Barn Find Adventure - Antique TV - Will It Work?

Will this old TV come to life? Join me in this adventure to put a picture on it's screen again!
To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: / mrcarlsonslab
#restoration #electronics #repair

[@MrCarlsonsLab]

To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: www.patreon.com/MrCarlsonsLab

[@killerdeamonking]

Hello Mr.Carlson , i have a rather odd question for you. I have been working on a classic car for a few years now and am in a little pickle here, I want to convert my incandescent Dash lights over to LED but all the LED bulb designs are subpar in terms on how they throw the light out into the cluster area. The way my cluster is setup it seems to be a reflector type setup where the cluster faces are solid and the light you see is shined through a gap between the glass and the dial face. I have been thinking about getting a set of 5mm LED's to make my own Bulbs ( I have not checked the Incandescent bulb sizes yet in MM as there are 2 different size bulbs ) , im wondering how one would drive 8 Bulbs from a circuit board with wires to each bulb. Now my main question is , do you think its possible to control the led's brightness based on the original Dimmer switch on the car as i don't want to start modifying any of the original wiring. The dimmer switch would be done by variable Voltage controlling. I haven't decided if its easier to use 5mm bulbs or using the little rectangle leds , Reason being is i am almost tempted to try changing which bulbs illuminate should i do a 3 color setup where i can push a button or switch a selector switch under the dash to go from something like Green , Warm white and white as the colors. Is there away to do a variable resistor type setup on a circuit board to achieve brightness controlling based on the rheostat input voltage to the board? I don't like the idea that normal socket type leds burn out because they are over bright due to incorrect internal resistors. I would rather have a traditional LED that dims naturally as it goes away but also dim able by me but replaceable just as easily. Thanks , ZD

[@only257]

Agreed 📺😊

[@MrPatdeeee]

Dear Carlson you have caused tears of nostalgia in me now. IE: I was a TV technician for 45 yrs. 33 with RCA Service Co. And I was an instructor at RCA's colleges; for a long time. Thus, what you did is what I have done untold times. Wow! Thank you kind Sir for doing this.

[@danieldoss1987]

I just want to personally thank you sir for fixing the horizonal hold on the televisions of my childhood. Always seemed like the horizontal hold was the first to go.

[@MrPatdeeee]

@@danieldoss1987 Dear person, did you not mean your reply to be for Carlson?

[@bradbeasley7669]

cool beans good sir spent many a moon in a mom and pop tv repair shop my self

[@danieldoss1987]

@@MrPatdeeee Nope! I was talking to you brother. Back in the day, good TV repairmen walked on water!

[@MrPatdeeee]

@@danieldoss1987 Thank you.

[@russellross4045]

OUTSTANDING ENDING!!! BTW, I couldn't find your channel on ch 3. Ha, ha, ha. My grandpa was a T.V. repairman who fixed T.V.'s for little old ladies from my grandma's church. Never asked a dime from them but he got fat on all the cakes and cookies given him by these sweet ladies. I got started by going down to the basement, where he had his workshop, and we would listen to his old Midland shortwave set, with all the lights turned off. Hours listening to the BBC and VOA transmissions of world news. Civil wars in Africa, Cuban missel crisis. All this from a groundwave antenna, wrapped around the foundation of the house. Went into the Marine Corps and became a radio technician. PRC-25/77's, Prc-41's, Prc-47, Mrc-83/87's, Mrc-110's, Mrc-135's, and my favorite Trc-75's/TSC-15's. Stayed 20 yrs and retired just before Grenada. Then I got into Cb's. After that, IBM pc's. Ah the computer age. Started building my own. Still do. Using a workstation HP-400 for gaming. It's what I'm typing on right now. Starting up in SDR's. I love your video's and will be becoming a Patreon soon. Semper Fidelis, Sensei.

[@roncaruso931]

Mr. CarlsonsLab is better than the junk on TV these days. You look good in analog electronics.

[@sveinfarstad3897]

Sure!

[@julesl6910]

He looks mighty proper on that set.

[@McTroyd]

That was awesome using the TV itself for the outro. Probably the first video it's played in a long time. One of these days, maybe for April Fools Day, consider building a "time machine" and show us how you get these nice pieces. 😆👍

[@senilyDeluxe]

Ask Techmoan if he lets you borrow his :-)

[@McTroyd]

A neat idea, but I'm sure Mr. Carlson's will be better-engineered. @@senilyDeluxe

[@theplateisbad1332]

An episode from the past, in black and white and contemporary clothing would be cool.

[@McTroyd]

That would be kind of cool. Maybe Mr. C has an old video camera in his collection.@@theplateisbad1332

[@loumontcalm3500]

"We control the vertical, we control the horizontal" I watched that show on a set like this.

[@chrisreynolds6331]

Outer limits?

[@stevie.dx1710]

​@@chrisreynolds6331Yes.

[@haircut2015]

Other than the Twilight zone 98% of TV is mindless....

[@panthony1525]

All Mr. Carlson would have to do is smile at the TV and it would spring into life. Nice to see a TV on the bench tho.

[@ChrisdeHaan]

This brings back memories of growing up with my dad working at a TV and appliance repair shop. First place I learned electronics and started my love and fascination with technology, radio and electronics.

[@MadScientist267]

Yep my uncle repaired them, used to give me dead tuners to play with. Same outcome.. I'm heavy into electronics today... And there's something purely magical about tubes and particularly the CRT. I have a few samples around I intend to do something with someday but... 🤣🤷‍♂️

[@PatrickSilvestri-cg7bq]

Has a TV technician for 45 years. I still love repairing the old sets because you can still get tubes for them. This was a very great video and brought back a lot of memories from when I was a kid and when I had my shop once in a while, I’ll find a TV like this in a thrift store. They’re only five to $10 but I have to have them it’s the nostalgia and yet once in a while someone will see the TV in my shop And they want to buy it just for the nostalgia because their grandmother had one. Great work, Mr. Carlson. Thanks for the memories. sitting on shelf and want to buy it just because their grandmother had one so they’re still sellable but you have to be patient.

[@MrCarlsonsLab]

Thanks for sharing your story Pat!

[@RaggedyAtom]

The fact you were able to broadcast your outro on that thing is insane! The video quality and sound is actually pretty good despite the TV being old as time itself.

[@Fredy5100]

So good to finally see a TV on the workbench... thank you Mr. Carlson. :)

[@buttguy]

The amount of Zenith and RCA TVs from this era that still simply just work (even if the picture tube is on its last leg) is a testament to the quality of these brands from this era. Amazing that some of these sets are now over 70 years old and still doing their job.

[@Jody-kt9ev]

True.

[@tonyking9235]

MR C YOU JUST TOOK ME BACK TO WHEN I WAS AS POOR AS A CHURCH MICE . AND I HAD ONE TV FOR SOUND AND ANOTHER ONE FOR THE PICTURE. 😂😂 MOST PEOPLE TO DAY DONT KNOW HOW TO CHANG A , LIGHT BULB 😂😂😂😂BUT I THANK THE GOOD LORD FOR SOMEONE LIKE YOU MR C .

[@challenger2ultralightadventure]

I can imagine that TV in a hotel room on some remote highway, along with the "magic fingers vibrating bed", shag carpet and big glass ashtrays on the cheap night stand. Cheers from Winnipeg.

[@ianprestleton2081]

Hello I'm Ian from Birmingham in the United Kingdom i trained to be a television engineer back in the late 1970's / early 1980's after leaving school and prior going on to do other things. I am now retired and i restore vintage televisions as a hobby and i just wanted to say its great to see that you have a television set on your workbench at long last and i hope to see more television restorations very soon thank you please keep up the good work, Ian.

[@brucejenner5856]

A very interesting departure from the normal, but always absorbing repairs from Mr Carlson. Best part was the farewell message displayed on the vintage TV! Great touch!

[@user-qj5cu2xj8t]

Would have liked to see what DTV signals he could pick up on that TV (through a converter box) using the 3-6-9 antenna.

[@mortjoer]

I appreciate you putting the outro on that old telly ^^

[@W4GHW]

I love the ending!!! Back in the day, I actually worked on one of those. Man, you brought back some memories. Thanks!!!

[@lelandclayton5462]

I had one of those back in the late 90's when I was a teenager. Bought it for 15 bucks at a garage sale. Funny thing was I had a PlayStation hooked up to it and played Resident Evil 2 on it. Made the game so much scarier.

[@robinbrowne5419]

It looks like the TV we had back in the 60s. My sister and I used to watch Hercules cartoons on Sunday morning when my Dad wanted to sleep in. So we had to keep it quiet and sit really close. But then my mother would say "Don't sit so close, you will ruin your eyes." And we used to look in the grill in the back and see the orange glowing tubes. Ahh.. the good old days. Cheers :-)

[@kahlid-ataya]

at last my dream is coming true a TV @ Mr carlson lab.

[@gwesco]

When I was in High School back in the 60's, my neighbor had a TV repair shop in his garage. I used to hang out there and help him out. He often used the brute force method of just swapping parts. I once showed him with an oscilloscope that the expensive flyback transformer was not bad. It was just the horizontal oscillator not running. Eventually went on to a career in telecom and spent nearly 30 years working on Nortel PBX's.

[@davidbrittenham4631]

Ah, yes, Nortel, of Northern Telecom fame. I worked for many years installing, programming and maintaining Northern's SL-1 and it's later versions, then the Meridian and Option series. I loved that job. I could still program one today from memory if you sat the TTY terminal in front of me. I retired from the phone company in 1992 and was shocked when I learned Northern Telecom was no more. Good old days. And, I too, started out as a TV and radio repairman right out of high school, class of '72, with absolutely no training at all, just the knowledge of electronics I had learned as a ham radio operator, starting at age 12. I bluffed my way for a couple of weeks until I got the TV circuits figured out, then went on to own my repair shop for a while before deciding the telephone company was where I wanted to make my career.

[@gwesco]

Ah yes, the KSR-43 tty that came with the early Nortel PBX's. I eventually connected ours up to a serial port on my 286 computer. No more pin feed paper and I could just capture the error and maintenance messages to disk. We started with an SL-1N and I upgraded it many times to an 81C and was going to upgrade to Succesion but left the company after 32 years before I had the chance. Ended up teaching Linux, Windows Server and VoIP at the local community college for 12 years before I finally retired.

[@kendom33]

Great ending too. Many thanks

[@jassenjj]

The isolation of the sound and the picture is great and the lack of paper capacitors in the set definitely make this an easy job - the set practically worked.

[@peteb2]

Oh the memories come flooding back! TV servicing for a while in my electronics career. Most times the TV was set upon it's own small footprint cart same as workbench height that it could easily be swung to face the Mirror Wall (which incidentally made the workshop appear a huge place). You could maneuver the Set close enough to test sources and reach to measure voltages. In my country when Colour came no sets had valves (tubes) so all that experience & knowledge just went out the door...

[@Bata.andrei]

I learned electronics by helping my grandpa fix old black and white (sometimes colour) tv sets. I was 10, maybe 12 years old... I am 42 now and never stopped learning and practicing electronics. Thanks for the memories!

[@djsi38t]

What a gem!...RCA was king...my dad bought the top of the line RCA floor model in 1985 with remote control!!! and that remote had about 40 buttons which was unheard of in the early eighties.Everyone was amazed by the new technology.That tv lasted 25 years before being retired..still working..

[@boingaon]

YES ! Television! I have over 60 CRT televisions from every era, and am excited to start restoring them myself.

[@MrBonez208]

The yoke has / had rubber wedges along with the clamp to hold it in place on the neck of the tube. A lot of the time, the top wedge disintegrates and the top of the yoke falls forward against the tube, deforming the top of the picture. Usually in a color set this would cause purity issues. Color tv would use a solid color usually green, then check red and blue for no dark spots. A B/W would just be the single adjustment and a solid raster without dark spots. To adjust Purity, is the main adjustment for yoke alignment on the neck. The distance from it to the back of the CRT. The centering rings are just that. To center the picture. The vertical and horizontal controls on the back of the set are for the overall picture and not the center. A wedge on the top of the yoke and a little finesse of the clamp would help the focus and linearity of the top half of the picture. Color sets and static focus or dynamic convergence. Big screens with three individual CRT’s having to overlap picture (converge) would have guys tweaking for hours. Convergence adjustment was analog, then became digital. It’s a lost art, to know which adjustments did what and what to move for correction. Very cool find and nice to see it still in an operational condition.

[@patricknesbitt4003]

I always tried to avoid loosening the yoke clamp on really old or high mileage TVs. Had too many of the little tabs under the clamp go brittle and just snap off from the yoke.

[@andrewprettyquick2070]

Pretty much serviceable. 10:23 10:40 overscan is spot on it seems. 15:28 here we go. 17:25 there be volts in here!.

[@ltsiver]

Wherein Mr. Carlson steps into Shango066 territory....

[@ntsecrets]

a vintage tv resurrection released at 10:30 ET on a Saturday... yeah lol

[@maskddingo1779]

Gotta klinkotwerbulate things.

[@chrisreynolds6331]

Direct from flavour county. The nicotine haze. Nothing but the best! 😂

[@stevie.dx1710]

​@@maskddingo1779Love that.

[@Internutt2023]

Shango has done some EPIC resurrections, using the approach of minimizing the amount of work, especially in the "mouse house" and "Hoffman homeless pi**ing post" TV's. This was just a "show & tell" video in comparison. Jordan Pier has done some good complicated older and later model TV repairs as well, and he does it for a income, so he has to be proficient at it.

[@markoszouganelis5755]

...νοσταλγία="nostalghia", in Greek is "homesickness" but in the light romantic way! That is what I felt when I watched this video! I remember when 13 years old (back on 1970) I repaired our TV set from a broken cathode ray tube (screen), having very little knowledge in electronics by that time, but I finally did it! I remember first testing it (sound) by adding a homemade resistor, (lots of thin covered copper wire), in series with the filaments of the rest of the tubes (to substitute the load of the cathode ray tube by not having any idea what resistor I would use not even having one) and next step, ordering a new CRT, (from Athens, Greece), to replace it and I remember how happy this repair made me and not only to watch TV! So I loved electronics and become an electronic technician from then on! Thank you Mr. Carlson!🌈🕊😊♾

[@chrisa2735-h3z]

This TV is in beautiful cosmetic shape!! I wish that TV is now had this much personality in their design!! The electronics in this one aged surprisingly well too!😮

[@jampskan5690]

"Let's see what's on TV." Lol, that had me.

[@denisdespins1127]

Dude, you just got my FULL attention ! I've finally been PULLED away from the poly-Tics WAR...(for a while) TNX Paul...

[@user-tj8zm6dg4y]

Smell-a-vision 😂

[@gabrielleeliseo6062]

Great Shango-ism

[@RonaldoSantos-pw6yh]

Nice to Mr. Carlson workin on TVs! As Shango066 would say, the smoker's choice, definitely, haha! Keep up the nice work!

[@bonemar66]

Come to flavor country, with more nicotine glaze.

[@soundmankreek]

Yes! Yes! Yes! Finally, a TV! I simply CAN'T WAIT for you to go deeper into televisions! Very much looking forward to it!

[@DrewskisBrews]

Nice! One little tip; Shango 066 has decent success avoiding the camera vs CRT rolling scan bar by shooting in low ambient light. EDIT: It appears that you came to the same conclusion later in the video.

[@jamesstout3430]

The only thing missing is Shango's ham fisted methods of cranking every knob and control on the set. Lol

[@ScoutCrafter]

What a great ending. 😃👍

[@simonilett998]

I certainly don't miss that horrific high frequency EHT squeal from old CRT's😁👍

[@jessemontano762]

EHT??

[@simonilett998]

@@jessemontano762 Extra high tension. The awful high pitch squeal that used to be normal for old CRT TV's when operating.

[@rodleger7132]

This brings back memories of my dad's electronic business. He and his Tech's used a mirror on a stand to align the CRT images. The mirror would reflect the image. This way they could see the screen without having to switch between front and back of The TV.

[@rohnkd4hct260]

Those old sets were tuff! They were made to work and to last. Worked on many a set. LOL can't remember the last time i heard the word "raster."

[@robertsteven108]

This is the first time I've seen you work on a TV... thanks for the change, it was very interesting. My favorite vids are your antique radio restorations. Thanks for sharing! All my best...Bob.

[@4nk8r]

That was refreshing . 2024 off with a bang :)

[@elmofeneken4364]

Today's kind of a boring day. Just came in after shoveling snow and there's nothing good on TV, until I saw Mr. Carlson on TV in black and white. Enjoyed this one! Better than shoveling snow.

[@jimdavis6833]

That TV was probably sitting on a shelf above a bar at one time.

[@carolriley9392]

This is the first time I've seen the master work on a tv! Wow great honor!! 😊

[@onemanshow4116]

FINALLY a repair I feel confident that I could duplicate!

[@buriedbits6027]

I really like the attention to tube technology.

[@davidportch8837]

love the end Paul...

[@ghohenzollern]

When my parents bought our first computer, a Timex Sinclair, we only had one television, but my grandparents had an old black and white set they gave us to use with it. And this is the exact model and color of that set. I hadn't thought about it in years.

[@kenhouser1753]

Thanks for sharing that with us! I started TV repair in January 1973 with the local RCA dealer/repair shop. The XL-100 had just arrived, but we did many tube sets of all brands. TV repair is pretty much gone now, but I still do industrial electronics, thanks to all the experience of television service. Thanks again!

[@OBC-radio]

“This set is filthy” (proceeds to wipe screen with windex). Meanwhile in the Mojave Desert, Shango finds a TV set buried in the mud for 50 years at a mine-shaft dump site and says “let’s resurrect this!”. I guess it’s all relative, a pretty cool looking RCA. Nice find! 😎

[@robertburrows6612]

That took me back to the days of being a young lad. Where I spent many a happy hour gazing in the back of a TV set, and fixing them to earn a few bucks . Those were the days they built things to last. The good old vacuum tubes last for years and survived faults the modern day equivalents can't great video

[@Tysman909]

Nice to see that TV working so well with just some adjustments. The part at the end was really cool great idea

[@dhpbear2]

I owned a similar TV back in the mid-70s. "Instant on" (filaments are lit even when power is off!) and hot-chassis design ( I found THAT out the hard way when the ground-lead of my added audio cable came in contact with my radiator!)

[@MatthewHolevinski]

god I miss radiators

[@cdnpont]

I never thought I'd say it, rarely ever seen anymore, but there is still a charm to a low res BW image. Thanks for this.

[@radiorexandy]

Nice video! Imagine, a 60-plus years' old television working "right out of the barn."

[@lopermachine]

Patina TV. Also I would buy a “sketchy line cord” shirt. Very cool outro btw

[@yambo59]

Im 64 and grew up with CRT tube sets, this ones working amazingly well for its age, quick search shows two variants - the "new vista" (black and white) and "new vista color" both made from about 1962 to 1972. I had two newer Sharp 20" CRT color TV's that worked without repair for around 20 years before I finally turned them in still working great for scrap recycling. Had many other tube sets I remember since I was a kid, admiral, RCA wood console, Panasonic, as well as crt monitors & one like new 17" Dell CRT I hated to turn in cause I got it new in the box as new old stock and it worked perfect - but I got tired of hulking them around along with larger color CRT's that weighed a ton. So much easier to move a flat screen, but it seemed almost like I didnt want to get rid of them like some piece of my childhood history - lol

[@GeigerCounterVirtualMuseum]

Loved your b&w tv commercial at the end. 😄

[@jonathanwhiteside6092]

My uncle was a TV repairman many years ago when valve TVs were the top tier technology. He would approve :). Also looks like it can straight out of Fallout!

[@MrCrystalcranium]

Love the NicoBrown coloring. Not exactly the TV resto I was hoping for from you but I’m happy there’s more on tap. I’m doing a 1948 Crosley with the continuous tuner and 10BP4 CRT right now and the horizontal section is making me crazy!!! I’d love to see you do a post war set replete with waxies, Micamold mystery caps and a 10 pound power transformer!!! Love your work and your channel!

[@michaelmoore7975]

Ahhhh....a TV from back in the day the nearest kid was your remote/tuner. I remember those days well. My arms are still sore.

[@KameraShy]

Always an infomercial. Just can't get away from them.🤣

[@larrysmith9359]

Not bad at all for a CRT image. In 1973 I built a Heathkit color TV. I got some real experience in soldering. It was a lot of fun!😅

[@davelowets]

22:05 Ditto... 👍 I remember as a young boy always peering intonthe slots of the case in any vacuum tube equipment, and being mesmerized by the glowing tubes in there that were passing and amplifying a signal through nothing but empty space. I had a basic understanding of how vacuum tubes worked back then, and I was amazed at how such a simple device could work as well they do. I still love vacuum tubes today. The circuits aroumd them are so simple. My favorite application for tubes is in audio equipment. Although tubes are not great at shoving mounds of current through low impedance loads, such as speakers, the ultimate circuit for a tube audio amplifier (to me) is an all tube front-end, followed by a beefy MOSFET final current stage. Bliss... 😉

[@thatampguy]

Haha clever ending

[@rillloudmother]

the sound of your audio coming through the TV speaker reminds me of the sound of my grandma's kitchen TV circa 1977.

[@richardmiranda5357]

It seems to be a mid 60's B&W television set. It's incredible that it works after being sitting for years but in order to have it in a permanent operating condition, it needs to be re-capped.

[@hotpuppy1]

Late 60's I'd bet without checking the #'s. Filter caps replaced for sure.

[@maxklingert6722]

I was hoping for a toasted resistor or a leaking cap at least. The vintage dust inside will have to suffice...

[@stevie.dx1710]

Absolutely love this. Talk about quick and dirty. (emphasis on dirty) Loved the ending. Thank you for this Mr. C.

[@jamied2108]

Nice start getting a raster on first power up. Thank you for sharing!!!

[@johnhillside9105]

😮boy..... I really liked this moment. I'm going into my Eighth Decade now as of the 3rd and Lo and Behold I see my RCA right there. This sat on a stand which would roll around. I see the window for the channel,... but I think differently about the knobs,... anyway. I watched the Apollo Moon Landing and I was talking this TV to Crooked Creek School for the Mercury Flights. Gee,...gee, gee..

[@SDS-1]

Heck yeah Carlson and Shango TV videos today ❤❤

[@andrewprettyquick2070]

Telly fixing day!. I discovered dry joints myself without before having heard of them. Oh the fear.... 😂

[@skillaxxx]

Amazing to see it come alive as well as it did after all those years !

[@paulsullivan6392]

Just a few things lacking. My youth, you in our living room kneeling behind our Philco TV with your viewing mirror on a stand in front of the TV and your tube caddy by your side. Thanks for the trip down memory lane. Though somewhat belated, ....may 2024 bring you good fun, good fortune and good health. 73 / W6VPS

[@jhoughjr1]

Pretty good picture

[@betterl8thannvr]

Great bit of variety for the channel! I like spacing out the receiver restorations to see other interesting projects in between.

[@donl1846]

Always nice to see an old TV on the bench, thanks Professor Carlson ! PS cool ending !!

[@larrynelson3329]

Awesome style little TV. Bet it would clean up and shine like new.

[@bobbressi5414]

I am grateful to you and those like you, who study these outdated technologies to keep a critical part of history alive.

[@mrt7152]

Neat looking little tv

[@ToobTime]

I remember the TV shops had a mirror ready. The tech would place the mirror in front of the picture tube then make adjustments safely in the back while keeping an eye on the mirror. I also remember a rotary table, perhaps from a bar stool to easily rotate the set as needed.

[@Tamalain]

You need a ceiling-mounted track and gantry for your camera. It would allow easier placement and shifting during recording.

[@cuteswan]

Is that set VHF only? That would have been torture to me as a kid: not being able to spend Saturday watching _Creature Double Feature._ Yet these days it's more enjoyable watching a new Mr. Carlson's video on a Saturday afternoon. :)

[@dougbrowning82]

It's a Canadian market set. UHF wasn't required until the early 1970s. In Winnipeg, we didn't even have a UHF station until 1998.

[@morik3188]

I love all of your videos Mr Carlson. But I think I may find this TV one the most fascinating. Would love to see more like it. Thank you so very much for doing these.

[@mattheweurich33]

I had a set just like this one, in my bedroom when I was growing up. However, the set in the video doesn't appear to have UHF tuner. Still brings back memories of my childhood!

[@renejensen5656]

Bring back memories from my time as a repair tech here in Denmark, long time since 4:3 SD 525/625 televisions , now im on the side of the transmitter. Been with our national broadcaster for 32 years now as a projectmanager doing constructions of television facilities

[@RobertKohut]

Great ending... 🙂

[@TBizzell68]

Really cool. I loved the outro

[@shmehfleh3115]

The before state of that TV reminds me of my youth, when every single public building, restaurant, bar, apartment, barber shop, hotel, motel, airplane, bathroom, whatever all smelled like years of striated cigarette smoke. I don't miss those days.

[@darkwing4475]

Thanks for this really great video,,, was kewl seeing this old set in front of a backdrop of about a zillion dollars worth of test gear,, :-)

[@doctorjohn-burgtekie]

Mr. Carlson now your a TV star keep up the good work and thank you.

[@neiltheplayer]

OMG we had one of those when i was a youngster - WOW!

[@davido.hamilton3254]

Thanx Mr. Carlson. It's the 1st. time for me that I've watched you working on a television, and you don't even need latex gloves like shango 066!

[@SeattlePioneer]

I homebrewed my novice CW transmitter largely from parts that came from an old television chassis I bought for 50 cents at St Vincent De Paul. This was circa 1970. Of particular value were the power transformer, rectifier tube for the power supply and sweep tubes for the oscillator and amplifier.

[@stirlingschmidt6325]

Great stuff! As always, well done!

[@7649angel]

Thank you.great fun!

[@MrCarlsonsLab]

Glad you enjoyed it!