Base 370z Front Bumper to Nismo V2 CONVERSION | Install Guide

After test fitting my bumper here: • How to PISS-OFF 370z N... ; I finally got it back from the body shop and ready to be installed!
PARTS LIST
1 x Fascia - Front Bumper Nismo V2 [FBM22-6GA0H]
1 x Moulding - Front Bumper LH [62087-6GA0A]
1 x Moulding - Front Bumper RH [62086-6GA0A]
4 x Moulding Screws [76838-JF00A]
1 x Tow Hook Cover [62023-6GA0A]
1 x Protector - Front Bumper LH [62064-6GA0B]
1 x Protector - Front Bumper RH [62064-6GA0A]
FOLLOW ME
Channel Instagram: @its.ericvenzon
Photography Instagram: @vndrdog.media
It's Eric Venzon publishes automotive, photography, and technology contents located in Southern Alberta, Canada.
#Nissan #370z #FrontBumperConversion
------------------------------
Track: Infinito - Hiracutch [Audio Library Release]
Music provided by Audio Library Plus
Watch:
• Infinito - Hiracutch | Free Backgroun...
Free Download / Stream: alplus.io/infi...
------------------------------

[@Gscoops]

i used my non nismo undertray for my nismo conversion. worked fine

[@ItsEricVenzon]

Thanks! It's just probably how mine was rubbed off that it wouldn't bolt up.

[@Gscoops]

@@ItsEricVenzon most likely man

[@PoloZ34]

was there a fender liner gap in the front? Howd u fix that

[@Gscoops]

@@PoloZ34 I used nismo fender liners

[@PoloZ34]

@@Gscoops gotcha since they send the piece to close the fender gap I went with base liners but an oem nismo undershroud

[@aidenvfx2246]

Amazing video man. Just bought a seibon vented carbon fiber hood and a nismo v2 bumper and found this video to make sure there was no extra steps to installing the bumper. Thanks man

[@ItsEricVenzon]

Thanks man! Glad I could help. Pretty excited for that Seibon hood for ya. 👌🏼

[@yezyk07]

Whats amazing about it ?

[@cediepurificacion8480]

Thats dope !!! Im not really a big fan of the drls but sheesh that looks nice af

[@ItsEricVenzon]

Same thoughts about the DRL! Thanks man! IMO, it just makes it a tad bit aggressive.

[@blakmoto8338]

thank you for spreading knowledge.

[@ItsEricVenzon]

Anytime I can help!

[@이재용-i1w]

Thanks to your video. I am also planning to replace it with a Nismo. thanks.

[@ItsEricVenzon]

You bet man! Feel free to hmu if you have any questions!

[@이재용-i1w]

@@ItsEricVenzon Does the front lower engine cover splash guard need to be replaced for the Nismo?

[@ItsEricVenzon]

@@이재용-i1w yes, the nismo bumper sits lower

[@이재용-i1w]

@@ItsEricVenzon ok thank you

[@pookiecst]

I’m enjoying the vids man keep them coming. I’m about to do all the stuff your doing. I just got my Z, 2014 touring, a couple years ago. I’m also gonna do door handles, front bumper switch and DRL’s.

[@josephcamden5964]

How did you attach those pieces you were gonna get bolts for, did you ever get to it? Bolt size or where did you find em

[@ItsEricVenzon]

@@josephcamden5964 I installed them on EP29 and I used small hex head bolts that i had laying around the house. 62010R is the Nissan OEM part number

[@1morgaming650]

Hey man! Love the videos. Helps so much with deciding how to turn my 370z into things. I do have a question though, you got a link for that spray can gun you used for your paint?

[@reynaldorivera743]

You need the side nismo skirts But looking good bro

[@ItsEricVenzon]

Might as well hey? lmao

[@reynaldorivera743]

It will tie it all together .Its your car but definitely the side skirt of the nismo Will make it flow with the conversion

[@sebastianleja370z]

So it seems like the non-nismo fenders are no biggie it's just the under tray? Also are you planning on doing oem DRLs?

[@ItsEricVenzon]

Yup! I'll be installing those parts this year! Just waiting for the weather up here to clear up. Not going with oem DRL. 😏

[@jvntrs5989]

Any issues with gaps or fitment using the Nismo front bumper protectors with the non Nismo front fender liners?

[@ItsEricVenzon]

Hey man! Good question, there are NO gaps using the non-Nismo front fender liners and adding the Nismo front bumper protectors! I installed it right over here: kzbin.info/www/bejne/nYncmZ-nqrdjh8k

[@Harvey-dg3ry]

What undertray did you use? Im wondeifng if i can just get the 2015+ aluminium undertray?

[@ItsEricVenzon]

I installed the 2015+ nismo alum undertray. And it's in my channel! 🫶🏻

[@Harvey-dg3ry]

@@ItsEricVenzon I'm looking at the Z1 undertray. Would I need anything else undertray wise? Some people have said about fender lines?

[@ItsEricVenzon]

@@Harvey-dg3ry I'm running the Z1 understand. You can get away with the base fender liners tbh as long as you have the Protector part (the plastic piece that goes on the side corners of the v2 bumper)

[@Harvey-dg3ry]

@@ItsEricVenzon thanks man you've been a great help. I'm dreading the spray as mines chicane yellow so I've heard it could be a nightmare but it'll be worth it

[@ItsEricVenzon]

@@Harvey-dg3ry of course man! Anytime i can help. Yeah you'll definitely get it to blend with the rest of the panels for sure.

[@tr3ynag4ta]

It has the led lights right?

[@ItsEricVenzon]

Nope! I'm skipping that one since I'm too cheap.

[@arielluevano5213]

Hey man I was wondering if you got the 400 dollar bumper or the 700 dollar bumper because I’m trying to see what the 400 one fully comes with

[@ItsEricVenzon]

If you're referring to the options from Z1 Motorsport, all i can see are $7XX for the front bumper conversion set, $4XX for the rear bumper. But Z1's front bumper set is everything you'll need and then the Nismo undershroud

[@josephcamden5964]

Think the difference is one comes with all the good, and other comes with bumper itself ​@ItsEricVenzon

[@theuziii]

i have a 2010 z can i also put the 2015+ nismo bumper on mine?

[@ItsEricVenzon]

As far as i can tell, yes!

[@WhoIsRah]

looks dope.. you had to get it painted? how much did the bumper go for?

[@ItsEricVenzon]

Thanks. I had a discount from a body shop so it was $350-$400

[@WhoIsRah]

@@ItsEricVenzon how much was the bumper itself from nissan? just trying to see if its cheaper than on z1

[@ItsEricVenzon]

@@WhoIsRah i didn't keep the entire invoice but it totalled to $998CAD back in Spring 2022.

[@ChiefMason]

Where did you get the bumper from?

[@ItsEricVenzon]

I got it from the local Nissan dealership

[@ajwhiteiv]

Does anyone know if theres any reason it wouldn’t fit a 2012? Everything seems the same but specs are just saying 2015+

[@ItsEricVenzon]

I've read that there shouldn't be an issue with the conversion since they never changed anything drastic since 09. You'll probably need an undertray though

[@ericvenzon9626]

Your yard looks nice too 👌😃

[@ItsEricVenzon]

YOUR yard looks nice 😂

[@ItsEricVenzon]

YOUR yard looks nice 😂

[@AidenGarza-o2o]

What year is the Z

[@ItsEricVenzon]

2017

[@dequavistyrellion1401]

did you get the bumper from z1?

[@ItsEricVenzon]

Nope. I got it from my local dealership here in Canada. It's cheaper than importing it from Z1 in my case.

[@dequavistyrellion1401]

@@ItsEricVenzon even the plastic covers for where the drl suppose to go?

[@ItsEricVenzon]

@@dequavistyrellion1401 there are no OEM covers for the DRLs from Nissan so you might want to order those from Z1 or Concept Z Performance

[@dequavistyrellion1401]

@@ItsEricVenzon how much was the bumpers from the dealer if u dont mind me asking. im from canada too

[@ItsEricVenzon]

@@dequavistyrellion1401 Hey man, everything in the parts list was $998.83 CAD in 2022 but I work at a dealership so that's with a discount.

[@pookiecst]

If you want some affordable DRL’s check out lotusworks_370z that’s where I’m getting mine. Have a good one man.

[@ItsEricVenzon]

Thanks mguy! Will definitely hit up. 🤙