BBS RS BUILD IN 10 MINUTES (FROM JUNK TO NEW)

I had these 4 faces of BBS RS sitting for almost 5 years and couldn't figure out what to do with them since they were so damaged. I had no parts with them, only the faces. I decided to start building them 6 months ago, acquiring parts, fixing the issues by welding and machinning to finally have my dream set of wheels.
Faces are RS043 (30 bolts)
Step up kit from 15 to 16in
Outer Lips are 16x0.5
Inner Barrel are 16x6.0
1/3 billet hex
New BBS logo
New Bolt, Nuts and Valves

[@dwantaylor704]

Outstanding!!!!!

[@shadowalker760]

Excellent workmanship!! Wheels look great! Pretty sure the face of the wheel goes in-between the barrel and the lip… unless you’re looking to fit skinnier tires than usual

[@bi0hazard6]

I liked the: BMW Cover -> Straight to trash XD Nice job.

[@AntoineMk1]

Ahaha exactement :p thanks!!

[@DuanDao]

Such a classic wheel.

[@samdub]

Absolutly stunning, work and finish!

[@charlesdurand1328]

Solide, je suis dans le processus de refinir les miennes aussi. Ton vidéo donne de la motivation à les compléter quand ça me rappel le produit fini!! Good Job

[@matz0rz4o8]

Damn I have the same color coming in Bmw silver with red and silver bbs cap .. can’t wait .. watched this a million times and good to know it will look good coincidence that I saw it’s also bmw silver

[@danskFF]

amazing work ;D

[@user-gq7kk2ql8x]

😍

[@FaUxBlOnD]

Beau travail Antoine

[@borisjeanne1947]

Magnifique !! 😍

[@makukhawheels4674]

Good 👍🏻 job

[@triandsafei332]

Super nice bro

[@lussierjulien2673]

Je suis sans mots mon gars .. wooow !!!!! 😈😍🤟

[@maverick4177]

Where are you? I need some BBS RS centre weaves welded just like that 😂👍🏻 good job

[@RoCcoThEbEaStQC]

C’estttt chauuuudddddddddd!!!!! ❤️‍🔥❤️‍🔥

[@darylmorse]

They look great, but I thought the centers were supposed to go between the halves of the rim, not outside.

[@ZeddZephyr-xj2cq]

I NEEEEEED to get a LIST of all these SweeeeT INSTRUMENTALS🤪🤪🤪like Gadt Daaymn

[@jeffcesbron7778]

🤩🤩🤩🤩🤩🤩🤩🤩🤩😍😍😍😍😍c est beau !👏

[@florianrazvan4777]

Interesant imi place, chiar dacă nu sunt de acord cu cârpeala sudură

[@charleslavoie1371]

comment passe de mag fini a 500 a de beau mag a 3000 belle job mon Antoine

[@NorwegianCarGuy]

Do you need some kind of sealant in between?

[@RA-uj3nm]

Do you give up any structural strength putting the centers in front of the lips rather than oem placement? Beautiful work 👍👍🍺🍺

[@RichDasix]

no

[@TBendez]

@@RichDasix Well, no to your no. You are now putting load on to the screws, without the support of the facias lip towards the barrel/rim. I believe most of the forces are going to work pushing the wheel out, towards the bolt heads.

[@kennethl2423]

I was wondering the same thing except about using welding as infill for the old bolt patterns. This is a good point though, I thought it looked funny but he's showing off his work by putting the centre on the outside so I respect that

[@KhameleonKoatings]

where/how did you order the rs centers like you did there >>? looking for a set of 15" bbs rs centers can you point me in right direction?

[@Rodman8500]

properly done sir!! 👍

[@your-wheel-center-caps]

protect your wheels

[@gabrielmontplaisir207]

Wowwowwowwow🌽👌👌🍺

[@seanstannard5853]

Could I machine these same rims for an 09 saab 9 5?

[@user-zs2ud6wc9k]

Ставил бы уже через переходники, заваривать и сверлить новые отверстия, ну незнаю.

[@Simon-op7qm]

Where did you get the barrels and the outer lip from??

[@AntoineMk1]

Srr hardware website

[@theowarmelink7347]

Isn't the outer lip designed to go on the outside? Isnt the bmw silver part supposed to be in between?

[@AntoineMk1]

You can do it both ways with that outer lip/inner barrel kit

[@theowarmelink7347]

@@AntoineMk1 Always thought putting the inserts on front was only done on 2piece (replica's) rims. Anyway is a creative way to change the ET-value and narrow the rims.

[@FaCh1]

Were did you find the new emblem?

[@AntoineMk1]

Check out Srr hardware

[@luisdelgado1356]

If you out the barrel then the face and on to lf the face you put the lip would look wayyyyy better

[@Stvenloag]

Auch y yo buscando esos en 5 en 100 para mi jetta Mk4 😭 y este los vuelve de 4 pernos nooooooo muy jodido asi

[@LittleliaExcision340]

Yes tgey r ik im crios wad using red

[@user-fx5cd4px3k]

no sealant?

[@AntoineMk1]

Of course, I just did not film it.

[@AntoineMk1]

Of course, I just did not film it.

[@AntoineMk1]

Of course, I just did not film it.

[@SaschaRoeder]

Das wäre mir aber zu gefährlich damit zu fahren.

[@bealzibub4002]

Nooooooooooooo, all that work then you surface mount them!

[@sh60guy25]

Same thing I was thinking!

[@crunchermuncher93]

Boring, same shit. Upside down looks alot better

[@joejones6968]

You do relies you built those together wrong? Terrible.

[@jackpalmer9066]

Never heard of high offset face mounted split wheels ??