Harley Custom Auxiliary Lighting Kit 67800366A 2019 Street Glide Special Touring

[@randysheckler8793]

The Greatest video of all time. Reviewed it 2X ..... then proceeded to do the complete install in 90 minutes + 2 Coors Light! Excellent job friend.

[@BeardedTeslaGuy]

See, you had the process down pat!

[@CelticMotorcycles]

Just had one of these roll into the shop. Couldn't see an issue with the wiring until I found your video and realised the switch hadn't been installed by whoever fitted the kit! Thanks for the vid, bud.

[@BeardedTeslaGuy]

Cheers

[@timothydavis-fg2bs]

Finally someone doing what I am going to do Thank you for providing this information

[@BeardedTeslaGuy]

I got you

[@mikepsl1519]

Just an update, for anyone that is planning to do this upgrade. I ordered and installed this kit part #67800367A, yes it is a different number but the only difference is mine is chrome not painted black. It appears Harley has made this a little easier now by grounding the passing lamp to the housing of the lamp which in turn grounds through the frame. I was not required to splice the ground of the lamp to the ground of the turn signal/run light which simplified it significantly.

[@sparkdman1]

Great video, I just bought the same kit for my 23 street glide. You just saved me a bunch of money at the dealer.

[@M_J_Glide_22]

essentially what you did with those black wires going into the cap was join the two light grounds, slipped over the but connector and then added in on the other side a pigtail....so 2 into 1 going out into the clip connector.

[@brianhoneycutt6431]

Thanks for the video, I just installed the bracket kit from Harley and a three set led light kit, on my 2020 Street Glide Special. Your video made it so easy to do, it took me the most time assembling the lights to the bracket, works and looks great.

[@BeardedTeslaGuy]

Nice

[@thedakotahurley]

Great video! Straight forward install. One of my favorite things about Harleys is they’re so easy to work on. Like a grown man’s lego set 😎

[@BeardedTeslaGuy]

100%

[@LSHD254]

thanks for the detailed walkthru now i know exactly what to expect in some fashion when i get my lights in tuesday will def refer back to this vid

[@fader2701]

thank you for the walk through, used this for my install. took 3.5 hours. thank you so much

[@jarhead3121usmc]

I also found a 9/16 Memphis Shade socket that has a cutout for the wiring just so you can adjust the lamp location. Found it on Amazon and will let you know how that works!

[@BeardedTeslaGuy]

Worth it!

[@PaulLeBlanc4u]

What a great explainer video. 👍👍👍 just got my lights today. This helped a lot.

[@BeardedTeslaGuy]

Cheers

[@sands1003]

I was a little scared to do it buy myself but you made it look so easy. Thanks

[@BeardedTeslaGuy]

It’s so much easier than you’d think.

[@YahwehmyKing22]

Thanks SO MUCH for this detailed video 🤝🏼🤙🏼

[@BeardedTeslaGuy]

No problem 👍

[@daveym2828]

Excellent video. Used your last one to add my heated seat. Keep it up!!

[@BeardedTeslaGuy]

David Moore I appreciate the support.

[@mikepsl1519]

Thanks for the video, now that I have seen your video the instructions make sense. I have not done this yet and I have a question for you. Do you know if the black wire you splice into the other black is a ground? The reason I ask is, maybe a separate ground wire could be added and passed through where the connector comes out from the bike? I hate using butt connectors and clearly there is not much room for error when splicing. BTW, Good video and explanation. I may just pull off a turn signal and check this with an ohm meter.

[@creade3783]

Are you aware most street glides have an aux switch in the dashboard under the ignition switch? Under the seat, in front of the battery is a 4 pronged Deutsch connector that is connected to the aux switch in the dash panel. This switch and connector can be used to operate after mkt passing lamps.

[@BeardedTeslaGuy]

Nice

[@bobscarcolor]

Great video I have a 2017 CVO street glide and just finished the assembly and I didn’t get to swap out signal led yet Does the sockets that come with the kit fit the stock led bulbs when I take them out ? Any help would be greatly appreciated thank you

[@creade3783]

Much easier on the newer models than older ones. Have to remove outer fairing on 2011 Street Glide to connect passing lamps.

[@BeardedTeslaGuy]

thanks for sharing.

[@Rvzoo310]

Great Video! Detail of install was on point! Thanks.

[@BeardedTeslaGuy]

Cheers

[@josephcasha5937]

What aftermarket light bulbs did you use . The only one's I can find are 4.5in will they fit this light kit. Harley Davidson are selling 4in so I'm confused it the 4.5 will fit . Thank you for any info you would provide. Like the video.

[@raffeal247]

Damn that look good! Great video!

[@BeardedTeslaGuy]

Cheers

[@valentinofuerte]

Great video - good instructions- just completed the install - ty

[@BeardedTeslaGuy]

Cheers

[@kazzazzabikozaiyo682]

Thanks for the video. Wish you have a video on a 2020 street glide on auxillary light. I bought a kit at ebay 4.5" Passing Driving Spot Fog Turn Signal Light Bracket Fit For Harley Touring but I do have trouble with the passing light. Lights won't lit except for the auxillary ones. I soldered and connected the 3 wirings but it's not working. Any idea how to fix this thing. Thanks and much appreciated.

[@BeardedTeslaGuy]

cheers

[@firemen812]

Thank you for this video I’m installing on my street glide

[@BeardedTeslaGuy]

Welcome

[@jarhead3121usmc]

Thanks for this vid! Adding these on my 18 CVO Street Glide, and this was very helpful. Just an FYI, but that extra wiring step is only for the black housings, not the chrome ones. Not sure why, but my chrome ones don't have the extra wire, and the instructions specifically state this extra step for "black housings".. weird. Thanks again!!

[@BeardedTeslaGuy]

No need to make sense for Harley accessories lol. Silly

[@johnsica4640]

Cant ground wire on power coated parts

[@ghostghost6268]

Thanks bro.....I was puzzled by the missing wire from the passing lamp

[@bj6119]

GREAT VIDEO . BEST INSTRUCTIONS !!!!!

[@BeardedTeslaGuy]

Glad it was helpful!

[@raymondraymondjr6463]

Nice video thanks .. which size or brand did u get for the fog lights ? Don’t wanna spend an extra 400 for just two lights

[@BeardedTeslaGuy]

Bought knock offs on Amazon

[@vintagetrk]

I have a 2019 Street glide bought the kit but.I dont have this mysterious black wire to connect???????????

[@geovannyespana6938]

awesome video! Have a question do you still have your road king? I ask because I want to add these passing lamps to my 2020 road king special. And I wanted to see if you knew how the wiring goes. Thank you for your help. ride safe!

[@BeardedTeslaGuy]

Don’t have the king anymore but I am pretty sure it wires up the same. All you need to do is add a switch.

[@geovannyespana6938]

Rocketman hey thanks for replying! Yes the wiring is pretty much the same where i get stuck on is where to hook them up to. On ur street glide. It has a connector already because u had turn signals. So i need to figure out where to connect them to and where the switch goes connected to as well. I didn’t find many videos on it and the ones i did find showed everything up until the actual connections lol. Thank for replying though. If u have any info on that it Would be much appreciated. Thanks again and ride safe!! I watched ur videos and they were thorough so that’s awesome. Keep making them.

[@BeardedTeslaGuy]

Keep digging, and look at the HD forums at that part number in the ROAD KING SPECIAL thread. There are a couple guys that have done it on the Road King Special. I was planning to do it on that bike before I got the SGS.

[@geovannyespana6938]

Rocketman cool thanks man. Appreciate it. I will. Ride safe!

[@touchpointpropertymanageme2889]

I was wondering the same thing. On my Roadking Special, I would be running this kit along with the stock bar turn signals. That means I would have double-turn signals. Should I just get a splitter for the turn signal plug so one goes to the kit and the other to the bar signals??

[@smarttfirearmsinstruction5924]

Good day, did you choose the left switch or is that the side that has to be used, also does the ignition go back in by holding the pin on the bottom and turning to the right?

[@justocruz7479]

Thanks for the great video. Can you provide the link to the bulbs you bought for the passing lamps on amazon?

[@BeardedTeslaGuy]

Here you go amzn.to/3KS8UM3

[@flavirufus]

Now this was a great, great video! This is the way to do it. Installed my lights tonight following it. Perfect instructions Only real problem I had was trying to get the wires to lock somewhat into the connector. They just didn’t really catch. Ended up taping everything together and it naturally applied pressure to keep it together. Went to a few stores to grab a 9/16 spark plug wrench, but nothing like that in town. Ended up using a long socket with vice grips. I ended up with four foam strips. Nowhere in the instructions did it say anything about them. Did you use them?. Thanks again for the great video!

[@BeardedTeslaGuy]

I’m glad it was helpful. If you just follow Harley instructions, you’d be lost!

[@flavirufus]

Bearded Tesla Guy What did you do with the extra foam pieces? When you put the wires into the connector, did they grip or not really?

[@crazylouie68]

flavirufus i never used the foam strips on mine, seems to not be a problem

[@throyTube]

Man you're really helpful and keep it up!! I have a 2020 RGS, I'm wondering where to get or part number of the "Lamp Logo" Auxiliary Switch cause I just found an ACC switch not the lamp logo! thanks!

[@BeardedTeslaGuy]

Throy part number 69200172 is the part number I think you are looking for. Just make sure you are sitting down when you look for it, it is properly Harley priced. That is the switch pack with the button.

[@chrisrocker1108]

Great video man. I’m installing after market passing lamps on my 2020 SGS but I’m wondering if I can use the Auxiliary switch I added instead of buying another switch just for the lamps. And, did you have to wire anything in to the 135B plug?

[@BeardedTeslaGuy]

Yes you can use a switch of your own instead

[@jjbaggins57]

Is there anyway to adjust these up or down ?? There is no ball for the top just the isolator . Everything is flat that it sits on

[@avitecae]

Hi!, thanks for the video. One question, are the standard indicators valid for install them with the kit or is it necessary to also buy them with the kit? Regards!

[@BeardedTeslaGuy]

Standard turn signals mount up to these just fine.

[@twiseguy13]

Great video! I'll refer to it when I do my install after receiving the kit. Do the aux lights stay on with the high beam? I've seen videos of Ultras that don't keep the lights on when switching to high beams

[@BeardedTeslaGuy]

Lights do not stay on with high beam.

[@mikemitchell8220]

@@BeardedTeslaGuy Harley sells an Independent Control Aux Lamp Wire Harness Part # 69200441 for $30 to keep your passing lamps on with your high beam headlight.

[@ericortiz6869]

Mike Mitchell doesn’t fit 2014-present

[@crazylouie68]

Hey bro, video helped alot. Got lamps working fine. Super bright. My right front signal light isn’t working, what should i look for with the connection ? Any certain wire in particular that i may have messed up ? Thanks

[@jarhead3121usmc]

Check the purple or brown wire going into the connector..

[@rainerlucas9240]

Hey man thx for the video. Quick question what lamps did you ended up buying from amazon? Im a little confused. Are they 4.5 or 4 inches? Thx

[@BeardedTeslaGuy]

4.5 inch SKUNTUANG 1 Pair 4.5 Inch Fog Light Passing Lamps DRL bulb for Harley Davidson Daymarker Motorcycle Fog Lamp (Black Fog Light) www.amazon.com/dp/B07BF7FW7J/ref=cm_sw_r_cp_api_i_G7UVEbQR 29YV9

[@rainerlucas9240]

Thank you so much.

[@Cabinetgod1]

So I was going to ask the same question why is it that Harley calls it out as a four-inch bulb but everybody else makes a 4 1/2. Are they the same? Harley is just measuring differently?

[@jonathanschmadeke3836]

perfect! thanks for sharing

[@BeardedTeslaGuy]

Thanks for watching!

[@brentclingingsmith9809]

Maybe I was told wrong, don't you have to have the bcm reprogrammed? I have a 19 sg and thats what a harley mech told me. Just curious since video dint say anything about that

[@BeardedTeslaGuy]

I didn’t have to do anything special

[@nizamjusoh7459]

I bought after market housing for harley street glide driving light (chrome). Why i can only see 1 wire (red) coming out from the driving light housing? I plan to re-use the existing wiring for turn signal. Appreciate your help

[@llembcke]

you mentioned at the beginning of the video that you were putting in aftermarket driving lights. HD description for the hardware says it's 4". Does it fit standard 4.5" driving lights?

[@BeardedTeslaGuy]

I can’t remember

[@rhemo6322]

I went through the entire process and neither the lights nor turn signals are not working on my 2022 FLHXS. Switch lights up and the regular stock turn signals/running lights work fine when I reconnected them with the switch still installed. The switch on or off has no effect on regular stock turn signal/running lights. Any ideas? Thanks for the video. UPDATE: I realized that I had not advanced the ends of the wiring all the way into the 4 way socket housing. Working fine now. Thanks again!

[@darencouch3643]

did you get it working?

[@ZacharyLatter-r4c]

I don't know what I'm doing wrong. The turn signals come on, I've followed your video, and the aux lights won't come on.

[@253poncho]

I purchased the auxiliary power switch kit for my 2020 street glide. However the switch is for the right side button pack. Will this still work or does it have to be on the left side. Can’t find answers anywhere

[@BeardedTeslaGuy]

Pretty sure it has to be the other side. You can always plug it in and see what happens

[@253poncho]

That’s what I thought but every Harley dealer I’ve talked to said I have the right part. So I’m just confused and I was told if I install the part I can’t return it. So before I go and install I’m trying to find a for sure answer. If that makes sense

[@253poncho]

@@BeardedTeslaGuy so I was able to get it figured out got everything pinned like you said. Aux lights work. However now my led turn signals are on like running lights and when I turn in the blinker it doesn’t blink it acts like a bulb is burnt out but when I test the light with a 12v running lights and turn signal work

[@UltimateDog1971]

Why do you have to remove that front facing cover/panel? I had the inside one removed once without doing that. Is there another reason for removing it?

[@BeardedTeslaGuy]

Pretty sure if I remember it was the only way to reach the connector

[@crazylouie68]

How’d you get those housing lamp wires thru the lamp bar ? Seems like they both won’t fit thru

[@BeardedTeslaGuy]

They fit through just fine, no issues at all.

[@crazylouie68]

Hey guys, can those plastic pieces you put the black wires in be heat shrunk ? I ‘m having a hard time keeping them inside. My right signal light isn’t working..... thanx

[@howardstumpf8787]

Looks like Plug and Play! Once the button is plugged in you're good to go?

[@BeardedTeslaGuy]

Yep!

[@johncosta2895]

I watched your video. I appreciate it. Worked out well. I have noticed that the auxiliary lights only work when it’s in high beam. Is there something I did wrong? Thanks again for your help.

[@bobsciullo5577]

This is a really great video. My issue is that I only have one gray wire dropping from the can. I cannot figure where I am supposed to be splicing any black wires two in to one. Black wire in the can goes to chrome. I know I have something incorrect as I don't seem to have power to the passing. "16 SGS

[@BeardedTeslaGuy]

I wish I knew

[@cameronbartley6139]

That was a cool video .

[@dustykerr8737]

Thanks man.

[@BeardedTeslaGuy]

Cheers

[@brandonfrick807]

Why not just pull the wires back just enough to tighten. Worked well for me.

[@ltvuong1]

HI, I was wondering what size passing lamps did you get? Most of what I'm seeing aftermarket is 4.5", and Harley sells 4". Do you know if the 4.5" will fit in the housing? Thanks for any help!

[@BeardedTeslaGuy]

4.5” is correct

[@warnerfowlkes782]

Nice job

[@adamperez1478]

Good video. Not as labor intensive I thought it would be

[@Dejablu4u]

I bought after market fog light and I can’t get them to work. My harley kit only had the gray/black wire coming down from the housing but it looked like you had a separate black wire coming down through with the black/gray wire. Where did that extra wire come from because mine doesn’t have that. Thanks!

[@BeardedTeslaGuy]

Not sure what the difference would be and how I have more wires than you

[@Dejablu4u]

@@BeardedTeslaGuy it’s ok. I just ordered the harley lights so I can just plug them in and go. Thanks!

[@vintagetrk]

So I have the chrome lights and this whole extra step is unnecessary with the chrome lights apparently.

[@cd4917]

Hi, thanks for the great video. I also have that kit from harley, however, I only have 1 black wire on both sides? Nothing to splice and connect so I tried connecting in the same order as you did and turn signals won't even come on. Do you have any idea what I may have missed. Thanks

[@BeardedTeslaGuy]

Not sure what the issue could be. Maybe the other wire is buried in there?

[@cd4917]

@@BeardedTeslaGuy Thank you for your response. I found that one of the blue pin connectors that go in to the plug was not locked in properly. Still second black wire but same order as toy installed with no splicing and they work again. Maybe just different on the 21 SGS. Have a great day!

[@Dejablu4u]

What tool did you use to tighten up the auxiliary lights after you got them adjusted? I’m having trouble finding anything to fit in that small of space. 😩

[@keithwilliams9173]

Thank you for the video it help a lot 💯 . No cutting or butt connector plug and play I purchased kit #67800367A from the HD dealership $463.00 and Amazon LED 4.5” passing lights brand LX-LIGHT $38.99

[@jobosch1509]

Hi, when you started the Fork-Mount Wind Deflectors were mounted. Why did you remove them ? Don't they fit with the auxiliry lighting kit?

[@BeardedTeslaGuy]

Yes they fit but I wanted to take them off for a bit and this was the right time to do that

[@jobosch1509]

@@BeardedTeslaGuy thanx

[@emdx3]

Instead of cutting that wire in half, I would just buy additional wire to use. Not sure why HD didn't include a separate piece of wire.

[@howardstumpf-doc9462]

Can't I simply sodder the wires instead of using that connector?

[@jonathanferrante3271]

@@howardstumpf-doc9462 this is exactly what i was thinking while watching. Seems solder and shrink wrap would be a better option.. great video though 👍🏼

[@kennethgmurphy2923]

Because H D is to fucking cheap!!!

[@monsterlt1926]

So I am assuming the dash switch is for the running lights. I have already used the left side for air shocks up and dow. Will that switch work on the right side of the dash?

[@BeardedTeslaGuy]

Sure

[@bigdaddy5948]

Couldn't get the plugs provided to work. I used tube wire connectors instead.

[@BeardedTeslaGuy]

Hmm. Something may have changed since I did this

[@Dejablu4u]

What brand of after market lights did you buy? Did you have to change out the wires too? I have a 2018 street glide and I bought the harley auxiliary light kit like yours but the lights I bought have different wiring than what is attached to the housing with the kit. Do you have a part number of the light bulbs you bought and did you have to change out the wiring? Thanks!

[@BeardedTeslaGuy]

they were on amazon, don't recall the exact ones. I did have to add an adapter but only for the main headlight. Fogs were fine.

[@Dejablu4u]

@@BeardedTeslaGuy Thank you so much! I think I found them! I will let you know how it turns out! Thanks for the step by step video!

[@South.Ern.Comfort]

Got it from Harley today, I installed it, the blinkers work but the lamps don't, could it need to be flashed because of my thundermax tuner? Any troubleshooting advice ?

[@BeardedTeslaGuy]

Not sure. Mine worked no issues

[@South.Ern.Comfort]

Do you have an aftermarket tuner ? The thundermax replaces the entire Harley ECM

[@chandawilliams1257]

Did u add the accessory wire harness

[@crazylouie68]

Great vid. You lost me on the 2 black wire part ( where you say 1 must be cut). I wish you showed that whole process. The rest seems simple enough.

[@richardmendez2161]

If you have the chrome lights there is no second black wire to connect.

[@crazylouie68]

Richard Mendez i have black

[@howardstumpf-doc9462]

Can I solder the wires instead of using that connector? (sodder, lol)

[@BeardedTeslaGuy]

Yea, of course!

[@machineheadminot]

will u please post a link to the bulbs you used for this build?

[@miayamagucci630]

Well you never covered how you tightened up the lamps with the wires pulled through AFTER you mounted and adjusted them

[@kerrianchambers4409]

Good video, Thanks bro!

[@BeardedTeslaGuy]

Glad you liked it!

[@colombianodny]

Do you still have your oem turn signals?

[@BeardedTeslaGuy]

Probably somewhere in a box

[@colombianodny]

@@BeardedTeslaGuy find out. I’ll buy them if you want to sell them

[@NightGlidr]

Just wondering if you can re-install the fork mounted wind deflectors with these lights installed?

[@BeardedTeslaGuy]

Indeed!

[@mikemitchell8220]

Thanks for the vid. Any indication what country this kit is made in? Taiwan?

[@BeardedTeslaGuy]

China

[@joed4303]

Hi! Has anyone had issues with water, (not condensation) collecting in the turn signals? I mounted this kit on my bike a couple months ago and have had no issues other than the water.

[@BeardedTeslaGuy]

Did you use the included foam gaskets for the lights? If so, some moisture shouldn’t be an issue, but those should help keep it out.

[@joed4303]

@@BeardedTeslaGuy Thank you for the quick reply! I don't recall seeing the gaskets Hopefully I still have the box.

[@west5107]

Do you have to have the switch or can lights be installed without the switch?

[@BeardedTeslaGuy]

You have to have a switch

[@stanfry4993]

Do you know if we can get the dash switch and the plugs anywhere else..I bought as after market kit

[@BeardedTeslaGuy]

I don’t. You can talk to Harley and see if they can order just the switch.

[@tedwards2911]

What size bulbs did you get? Can you post a link?

[@jbucks166]

Well done, great video. I realize your install was OEM parts with plug n play results, Hopefully you can help with a few questions. I have a 2014 SGS and I'd like to add the auxiliary light kit (aftermarket/amazon), HD cost is killing me. The set I'm looking at is ( ASIN : B07QX5MJB9 ) looking at the wiring I'm not sure which adapters I'd need. Turn signals have 3 wires and drive lights have a single wire coming out. Turn signals i assume would get their own 3 point connector and reattach to factory plug/harness. As for the two drive/spot lights, would they be spliced together and ran to the switch? or would there be adapters for that to connect to harness coming off switchpack? As for the switch, I have 3 dummies on left side dash, behind it the harness is plugged in. Would I be able to pop the dummie cover off the center and install the actual button/switch or does the whole switch assembly need to be replaced? I noticed with your assembly in the kit the switch was to the far left of the pack. Lastly, I've searched no no end for the independent aux light harness to run drive/spots on while in high beam w/headlamp and have not been able to find such an item compatible with the year vehicle. Could this be what many are saying by having the ECM Flashed? Any help here would be great.

[@BeardedTeslaGuy]

I went the OEM route just to be sure I wouldn't have this issue. I don't know what the wiring would be like with aftermarket at all.

[@p2o8wer]

I want the mounting bracket without the turn signal underneath. Where can I buy a custom bracket like that for a softail?

[@BeardedTeslaGuy]

eBay?

[@p2o8wer]

@@BeardedTeslaGuy can’t find one

[@Thairieskaterat]

Oh its a simple job, but I bought after market Lectric brand, had to buy a pig tail harness, pay to have it all correctly connected, kit does not come a switch so I have to buy a switch "kit" at 140$ and all I need is the switch ??? DAM.

[@BeardedTeslaGuy]

Yep that’s why I got the OEM one

[@robertmorenoii4399]

I didn’t see what you plugged into the dummy switch area with the new switch??

[@BeardedTeslaGuy]

There’s a plug there

[@Combatinho]

Do they stay on for both low and high beam?

[@BeardedTeslaGuy]

I don’t remember honestly

[@Aguatingomez]

Hi do you have the switch par number?

[@MrFUMC1]

I purchased an off brand but it did not come with a switch. Do I need a switch?

[@BeardedTeslaGuy]

Yes

[@MrFUMC1]

@@BeardedTeslaGuy what's the switch part number please....thanks

[@MrFUMC1]

@@BeardedTeslaGuy Do you have the switch part number?

[@dustykerr8737]

What bulbs did you use?

[@BeardedTeslaGuy]

They were a knock off set from amazon

[@dustykerr8737]

@@BeardedTeslaGuy you don’t know which ones do you? Does any of the 4.5” ones work?

[@xxxquadrider]

What is the part number of the fairing switch kit ?? Was there any wire splicing needed?

[@BeardedTeslaGuy]

No splicing needed. I’m not sure the part number of the switch because it was included in the kit.

[@xxxquadrider]

Bearded Tesla Guy Bearded Tesla Guy okay, So everything in this video was provided in the kit part number (67800366A) ??

[@BeardedTeslaGuy]

Anthony Manfredini that is correct

[@tonygaona8345]

Did you order that part @ HD or ??

[@BeardedTeslaGuy]

HD

[@ol8941]

what is amazon link for the bracket?

[@BeardedTeslaGuy]

This is OEM

[@ol8941]

@@BeardedTeslaGuy thanks. I can't seem to find that on HD site. Do you mind posting the URL please?

[@BeardedTeslaGuy]

The part number is in the title. Just google “Harley” and that part number. It’ll take you right there.

[@ol8941]

@@BeardedTeslaGuy Holy Smokes! HD is proud of their parts. Thanks buddy.

[@howardstumpf8787]

My fog lights come on when I push the button, neither one of my running lights come on?

[@BeardedTeslaGuy]

Sounds like a wiring issue

[@howardstumpf8787]

@@BeardedTeslaGuy Turns out I didn't have the LED lights plugged in correctly. Works great thanks to your video. I did solder the two black wires however.

[@marine0816]

What’s the name of the bulbs you bought on Amazon?

[@BeardedTeslaGuy]

Don’t remember.

[@marine0816]

@@BeardedTeslaGuy what style will fit. Amazon has some many options. What will fit? Can you send me a link? Thanks

[@MrFUMC1]

Do you have the part number for the switch?

[@BeardedTeslaGuy]

I don’t

[@cancelchannel3394]

Failure to explain why you have to tear all that apart to add a new switch panel "/

[@Sarge-zc7hc]

Just did this on my 2019 Street Glide CVO. Harley says this kit won't work for that model. Not true... works great. This video was invaluable... I have just one thing to add related to the pins that slip into the 4 pin connector. Be sure to view this video kzbin.info/www/bejne/pZenqnxrfrWolac on how to orient the pins in the connector or you will have hours of uwanted entertainment figuring out why your new lights are not working.... drove me nuts... LOL

[@candlstudios]

Be careful with these cheap LED lights. They put out a lot of radio interference. I listen to a local radio station which usually has a very strong signal but once I installed the cheap Amazon headlight the signal went to hell. Light looks great for 1/10th the price but there is a difference.