Barber HACK: How to HACK your clippers to SHRED thru any guideline

[@barberjungle]

The fast feed fully zero gapped flush does not cut clients skin with the orginal fast feed blade. I had mine gapped flush but not overlapping and will take the trimmer line out pretty good. Never once did it cut anybody. The corded seniors will snag if too close , haven't tried the Babyliss fully gapped. I also has blade set like this by accident once with my masters. It faded flawlessly and you get a combination of a more closer blade on one side and then being able to use a full #1 when fully open on the other side of the blade. It works great in my experience. I also had zero gapped even blades but it just a matter of choice. But that uneven blade blends very smooth if you know how to blend with it. Trust me

[@yanntraore5319]

This almost happened to me I dropped my trimmer and the holding blade broke. Thank god I checked before lining my client up I would have seriously injured him. Great advice always check your blade if you drop your tools

[@-ZED1]

The alphas with the fusion blade knock out the bottom line effortlessly 🔥

[@pickleforknwiggles634]

Any decent clipper knocks the line out if they are zero gapped. It's too easy. Thank God Barber school takes so long and is so expensive. I do like the Gamma Ergo...nice and quiet. I admire the creativity here though. Blurry lil fade dog.

[@laylow91cabrera94]

@@pickleforknwiggles634 lame 😒

[@pickleforknwiggles634]

@@laylow91cabrera94 Ya my bad. That was a dick statement. I wish everyone success in this business. The extended school hours do keep many people out that are not serious however.

[@laylow91cabrera94]

@@pickleforknwiggles634 you right

[@robrealcuts]

Lowkey need to try this tomarrow. But I just hate the babyliss clipper lol. But I use my magic clips to get all my skin lines and then take every single line out. I almost never gotta go back with the trimmer

[@raymondiogoingssr.4716]

Sometimes your clippers will do this on its own... But I do understand what you're saying Ken...

[@isaiahespinoza23]

I like how you always go back to detailing, instead of like the rest of these barbers who blend, but don’t detail a lil more.

[@bishopbhmg3882]

This gets you in the habit of using the corner of the blade

[@raymondiogoingssr.4716]

That's how one should fade anyways 😉

[@raymondiogoingssr.4716]

Your blends comes out way more better than always using the full blade in my most humble opinion...

[@batlas1354]

I did this on accident and it works well

[@Peralta]

That same thing happened to my last pair of standard clippers. They fell on one side, and it was some how cut sharper on one side. I was looking for this exact kind of video to try and get my new set of clips to cut like that. Thank you fam

[@ADChopz]

Yo bro can you make a video explaining the reason to have multiple clippers and what do use them for ? An example my teacher tells me to have atleast 3-4 clippers by the time i finish school for different things, and to have 4-5 trimmers for different purposes and idk what he means by that. My list so far: Magic clips (close to being 0 gapped) - for blending tapers and detail work Babyliss Black fx (regular/ how they came in the box) - for setting guidelines and for blending fades Got some stylecraft mythics coming tommorow 😁😁😁 Trimmers Babyliss chameleon fx (0 gapped) Babyliss silver fx (close to being 0 gapped not all the way tho Kiss by red CT11 (not 0 gapped) Why should i have one zero gapped and one not zero gapped

[@562daniel]

Reason for multiples is incase one dies or dosent get rid of a guideline or just breaks

[@MD_-ub8rx]

For trimmers u need a deep tooth one (debulking) and fine tooth (line ups). For clippers u need a debulking one (high power) and a fading one

[@sirmichaeljones8354]

the fadify 2.0 comes with 2 detachable blades already made this way and it's 🔥

[@Ericsculptsprecise]

I’m debating if I should do this but skeptical because I nave a heavy hand

[@charlesc4709]

This isn’t necessary. All u have to do is zero gab ur clippers. I need all my blades even.

[@gotnitro4329]

This is something he talks about in another video. If you don’t like it just don’t do it

[@dmiller6134]

I know barbers that have been cutting for 20+ years and they dont zero gap any of their clippers or trimmers it isnt always necessary if so they would sell them zero gapped

[@gotnitro4329]

@@dmiller6134 I’ve been cutting my hair for a couple months and I can agree it’s not necessary. I have one pair of clippers zero gapped and one not. It only makes sense to zero gap your clippers to take that bottom skin line out. But I did notice that I can’t move the lever all the way closed on my zero gapped clippers without cutting into my guards. That being said I only fade with my non zero gapped and use the zero gapped clippers for bottom line.

[@user-sg2bp5vh7e]

@@gotnitro4329 u zero gapped them wrong lol

[@gotnitro4329]

@@user-sg2bp5vh7e lol ok

[@illestproductions2589]

did the same thing on accident with my babyliss too and left it ever since

[@conflictdiamondz]

damn and i thought that the Trimmer that i just Bought weren't aligned correctly by Engineering Fault. that's why they was 50 Bux on Ebay lol This makes abit of Sence Now. Ty

[@jay871212002]

Yo, will this work with wahl seniors???

[@professionaljeromehaircuts6606]

Wow the best hair cut that amazing 👏 😍 👌 🙌

[@wavykidkev]

my guy🤝

[@tanmichaelanthony4675]

It might damage the clipper blade it was not designed to use it like that

[@jessie2_savage]

Why is my cutting blade in my trimmers keep shifting 😢

[@the_original_Versastyles]

This I guess you can call angular gapping. But you can do something called 45 degree to 45degeee with a pull up with your fingers on the area you are trying to lighten up. I see that your style already does 45/45 so just the thumb over the area And it's gone.

[@eloycadriel9432]

When you do this you screw up the lever movements ..

[@ZxidxC]

Ken where ya cop your white tees from

[@the4thken]

H&M

[@stefanogawrysiak8424]

If you don't put a line in you don't have to take a line out FYI

[@ChhaimVeBol]

Hello barber thank you for Vedio

[@desmondmitchell5602]

been doing this

[@collyateoo7766]

Brilliant fade ma8

[@yarimarcyari8660]

🔥🔥🔥🔥

[@LivingUpstate]

Brother. You were supposed to set the primary line with a trimmer cause that's what you stated. That this hack would even take out a trimmer line. 🙆🤦

[@orlandoc661]

Interesting

[@marlonlindsey8054]

👀? However he did them clippers…it worked! That 💩 was 🔥🔥🔥! I cut my own and my babylis cut like that by default. I lost a screw and that 💩work just like he saying

[@kaylencartwright426]

To all the barbers out here I highly recommend not to listen to this garbage lol

[@Nbayungjin]

🤣🤣

[@gabbycarruth]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@VLOGSbyEP]

If y’all took y’all time to write out how this vid doesn’t make since or how this vid doesnt make sense or it’s just stupid and doesnt make since then you obviously aren’t a good barber

[@yarimarcyari8660]

🤨👏🏼👏🏼👏🏼👏🏼

[@bobbystillz222]

Nothing nothing but just makes no sense. You don’t have to make it uneven. All you have to do is open the notch if you want the hair to be a little bit longer. Instead of doing the right side and the left side of the blade. Close the blade to take out the line. And then open it you’ll get the same length it’s on the other side of the blade. Very strange

[@NoBullsh_t]

So how much of the fade do u do with these clippers???