Banshees in the Glamis dunes

These bikes ran great on this trip. The 4mil needs pipes that will let it rev out. The old Toomeys just wont let it rev. The burn on the plugs was perfect with both bikes if not slightly rich on the 4mil. The sound from the GoPro isn't the best quality in the edit as the bikes go by at WOT.

[@itsmigz5593]

That teal bike was screaming!!! I got T5 pipes on my banshee I’m located in North County San Diego, I’m gonna have to take my banshee too you for work for sure real soon 👌🏻 I want my bike to scream like that

[@jamesk7446]

The 4mil definitely is breaking up a bit on mid range. Seems like it's a bit lean on the top too. The teal one is spot on.

[@herrjugsracing7816]

@@DuneRiderLife You both are wrong but you cant tell by listening.

[@DuneRiderLife]

@@herrjugsracing7816 Dang that was 2 years ago. Did you finally figure out what was wrong?

[@herrjugsracing7816]

🤣 I'm old and slow, it takes me awhile.

[@chriscallas9358]

Both sound great, cool video.

[@rpcraighead]

Gotta get out there with you and one of my kid's bikes. About time I started blowing up HIS stuff! ;-)

[@herrjugsracing7816]

Payback is a bitch!

[@Eric_661]

The teal one runs good

[@herrjugsracing7816]

That one had better pipes (T5) so it could rpm with the port it has.

[@ShortkillaProductions]

Bike sounds great! Would like to see more videos like this🤙🏼

[@herrjugsracing7816]

Thanks! Will do!

[@charliepapa5835]

Awesome! Keep the videos coming!

[@herrjugsracing7816]

I'm trying.....

[@hoffmiermp]

The perfect bike would be a banshee engine in a TRX 250R frame imo.

[@sethanderson9931]

Awesome video

[@BurritoBoyzz]

dope video boss

[@GavinBose]

Love these vids pls do more

[@sethanderson9931]

Cool

[@626weekendwarriors9]

Good stuff

[@user-mf1em3iy2f]

Great video. Can you show your setup with your truck how you extended the bed to roll two quads straight in. What bed extender your using ect...Great idea!!

[@herrjugsracing7816]

I believe that one is called The Hitch Hand.

[@user-mf1em3iy2f]

@@herrjugsracing7816 so just plywood on top?. Does the truck handle ok? Have you got your hands on a CEO 250r cylinder yet?

[@hermanmuenster1405]

Could be many different issues such as rider weight, throttle position always keeping it pinned to redline in too low of a gear, oil mix ratio, thermostat fail, plugged radiator fins

[@infamos100]

Dam that thing sounds so nice I hope yo own a banshee one day 👍🏻

[@herrjugsracing7816]

Not sure I will ever own one again.

[@sethanderson9931]

@@herrjugsracing7816why not?

[@herrjugsracing7816]

@@sethanderson9931 No time to ride and I'm older and it hurts now.

[@sethanderson9931]

@@herrjugsracing7816 are you thinking about retiring?

[@herrjugsracing7816]

@@sethanderson9931 I'm always thinking about retiring.

[@jaredpauletto7687]

What is your camera mount setup? I love how it swivels during the ride.

[@herrjugsracing7816]

That is the GoPro Max in 360 view. It is a great camera to edit that kind of stuff.

[@alexman51]

Bit late but change the 7 paddle to a 6 paddle on the first bike and the ext swing arm isn’t rlly needed for that setup

[@goldenwheeledbanshee9160]

Both are killer, nice Banshee's I see nothing wrong with neither.

[@herrjugsracing7816]

Not at this time anyway.

[@noinstaphil]

How do you like the DMC's? Do you have a lot of experience porting cylinders for those pipes?

[@herrjugsracing7816]

Yes, they are good pipes.

[@sethanderson9931]

How much power should the banshees in the video be making?

[@herrjugsracing7816]

Hmmmm... 4mil stock carbs would be 70hp as that is the limit of stock carbs. A 4mil on race gas with in frame pipes make low 80s with my porting and setup.

[@sethanderson9931]

@@herrjugsracing7816 how much hp can you get out of a 350cc motor on race gas?

[@alexman51]

Or change the paddles on the for mill put them in the first bike and swap em and the swing arm

[@bigbudlover7930]

Did they keep them running? Any idea what they did wrong?

[@herrjugsracing7816]

One had a bad head and I believe the other one might have been owner error.

[@micho2062]

I got a 96 banshee I need worked on... needs a clutch and bogs out in 2nd gear... it's on a fresh rebuild, can I drop it off.? What's your price range for labor.?

[@herrjugsracing7816]

Yes, contact me [e-mail]

[@alexman51]

It’s too rich low and too lean too change Jets out on that 4 mill what what gearing do you have and it sounds like the 4 mill might be spinning do to lack of paddle ??? How’s it feel

[@herrjugsracing7816]

Its the pipes, change them out and away it goes.

[@aaasuperiorslidingdoorrepa8273]

Awesome video those banshees are running really well Where are you located and how do I get your phone number I’ve got a built banshee that I need some stuff done to it I think my ignition is going bad it’s a PVL… Let me know where you’re located and or how do I can get your phone number thank you

[@herrjugsracing7816]

San Diego herrjugsracing.com

[@Mohammedbanshee350]

✌️✌️✌️✌️🔥🔥🔥🔥🔥🔥🔥🔥👍👍👍👍👍👍

[@ElFather024]

Awsome, looking to port my cilinders👍👍

[@herrjugsracing7816]

Do it!

[@ElFather024]

@@herrjugsracing7816 can you do that Port job for me,let me know cost and shipping info, thanks

[@luisv9131]

Is pismo open

[@herrjugsracing7816]

It was the last time I was in town. I don't think it will be around for long.

[@ronniewilliz153]

lol the owners must like lean an mean. I doubt it was parts failure.

[@slayerchemicalwarfare6516]

Huh ... u ride funny.

[@chem6269]

it might need a bigger main jet with you on it? haha

[@herrjugsracing7816]

I tried my hardest to overheat them. I constantly revved them out with multiple laps.