Рет қаралды 16,779
"In this video, I use the LCP Simulator to demonstrate how to program the basic parameter into Danfoss LCP. Although it is not an actual Danfoss VFD and LCP, but the steps show here is the same when you physically do it on-site.
The setup includes Initialisation, Motor Data input, Reference Limit, Ramp Up & Down and Digital Input configuration. Hopefully, this video is of helpful to viewers. If you wish to download the LCP simulator, please leave comment and I will show you the method to do so. thanks."
This channel shares a series of hands-on, simulated as well as conceptual knowledge videos about Instrumentation calibration and troubleshooting based on my actual working experience as an ordinary technician.
The approach taken mimics the real life experience that occurs in factory setting. I really wish my humble and little unknown videos will at least help those who wish to learn about process instruments.
Please kindly help to click "Like" and "Subscribe" buttons to support my effort as the task of making videos are tedious and time consuming. I would like to take this opportunity to sincerely thank everyone for supporting my effort.
"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fluke Digital 789 Multimeter :
bit.ly/3Qp2Waf
Disclaimer: This video description contains affiliate links, which means that if you click on one of the product links, I may receive a small commission. This helps support the channel and allows me to continue creating videos like this. Please note that the product price remains the same whether you purchase it directly from the owner or purchase it via my link shown above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "
#Instrumentation
#Electrical&Instrument
#Calibration
#CalibrationTechnician
#InstrumentTechnician
#InstrumentCalTech