Beats By Dre EP Broken Not Working AUX 3.5mm Audio Jack Tip Plug Repair Replacement Repair

[@alexblower]

Followed this and voila! Worked first time. Not soldered since my college days! You can't really go wrong. Buying a soldering iron and shrink tubes was much cheaper than sending it to be repaired or getting a new set of headphones. Just have to glue it shut now.

[@tomrupp3745]

This was very helpful. First time soldering and works like a charm. Thank you.

[@Joesge]

Glad we can help:) Please like, subscribe and share the video.

[@hasanserdaryokus1911]

Thanks, man I have solved the problem by using your steps.

[@TR0bexperience]

hello Joe great work I have this plantronics and they are made of fiber optic instead of the traditional wire. do you think I could use a regular wire instead? regards

[@Joesge]

Email us at [e-mail] and we should be able to help you there:)

[@danielcastillo808]

Bro I got a quick question how much would it be If you fix my white beats solo 1 its when you close from side it wont slide back in and its lose when I put them on they come out

[@Joesge]

Thanks for watching! And as for the repair, we would charge about $40 if that was all you needed to repair. You can follow our steps to fill out the repair form here: JoesGE.com/pages/repair-services . CH

[@edwinwise6751]

Thank you , nicely done

[@Joesge]

Thanks for watching. Please like and subscribe for more content like this!

[@lisaford1363]

I just ordered the plug from the ebay. Can you tell me in your opinion what kind of solder and solder pen should be used? And where they can be purchased? Tia!

[@Joesge]

We use Hakko soldering tools. You can pretty much use any soldering pen though. And for the solder we don’t use a specific type but we do recommend for you to use flux with it also.

[@alexxin01965]

Good video, but you can't see the color of the wires. Can you tell me in what order the cables fit for the volume control to work? Thank you

[@Joesge]

Thank you for the comment. Unfortunately, we are unable to post photos in the comments. Please contact email: [e-mail] for wiring schematics. -David P

[@franklobo5876]

I bought some beats for my daughter aka daddy's girl and one of our cats chewed the cord. Im good with electronics but I don't know what model it is. Its pretty basic and the cord us flat. The cord does not plug into the ear piece. Can i replace the whole cord or what do you charge? It looks like these that you're working in. Thanks

[@Joesge]

Email us with your model number at [e-mail] and we will be able to help you there:)

[@franklobo5876]

@@Joesge im not sure. I threw away the box . I don't see any markings on the outside

[@hijodelmar22]

Thanks man, you saved my life :)

[@Joesge]

We appreciate your positive feedback. Please like, subscribe and share the video. It's our oxygen. It fuels our fire.

[@luiscortazar6291]

Would this fix a faulty mic?

[@cristianbarra2675]

Me sirvió, gracias bro

[@ax_el_alvarez]

Thank you so much

[@anagraphical_angel]

Anyone else use beats headphones to watch this?

[@Bruh-js2hv]

My ones with the jack sticking halfway out lol

[@Oatsy26x]

TheSilentType mine just broke in half.

[@Bruh-js2hv]

Mine were good 🤣. Just needed a new aux lmaoo

[@allstate5811]

@@Bruh-js2hv how u change it

[@Bruh-js2hv]

@@allstate5811 buy a aux cord at wall Mart

[@juanjosecarvajal9478]

hi, nice work. i did it but i cant get the volume to work why could that be???

[@animepop1972]

you can say what material is the one you use and bring the image closer

[@savage_bombon8697]

is it possible to do it without flux,solder,2p-10,etc and use super glue

[@reubenjrsoccerhighlights7780]

Hey do you need to strip back the red, green , red/green wires and expose them before soldering?

[@Joesge]

Reuben, we suggest that you do not strip any of the wire. Ruslan P

[@babudelhi9885]

is that jack great for flat wire

[@kingo9708]

How much would it be to fix some beats earbuds it has the same pro problem as yours did

[@Joesge]

Thanks for watching! You say earbuds, what is the make and model of them?

[@kingo9708]

I'm not sure I got them as a gift but the audio jack broke

[@Joesge]

Thanks for the info. We can replace most any audio jack on ear buds or headphones for around $35 if you send them in to us by following the steps on our website here: JoesGE.com/pages/repair-services . Matt D.

[@smackahoetribe1906]

Yo I cut the chord 4 inches above the Jack , Wired together another jack no sound to the Ear peace but on the Tv they can hear my mic but I can't hear game play or there voice?

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with your question. We will be able to better assist you there. - JoesGE

[@jaykillr3478]

how much would it be for all the stuff to repair it

[@Joesge]

We charge $35 for an audio jack repair. You can send it to our location by submitting our repair form here: JoesGE.com/pages/repair-services, use Google Chrome to submit our repair form. Ruslan P

[@multiblade04]

Joe's Gaming & Electronics do you offer these services to people in Canada?

[@docilegravy4529]

hey I tried this on my eps and the audio works fine but the songs are randomly skiping and the volume is going up and down randomly on my phone

[@Joesge]

You may have soldered the wrong wire to the wrong place.

[@toneroh]

Hi Joe, I love your video, it gave me hope of recovering 3 Dre Beats I have. However, I don't have access to all the tools you used. I live in London and you are in America. Any hope of getting the tools and I pay for them or you repairing them all for me. Thanks for being so helpful. Desperate new fan from London.

[@Joesge]

What models of beats do you have? What are the issues?

[@toneroh]

@@Joesgeit's difficult to tell the problems because I dismantled it and realised I didn't have all the tools needed to fix it. so they are both in parts but I knew they were working but probably would need a complete rewiring. And the other one is Beat EP On-Ear Headphones with a connecting jack problem.

[@TheGproProductions]

How do you get the solder to stay on the aux points so easily

[@Joesge]

Thanks for the comment. Using soldering flux will help the solder stay on the points. -David P

[@_mr.__phoenix8884]

Where do the other golden wires go?... The ones other than the mic wire

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] and we will be able to better help you there.

[@SurferKhaled]

Thanks for this, was very useful - however, having soldered all the wires as per the video, volume / mic / stop/start don't work - left and right head phones work perfectly - I've inspected the plug / soldering and replayed the video to make sure I didn’t mistakenly connect the wires... any idea what could be the issue?

[@Joesge]

Thanks for watching! Could you send us an image or contact us via our support email or number? We can better assist you from there as we would be able to see what the problem might be. [e-mail] 360.362.1722

[@kabinraj9538]

Has this issue been resolved? I have same problem, speakers work, volume/mic/doesnt work.

[@diptv2008]

Same problem here, I followed vid exactly on two sets of beats that broke a year apart but on both occasions the mike, control button fails to work - in my most recent fix I tried two different replacement jacks both with same outcome = headphones work great but with no button function - could it be the wiring of beats here in the UK is different? - all the soldering looks good I even tried desoldering the mike wire and touching the contact with no success?

[@simmmomom]

I fix mine with the green and mic reversed from that video

[@youtubemega5371]

Check sound right and left

[@UncleJayRock]

I have the same problem how much would it be to fix ?

[@Joesge]

Thanks for the comment. We charge $35.00 for the Beats EP aux jack replacement. If you would like your headphones repaired by a professional you can fill out a repair form and follow the steps to send in your headphones. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P

[@JMLRecording]

wish there was a simple diagram for which wire goes where, that'd be super helpful! For the rest of you who already understand basic proper solder technique: copper ground wire first on top (not "gold" it's copper) red wire on second green on third red and green mic cable on bottom

[@Joesge]

Thanks 😊

[@christopherkoon2944]

Where exactly did you solder the wires too

[@Joesge]

Thank you for the comment. Unfortunately, we are unable to post photos in the comments. Please contact email: [e-mail] for wiring schematics. -David P

[@lowiecantgreen9496]

How much is it to replace hinge on solo 2 wireless

[@Joesge]

Thanks for watching! The cost would be around $70 to repair, this includes shipping both ways, parts and labor, plus a 100 day repair warranty. If you would like for us to repair them, just follow the steps on our website here: JoesGE.com/pages/repair-services . CH

[@pacopadilla5297]

You still have in stock the jack?

[@Joesge]

Thanks for the comment. Yes we do have the AUX Jack 3.5MM Replacement inn stock. Here is a link where you can purchase it. www.joesge.com/collections/parts/products/aux-jack-3-5mm-replacement-4-pole-parts -David P

[@Ayonzito]

I have the same problem with my beats how much would it cost me

[@Joesge]

If we repair it, it will be about $35 to do.

[@mondotv4216]

These headphones have a terrible cable/connector that fails regularly. They should be repairing these under warranty or using a better quality cable/connector combination. They tend to fail mostly where the cable meets the moulded 3.5mm TRRS plug. I think it’s just the flexible cable in combination with the super thin wires. I’ve had Sony headphones that have lasted for years and not failed like this.

[@MrFixer1001]

you saved my life lol

[@Joesge]

Hello Jose, Saving all electronic lives is our forte :) Ruslan P

[@welterdavin5486]

bravo

[@Joesge]

Thank you!

[@DIAKOURSHEET]

My jack broke into my dr dre pro, how to i pull that out?

[@Joesge]

Thanks for the comment. You may need to replace the aux port as removing the jack will be difficult without further damage. We currently charge $50.00 to replace a aux port for Beats Pro Headphones. If you would like your headphones repaired by a professional you can fill out a repair form and follow the steps to send in your headphones. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P

[@MahamudHasan72]

What is the background music??

[@fishwithadish720]

how much would it be to fix my headband cushion

[@fishwithadish720]

nvm I found a soloutin

[@Joesge]

Thanks for watching, glad you found a solution, hope it works out!

[@fishwithadish720]

Np I’ll sub

[@Joesge]

Thanks a lot!

[@sixtrewoodsy996]

I'll just buy another pair.. Damn I didn't realize you have to have all that SHIT to fix some freakin wires. Oh I just happen to have all that Shit he has on the table to repair the freakin thing... NOT!!!

[@louischang421]

next time do very close up too

[@Joesge]

We have worked on getting more closeups for our repair videos

[@LegoJoshjayjedi780]

I followed the tutorial exactly but my mic won’t work. Help!

[@hat1324]

Most likely, the mic ground wires (copper one wrapped around the striped wire) weren't properly attached to the copper wire bundle you made

[@ushirogeri8085]

It's hard to distinguish the colors of these cables. I'm not a daltonian.

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with a screenshot of your question and we will be able to better assist you there. - Aaron P

[@QuickDrawWP]

What color to what pin??????????

[@Joesge]

Quickdraw, gold is on the first solder point, Red wire would be the second point, the Green wire will be the third point. Red/Green wire aka the mic wire goes on the bottom. Check out 6:00 of the video for more insight. Ruslan P

[@rahulsajeev6201]

Bro is flux important

[@Joesge]

Yes I’d say so. It helps a lot when soldering

[@leakim971]

strange we got the exact same issue...

[@Joesge]

It happens frequently unfortunately.

[@christopherkoon2944]

What jack did you use

[@Joesge]

Thanks for the comment. Here is a link to our repair parts: www.joesge.com/products/aux-jack-3-5mm-replacement-4-pole-parts?_pos=7&_sid=82afd0e57&_ss=r If the part you are looking for is out of stock you can enter your email in the "Item out of stock - notify me!" section and you will be notified when this item is in stock. If you would like your item repaired by a profetional you can fill out this repair form here: www.joesge.com/pages/repair-services -David P

[@zeelowe9231]

The left piece broke I cant here anything on both sides

[@Joesge]

Thanks for the comment. If you would like your item repaired by a professional you can fill out this repair form here: www.joesge.com/pages/repair-services We offer free shipping and diagnostics. -David P

[@smackahoetribe1906]

I'm just a kid mom won't buy me another 100 dolla headphones so I'm trying to fix it

[@Joesge]

Hello, thanks for commenting. Please email us at [e-mail] with your question. We will be able to better assist you there. - JoesGE

[@themonstersgaming9711]

Wil u make it for me,but i live in india

[@Joesge]

Hello, unfortunately, we do not repair this device anymore. We can sell you the parts though.

[@Vistal11]

wtf is gold wires? you neam copper? or ground?

[@Joesge]

Hello, that is correct the copper is ground. -David P

[@christopherkoon2944]

You just said gold first then red and didn’t explain where on the jack they should actually be soldered to

[@Joesge]

Thank you for the comment. Unfortunately, we are unable to post photos in the comments. Please contact email: [e-mail] for wiring schematics. -David P

[@ShapirHSahel]

I have one question - hifi separate Hybrids quality And every music enoatomwnt sound note V Bass mid, trieblekick my ass uo goto heel....this try headphones i need 100 $ But its has must-be origin made in jaopan.&it must will be famous company brand Headphones like....sony, Panasini c aiwa,alpine,boss,pioneer, 10 Drive wach side ×2=20 divice Hybrid valancing quality

[@danielcastillo808]

Do You Want Some Free V Bucks? Jk Hi

[@Joesge]

That is very sad... gave our hopes up 😌 And hello, thanks for watching!