In this video I show you how to install 3 great accessories for your Benelli M4. Accessories from GG&G - Tactical Bolt Release, Tactical Charging Handle. I also replace the stock tube extension with an aftermarket brand.
Пікірлер: 226
@DataMcBits3 жыл бұрын
Nearly 7 years later still helping people. Great tutorial!
@BattleBeaver3 жыл бұрын
Yep, stop making videos years ago!
@76boyd6 ай бұрын
Thanks for this video I'm doing similar mods next week. So still useful 9 years later!!
@mk325ef7 жыл бұрын
Thanks for putting in the effort to go above and beyond normal installation by showing what not to do. This was a great video!
@BattleBeaver7 жыл бұрын
Thanks! Hope the video helped make your installation easier.
@russianbot55543 жыл бұрын
Huge help!!
@danielbeard31348 ай бұрын
Best video description ever Tks 👍
@BattleBeaver8 ай бұрын
Thanks!
@davidanderson20313 жыл бұрын
Nicely done. Articulate and well explained. Much better than your average tutorial.
@BattleBeaver3 жыл бұрын
Thanks!
@XTrooper39368 жыл бұрын
I've owned my Benelli M4 Tactical for several years now and have made a number of modifications to it, but never added this bolt release pad. Frankly, I thought its installation would be WAY more difficult than I've learned it actually is after viewing your terrific instructional video! I just placed an order with GG&G for one! Thank you VERY much for making this video!
@BattleBeaver8 жыл бұрын
+XTrooper3936 Thanks for watching! The GG&G stuff is great!
@wgdavidson966910 ай бұрын
Probably the best video I have ever seen for these mods.
@BattleBeaver10 ай бұрын
Thanks!
@cat5dookie15 ай бұрын
You made this look easy. Getting that latch pin was tough! Thank you
@BattleBeaver5 ай бұрын
Thank you!
@mdjak36867 ай бұрын
One of the best how-to videos. ty.
@5252dhuff7 жыл бұрын
Have started to progress to light weight smithing, and your video is very clean and informative, thank you for your ideas and process. M4 new owner.
@BattleBeaver7 жыл бұрын
You're welcome, thanks for watching!
@spidersinspace10992 жыл бұрын
Thank you. IMO this video is the most clear and concise instructional video on how to install this new type of bolt release button due to your correct use of terms when explaining the various steps and use of the tools required.
@BattleBeaver2 жыл бұрын
Thanks!
@mykolaorda49915 жыл бұрын
Excellent video. Very clear and nicely detailed instructions. Great that you also included information on what issues to avoid and how to correct them if necessary. Great recommendation on installing the specified upgrade features. Excellent microphone volume (too many other KZbin videos have very low volume making it difficult, if not impossible, to hear the individual discuss his topic) and excellent video filming. Overall a superior and highly informative video. Great job!
@BattleBeaver5 жыл бұрын
Thank you!
@appstate19962 жыл бұрын
This is one of the best "how to" videos on the Benelli m4 I've seen. Thank you very much! I hope GG&G or Freedom Fighter Tactical get some new oversized bolt release buttons in stock soon.
@BattleBeaver2 жыл бұрын
Thanks! Sadly I stopped doing new videos 5+ years ago, no time.
@DB57RB6 ай бұрын
Excellent video showing how to install these items.
@BattleBeaver6 ай бұрын
Glad it was helpful!
@Stevenwtx9 жыл бұрын
I hardly ever comment on videos but excellent video. Thanks for making it.
@BattleBeaver9 жыл бұрын
Thanks Steven, much appreciated. And thanks for subscribing!
@jonathanmiddleton60353 жыл бұрын
Great job working through potential mistakes
@sw6402 жыл бұрын
Just installed mine today (4/4/22) and thank you took me less than five minutes with the help of your awesome tutorial video (subbed)
@BattleBeaver2 жыл бұрын
Thanks @wolfman! Very happy you found it useful. Thanks for the sub, but I'm no longer making videos, haven't been for 2-3 years now. But glad that my videos are still helping people!
@brighthought112 жыл бұрын
top notch video, appreciate it, you explained it very well, I feel comfortable to accomplish this installation now! props!
@BattleBeaver2 жыл бұрын
Glad it helped!
@Kismetix3 жыл бұрын
Excellent video, Battle Beaver! Thank you for the effort you put into making this one!
@BattleBeaver3 жыл бұрын
Thank you! I don't make videos any longer, wish I could.... life, and all that. :)
@robertleemurrerjr.82453 жыл бұрын
@@BattleBeaver Just to let you know, this video was essential to installing mine this past rainy weekend. Much appreciated and hope you get back to making useful content.
@BattleBeaver3 жыл бұрын
@@robertleemurrerjr.8245 Thanks, it makes me happy that this 7+ years old video is still helping people! Unlikely I'll start doing videos again though, I sold all my video/audio recording equipment a couple of years ago. Again, so glad this video helped you out, THANK YOU for watching!
@bertraminc94124 жыл бұрын
Also, you'll notice that it's easy to mar up your receiver with a punch while removing the retaining pin for the stock bolt release handle. You can use blue masking tape over the hole or around the hole to protect the receiver prior to punching out the pin... more layers if you are more concerned. This is for those who actually want to protect their gun from useless damage during gun work.
@santiagoalvarez13922 жыл бұрын
no se si tu canal todavía este activo pero muchas gracias por tu video ,pude hacer cambios a mi benelli m4 gracias ,I don't know if your channel is still active but thank you very much for your video, I was able to make changes to my benelli m4, thank you very good your video
@BattleBeaver2 жыл бұрын
Thank you!
@dominicbadura8 жыл бұрын
Great video! I'm looking at an M4 as my first shotgun, and this seems like some of the best and easiest modifications I can get. Thank you!
@greedyfrog5053 жыл бұрын
One of best,how to videos i have seen. Very thorough, good job!!
@BattleBeaver3 жыл бұрын
Thanks! Glad it helped.
@robshannon81087 жыл бұрын
I was able to get it done with your instruction, thank you.
@BattleBeaver7 жыл бұрын
Glad to hear the video helped you, thanks!
@jd2914 жыл бұрын
I just purchased the same item for my Mossberg 930 and it looks to be an easy install thanks to the video, even though it's not a benelli, thanks 👍
@scfcan58864 жыл бұрын
Not a Benelli but a great shotgun . Polish the chamber , stay away from federal shells and you'll be fine. If you can get Remington gunclub for skeet its 100% reliable. Check Jerry Miculek's video on cleaning and maintenance. The charging handle is a good upgrade since the original one broke . Enjoy
@backom2 жыл бұрын
ok this video sti'll helps people at 2022 :)) good job man.
@Daemeon933 жыл бұрын
Note: on a Benelli M3, the GG&G bolt release will hit the forend when it is in pump action mode in the out of battery position. You will need to grind a milimeter off the end in order to prevent the forend from being caught under the bolt release.
@2006steel20064 жыл бұрын
Great Video ! Thanks from Germany !
@BattleBeaver4 жыл бұрын
Thank you!
@BSFilms19974 жыл бұрын
Great instruction! I’ll definitely look at this video again should I end up getting an m4.
@jonny0004 Жыл бұрын
Very informative job with your video! Thanks
@BattleBeaver Жыл бұрын
Glad it was helpful!
@vietman79 Жыл бұрын
The bolt release stock spring is fine for me. I just put a metal pad over it because the button is too small. The tube extender looks tacky. It looks better if you just replaced the entire tube instead of just adding an extender.
@macclark41124 жыл бұрын
I actually did the mag extension using the Titanium 2 round extension. It is very easy to install and took two months to receive because of back log orders.
@stevelynch9810 жыл бұрын
never noticed m4 had checkering on the back of the trigger guard. good instructional video
@BattleBeaver10 жыл бұрын
Thanks! The Benelli M4 is great. Expensive, but awesome.
@brucetittle71392 жыл бұрын
That was a professional, informative video! Thank you.
@BattleBeaver2 жыл бұрын
Glad it was helpful!
@brucetittle71392 жыл бұрын
@@BattleBeaver Very
@Ainokea20229 жыл бұрын
I just purchased the bolt release button and your video is excellent. Can't wait to install it.
@BattleBeaver9 жыл бұрын
Thanks! You shouldn't have any problems installing it, but if you do, feel free to post your questions here. Thanks for watching!
@js32177 жыл бұрын
It suddenly occurred to me after watching this video that Mr. Beaver installed the new extended magazine tube without actually extending the magazine! In order for the extended magazine tube to work, he would have had to remove the spring retaining nut then re-install it on the mag tube extension. This is what increases the mag capacity to seven rounds.
@BattleBeaver7 жыл бұрын
You are correct! But up here in Canada, we are limited to 5 rounds in a semi-auto shotgun, and removing the spring retaining nut would be illegal up here (stupid, I know, but those are the laws we deal with up here). "Then why install the new tube?" I hear you asking.... :) Well, because I didn't like the "look" of the stock tube that had the "ribs".
@js32177 жыл бұрын
Then why put an aftermarket tube on it at all??
@BattleBeaver7 жыл бұрын
Thought I was clear in my previous response.... I didn't like the way the stock tube looked.
@blazkowicz94554 жыл бұрын
Can’t you have 5 rounds of the maximum length shot shell with semi auto shotguns? I thought with the extension tube it would allow five 3 inch shells. Of course yes you would end up having more than five 2 3/4 but I thought they based it off the max length of shell for that shotgun. But someone do correct me if I am wrong
@308bushmaster9 жыл бұрын
Awesome video! Thanks. I love that big bolt release button.
@BattleBeaver9 жыл бұрын
Thanks! The bold release button from GG&G is awesome!
@MrJoeFoley4 жыл бұрын
Fantastic video! Thank you for taking the time to make this.
@BattleBeaver4 жыл бұрын
Thanks! Hope it helped you out. Haven't made a video in years, stopped making new videos when youtube demonetized firearms related videos.
@GetToDaChoppa509 жыл бұрын
nice vid, excellent explanation on the install for the enlarged bolt release which I plan on getting for my M4
@BattleBeaver9 жыл бұрын
Thank you, happy you found the video helpful. I think you'll like the bigger bold release!
@mamdouhalsamman6 ай бұрын
Really, it's an excellent job. Well done. 👌
@BattleBeaver6 ай бұрын
Thanks a lot 😊
@Marcopolo6062 жыл бұрын
Yes, thank you, very helpful
@BattleBeaver2 жыл бұрын
You're welcome! Glad it was helpful.
@tangledline9 жыл бұрын
This is a great video. I would probably use some blue loctite on that tube extension. Mine would wiggle loose due to shooting. Not anymore. :)
@MrMatts0768 жыл бұрын
How does it "wiggle loose"? Tighten up the nut till it doesn't click . I fire hundreds of rounds and never had that problem.
@tangledline8 жыл бұрын
Matt S Beats me, probably because I beat the shit out of my gun and not baby it in a safe. 10 year warranty, over $1500...damn right I am going to use it. Hahah
@georgejoseph41643 жыл бұрын
What a clear and outstanding video. Many thanks.
@BattleBeaver3 жыл бұрын
Thank you!
@MrSpinteractive3 жыл бұрын
Excellent tutorial - thanks!
@BattleBeaver3 жыл бұрын
Thank you!
@dj59434 жыл бұрын
Outstanding video! Thanks!
@silent83bob3 жыл бұрын
Thanks for the video.
@QuantaviousWashington Жыл бұрын
Great video 👍👍
@Postal03114 жыл бұрын
Thank you, great tutorial.
@BattleBeaver4 жыл бұрын
Thank you!
@skepticalskeksis2215 жыл бұрын
What about a longer tube spring? I replaced the whole mag tube with a SS one and it required a new spring. But very well done and informative video. Now that I see how easy the bolt release is to install I’m definitely going to buy one. I used to be very timid when it came to modifying my guns. But after swapping some triggers, springs or whatever I have become much more comfortable. One time it took me 2 full days with a hand file and a rubber mallet to get a Zenitco handguard and gas tube cover installed on my VEPR. Well it took that long to insure it was as snug as a bug in a rug and wasn’t going to walk out on me. It said “Some modifications may be required” my ass! It should have said hand fitting IS required. Whatever I’m happy with it now. Again good video.
@BattleBeaver5 жыл бұрын
Thanks for watching! Up here in Canuckistan (Canada), we can only have 5 rounds in a semi-auto rifle (or shotgun). I didn't like the "look" of the stock mag tube extension, I replaced it simply for aesthetics, so the stock spring stayed in place.
@frank45323 жыл бұрын
Great job 👏
@BattleBeaver3 жыл бұрын
Thanks!
@Kanooky_Jones2 жыл бұрын
Great video.
@BattleBeaver2 жыл бұрын
Thanks!
@sarwatahmed38504 жыл бұрын
Great. Vlog review !!
@willh2002 жыл бұрын
Great Video. I'm a lefty do you have a video to switch the safety to the other side?
@BattleBeaver2 жыл бұрын
No I do not, don't think it's possible to switch the safety to the right side. Thanks for watching!
@willh2002 жыл бұрын
@@BattleBeaver Thanks so much for the quick reply. FYI...I did find some info/video on youtube afterwards and you can change switch the safety to support a left-handed shooter. Great videos -keep it going!
@samuelcoles67917 жыл бұрын
truly a very smooth video ! would have like to see you lunch some rounds out that smooth Benelli 😋 I happen to be a knoxx brecher pistol grip man moss 500a1 pump. trying to save up for that smooth Benelli. never seen a knoxx brecher pistol grip on a simi.would that work? 😎 PS. thats one tuff ass Beaver !
@BattleBeaver7 жыл бұрын
Not sure if that would work or not. Thanks very much for watching!
@kerryflynn88788 жыл бұрын
Great video! Very clear thank you.
@BattleBeaver8 жыл бұрын
+kerry Flynn Thank you!
@MADMAX3536 жыл бұрын
Outstanding video sir....well done!
@BattleBeaver6 жыл бұрын
Thanks!
@alfredflores22042 жыл бұрын
Very good instructions sir. Will this also work for an M2?
@BattleBeaver2 жыл бұрын
Sorry, I can't be sure. I'm not familiar with the Benelli M2. Thanks for watching though!
@blt9819 ай бұрын
Just did my upgrades your a good gun brother for walking us guys thru it. I hate reading directions. Vid3o is my wo4k …tnx again from a 66 y4 old LE retiree who now has time to shoot his cool toys….wife just pop in my wo4k gun room to see if I was watching PORN…I SAID YES GUNNNNN. POOORRRNNNN….
@vrm10308 жыл бұрын
Great job!
@BattleBeaver8 жыл бұрын
+VRM Thanks for watching!
@jpooch009 жыл бұрын
Very well done vid. Thanks!
@BattleBeaver9 жыл бұрын
Thank you!
@shivutteshoyabutr85567 ай бұрын
Very nice jobs ❤
@BattleBeaver7 ай бұрын
Thank you! Cheers!
@Teleman015 жыл бұрын
Price goes up on these every year. But they don't fix all of the issues since it came out. Charging handle etc...
@williamchen80093 жыл бұрын
Did you find the larger charging handle hitting your fingers when releasing the bolt? Looks like the new charging handle is quite close to the bolt release button.
@BattleBeaver3 жыл бұрын
I didn't have that problem.
@MrMatts0768 жыл бұрын
The charging handle is made to remove the takedown pin for the trigger group. Read the manual!!!!!!!!
@BattleBeaver8 жыл бұрын
+Matt S Thanks, I did read the manual. If I had to field strip it away from my bench and tools, yes, use the charging handle. But I was at my bench and had tools. Thanks for watching!
@MaxMeridius09202 жыл бұрын
So that extension tube won’t take the 2 extra rounds - I realize you are restricted by law - but wondering if this gg&g extension works?
@BattleBeaver2 жыл бұрын
You're correct, here in Canada we're limited in the number of rounds in a semi-auto shotgun. I don't know anything about the GG&G tube extension, sorry.
@andreirodriguez88028 жыл бұрын
awesome!! thanks for the great video! now to find a vice LoL!!
@BattleBeaver8 жыл бұрын
+Andrei Rodriguez Thank you for watching!
@garygwd547 жыл бұрын
am thinking about getting the M4 and customizing it for deer hunting. would like to put on new forend for accessories i.e., pistol grip along with a red dot. we only use buckshot in the club I hunt with
@BattleBeaver7 жыл бұрын
Don't think you can go wrong with the M4
@GlobalCop8 жыл бұрын
fantastic instruction.
@BattleBeaver8 жыл бұрын
+GlobalCop Thank you, much appreciated!
@GLOCK_SLINGER_3420 күн бұрын
Much easier than tti
@paullavergne247710 ай бұрын
The. Bigger. Charging. Handle. Looks. Better. To lol
@andrewwalters1791 Жыл бұрын
Umm what about the spring catch/limiter? You’re still only going to be able to load 5 shells?
@DailyDoseOfCanada3 жыл бұрын
Hey do you prefer an aftermarket charging handle that can spin like the shotgun in the video or do you prefer a non spinning charging handle. Thanks for your time!
@BattleBeaver3 жыл бұрын
I have no preference, sorry, I know that doesn't help.
@stevensegal59588 жыл бұрын
Great video!!!!!!! Will I ever need to use the benelli wrench the gun came with?
@BattleBeaver8 жыл бұрын
+Steven Segal Thank you! If you're referring to the choke wrench, you'll need that if you ever plan to switch out the choke.
@therealkraka69836 ай бұрын
Hey so I installed mine but the button is kind of cockeyed and only pushes in from the front is there something I did wrong?
@BattleBeaver6 ай бұрын
That's strange, I don't know how that would happen. Maybe email GG&G to get help.
@VladPutinsDad8 ай бұрын
i purchased a gg&g bolt release and after installing i noticed that it only drops the bolt if i press down on the left half of the pad. (the side closest to the handgaurd). i was under the impression the bolt would drop regardless of where you press on the pad. is that normal? is yours the same way?
@BattleBeaver8 ай бұрын
Mine works pressing on any part of it,.
@dwforinash6 жыл бұрын
Did you end up having to put Loctite on it?
@BattleBeaver6 жыл бұрын
Yes, I put Blue Loktite on it. So far so good! Thanks for watching!
@inurfaceson97223 жыл бұрын
I purchased the same charging handle however it doesn't click in and keeps falling out.
@BattleBeaver3 жыл бұрын
Call or email the manufacturer, maybe you need a replacement.
@Happyorigins3 ай бұрын
how to you lock the charging handle ?
@bertraminc94124 жыл бұрын
Just buy a Titanium full length tube.... Ahh, Canada. So glad I'm still in the USA... for now!
@AutopilotAndChill4 жыл бұрын
bertraminc 922R regulations man. To slap in a full magazine, you have to change 3 total things to American made parts...
@VicsGarage716 ай бұрын
I was hoping to see the GG&G side saddle.. Good video though!
@SimplyKomplicated9 жыл бұрын
Just got my new charging handle and tac pad from GG&G and thanks to your vid I installed it perfectly. One question though: is the tav pad supposed to stick out slightly from the gun?
@XTrooper39368 жыл бұрын
+SimplyKomplicated If you think about it, the pad must be away from the frame for it to move when you press on it. If it were tight to the frame, there would be no room for it to move inward, and it wouldn't be able to release your bolt.
@SimplyKomplicated8 жыл бұрын
+XTrooper3936 Yeah I figured that much out after I sent the post. thanks anyway. And also, thank you for your courage.
@mashameri70193 жыл бұрын
I just bought the tactical bolt release and I tried to tap out the retaining pin but it won’t budge. Any suggestions? I don’t want to damage the receiver.
@BattleBeaver3 жыл бұрын
You could try a little gun oil, let it sit for 20 mins, then try again. You could also try a bit of WD40. Make sure you're using a punch that is small enough to fit into the channel where the pin is.
@whomagoose68975 жыл бұрын
If you live in a free and Constitutional state what is the maximum number of shells you can put into the Benelli M-4? Without installing some rediculous, long mag tube that competitive shooters use. Just a tube that is as long as the barrel.
@BattleBeaver5 жыл бұрын
Max capacity is 7 rounds I think. Up here in Canada though, we're limited to 5 rounds.
@whomagoose68975 жыл бұрын
@@BattleBeaver : Are ghost loads part of the "5 rounds" only? The ghost load is on the top of the lifter so it is not in the magazine tube. A similar government mandate is in the USA. Since the shotgun is imported it must be in what the ATF calls a sporting shotgun. Limited to five rounds. There is a list of parts that must be made in the USA to get a longer mag tube and the collapsible stock. The list of parts is called 922R list. The GG&G change to oversize bolt handle is one part you can change to a American made part. To allow for an imported original Benelli part. To get a Benelli collapsible stock you need two American made parts. Manufacturers know if the silliness of the ATF so all American made Benelli M-4 parts have the words "Made in the USA" prominently displayed so the ATF slugs can easily take notice. If all the required parts are exchanged an already expensive shotgun, $1800, becomes about $2600 per shotgun. Best thing is you can install all the parts over a long time. A pay as you go thing. Another example of rediculous government actions that only harasses the lawful citizenry.
@Mrpolobop2 жыл бұрын
Just one question when I place the bolt release button is it supposed to be raised a little on one side ?
@BattleBeaver2 жыл бұрын
If I understand what you're describing, yes, one side of that button should be very slightly raised.
@Mrpolobop2 жыл бұрын
@@BattleBeaver yes that was exactly what I meant really appreciate the response thank you
@darkstar90082 жыл бұрын
How did you get gg & g stuff in Canada?
@BattleBeaver2 жыл бұрын
It's been a long time, but I think I got them either directly from GG&G in the USA, or from ctcsupplies.ca/gg-g/
@lohoch55063 жыл бұрын
What is the stock you are using?
@BattleBeaver3 жыл бұрын
It's just the stock that came with my Benelli M4 up here Canada.
@MrDjversatyle6 ай бұрын
Please! Where can I purchase the stock bolt release for the benelli M4?
@BattleBeaver6 ай бұрын
www.gggaz.com/
@TheEpicDartfish4 жыл бұрын
You know any Canadian distributors that sell the IWC Multi Light Benelli M4 Mount? Trying to find any sellers that also sell it with the rail attachment version.
@BattleBeaver4 жыл бұрын
Unfortunately I don't, sorry.
@phatkd9 жыл бұрын
Could you post a like or something where you purchased your GG&G products? Wondering if you know of a Canadian supplier that stocks them.
@BattleBeaver9 жыл бұрын
I know of 2 Canadian suppliers that sell GG&G products. Not sure what their stock levels are right now, but you can check their websites. www.wolverinesupplies.com/ and ctcsupplies.ca/
@averageguy25253 жыл бұрын
Your trigger guard looks to be aluminum? Where did you find that?
@BattleBeaver3 жыл бұрын
It's just the stock trigger guard.
@MyJmba3 жыл бұрын
Where did you buy the mag extension for the shotgun M4
@BattleBeaver3 жыл бұрын
Sorry, I can't remember where I got it 7 years ago.
@df36247 жыл бұрын
Hello, I own a Versamax and I would just like the bolt release button but it costs ridiculously over $100... I haven't found anywhere that just sells the button, I'm pretty sure I'd be able to use the already existing screw in my Pro models button. Does the whole new mechanism really have a $100's worth effect on the gun? A lot easier to push or what? Just kind of confused about it because I honestly just want to obtain an enlarged button like this. Thank You
@BattleBeaver7 жыл бұрын
Sorry, don't have any information on the Versamax.
@df36247 жыл бұрын
Battle Beaver that's ok! I was just curious about you're install whether or not it was a big change
@BattleBeaver7 жыл бұрын
Yes, on the M4 is was a great addition!
@df36247 жыл бұрын
The latch was? Or just the button
@BattleBeaver7 жыл бұрын
If I could only keep one of them, I'd keep the enlarged bolt release button over the handle/latch.
@catholicforever7 жыл бұрын
I have a Benelli M1 Super 90, and just ordered these parts for it from GG&G. Are the internals practically the same for the M1 and M4?
@BattleBeaver7 жыл бұрын
I don't know, I don't have an M1, sorry.
@catholicforever7 жыл бұрын
Thank you for getting back to me. I ordered the same parts, and the internals were practically the same. This video was very helpful for installing these parts on my M1 Super 90 : )
@nz416510 жыл бұрын
Very good video with good instructions on installation. It seems that you've shot your M4 for many many rounds. I have a question with my M4 in terms of cosmetic damages inside rail, perhaps we can chat via pm? Thanks
@BattleBeaver10 жыл бұрын
Thanks for the comment, I appreciate it! Feel free to post your question here, it would be easier for me to reply. Scheduling time for a private chat would be difficult for me.
@nz416510 жыл бұрын
Since you had a dental mirror for inspection, I was wondering if you were able to look up the rails on the receiver where the bolt goes. The question that I have is if you've seen any degradation with regards to normal wear and tare. The reason I'm asking this question is I've brought a brand new benelli m4, and after my first 100 rounds I noticed a streak mark on the inside of the rail. I've contacted the warranty and they said send it in, however the shipping alone would cost me few hundred dollars, therefore, I'm hesitant on doing so. If the wear is normal, then I probably don't need to send it in for service. Thanks
@BattleBeaver10 жыл бұрын
Ning Zhang I just had a look, there is some normal wear on mine too. I can't be positive, but I don't think it's anything to worry about. If it's not affecting the shotgun, ie: it's still feeding and cycling fine, I wouldn't worry.
@nz416510 жыл бұрын
I was initially worried since it's brand new, and it was having some cycling problems, but I assume this is part of the breaking in stage. I'll put more grease the next time I go out and hopefully I won't have much failure to eject/feed problems. Thanks for your help.
@jeffreyognibene69882 жыл бұрын
My latch pin wont come out and i have the right tool
@xjrob856 жыл бұрын
I have trouble pushing shells past the factory shell catch. Does the shell catch that comes with the GG&G kit make loading the magazine easier?
@BattleBeaver6 жыл бұрын
Not quite sure what you mean. Do you mean the shell stop? The follower? Either way, if the part you're talking about wasn't in my video, then I don't know if would make loading the magazine easier, sorry.
@Bushy_P7 жыл бұрын
Might as well just get the shorter barrel if your limited to 5rds
@BattleBeaver7 жыл бұрын
Up here in Canada, if the barrel is under 18 inches, the firearm is in the "restricted" category up here. That means the firearm must be registered with the Federal gov't. The M4 as configured in this video has an 18.5 inch barrel.
@andrewvu34957 жыл бұрын
Do you still have your crimped tube extension? I have the military le version that came with the plus 2 tube extension already and weird enough I actually like the crimp more. Any way I could get it from you?
@BattleBeaver7 жыл бұрын
Sold it shortly after I made this video, sorry. Thanks for watching though!
@andrewvu34957 жыл бұрын
quick question, during installation of the ggg bolt release, i did not have a punch and had to resort in using drill bits. well now that i realize how much easier my life would be with a punch kit i started looking on amazon but noticed that they all lacked quality. if you dont mind telling me what punch kit do you have? how much was it? and is it any good? thanks battle beaver! got yourself a subscriber here :)
@BattleBeaver7 жыл бұрын
It's been so long since I bought my punches, I don't remember what brand they are or where I got them from. Any local hardware/tool store should have a set of pin punches for under $20.
@stvnchng47555 жыл бұрын
I have a crimped tube extension. LMK if you want it still.
@lfcox56608 жыл бұрын
Do they make one that will work on the older SBE's ?
@BattleBeaver8 жыл бұрын
+Lf Cox I don't know, but you can check GG&G's website here: www.gggaz.com/