Setting a pin time clock

[@bigbark4627]

OMG! Thank U, thank U, THAAAAANK U! 😍 Who else struggling like a muppet in 2020?! Lol

[@jonathanbaker3592]

Try 2021 😂😂

[@richardgilfedder2807]

I come back once a year to remind myself!

[@geobruv3649]

Try 2022

[@richardpartridge529]

You aint the only one trust me 😂

[@picklesoupcase]

2023!

[@ruthconnolly3726]

Who knew it was do easy. This gentleman explains it so well. Thanks

[@sandanista2002]

I would never have guessed this is how the timer worked if I hadn't watched this. Thank you!!!!

[@charlesmontagu1687]

This helped me as for some reason we didn't get the manual. Thanks. Much appreciated.

[@alexiareed6833]

Thank you so much. That was so helpful, Much better than the manual.

[@Cambsgirl00]

Thank goodness for this video! Now I know how to set my timer. Thank you for sharing.

[@arlandriasj]

Thank you! I recently moved into a flat with one of these and was freezing in the morning and when getting in from work but now it works

[@connormccredie6984]

Very well explained. Thank you. I fully understand it now.

[@Thekitten1608]

Utterly wonderful video, super easy to follow and helpful! Thanks :)

[@bigmatthews666]

Are you god?

[@lynnestowe9112]

Have you got to put the immersion switch on as well as setting the time on clock

[@MugOfHotTea]

Thanks for this. Was staring at the controls like a bunny in the headlamps - now I'm happy to deal with the timer.

[@abdurrahmanvlogs8856]

If u want hot water too come all the time then what do u do and how to do set the time on it!!!!

[@discovervipin1]

Thanks 👍 this video is a life saviour..

[@Mumbolian]

Very useful only my pins functioned oppositely. Pushing in sets it instead.

[@nyeh6162]

Was awake later than normal and realised the timer switched itself on when it shouldn't have. Didn't know why as i didn't understand the on/off mechanism. After watching your video I noticed a couple of the pins weren't in their correct position. Very helpful video. Thanks a lot.

[@Diogo_Capitao]

If you leave constantly on its that means that the on/off is operated by the thermostat?

[@andriusGNR]

omg didn't know how to use this thing in auto mode for 7 years so never used it timer! now I get it :D thanks

[@IanRM]

Many thanks. Been struggling with this clock for weeks. Now I see what I have been doing wrong. I hope.

[@alanpaul8139]

Thank you dude, you've rid my headache. Cheers.

[@gary9432]

Hi.I have set the clock as you have described.Will the tank heat up from cold ( even though I have set the timer to come on a few hours from now , but I can hear the tank is on.Is this ok ? have I got a broken timer ? or is there a sensor in the tank to get it up to temprature then it will cut off ?.help please

[@joswinnoronha1739]

Thank you for your valueable time dear

[@elma1807]

Thanks for the video. Very good explanation 👍

[@jfoote6107]

Thank you so much...........I could never work out the positions of the level for timer, off, constant! Great quick and very informative!

[@daniellawlor1874]

Very good clear advice. Thanks

[@wolesjabro8090]

if I may know is there a company importing tactlin 211.0 type grasslin products in Indonesia?

[@larawilkens]

Really helpful! Thank you! However, my inside timer time does not correspond to the outside clock time? So, the hands are at a different time than the time at the arrow. Can you please advise? Thanks in advance.

[@aniar.3314]

I don't have any advice but I have the same issue which I only just discovered!

[@emmagoodwin3470]

Straight forward video, easy to understand thank you

[@mikelohman9752]

Most excellent Video - I'd completely set mine back to front - now all ok

[@florida199]

Thank you , it works and is just what i wanted . Appreciated !

[@nimae.s1984]

after setting the time ,do we have to keep the main switch 'on' for the whole day.....will that consume electricity....

[@joey2q]

Thank you, now i feel more evolved

[@elricb3156]

Hi. Thanks for the explanation turns out I had worked it out and was trying to set it the correct way. The only problem is my centre clock does not match the time on the outer ring, the clock says quarter past two and the outer ring says seven oclock in the evening? also when I try to get the outer ring to the correct time it only goes so far then stops turning so I can't get it to the correct time?

[@Steveabbo]

Did you sort this?

[@gerredy]

You’re my hero and I love you

[@rememberedtoday2239]

Very well explained - Thank you.

[@imresovago2089]

So if its on 1, it means the heating is on all the time, doesnt matter the pins positions, yeah ?

[@alessandroalfi1181]

Thank you, it's been useful for me

[@abidaparveen958]

Oh my days. Just realised I've had my timer all wrong and the heater on all the time, as I've never had a water tank before. My bill was astronomical for one month hence why I'm checking everything. Many thanks

[@rrrrmcg408]

saved my life haha a was absolutely freezing 😂 thanks

[@Lolcoss2]

Saved my life mennn thankk youu

[@gs-gg3vl]

great clip for training - how to set timer. thanks for your efforts

[@dontforgetthegame]

Thank you. Was completely baffled by it.

[@Ash522MX]

I don’t get why my garage door down lighters which thisncontrols have gone dim now 🤦🏼‍♂️

[@CristianVargas-eo8sg]

Donde puedo conseguir este vieeo en español???

[@enriqueaguayo500]

thanks very easy to follow instructions

[@fir8550]

Very good tutorial. Thank you.

[@LukeTomsett]

So does the clock turn automatically as time goes on?

[@grahamkenworthy3189]

The instruction booklet on setting the pin timer on our new Netta oil-filed radiator are in pigeon English(ish), brrrrr...but, now I understand! Thank you so much!

[@vnought]

LIFE SAVER! Thanks so much!! :D

[@mandyxx4621]

Also lap instructions say presee all pins out then push down for times but all videos have all pins down and pins outer edge for timer I'm confused

[@HemIock]

My manual says push sigments AWAY from the centre to set the ON periods. The way this guy is setting the time matches the manual. I came hear mainly to check how to set the time. I thought I had to move the physical hands of the the clock! I will put my immersion heater onto a timer instead of having it on all the time. I cannot afford the HUGH electricity price charges anymore and I have electric heating. I have turned most down to 16 degrees from 20. It's a bit chilly now in the house sometimes.

[@Highlander1518]

Thanks. Just bought a new house that has this timer linked to outside spotlights. I didn’t want to waste electricity so I located the timer and turned it off.

[@bbkoster76]

Very useful illustration thank you!

[@NewEndProductions]

do you have a wiring diagram for this timer?

[@vb8682]

Hi, I have a problem with this kind of timer. it wont spin! Any idea how to fix it ? Thanks.

[@mattscantlebury4566]

My inner clock and outer timer have become out of sync. Any idea how to sync them back up again ??

[@septemberblueuk]

Great video, very helpful!

[@yasnaarias8478]

Hola soy de Chile me encantaría que estuviera tu video en español por favor

[@rebeccacupani8583]

Sorry but I can't fund some video of explanation in my language and this video its been veery good for me but i didn't understand what's the reason for the little clock in the middle?

[@gabedraper7594]

Thanks, 100% usefull video..!!

[@redoano]

Great vid thanks. I have one of these in my apartment which I just bought and I just could not understand how it was supposed to be used

[@mandyxx4621]

My led light won't come on, override no light either, I can hear it clicking but no led light so not working

[@emerpe590]

Thank you for explanation. 👍

[@karinapatel3596]

Does anybody know the reason why the time on my clock keeps slowing down? Do i need a new clock? Thanks

[@fazq356]

Thank you, you're a star xx

[@김진수-q1p]

구매할수있는 링크부탁해요

[@cathythomas5788]

My clock hands in the middle don't match to the 24 hour time on the outside. Help please.

[@adekunlemaryam1580]

Please did you find a solution?

[@tizanaizit7946]

Why mine still not working 😵‍💫

[@dianeharrison4975]

I don't wanna sound thick but how dya know which is am n pm? Thanks

[@reprovoa2408]

Diane Harrison 13 1pm 14 2pm 15 3pm And so on.

[@cloruske]

Thanks..very clear ..great help

[@ravijangid126]

How to make power on off 5,5 minit timer switch

[@rameshreddy2583]

Thanks a lot it is very helpfull to my life

[@TheOnlyTata]

Thank you. Now my electric bill should go down lol

[@gary9432]

Brilliant ! thank you :)

[@mclarenrob2]

Just found out a timer on a water heater of ours has been on all day but off at night when the electric is cheaper 🤦‍♂

[@matthewbiermann8461]

Love you man

[@tizanaizit7946]

Why mine still not working 😵‍💫I did all the steps and still not working 😮

[@mrblue4233]

Mine stop working last week all you need is the clock it will work

[@KaptainKlunk1]

brian in the name of sweet fuckin jesus,,,open that top fuckin button,,,,keep er country,,,

[@LifeOfPabs]

LOL

[@donna3188]

Very good instructions. I still had to study "military time 24 hours" to get the hang of it.

[@wism881]

Made moving to Ireland a little less fiddly!

[@nats891]

How do you adjust the temperature in the house? Where would usually the room thermostat be? If the boiler is in the attic, would the thermostat be there as well? I can't find it anywhere in the house. The house is super cold, even though the oil heater is on... Frustrated and cold. LOL

[@techtinkerin]

Helpful 😁❤️

[@ruchirucollections9098]

my clocks don't match up, can anyone help pls

[@sabarishmv8603]

Ruchiru Collections same problem here

[@cardinalargie]

Cheers, Brian.

[@YunusCars]

❤thank you

[@John-ob7dh]

I had really strange prob .The old mechsnical timer died .So i fitted a new mechanical timer .Set the inner clock and outer clock same time and chose a 4 am push in segment 2 hour on setting . Next day at 7 am i looked at it and the clock had stopped at the 4 am setting and stsyed at 4 am with no turn on .once i pushed the outer clock past it to correct time of day ,the clock worked perfect .BUT no matter what time set the on for it would not go past the on setting. I fitted another new clock and it did exactly the same.Took both clocks back for refunds and fitted a timer boost switch which works perfect . No one has the answer why 2 new mechsnical timer clocks would not work .Arghhhhhh

[@deet1558]

I fell asleep during the vid and banged my head off the timer and broke it

[@amesmerisedbeing]

It was great. Thanks

[@MichaelBroadPicturesofCatsorg]

Good work.

[@bdsharma4870]

Sir Hindi me batay ki iski connection kaise hota h

[@noursaad8554]

helpful for me , thanks a lot !i

[@leonelricon5433]

span plis.

[@Ink2Screen]

Thank you so much!

[@olivermoore4898]

What a g life saver

[@thomaspurvey]

Excellent.

[@ilyasads7]

THANK YOU SIR

[@adidas2066]

Thank you

[@ludmilajesus]

Very helpful

[@abeerakel742]

MilaJ16

[@redtape9484]

Oh my gosh thank you

[@adekunlemaryam1580]

Who else is facing the issue of their clock not working?

[@bigmatthews666]

You need to calm down

[@jurispikelis9159]

Thanks for info :)

[@srinuponnada2813]

Super.videos

[@BrianWalke-rg1ck]

It's my credit I need to add

[@bjarnetungland4544]

Many thanks