 28 miles into town to eventually get my diesel truck back running a month after i finally paid off the note. For the first time in 3 years i decided i was going fishing, hooked up my boat, got in my newly repaired diesel truck to find the alternator not charging and the ac not working. Probably was a simple problem with the crank sensor bracket I fabricated, or the tone ring i milled into a 12 valve harmonic ballancer, but i was absolutely done with it. Traded it in on my wifes durango for 4500$ I took a screwing getting, owning, and selling that truck, but selling it i vowed that was the last screwing i was taking from a g d diesel truck. Im still driving the 1984 dodge to this day. When the driveline finally does get tired if it doesnt outlive me, i can rebuild or replace for 500$. I have drove that truck almost 10 years and have less than 1000$ in it with no signs of it quitting anytime soon. Diesel trucks are a rich mans game, and i am not a rich man

[@johngonzales1845]

Banks is the BEST in the diesel business...you can take that to the bank!!!

[@ronaldbertin9455]

Gale is the DIESEL GURU , love your videos

[@TonyReilly-mt7uu]

YUP!!! Did my Banks monster ram upgrade about 35.000 miles ago. After seeing this video I ordered it and installed it myself. What a relief!!! The cost was nothing compared to engine failure. Piece of mind, PRICELESS!!!

[@orozcob.l.i1297]

How much was it

[@mccarterjg]

Do not forget to replace the intake air heater solenoid, your different style intake air heater may be able to hold up to The relay continuing to fail but The Mopar intake solenoid is the reason why the Cummins intake manifold heater fails. You could get by with just replacing the solenoid as a preemptive, but I highly recommend doing both the banks ram and the solenoid

[@cookingwithjesus]

Can you expand on the solenoid problem?. What do you look for to fail the solenoid when its still functional

[@scottdowney4318]

@@cookingwithjesus Problem is it sticks ON. Other thing is unless it is cold outside, you dont even need a grid heater. I start my 5.9 Cummins without waiting and it will start right up even very cold outside too. I mean if it is freezing out, it may crank longer.

[@Da9guy1993]

could we just unplug the solenoid so it never runs again? will it give a check engine light?

[@mccarterjg]

@@Da9guy1993 you can unbolt the stud off of the solenoid to the heater and leave the solenoid plugged in otherwise, The ECM will still receive the resistance through the coil thinking it's still hooked up. There is an updated part number for that relay through Dodge. But I also do like the idea of this intake system if I had one of these myself just for that gain of efficiency Make the turbo work less

[@scottdowney4318]

@@Da9guy1993 yes, it will trigger the light. engine will still start if in good condition. It may crank longer if it is really cold outside. What you can do is connect a dummy load to the wires to fool the computer.

[@PorscheRacer14]

Just installed this on my old 2009. New heater coil works great out here in western Canada!

[@Derekfish]

What Temps are you seeing in the winter. I've been contemplating this but heard rumors the glow plug doesn't work that good in -20⁰C nevermind -40⁰C. What's your thoughts ?

[@PorscheRacer14]

I see weeks of minus 40C, sometimes down minus 60C on the prairies. At that point, you have to have the block heater plugged in, battery blankets, strong batteries and so forth. It's always started but takes a bit longer to smooth out versus the grid heater. When it's really cold I'll cycle the key a few times for half a minute to warm as much air as possible if the truck has been sitting a long time. Other than that, it's always started. Never started then stalled and have to try again.

[@surfstarcc1]

Banks makes the best stuff!!!

[@ericb8030]

Have had 100s of 6.7s Cummins come through the shop(not in the dodges), never seen this failure before. Replaced a few for the heating element failing though.

[@hogleg98]

Gale you are an absolute legend. I'm a grease monkey and hope to someday learn a quarter of the things you have forgotten. I'm hoping to get to the point maybe this year to do a pedal monster on my 21 Cummins. Maybe next year do the monster ram. Want to thank you for being who you are. Definitely 1 in a million

[@jamieodom7081]

Thanks for the video and I would love to see you build a Cummins in the shop.

[@ratoncolorado7227]

That seems more like a class action lemon design. Good thing there is a readily available update and improvement.

[@russellmoore6705]

Glad I had banks install this on my Cummins thank you gale banks

[@carpainter2929]

I just can’t believe there hasn’t been a recall on this yet.

[@josemejia6645]

It will more likely become a class action lawsuit when enough people have complained or paid into one. Recalls come about by documented and public complains that force the manufacturer to do something in order to fix their reputation and keep sales going. When consumers do nothing than nothing happens.

[@elijahinky]

Gale is awesome. And Banks is a company you can trust 100%. Need more fellas like him.

[@captainmorgan8854]

All I want to say is Thank God for Mr. Banks, God bless you 🙏❤

[@fredtflail]

The intake flowing higher is great and all but what do you do about the intake log? Removing the heater plate will help but the head casting is what it is. So what can be done about it besides cutting it off and installing a side draft manifold?

[@BradChadley]

Definitely will need to do this at some point. Any word on when the Derringer for '13-'18 Cummins will release?

[@SuperVorpalbunny]

Awesome! Thanks Gayle!!

[@yerwrng]

I read about this a couple months ago when I replaced my grid heater relay .I never knew this was a thing until reading on that relay I immediately went out and wiggled the bolt stud on the heater luckily it's tight but I beleive we will.be going this route for prevention I only use my ram as a toe rig for my crawler I'm not looking lose an engine for a heater bolt ...I've removed everything else on the 6.7 from factory that cuts engine life and turbo life down with EFI live ...no smoke all clean tunes you'd never know it was just a straight pipe from turbo back besides the decibels ...lol

[@josemejia6645]

No smoke? I’d be interested because deleted of emissions on these almost always creates soot which is low hanging fruit for DOT cops an other agencies looking to bust a deleted truck.

[@yerwrng]

@@josemejia6645 The tunes are generic but I don't know who the person is that tuned that batch of csp 5 but they certainly don't over fuel like a lot of trucks I see .

[@Jiggy5166]

how cold can temps get before coil spring heater become ineffective?

[@208flatbedOO]

My grid heater went out in my 2007 6.7 and when they removed it to replace it, that nut on the inside was about broke off! I've seen it first hand! And i got lucky!

[@dennisgt479]

Thanks for the heads up, I have a 2008, guess I will tear into mine and have a close look, maybe just replace the bolts all together.

[@jameseroh6544]

Bought this kit for my wife's 2018 Ram 2500 6.7L. When the kit showed up, the truck was at the dealer for an emissions warranty issue. When it came out from the dealer. My time window to work on the installation was gone. I had a scheduled surgery. And hope that the last day or two of my time off from work. Will allow me to Install this kit along with the iDash. I gotta get my daughter and son-in-law to buy this kit for their 2018 3500 6.7L. A friend's son had the bolt failure. And is out $15k for a dealer repair. Has to drive his old truck to continue to run his business.

[@qalv97]

At how many miles do you think I should change mine to banks I’m at 30k miles right now do I need to tune it after or egr delete too?

[@jameseroh6544]

@qalv97 - Your engine has an 8 year 80,000 mile emissions warranty. Fuel quality is an issue with diesels. I run HOT SHOTS SECRET EDT at every fill up. That helps keep the emissions system clean and allows better fuel economy. Do the Bank's Monster Ram Elbow as soon as possible to preserve your engine.

[@yorkchris10]

I've only seen brass fasteners in the intake tract. My motorcycle swallowed a butterfly bolt, but pretty sure it went through exhaust.

[@jacksonwelch9870]

What is it with Cummins and having bolts/ dowels fall into their engines First was the killer dowel pin in the timing cover now this

[@chrisdavis3642]

Another death pin!! OMG. I'm telling everyone about this. Thank you Banks!!

[@aaronkeiser6349]

It's like the KDP only now it's the KGHB (Killer grid heater bolt). I love Banks man they always have the most well thought out products. I had there turbo setup on my sh*tbox 6.9 idi and it drove me thousands of miles to explore the world with a fully loaded Lance camper on it's back, to work when I was a Marine electrician in Long beach and even drove me away from my crazy family when I needed a F***in break from there crazy. Call me a fan boy but Banks is the best.

[@mikehd3904]

I had 2000 Durango, pre detonation and had a piston look alot like that! Put one in with motor still in vehicle, dropped oil pan and went un from the bottom👍

[@GaryBlankenship96b40]

The first thing i did on my 2022 3500 was install banks horn kit, pedal monster idash and diff cover, and larger intercooler tubes. No after tubes i discovered could not get oil filter out the traditional method. So installed pacbrake oil filter relocation kit. Next is fuel filter kit.

[@Unwedsquirrl]

I’m definitely going to be ordering this from my new truck when it comes in the only question I have is will it avoid the warranty keep up the videos I love watching everyone of them

[@clargay]

Real numbers, before and after installation of the Monster on my Ram 2009, 6.7. Low mileage vehicle in excellent condition. 2500 series. Before install, average 13.5 mpg at 70mph, 3.73 gear. Traveled 3000 miles cross country 6 times in same vehicle. Fuel usage 223 gallons at $5.50/ gallon. Fuel cost per trip $1,222. (Average. Variables apply, obviously) After install. $1000 for Ram Monster Intake. Average mileage 17.5 @70mph. That is 33% savings. Fuel usage 171 gallons. Cost $$940.00. Savings $282.2. Payback in miles is 12,019. Or, looking at savings per gallon, that is like buying $5.50 diesel and paying $3.63 per gallon. I used average. I actually saw mpg go as high as 21.6 on flat roads and speed down at 58mph. However, I eliminated the threat of the heater bolt destroying the engine forever. That threat to me was worth the $1000 I paid for the Monster. Remember the Monster still uses the original EGR and is legal everywhere, including CA. BTW, I had the installation done at a local shop for $450, $100 per hour and 4 1/2 hours. Shop loved the mod and had seen the engine damage previously. They did not know a fix has been available. Truck has much better throttle response and is smoother. It’s going on my new 2021 Ram 3500 when warranty runs out. Maybe sooner! For real, not made up.

[@renaissanceman8564]

Gale Banks,, still THE MAN .

[@marlonhernandez706]

I already did that upgrade in addition to the cold air intake and boos tubes. Seeing a difference in over 4mpg while towing.

[@marlonhernandez706]

@@Motleymick is a 2021 ram 3500 dually. It has the aisin transmission and I have the 4:10 gears

[@mungfam]

@@marlonhernandez706 so I get up to bc periodically. I have 2020 and a 2022. How much is this all going to cost me? 😂

[@emeltea33]

Wow, that's good. What about regular driving (not towing)?

[@davelariviere682]

PROTECT! Thanks Guys!!

[@TheIdaho69442]

This video just made me buy a Monster Ram intake.

[@jopete681]

Love your channel!!

[@jeffreyrogerkelly3751]

Thanks for sharing

[@johnwall713]

I love the idea. Looks great. Banks has done it again. That being said, I've been a diesel tech for cummins for 6 years and I have never seen this happen. Wondering if it's the extreme cold climate in the west. (Southern Ontario guy here)

[@cookingwithjesus]

Plenty in Alberta where it hits -35 for 3 week stretches. The heater cycles for a good long time after cold start. probably close to 10 minutes sometimes.

[@fabricatorgeneralcaz534]

I’m in the Southeastern U.S., is this something I need to be concerned about immediately? 2012 Dodge dually with 122k miles

[@kevinkeener2058]

This happened to me 2x in Alaska. Both times were in the winter. The only reason it’s not a recall is because it doesn’t happen in the lower 48 where it’s warmer.

[@fredtflail]

My guess is the owners are driving g with the check engine light on for months. I've replace tons of grid heaters under warranty and customer pay seen the. Melted but never to the point the bolt was about to fall out. It happens because the shitty grid heater relay which is just like a Starter relay on a 50-90s Ford and it melts inside and sticks.

[@tryduck6993]

@@fabricatorgeneralcaz534 I would be pulling and checking it at the very least!

[@agoodneighborautorepair2176]

wow very nice improvement

[@Dieselmd2008]

Awesome stuff took me only 8 months for my to finally arrive

[@scottieg539]

Got one sitting in the garage, await to be put on, but I’d really like to know when we are getting the derringer and exhaust….

[@johnmagruder6292]

Should there be a recall,or class action Lawsuit?

[@robertjury6745]

What was the mileage at the time of bolt failure?

[@blackmarketinnovationdesig3186]

Banks needs to stop advertising this as "50 state emissions compliant". As of right now 2007.5-2012 is not emissions compliant in California, and has been shown as "pending" . I have this setup, and it's a very nice improvement, but have yet to pass California emissions, due to there not being a CARB EO number for 2007.5-2012 6.7l Cummins. Great well engineered product, if you don't live in CA, or "know someone" in the smog business that doesn't worry about visual inspection.

[@ManitowocMan999]

Can the new heater coil rust/corrode and fall into the intake causing the same problem?

[@mattradford3505]

is there a factory recall for this bolt issue?

[@jeffsikula2920]

My diesel shop ran into that same problem on someone's truck and just dug the bolt out of the piston and shaved .006 off the head put it back together and it was good to go.

[@ronunderwood5771]

Does this happen on the medium duty truck and school bus 6.7’s?

[@Garth2011]

Wow, that bolt fatigue design should generate a lot of Monster RAM intake sales just because !

[@trentt559]

I swear Amazon had this product for around $500 like 7 months ago, are they cashing in on loyal fans and new members like myself?

[@drewmurray2583]

I need to get in touch with these guys. I live a couple hours away and looking for a complete fuel system for a 2007 6.7 3500. Had water in the tank, truck sat afterwards and rusted the high pressure pump, lines, rail, and injectors! looks like aluminum powder and pepper flakes mixed with fuel :-(

[@jamesjohnson6194]

I've got an '18 6.7HO/Aisen 3500; I keep it garaged in a heated shed; is there a correlation between cold weather use causing condensation damage on the standard setup?

[@petercorselli7974]

Does this also happen on the 4.5 liter Cummins (the four cylinder version of the 6.7)?

[@marvinr5054]

I have a 2013 6.7 will I need to do any tuning with this upgrade or it it a direct bolt on and go?

[@CaliLifeTCG]

Amazing I can’t wait to own my 3500 I got a 1500 rn half way through paying it off

[@rw1377]

Are we EVER going to see the Derringer for the newer Rams?

[@Mountain-Man-3000]

The modern day Killer Dowel Pin.

[@peterpeter5666]

been a tech for 38 years, and back in the day most diesel engines were bulletproof if you took care of them , things like this make me wonder how they were designed in the first place and how OVER engineered everything is getting

[@utboilerman]

How many miles on average do these grid heater bolts fail?

[@upnorthyooper1196]

So how many miles on the truck? That heating element doesn't look like it is going to do near as good of a job as the stock one. At 20 below F, could that cause other problems?

[@Relder642]

I have installed a Monster Ram in my 6.7L 2008 Ram, mine didnt come with a coil heater, is it possible to order one of these seperatly?

[@Stubby0266]

Thank you for this information. Order placed and will just have to explain to the "boss" why this purchase was important. Pay little now or alot later.

[@gadsdenconsulting7126]

Just don't tell her a stainless steel bolt to replace the original will also solve the problem! 😂

[@stevepearson6316]

If I did an EGR delete would that save that bolt from corroding on the heater grid. And is that heater grid the thing that causes a huge voltage draw when engine is could like when it's just started and does that grid thing cycle on and of for a short time until engine kinda worms up

[@timothywhitlock8349]

thanks great video

[@russellkeast8993]

Will that intake horn and grid heater void my warranty on my 22 3500?

[@RedBeardDetails]

Can you delete the solenoid after this or while doing this?

[@doug2202]

What years do they use the grid style heater

[@tryfourlo2840]

Ouch. Makes you wonder if oem’s are designing bad on purpose. Hot rodding saves the day again👍👍

[@calvinnewberry5915]

What years are effected with this defect?

[@brianfreland9065]

im a new ram 1500 owner and just picked up my truck 3 days ago....any recommends for must upgrades other than running boards, bed covers, and wheels/tires? id like to customize and personalize it but im not sure where to start. its the v6 vortec engine and i upgraded from a stock ford ranger that i ran for years and years and years haha so this is quite a big upgrade for me and i love it so far

[@Mr.WS6]

What's the intake heater do/used for?

[@goat3898]

Not talking crap I work for Chrysler have for 16 years and yet to have seen this failure. But it is interesting to see that. Almost seems like it would be a recall as it can cause you to loose power and cause an accident as the recall notice says.

[@MidnightSlidersDrift]

I have a 2019 ram 3500 6.7 cummins engine do I need to worry about this problem? Or is it only for earlier models?

[@fordcook4259]

how does the banks intake heater compare to the factory one . Face -35 celcius here regularly

[@neckofthewoods24]

That coils very thin though. With heat cycles could get very weak and break off. What’s to stop it?

[@stevendarveau2090]

I like that truck behind you sir lol. Looks awesome and id deff drive that lol

[@mitchmatronic7665]

Does the emissions delete stop this from happening?

[@KarasCyborg]

Why isnt there a recall on that ? Or does it usually fail long after the 100k / 5 year powertrain warranty?

[@patrickwendling6759]

Thank you for your knowledge and videos USA 🇺🇸 USA 🇺🇸

[@tojiroh]

Gale Banks was the man who taught me to cuss whenever I see a Diesel belching black smoke. "Bad goddamn tuning."

[@Garth2011]

Yes siree and at the same time...theres a ton of experts screaming back at us saying "thats how you make them run harder". Those people are the same ones who blow up their engines at some point. I am amazed with the number of "experts" who ignore an overly rich fuel mixture and say they know what they are doing.

[@kustomaf7606]

A STOCK truck would roll coal without the DPF.

[@dougn6465]

@@Garth2011 been “rolling coal” for 500k miles. When is it going to blow up?? U realize older diesels don’t have advanced computers and injection systems? Can’t “tune out” pre spool

[@dougn6465]

Btw the way, my 3rd gen rolls coal with a full banks kit, no other mods 🤦‍♂️🤷🏻‍♂️

[@Garth2011]

@@dougn6465 Still, its poorly mixed fuel and air. No benefits yielded with black unburned soot.