BEATER gets BETTER - $1000 EF Civic Build Project D16Y8 Supercharged Hatchback

[@tortuga34]

Great content as usual Jon. Cant wait to see the Jackson EF start rippin!! Love your attention to detail. So many people overlook the simple things that make a car drive and feel great.

[@ivanaranda915]

nice video 👌

[@Deathdude3042]

My dude has the beats goin on

[@bobcobb6742]

Still listening to Stan in 21’ 🤌🏻

[@Scottstunts]

I’ve owned my 90 DX hatch for 20 years. Love the channel man keep the content coming.

[@GarageBuiltHondas]

👍

[@xThe_Caveman]

FinallyJackson built coming out Car looking real good

[@soundboydesign1373]

Canada here...yeah man...good stuff, I laughed as I looked at my pl3-005 shaft seal...things to do...keeps turning that wrench...one love

[@GarageBuiltHondas]

Right. 👍

[@BB_Detailing_00]

Half way through. Cool video with some nice tips. I haven't popped my valve cover off my d16a6, but now I have some tips for when I do. Thanks!

[@Undar8ed03]

i just gotta say that even though I don't own an EF, I've always enjoyed your content. I appreciate what you do for this aging chassis.

[@Mr.SparkleOG]

Damn! Those battery terminals are sick!!

[@efboiz5302]

Been looking forward to seeing more of this car!

[@YeahAlright1]

Those skunk2 spherical front arms are badass

[@GarageBuiltHondas]

Agree!

[@robbig6688]

Always love the videos! Everytime I see this in the feed I get stocked! Thanks for always posting good content!

[@traviscombs2734]

Happy to see your okay glade to see your making videos again its been like a month i was hoping u didn't get covid or your family

[@GarageBuiltHondas]

Thanks Travis, my family has been safe gratefully. I just haven't had too much free time lately but have been able to spend some time outside lately.

[@DanielMartinez-lu3mg]

Can't wait to see this one out and about man supper stoked. Glad the battery tray worked out for you man. Keep up the good work and amazing builds.👊🏼

[@GarageBuiltHondas]

You and me both man, it'll be fun to just cruise it.

[@Foodencio]

Your channel is the best. It always gets me motivated to work on my car. It is a 1992 Lancer, in the US it's called Mirage I think.Also I think you should try getting one of these 90's mitsubishi. They're so similar to Hondas you wouldn't believe it. Try the Mitsubishi Colt with a 4g64 SOHC swap, It is a beast, and cheap!

[@GarageBuiltHondas]

Glad to hear that, its a great stress reliever getting outside. I wouldn't mind trying my hands at some other builds one day. I can't tell you if ill ever get there though.

[@Pinkarmada01]

The 4g9x is the gsr. The engines only sucked when the 4g94 came out. However. You should look up on youtube the 4g92 mivec dohc. They had this head in aus for a pretty penny but it bolts on the 4g93 and 4g94. Seriously its best sounding engine and mivec kicks in like a b series vtec but with a diff sound note. Im the pioneer of the 4g94 dohc swap on a lancer at least in the states i dont see anyone else cause its soo old.

[@Foodencio]

@@Pinkarmada01 I wish mivecs came out here In Brazil. We only had the SOHC of everything except the 4g63 on the Eclipses. The best we have are the 4g9x hahah. My plans right now is to get the 4g64 SOHC which came in the Galant, is kinda cheap and a nice to tune.

[@Pinkarmada01]

@@Foodencio the 4g69 sohc has mivec. Its also the evo block so it shares some aftermarket parts with the evo

[@Foodencio]

@@Pinkarmada01 Oh yeah, I forgot. It's a nice engine. It only came with Space Wagons here though, and they're inverted in relation to my car

[@thaoboi22]

I have the same problem with my civic coupe on the rear toe. Bought k-tuned toe arm and was about to bring the driver side in more but not to spec. Hoping to see the next video to see how you fix it.

[@BarbasLife]

Single jingle 💪

[@jsdhesmith2011]

Yes! Can’t wait to see this build. Live your channel!

[@TheBaconAgent212]

Z6 and y8 have a different offset on the jrsc at the pulley about 1/8-3/16 difference Hope this helps

[@GarageBuiltHondas]

Immensely, thank you! 👍

[@cre8tivegarage157]

Supporting from Las Vegas fam , keep up the hard work

[@hondaland_]

Might have caught a curb on the back wheel. Maybe adjustable compensation arms are needed

[@LetsGammel1996]

bumping stan in the background. Instant like.

[@juniorakasuperman]

That beater is clean 🧼

[@isaiahbanks2984]

I highly suggest getting some ratcheting wrenches that have that swivel nech. I use them all the time.

[@GarageBuiltHondas]

I have a set of gear wrench ones, only use em every so often.

[@young_humble2939]

Awesome vid Jon!!!!

[@d.r.807]

Dude you are putting in some work! Great content and dedication

[@GarageBuiltHondas]

I've been trying man!

[@efnmadaboutcivics88]

Yes! Finally lol. I'm excited to start on my second EF! Got it for $600 rough shape but I am going to be racing it. It's still original D series 5 speed, want to go the boosted route for this engine just to see what she can hold.

[@GarageBuiltHondas]

Right, been a minute since I've had a video out. I've got more coming as I've been able to get some work done on this car lately.

[@efnmadaboutcivics88]

@@GarageBuiltHondas alright I can't wait! I was interested in seeing what that supercharger could do! Quick question off topic lol, on the D series engine where is the oil pressure sensor located? I've yet to have to replace one and my new hatch has an oil light on but has plenty of oil. I'm hoping it's not the pump lol

[@GarageBuiltHondas]

Next to the oil filter.

[@efnmadaboutcivics88]

@@GarageBuiltHondas makes sense lol. Thank you!

[@willmoua1]

Good to see you back brotha

[@hondaland_]

Hose and a brake bottle if you don't have the little kit works the same!

[@isahacks]

On that toe issue i had this happen before and it was that i was using an integra compensator on the trailing arm and was too short so i switched back to the ef one and it was long enough so i didn't have the toe issue measure integra vs ef and use the longer one!! Trust me thats it!

[@littlejapanesehotrod]

Yeah you have to use the civic toe arms integra ones are wrong

[@isahacks]

@@littlejapanesehotrod yea the toe arm! That word eluded me and I used compensator which is what he used in the video!! Bro I did that once and the car ate the entire tire in like 1/2 a mile round trip!!

[@GarageBuiltHondas]

Compensator arms is the technical term, but people use toe more often. 👍

[@isahacks]

@@GarageBuiltHondas good deal, hope you fix the issue, cant wait for the next video!

[@mycardiy]

Looks amazing so far! great work as always

[@williamfullman2639]

I was out of town when I watched this episode man dont care I will always love the content keep it up man

[@GarageBuiltHondas]

Love to hear it Will!

[@amiesports]

this is therapeutic and I love it

[@timothyshinkaroff7213]

Hey not sure what crank pulley your using but these superchargers should pull 5-6psi with a stock charger pully at lest my charger did I had z6 crank pully the charger might need a rebuildable they do sell a small pully on eBay now mine pulls 10psi hope this helps

[@GarageBuiltHondas]

Thanks for the input. I believe it might be the y7 crank pulley still. When I removed the pulley on the charger I measured it then looked online and the size was around 4psi. I'm happy where it's at for now. I'm hoping it runs fine and then I can make more power soon.

[@roelpastors9588]

Good one on the washer :)

[@GarageBuiltHondas]

Let's hope it works!

[@muas209]

Looks like your running y8 jrsc pulley which used 3 rib belt due to clearance issue in ek

[@abdulhalimmohamedhalim7777]

I still using until now. Model sh3 yrs 1990. Honda maintance must follow the schedule and change part by part. My standad top speed until now 190km, before 200km standad engine just piping system setting. Now caperator problem, 30yrs using, i already change anorther caperator model proton wira 1.5. , Pick up higher and top speed same.

[@GarageBuiltHondas]

👍

[@upfactoryracing4148]

Oh yeah lookin way better! Can't wait to see it when done. You gonna track it?

[@GarageBuiltHondas]

Not seriously, but yes. I wanna turn some laps in it and then just keep it around for fun.

[@upfactoryracing4148]

@@GarageBuiltHondas cool it is a fun build. You don't get to see those single cam supercharged rides!

[@socksonfeet8125]

I wish you would sand/prime/paint then matte clear the old parts so they would look hella clean next to the new parts. I'm a little OCD and always do that lol

[@GarageBuiltHondas]

I'd love to get to that stage. I'm a little more concerned with just getting it running and up on its feet as I'm so pressed for time these days in my everyday life. Hopefully I can get there sometime.

[@orbitwankenovi1463]

Cool video bro!

[@ef_danielsan]

at 16:40, if my axle does that, is it busted? It only does that on the half shaft side of my CRX. brand new axle too!

[@GarageBuiltHondas]

You don't feel the "clunk" when engaging into 1st gear? Mine was easy to tell. Its super smooth now though.

[@ef_danielsan]

@@GarageBuiltHondas I totally do. But it was newly rebuilt axle from rockauto. It must have been defective. Its a complete guessing game matching axles to my ZC transmission.

[@GarageBuiltHondas]

They're not similar to the EF D axles?

[@ef_danielsan]

@@GarageBuiltHondas I have a half shaft. I'm using DA Axles without the abs ring

[@GarageBuiltHondas]

Like a B swap. Shouldn't be an issue then. Try an AutoZone axle next. I have had great experiences with them.

[@mplvt]

From what I remember 1320 makes the pulley for those super chargers

[@GarageBuiltHondas]

You're correct, they do.

[@wilgainprophete8160]

Hello how are you doing am putting a 94 engine gear box Honda Civic in a 91 Honda Civic body. I was wondering which kit I could purchases to get the job done.

[@spencersgarage]

Nice work!

[@redliner999]

dont forget the brake discs they are fire

[@GarageBuiltHondas]

Not sure what you mean.

[@redliner999]

I mean they looks good i like those perforated discs 😁

[@Myles8825-]

The trailing arm is bend. I had similar problem on my disk brake trailing arm, lucky i didn't dispose my old drum brake trailing arm. What i did was swap over the the complete brake assembly from the disk brake trailing arm onto the drom brake trailing arm. And the problem wqs solved

[@GarageBuiltHondas]

😎

[@bbbt8090]

As much as i love these cars, i hate working on them now haha. Miss my built EJ8 though....

[@GarageBuiltHondas]

Getting older changes perspective for sure.

[@fpd-6912]

is there any aftercooler gonna fit jrsc on d16

[@GarageBuiltHondas]

I believe LHT Performing makes a custom setup, but there isn't an option that Jackson Racing ever made.

[@danieltinoco8569]

@garagebuilhondas what ecu are you using on this setup and do you have a certain basemap or tune??

[@GarageBuiltHondas]

S300 v3. Someone local is taking care of a basemap then a tune.

[@danieltinoco8569]

Oh fosho I tried running the y8 on my 95 civic but I never figured out which route to go about the ecu and basemap

[@TheLatvianboy]

Perhaps the compensator arm is from a crx? Crx uses a slightly longer one than a ef hatch

[@GarageBuiltHondas]

Find out tomorrow!

[@justdee2457]

Wanted to ask whats the measurement are what did u use to trace for the washer u made for the pulley? Have a kit I just installed myself and running into belt slippage..

[@GarageBuiltHondas]

I measured my pulley. Then made a washer larger than it's diameter. I used a compass.

[@vtecbanger3180]

Nice work

[@GarageBuiltHondas]

Thanks

[@vtecbanger3180]

@@GarageBuiltHondas you are welcome. I miss single cams. They are gone in the Boston area and I was into the d16z6 big time back in the day. I would still enjoy my old delsol si with the the 250whp z6

[@adamboyd6992]

thats the 3 rib pulley?.. i dont have a lip on out side either.. on my 4 rib pulley i do

[@GarageBuiltHondas]

Yes. Doesn't look like any I've seen online. Hoping this works out.

[@adamboyd6992]

@@GarageBuiltHondas 1320 performance in California.. he makes snout pullies , idler pullies for b and d series. he is in " honda JRSC " discussion forum on fb

[@GarageBuiltHondas]

Thanks Adam!

[@lorilightfoot6447]

Awesome as always! Quick question why don't you use a oil pan for the brake fluid? Or does the finish on the cement not fall apart with brake fluid?

[@GarageBuiltHondas]

The finish withstands brake fluid. I like the cardboard as I can just toss them when done.

[@Val-bw4bz]

Just bought my fifth CRX. It’s my first CRX in need of restoration though.

[@GarageBuiltHondas]

Nice

[@maxwellstaley1936]

any idea when stickers will be back in stock?

[@GarageBuiltHondas]

I haven't made any opportunities to create some. Hopefully by the new year.

[@maxwellstaley1936]

@@GarageBuiltHondas wonderful! I am excited. your videos have been a big help with my civic.

[@GarageBuiltHondas]

👍

[@timothyfraser2631]

did you do a install video of that Jackson supercharger?

[@GarageBuiltHondas]

No. It came on the car. kzbin.info/www/bejne/npDSn5p8a56lnLs

[@spacekitty530]

I have a stock and pretty impeccable 89' dx that got stolen 2 days ago. It had 108,000 OG miles on its little engine and I had a long-term plan to upgrade it progressively. Heartbroken, needless to say, I started scrounging for another. I found a similarly unmolested, and low miles, 1990 Si. My question is how much should I pay for it? I know there's a lot of variables to consider, so I just based my offer on what I paid for the 89', $2000. It was mechanically and aesthetically as good as it gets for a car that old. I offered $3000. Is that reasonable? Funny side note, I missed a call this morning from an officer in a town a couple hours away. They found the 89' DX! I'm stoked, but now my wife is saying she would like to have one to, and doing the EF research has stoked my fire. Love your content by the way.!

[@GarageBuiltHondas]

Lucky!! I'd say between 3-5k depending on condition.

[@ghosteh6503]

Hey just curious, why do you use the stp xl filter instead of the oem honda one? It’s the same price and also available at autozone where you got the filter.

[@GarageBuiltHondas]

It was one of their specials they had at the time. I've been using a lot of STP filters on mine and my wife's daily for the longest time so I'm confident using them. We haven't had any issues and we put a ton more miles on our daily drivers than my toys ever see

[@josephrosage9261]

I’m doing the same swap what motor mounts do you have?

[@GarageBuiltHondas]

Innovative

[@vicentecerna8885]

Perfect timing ☕

[@rt4wd_wolff]

Dang man! I gotta get me a JRSC for my new RT4WD Wagon that has a D16A6! Also would one for my B20V Wagon and Lifted CR-V 😂

[@GarageBuiltHondas]

You should man! That'd be killer

[@AJOSHUATREE]

I have a quick ? my 90 ef I did a 0bd1 d16y8 swap and IV tryed everything to get it to stop running rich it has a map sensor code and vtec code that won't go away IV changed them both 2 times still rich I could really use some input here

[@GarageBuiltHondas]

Check your wiring with a multimeter. Might not be the sensor at all.

[@missmewiththat2535]

Hell yee bumping Eminem 2020

[@thejustmechannel3298]

Just started watching video. Thoughs maybe a power steering pulley wheel fit the suoer charger? Lolz??

[@GarageBuiltHondas]

I'm not sure. I'd have to check how it mounts. Might be a possibility

[@vicentecerna8885]

Hey bro pull a part off montana has an ef hatch fairly complete just to let you know. It got there couple days ago ,idk if you would be interested have a good day

[@GarageBuiltHondas]

Thanks man, appreciate that!

[@ishotasheriff9340]

what is the name of your wheels ? they are cool

[@shedshopracing6235]

Jon, do you have a link to the post mount quick disconnects?

[@GarageBuiltHondas]

Link in description. 👍

[@shedshopracing6235]

Honest to goodness I read the parts listed a few times before asking for the link. I just plain old don’t see it there.

[@GarageBuiltHondas]

Lol, its right above the "cameras used in this video".

[@shedshopracing6235]

I’m sorry, the battery terminal post mount quick disconnects

[@GarageBuiltHondas]

Yup, that's the one.

[@redead31]

Was that timing belts manufacture date 2014? Wouldn't that be considered too old to use? Or is ~6 years more for when they are on vehicles

[@GarageBuiltHondas]

I've read regardless of mileage or use, they generally last 7-10 years. I'm not sure if that's the production date, but we're gonna let it ride anyway.

[@pnwgamerguy8030]

Do u know if when using a z6 transmission in a ef , if the z6 axels work?? Or what ones do I need?

[@GarageBuiltHondas]

Any 88-91 Civic/crx, except HF or 4 speeds.

[@MatsuYoda]

Sounds like my playlist haha 😎🤙

[@MatsuYoda]

Check out hex.com and axion.network brotha. We are GOI g to the moon. I want all my friends on board. Cheers brotha

[@cedriccope178]

Finally some new content lol.

[@GarageBuiltHondas]

Yup, I still manage to get outside every so often.

[@cedriccope178]

@@GarageBuiltHondas nice

[@jivediy2711]

Thats funny i just did a rear disk brake conversion on my 01 4 door civic lx and i have the same toe issue on my right rear i also adjust my toe all the way in and still bad. Im wondering if the hub is bent i do hear humming around 40-60mph left side is perfect. Let me know whats wrong with yours.

[@GarageBuiltHondas]

👍

[@throughmyeyesmedia6492]

Nice work and I need to find me a ef shell for race car.

[@GarageBuiltHondas]

You sure do

[@throughmyeyesmedia6492]

@@GarageBuiltHondas I just don’t know how you always come across these efs man lol. They like you or something.

[@GarageBuiltHondas]

I'm always looking, have actually passed up a couple lately too, one I regret. But it always works out the way it should.

[@throughmyeyesmedia6492]

@@GarageBuiltHondas I don’t find too many good ones around here.

[@GarageBuiltHondas]

Mr either. It'd rare but I'm the person everyone's messages first before going elsewhere.

[@NORUSH504]

I have a 1990 with engine blow,what kind of engine is that one !! I don’t want to do to much on a swap, looking for something nice n easy

[@GarageBuiltHondas]

This is a sohc vtec from a 96-00 Civic.

[@ef_danielsan]

is it because the toe arm is off the integra trailing arm? You have to re-use the civic toe arm. Integra toe arm is too long.

[@GarageBuiltHondas]

Tune in to the next video to find out. 😁

[@jngtruong]

Would you recommend the same trans fluid for a 05 rsx type S too? My 3Rd gear kinda grinds. TY

[@GarageBuiltHondas]

There's a lot of debate online, some love it some don't recommend it. I've never had issues with it and seemed to help a small grind on a DA I used to own.

[@elmeromerochitown8476]

Were did you get that super charger from? Thks

[@GarageBuiltHondas]

kzbin.info/www/bejne/npDSn5p8a56lnLs

[@bobcobb6742]

How’d the timing belt turn out after 6 months +?

[@GarageBuiltHondas]

Zero issues

[@jasondunn6223]

Hey id like to rock some of yer merch! A t shirt at least, says sold out unfortunately.

[@GarageBuiltHondas]

Yes, they were a pre-order I did back in May/June. May create a new batch/style within the next 3-4 months.

[@thomaspotemciano]

Its the little things that count

[@GarageBuiltHondas]

💯

[@hondaland_]

The belt that was on it looks like a contitech too. That's The cracking that happens to them

[@GarageBuiltHondas]

I like those

[@stevenfoster7453]

Man i have a pair of those enkei wheels there gard to find

[@GarageBuiltHondas]

RP01'S? I've seen a few here and there. Good wheel. Mine are getting powder coated finally. They needed it.

[@stevenfoster7453]

@@GarageBuiltHondas man i got a pair i gonna send u a image on insta

[@wf6951]

DO A CR-V NEXT!! Older CR-V, the new ones are just full of electronics and hard to fix.

[@GarageBuiltHondas]

👍. Been meaning to get work done on my CR-V but haven't taken the time to do so. Will hopefully in the winter

[@roronoa7vector]

Hi! Anyone know what radiator is this?? we learn so much from your videos!! keep it up!

[@GarageBuiltHondas]

This is just a stock plastic radiator, nothing special.

[@roronoa7vector]

@@GarageBuiltHondas thanks for the response! u think its possible to fit this full size radiator on ek d16?

[@GarageBuiltHondas]

Search online, I believe you can use a 94-01 integrity radiator and they make brackets for it too.

[@GarageBuiltHondas]

Here ya go, these guys are really cool too. You should sub to them, let them know I sent you. kzbin.info/www/bejne/mZLXlpugp62Gn5o

[@roronoa7vector]

@@GarageBuiltHondas here in greece (europe) it's hard to find integra parts and really expensive to buy parts from US! I love RM channel! Thanks for the response I'll try to fit a new aftermarket full size ef radiator! 😊 I'll let you know here on comments

[@wilgainprophete8160]

I have a 1991 Honda Civic body. I’m using a 1994 Honda Civic engine gearbox I’m trying to put it in the 1991 Civic engine mount no fit how can you help with 94 engine gearbox fitting in the 91 Honda Civic to run the road. Help me please with the Project.

[@GarageBuiltHondas]

It should bolt up fine using the transmission and all of the mounts from the 91.

[@JRSC89]

how the map sensor works, it cannot measure map signal there.

[@GarageBuiltHondas]

It does. Trust me.

[@frankier3701]

They must be da arms making the suspension pop out like that only Ef fit right

[@GarageBuiltHondas]

Find out tomorrow morning!

[@fernandopalacios2212]

Hi what transmission mount did you use on Ef'??

[@GarageBuiltHondas]

Innovative

[@fernandopalacios2212]

@@GarageBuiltHondas can you give me the link please

[@GarageBuiltHondas]

amzn.to/3uIDIXt

[@ivangarcia800]

Jammin out to electric feel

[@GarageBuiltHondas]

😎👍

[@labstabs8027]

How’s your mpg and daily driving?

[@GarageBuiltHondas]

No idea. This car won't ever be a daily driver and it's not driveavle yet.

[@mattstarnes2006]

Speaking of O'reilly's if you go in there and yell their theme song "Oh Oh Oh O'reilly's Auto Parts" you get a pretty decent discount

[@GarageBuiltHondas]

What, really?

[@mattstarnes2006]

@@GarageBuiltHondas no but it's a funny telling your friends and watch them embarrass themselves 😂

[@GarageBuiltHondas]

😆 🤣 😂

[@doublescoopgarage8051]

The pulley looks like it's on backwards, might be why it's singing belts

[@GarageBuiltHondas]

It's not. It only fits on there one way. If it was reversed, it wouldn't line up with the tensioner or the crank pulley.

[@diegoarmandogarciaamor9821]

👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼👌🏼

[@thefightlife]

yo where tf do i buy a jckson racing supercharger?

[@GarageBuiltHondas]

Gotta find it used somewhere, every now and then they pop up.

[@sofialamprou7031]

can someone tell me What is the song that sounds?

[@GarageBuiltHondas]

When?

[@sofialamprou7031]

@@GarageBuiltHondas this song in 15:26

[@GarageBuiltHondas]

@@sofialamprou7031 I don't know, it's a free KZbin song. I can't remember the artist, I have a bunch of music downloaded from KZbin, sorry.

[@krx_kid9104]

🔥🔥🔥

[@GULLAHTV33]

I rather do this than a bseries

[@lilwindex2390]

Stan from eminem is so good

[@dailydrivendiecast]

👍👍👍🌵🌵🌵