Bayliner VR4 Custom Trolling Motor Bracket Installation - for Minn-Kota Trolling Motors

[@rachelbills9904]

Love the "hang time" stress test. Cute kiddo! 😘 😊 13:04

[@ecesarchavez]

Very Nice Install! Thanks for sharing

[@MatthewsFabrication]

Thank you Greatly, I appreciate it. It's two boats in One, it's Awesome. Thanks for Watching~! Sincerely, Matthew

[@Estatesale-nd7ww]

Awesome bracket. I have a 2002 bayliner Capri 185 and want to install a trolling motor. How can I get one of these custom brackets for my boat. Thank you.

[@MatthewsFabrication]

@Estatesale-nd7ww Thank you Greatly for watching & commenting. I don't have measurements for other boats unfortunately. Sincerely, Sincerely, Matthew Matthew's Fabrication, LLC Disabled Veteran Owned and Operated #MatthewsFabrication #CheekRest #CheekRiser

[@jonathanpellow7836]

Like the custom mount, do you make the bracket for the 2023 e18 bayliner?

[@MatthewsFabrication]

Thanks for the question. I don't have the measurements for that boat.

[@MrBurnsAlgebra]

Great video. I'm very intrigued. I've been searching for months - trying to figure out how to mount a minn kota terrova 80 to my '06 Bowrider 195. I think I can manage cutting different curved supports to match the contour of my boat. Would you be willing to make the kit (minus the supports)? What would you charge? I'm also assuming that the mounting configuration for the terrova is identical to your motor mount.

[@MatthewsFabrication]

Hello, thanks for watching. I can make the top plate with the mounting holes, & I have extra hardware for bolting through. I called Minn-Kota personally & all their models have the same mounting hole spacing. Message me through my website www.MatthewsFabrication.com & we can talk about the price. Sincerely, Matthew

[@markemcatchem]

Do you have a bracket made up for a 2023 T22 Bayliner?

[@geoffshort4548]

Awesome! I have a 2004 Bowrider 175 with different curvature. What software would I use to 3d model mine? So frustrated!

[@MatthewsFabrication]

Not sure, I didn't use 3D model software.

[@tommytran5944]

can you make one for bayliner m17?

[@kennethpayne6210]

Could you make one for a Bayliner 185 bow rider?

[@andrew1112]

How did you make the vertical brackets to match the shape of the boat?

[@MatthewsFabrication]

@andrew1112 Lots of trial & error, test piece after test piece... ok one test piece & one final piece. I created CAD design & I had my CNC cut it out. What boat do you have? Sincerely, Matthew Matthew's Fabrication, LLC Disabled Veteran Owned and Operated #MatthewsFabrication #CheekRest #CheekRiser

[@andrew1112]

I have 2023 Yamaha sx190.

[@MatthewsFabrication]

​@andrew1112 Very Nice

[@brianlayman9440]

I have a 2019 vr4 how much for your custom mount. Thanks

[@MatthewsFabrication]

Thanks for the question. Please send a message through my website www.MatthewsFabrication.com contact us page & I'll let you know. Sincerely, Matthew Matthew's Fabrication, LLC

[@michaelforbes7305]

will that bracket work on a t22cc

[@rachelbills9904]

Thanks for the question. Every boat seems to have its own contours & curves. So I doubt it. But if you could make the side brackets or a way to hold the top plate, the Top plate will work for any Minn-Kota Trolling motor & I also have the bolt pattern for the Minn-Kota quick release kits.

[@gm1937]

I absolutely need this. How do I go about getting it from you and how do I pay for it?

[@MatthewsFabrication]

Sounds great. You can message me through my website www.MatthewsFabrication.com & I'll go over the details with you. Sincerely, Matthew Matthew's Fabrication, LLC

[@CareltonRiggs]

Do you make them mount for people

[@MatthewsFabrication]

Yes, I make the Mount for the Bayliner VR4 & Minn-kota trolling motors.

[@old57bowtie]

Can you make one for a 2016 Bayliner 195 deck boat?

[@matthew.angelsavala6767]

How can i get you to make one for my 1998 sea-ray boat ?

[@MatthewsFabrication]

Thanks for watching... I made sure mine was perfect before making the video. Checking the compound contours & lots of measuring. Bring your boat over, I'll take some measurements & make it happen. Sincerely, Matthew Matthew's Fabrication, LLC Disabled Veteran Owned and Operated #MatthewsFabrication #CheekRest #CheekRiser

[@RobertMoss-jp1nw]

I have a 2020 Bayliner Element e16 and want to install a Minn Kota trolling motor on the bow. Can you make a bracket for this boat? Thanks

[@MatthewsFabrication]

Thanks for the question. You can send a message through my website www.MatthewsFabrication.com and I'll go over the details with you. Sincerely, Matthew Matthew's Fabrication, LLC Disabled Veteran Owned and Operated #MatthewsFabrication

[@scottjolly8983]

I need to do a similar install for my odd shaped bow. How is that holding up to use?

[@MatthewsFabrication]

Working Great, catching tons more fish as well. It's like two boats in one. Still works great for pulling a tube with the main motor & the trolling motor does great Trolling at different speed & with Spot Lock. I highly recommend it. I'm creating a mount only for the 2018 Bayliner Element F21 & 2006 Bayliner 195. Both with the Quick Release Mount. Customers are creating the side brackets with pieces I provide to match their shape.

[@CJ-gh5wq]

Can you create a mount for a 2021 T22CC?

[@MatthewsFabrication]

Thanks for watching & commenting. I can make the top mount, but I don't have access to that boat to get the curves of the boat for the side brackets. I can provide rectangular blocks & info on how to get the angle you need for you to cut out the side brackets to match the contour of your boat.

[@michaelforbes7305]

@@MatthewsFabrication how much

[@gregnickerson3735]

I'm looking to do a similar project for my Bow rider. Do you have measurements on a 2012 bayliner 175?

[@MatthewsFabrication]

Thanks for the question. You can message me through my website www.MatthewsFabrication.com And I can go over the details Sincerely, Matthew Matthew's Fabrication, LLC

[@TheImportsRule]

Can you sell the file so i can print it myself?

[@MatthewsFabrication]

@@TheImportsRule Hello. Print what? Sincerely, Matthew Matthew's Fabrication, LLC Disabled Veteran Owned and Operated #MatthewsFabrication #CheekRest #CheekRiser

[@justinchang2003]

I sent a message trough your website for the custom made bracket, have you seen the message ? thanks

[@MatthewsFabrication]

Hello, Yes, yes I did. Just been very busy with my normal business, making Kydex Cheek Risers for Rifle stocks. Sincerely, Matthew Matthew's Fabrication, LLC #MatthewsFabrication #CheekRest #CheekRiser