Cummins Swap the Hyster Part 9: Fuel Injector and Lines Install Plus other Accessories Hookup

In this video I install the fresh reconditioned fuel injectors back from area diesel. These are 480hp marine injectors so the largest ones stock they made for an 8.3l Cummins 505cid. I also get the turbocharger oil feed and drain lines installed and the air compressor cooling lines all hooked up. Follow along as I do the last assembly before first start!! Will this pile of reclaimed scrap run??

[@levitated-pit]

another quality saturday evening (alongside Abomb, Steve, Quin, Stephan etc etc) video to compliment my beer!

[@bcbloc02]

Great group to be included in!

[@PhilsProjects]

I smell some video trickery going on here... you used antiseize and didn't get it all over yourself. something aint right there, lol fun video Brian, I cant wait to see it running

[@ypop417]

I was thinking the same. My hands and clothing are covered every time I use it.

[@phlodel]

Use anti seize on the job, get a little on your shoe. Stop at the grocery store on the way home, tomorrow it's in Tokyo.

[@etheroar6312]

Black asphalt roofing cement does the same thing. Nasty stuff

[@bcbloc02]

With the dirtiest hands on the internet no way you can tell about the anti seize. LOL

[@lewiemcneely9143]

@@bcbloc02 I'm that way with whatever I'm doing.

[@jamesmorris3175]

“It’s better to be looking at it than looking for it” works just as well for power in a machine as tools on a truck :) Next video is going to be exciting.

[@Watchyn_Yarwood]

"Better to have it and not need it than to need it and not have it"! First time I've heard someone say that in a long time. That's been my 75yo life mantra .

[@bcbloc02]

Words to live by...................... :-)

[@jonpardue]

Good deal on the fuel lines, and interesting to learn the injector details. The Hyster will be transformed soon!

[@AmateurRedneckWorkshop]

I am sure we are all eager to see it run. Then we want to see it in the forklift.

[@bigun447]

Fred is a great guy. My bride and I were glad to have met him. Great video Brian!

[@bcbloc02]

For sure!

[@wymershandymanservice9965]

Great 👍 content coming along great.

[@jh1867]

Really love this build !!!

[@phillipjones3342]

You got it going on congratulations ready for the start up thanks for sharing Brian

[@smalltownmachineshop6860]

One step closer, very much looking forward to seeing it up and running

[@clydeschwartz2167]

Excellent video keep up the good work it will be nice to see it running

[@FishFind3000]

That’s gonna be one fast forklift.

[@coldwarrior23]

I ran a Hyster fork truck for years, they are bulletproof!

[@samrodian919]

You're making good progress Brian, we can't wait for the first startup of your monster Cummins creation!

[@SkinnyBiker]

Looking good!

[@kimber1958]

Good stuff Brian,

[@jdmccorful]

Great job Brian.

[@bcbloc02]

Thanks!

[@TomChame]

Another good one,thanks.

[@steveschumacher5470]

thanx for the video Brian

[@davidfraser4830]

It looks like that step went smooth as hell. Its always nice when that happens haha

[@bcbloc02]

Yeah, nice to not be fought the whole way!

[@dmadere1]

Lookin good my friend!

[@lewiemcneely9143]

Looking plumb dieselish! All you lack is finishing and that's not far off. I thought I heard Baily but with you in a jacket he was probably on the couch dreaming about chasing something. Good oil pressure. My 4.3 pegs the gauge with the Delo circulating through it at 195 degrees on idle. Good stuff. Remain calm and BLESSINGS 2 yall!

[@ypop417]

50 psi Oil pressure Looking Good Brian!

[@10swatkins]

Brian said " It's over kill"... That is the understatement of 2020! HE is going to end up with a 200 MPH forklift!

[@fowletm1992]

Hits a bump Blips the throttle Hister trans be like ima outta here

[@10swatkins]

@@fowletm1992 I hear NASA wants to borrow it... Put a rocket on the forks and lift it into space!

[@jimpritz4169]

Thanks Brian can't wait to hear this beast running. How's a young feller like yourself know so darn much about everything?

[@bcbloc02]

Easy I have done most of it before. :-)

[@bulletproofpepper2]

Thanks for sharing. The return line coppers had a old set put in a refurbished engine leaked fuel.

[@bcbloc02]

Yeah they pretty much a one time deal for sure.

[@frednewman2162]

Glad they got to you OK (delivery not a given anymore) and they worked out for you!

[@bcbloc02]

Fit like they were made for it!! Thanks!

[@krazziee2000]

very nice,, getting close.

[@tomkrause62]

We had I think a 50K extendable wheelbase fork lift come in at work moving some punch presses. Not sure what it had for an engine, but it shook the ground like a locomotive when it revved up. It squished water up through the seams in our driveway when loaded.

[@ypop417]

I supervised 2 moves like that. One from one bilding to the next the other all equipment out of the build shutting down.

[@landerson1012]

Making good progress. Curious to see how long it will take to bleed the fuel lines.

[@outsidescrewball]

Enjoyed

[@KG-yn9qi]

Hi Brian! (No miss spell type-0 sorry) Viewer Fan here! Can not wait to here it, hope in next video and not two/three later! So with all that HP you can use as a stump puller, trailer tow, pull starter, do burn outs, get-a-way vehicle.. Ha Ha

[@argee55]

It’s getting close now.

[@keith73z28]

Hell yes!

[@Pavinsteelman]

We have 2 of the forks one has a4-53 Detroit other one I don’t know .

[@WilliamTMusil]

Hiya Brian

[@jayminor9757]

i’m laughing a little bit here. When you put the torque wrench on the injector hold downs it looks like they each moved just a little bit. This is a good indication of having a well calibrated arm on you. Carry on sir. Your videos are most enjoyable.

[@charlescartwright6367]

Aloha Brian, Did Bailey put his wag of approval on this?? I have grown to accept his wag of approval. I see so many wipe bearing surfaces with oil and NOT pressure lube an engine, and I like the see the engine crank to do this it proves so many things and is thorough. I'm looking for smoke out the exhaust! Thanks for sharing.

[@bcbloc02]

He came by for the startup. For the most part Baily doesn’t like being on concrete anymore. Poor old thing. 😭

[@jimsvideos7201]

Antiseize is like a torque wrench: Maybe you don't *need* to, but you really should. (Yes, there are exceptions for antiseize, I know.)

[@bcbloc02]

Were you using the copper or the grey?

[@Rx7man]

@@bcbloc02 I always use the copper.. I curse people who don't use any on farm equipment.. things that touch the dirt tend to rust like a sumbitch

[@TheBlkac1]

I wish I could have you take a look at my 2000 Freightliner FL70 with a Cummins ISC 8.3 It doesn't seem to have any power at around 2000-2.5 rpm

[@bcbloc02]

Checked your fuel pressure? Low pressure will cause a noticeable performance drop as rpms increase.

[@phlodel]

I'm guessing you'll be able to use the forklift hydraulics at idle without stalling, regardless of the load.

[@bcbloc02]

That is the idea, no more pull the side shift and kill the engine.

[@bigcountry9957]

Brain I couldn't help but notice that it appears you may have done a little welding while wearing that jacket.. I have some from the same designer...lol

[@bcbloc02]

It has been on fire a few times, grinder spark damage as well!

[@bigcountry9957]

@@bcbloc02 haha... i understand

[@dmadere1]

Bring that motor to me I’ll make it look pretty like my Axelson! Lol

[@bcbloc02]

Think I can paint it here for less than a trip to Texas but thanks!

[@dmadere1]

@@bcbloc02👍🏻😁

[@dmadere1]

@@bcbloc02 actually was trying to get you to Texas to weld the broker corner foot on the lathe!! 😜

[@jerryglen986]

Brian put that Cummins in the farm truck😎It would be a farm truck with a Cummins 🙄

[@bcbloc02]

Technically think I already have a Cummins powered farm truck 🤠

[@222foxracer]

What’s the part number for those injectors? What pistons do you need to run those

[@bcbloc02]

I run the big bowl industrial pistons. I don’t remember the injector part number as I have had them 20 years. If you call curtis at area diesel in carlinville Illinois he can probably look up what they were from when they serviced them.

[@rgmoore]

I didn't see Bailey approve of this work. I think you are going to be in trouble.

[@waldsteiger]

do you have a goal et for the 1/8?

[@bcbloc02]

About a minute. Lol

[@waldsteiger]

@@bcbloc02 i would watch every 60 seconds of it. first record=world record, just sayin.

[@paultavres9830]

You over hauled the engine but left the old freeze plugs in the back of the head that ive seen rust out on a few 8.3

[@bcbloc02]

The head appeared to be recently remanufactured. No signs of corrosion.

[@pontoonrob7948]

I'd like to send you something as a thanks for all the videos. What do you need in th $50-75 range. Sorry I'm cheap but I dont make a whole lot...we might could just send some money but I dont know how to get contact info safely in the comments.

[@Rx7man]

if you click on his channel, then go to "about", you can find his email

[@bcbloc02]

I appreciate the gesture but if you don’t make a whole lot keep your money for you and your family. I work enough to get by ok. Just recruit people to subscribe and watch the videos is good enough. 😎

[@ShainAndrews]

Did you have Area adjust the governer on that pump? Get the ol girl turning 5-6k? Start a new pulling class.

[@bcbloc02]

No I think it only turns 2800 best I recall where they set it.

[@ShainAndrews]

@@bcbloc02 LOL. I was kidding around with you. Figured you could make the first Pro Stock Forklift class.

[@mrbuck5059]

18 ft pounds. Ok. Thank you.

[@isbcornbinder]

I used fast-forward and made a 4 minute interesting video out of 12 boring minutes.