BARE METAL EVE-NG ON APPLE SILICON!

[@hg2305]

I just found, watched, and followed your another video. That works! Awesome and Big Thanks!!!

[@DheerajVerma143]

new iso not working, can you provide old iso please ? and how to add more disk space ?

[@nguyenhoangduy9987]

Thank you and can you guide me how to integrate iTerm (or telnet) into eve-ng?

[@ashkamb0]

how to add router image and palo alto image in EVE-NG in macbook M1. Please help

[@WaheSec]

The process of adding any image is listed on the eve ng website. You can refer the documentation on their website.

[@seanlowe5547]

Thanks. Im gonna try the Cisco Routers and SW on my m1

[@cm3362]

the last version it is not compatible can you share your ISO thanks

[@eduvidio]

i tried with the recent file iso provided in the site but failed, can you help me using the newest file

[@paranveerkumar9557]

getting error on macbook m1 arm cpu with latest eve-ng version. Would you please share your iso file ?

[@adrianceasar5620]

can you use all CISCO ,Juniper F5 image on this ARM Cpu ?

[@harunaadoga]

Thanks for this @iHarshraj. It works!

[@jesusaguilar2012]

I'm not able to add Images, I follow the eve-ng web page documentation, I did in windows and it worked, but not in mac M1, any sugestion?

[@WaheSec]

What error you get when you try to upload images?

[@ParanveerKumar]

the latest eve-ng iso is not working on macbook m1 for me. Did anyone followed the steps and is it working for them ? I am trying to find the solution from several months but it is not working.

[@joshuafernando291]

Thank you sir for ur video. its work for me, but how can add nodes other? only Virtual PC (VPCS) can i add, another i cant add. hope u reply this. thank u sir!

[@WaheSec]

I will publish video on adding images in eve-ng

[@ranjanadissanayaka5390]

hey thanks for making this video..

[@ovI0i17Hpl]

Keep getting a “can’t open blockdev” error, any possible way around this or another way to install.

[@hg2305]

Nice video, 1st I tried bare install onto my mac mini but gets log-in without ip and the login didn't work. Tried many but same and forced me to reinstall macos couple times then retry. same output. Then I found your video, and tried UTM following your video. But same output, no ip no login. On the other machin which is 16 yrs old! I found I didn't dump, I was able to replace windows vista with eve-ng successfully. Except speed , it works well. So back to mac, what might be the reason for no ip and login failure?

[@مهد]

had the same issue: first you need to finish installation completely along with downloading step to finish Second, when it reboots, wait for it since it will continue downloading/unpacking and installing stuff Third, it will reboot multiple times by itself. Forth, you might need to reboot it one final time to get the IP. If not, you must capture the IP it got while installation process and HTTP to it and you will be able to use eve-ng

[@mainetworking]

I am getting unknown error in UTM whenever rebooted at final stage

[@ronnysalazar6166]

You have a video of installation of GNS3?

[@WaheSec]

I’m making that video and will post within 3 days. Be Keep in touch

[@ALIBAGHERIE]

is there any diffrrentness between needed ram on apple or windows version of eve-ng?

[@WaheSec]

That's the same on both

[@mainetworking]

how can I add ova file in utm, please help

[@kajupu2275]

Thanks for the video! I have implemented the same, but the network address is not showing up. What should be the network settings for the UTM? What is the network mode?

[@thanhnguyentran7826]

me too !

[@WaheSec]

Network Mode is Bridged Advanced , bridged interface is default i.e. en0 and Emulated network card is intel gigabit ethernet (e1000). Hope this info helps you

[@kajupu2275]

@@WaheSec Thanks for the reply! I tried with the same configuration but could not get an IPv4 address. I believe the problem is with systemctl status networking.service. I will write back if there is any progress. Thank you very much.

[@WaheSec]

@@kajupu2275 welcome, I hope this problem solves, what you can try is to change the network because sometimes utm is not able to fetch ip. In my case i was not able to get ip on my wifi but when I switched to mobile hotspot utm was able to fetch ip from dhcp. If this doesn’t help then I would recommend you to check network service of linux machine.

[@kajupu2275]

@@WaheSec We were able to solve the problem. I can use EVE-NG on my M1Mac. I had to solve a lot of things to solve the problem. DHCPv4 address is not enabled. 　⇛Fixed IP address assignment I can't log in as root/eve. 　⇛Enabling root password in Ubuntu recovery mode. Problem that the initial setup screen of EVE-NG is not displayed. ⇛. Execution of /eve-setup There are still a few problems. I am reporting this because I confirmed that the Apache server can start and display HTML. Thank you all.

[@swapnillohar334]

I am trying to install 5.0.1-19 version. but unable to install it

[@denismarroquin4984]

thanks for the video! Can you share the ISO file you installed on the video, The one I download from the EVE-NG page isn't working.

[@mohamedslimhamouda9324]

Yes, with the new version of the iso we don't encounter the same screens. Also even when we reach the end of the installation, the default password does not work.

[@WaheSec]

As there is some problem in the ISO. I have figured out a way to run latest eve-ng without login credential problem. I will upload video which contains the solution.

[@WaheSec]

@@mohamedslimhamouda9324 Please refer this video - kzbin.info/www/bejne/kJvUnnmQaLqjask

[@mohamedslimhamouda9324]

@@WaheSec Yes ! it works ! Great Work on your part, thank you

[@tjdwls0777]

Hello! before download processing of this video, some needed condition setting? ex)like vmware,ubuntu

[@WaheSec]

I not getting your question.

[@tjdwls0777]

@@WaheSec Oh sorry for misunderstanding, i request that i will use eve-ng by m1 mac(basic m1 chip,16GB) on utm for network study, this condition smoothly activate? or need exterior server for activating eve-ng?

[@WaheSec]

@@tjdwls0777 if your network is small with few routers and switches then utm is fine, otherwise you’ll need x64 hosted external server. I recommend x64 server for fast performance as M1 is doing emulation.

[@felixtejada9964]

Is your computer a macbook air? What are your mac's specs?

[@WaheSec]

M1 MacBook Pro 8GB 512 SSD

[@hera8247]

Unfortunately it doesn't come up like this one my Mac is there another way that I can run eve-ng on mac m1 ?

[@WaheSec]

Qemu and UTM is the only way right now.

[@hillagoon3073]

Can it run with cisco ios?

[@hg2305]

Well, not quite. Still getting errors - "Guest has not initialized the display (yet)" - on windows vm on eve-ng. Any idea?

[@مهد]

had the same issue on linux image on eve-ng.. I guess eve-ng will not support nested virtualisation? still trying other stuff. If you reach anything let me know. thanks

[@neeko5688]

i have the same error

[@lagecytonextgennetworking72]

from where I can get old ISO and it in last moment after installing eve-ng "Display output is not active"

[@WaheSec]

You can use new iso file v5. It is working

[@jjjjjjjjjjjj4751]

GNS3 or EVE-Ng on m1 laptop which one is faster, or both equal slow due to emulation?

[@WaheSec]

Both are using same emulation engine that is QEMU. so there is not much difference of speed.

[@ushkilbaynurlan5583]

Thank you, you're a good man.

[@WaheSec]

Welcome!

[@sukhrajmaencar5583]

Hello … I tried to install event on my MacBook Pro M1 max .using UTM but can’t get the password correct for some reason tried root/eve but it’s not working

[@WaheSec]

As there is some problem in the ISO. I have figured out a way to run latest eve-ng without login credential problem. I will upload video which contains the solution.

[@sukhrajmaencar5583]

@@WaheSec - VMDK step is working fine .. I have even added the nodes (Cisco ,juniper,fortigate ) but for some reason when I try to open the console to the device it’s open in Terminal app and throughs an error.

[@nbctcp3450]

@@sukhrajmaencar5583 I believe it looking for telnet in /usr/bin while actual telnet located in /usr/local/bin I dunno where to change eve default telnet PATH

[@ahammadalmasud5287]

Thank You for your share. That's really great.

[@WaheSec]

Thanks and stay tuned for more content👍

[@Hamza-Bit-Lab]

Hello! I am trying to install eve-ng using the UTM, but the installation wont finish, stuck in reboot. Any help?

[@WaheSec]

Did you followed my steps or you did it on your own, if so Please explain me your installation steps.

[@jordanleron4456]

@@WaheSec hi, same here. I followed your steps but stuck in reboot. user: root and pw: eve didn't accept

[@WaheSec]

Actually the latest version of eve is not accepting default user and password. It maybe a bug. Even it’s not working on my end as well

[@EdnardoDamasceno]

@@WaheSec vc poderia disponibilizar a ISO que vc usou no vídeo?

[@CCCC-ve9lr]

can you run csr1000v on eve-ng? is it faster

[@harshrajsingh3588]

CSR1000v requires more cpu power and ram so it will be barely usable.

[@CCCC-ve9lr]

@@harshrajsingh3588 thanks, I think I should keep using my intel-based mac🤣

[@jordanleron4456]

Hi, how can I add cisco ios images?

[@WaheSec]

You can follow guide on how to add images in eve-ng from the official website of eve-ng

[@pradipto4449]

hi, can you help me to install?

[@WaheSec]

What help?

[@pradipto4449]

@@WaheSec bro i can’t install on macbook air M1, request your help… pls share your mail id

[@mohamedkamal3514]

Thanks for great video i did everything and eve-ng is working now but Cisco VIOS and VIOSL2 are not accessible via SSH I can SSH IOL with no problem but anything via qemu not accessible So could you please help me

[@lagecytonextgennetworking72]

I am facing some issues can someone help me to comfigure this

[@WaheSec]

What issues are you facing?

[@pratiekpatil]

is the UTM you are using paid product?

[@WaheSec]

It’s Free!

[@udithnarayana1331]

Bro, can you share ISO file in drive so that we can use

[@franciscoantoniomoralesher2934]

Thanks for the video. I'm using the latest version of eve-ng, and followed all your steps, but when I'm trying to install eve-ng, the next message is shown: Could not read the boot disk. No bootable device. I clear the CD/DVD option but the result is the same. I'd like to try with the version you are using but I cannot find it. Any help...?

[@WaheSec]

Try to check drives in vm settings. Make sure that they are IDE, next you can try to reinstall utm

[@ParanveerKumar]

the drives are IDE only but getting same issue@@WaheSec

[@diegoneryfarani288]

Follow your step by step, but I stopped at the login and password part. Message: login incorrect. I used the default user "login: root" "Password: eve". Would you help me?

[@WaheSec]

Please refer to my latest video.

[@MrHawk407]

Hi bro.. I am a netsec engineer..I can't afford mac book with m1 chip.. can u pls suggest me a affordable laptop for Eve ng

[@WaheSec]

A laptop with 16gb ram and 4 cores intel processor would be fine.

[@MrHawk407]

Thanks bro..

[@alexlopezv]

not working for me

[@DheerajVerma143]

thanks

[@ubiratanpassos6855]

Disable UEFI Boot safe my day!

[@priyanshuz]

This is not bare metal

[@ken-px9qb]

for some reason when I enter root/eve as the username and password. It gives me login in-correct. Please advise

[@مهد]

had the same issue: first you need to finish installation completely along with downloading step to finish Second, when it reboots, wait for it since it will continue downloading/unpacking and installing stuff Third, it will reboot multiple times by itself. Forth, you might need to reboot it one final time to get the IP. If not, you must capture the IP it got while installation process and HTTP to it and you will be able to use eve-ng