[Review] Jiabaile 1/43 | The Cheapest 4WD RC Drift Car With Full Proportional

Рет қаралды 26,173

Күн бұрын

Пікірлер: 103

@jamiebrown3533 6 ай бұрын

Eh Beaver, you're the best! You should design a 1/32 drift or have the 'Beaver Edition' of a wltoys, kyosho, or whatever you feel is best.

@chipcmc999 6 ай бұрын

Thank you very much for all your videos, thanks to them I am learning a lot. I have 2 models, BMW and porch, although initially they should be the same, the porch is larger as a detail, it has larger wheels and the drift sensation is better in the porch. I recommend checking the wheel arch, the front wheels can rub when lowering the suspension, at least that's what I've seen in the ones I've received. Looking forward to him making a video with recommendations to improve the car.

@BeaversHobby 6 ай бұрын

Interesting! I didn't think there would be any difference between versions. Thanks for the info.

@chipcmc999 6 ай бұрын

@@BeaversHobby At the electronic level I have not seen a difference, they have the same plate but at the dimension level I think there are significant ones: porch vs bmw: weight:51gr vs 45gr chassis: 119mm x 48mm Vs 109mm x 44mm wheel distance 46.5mm vs 42.5mm wheel diameter: 17mm vs 15 Wheel width: 7mm vs 5.5mm

@perryphilip 3 ай бұрын

Thanks for mentioning that the Porsche has bigger wheels than the others. I agree that it drives the best.

@ShowcaseCreative 6 ай бұрын

Great video! I think I'll get one of these. Looking forward to seeing what modifications you can make to it :)

@EidstaRC 6 ай бұрын

It’s amazing. You will eventually own all 4 :)

@ShowcaseCreative 6 ай бұрын

@@EidstaRC Haha, one down 👍. It's just arrived and I'm impressed. I've tried the rubber tires on my carpet and tiled floor and it drives nicely without diffs. I've noticed it flips if you corner too quickly. Otherwise it has plenty of speed for its size and a decent turning circle. I suspect these are going to be popular. Looking forward to mods, if they're possible 🤓

@ed_zimmer Ай бұрын

Hi Does the ruber tires fits on the car? I bought one but the rubber tires get stuck and the car does not move

@roadstar499 6 ай бұрын

Thanks for to demo on this car...its nice to see what an experienced driver can do verses a novice...i rather try to become a better driver if car has potential as is than making all these mods being a crappy driver...i guess you already saw the easy rear suspension mod done by another rc tuber...its great ..i do think a mod to increase the steering would be great...thanks again.😊

@Panster7 6 ай бұрын

Rc stuffs are getting cheaper and better

@gtheodor82 6 ай бұрын

Great video man as always!

@evanwillard2811 5 ай бұрын

Hello again it’s been awhile awesome video and awesome little car i have the bmw version i did make the rear end have suspension all i did was add a spring where the screw goes but i kept the screw just a bit loose so the spring can work

@BeaversHobby 5 ай бұрын

That's a very good approach to add the suspension.

@darkNiGHTS0 6 ай бұрын

Crazy value! Just saw it for $30 shipped on Lesu Air Store. It doesn't have JIABAILE in the listing title but it does mention 1/43.

@itsjase92 3 ай бұрын

They've since released a gyro version which is only $5 more expensive and its much more controllable in drifts

@EidstaRC 6 ай бұрын

I love this car. It’s even better when you add an external gyro. I didn’t think of adding weight so I’ll do that underneath the body. Great idea. I’d love to see these really take off and 2nd version with suspension comes sooner

@Boogie_the_cat 6 ай бұрын

How do you add a gyro? Where to find a gyro compatible that small size? Thank you. I am new.

@carrioncrow8191 4 ай бұрын

@@Boogie_the_catthat brand offers a model with a gyro for $5 more. I’m new too, and don’t even know what the gyro does, but saw that on a website from another channel Edit: the other channel is Tomey RC, but Beaver had a better review

@perryphilip 3 ай бұрын

@Boogie_the_cat want you want is a "dasmikro v5" which is essentially plug and play.

@filsdedieu100 5 ай бұрын

Great rc car ; i love :-)

@ernestryles 4 ай бұрын

They have a new version of these with a gyro. I think I might blind order one but I’d love to see your take on them one day!

@BSM7702 Ай бұрын

I just bought the BMW gtr and im gonna get the rest of them. and make a 1/43 scale drift track.

@but531 5 ай бұрын

We wait to see if it's possible to make it steering more because the steering angle is small and reminds me the cheap 1/12, 1/14 and 1/18 trail crawler rc cars. Also you have video about the Turboracing 1/76 ? You are one the very few guys that show us the steering angle of an rc car. Other guys show the steering angle when the model is driving and you can't understand a lot sometimes.

@hardtobearit 6 ай бұрын

Wish we could get a nice car this size with a workable gyro. Hell even a xmod RC size with red and gyro would be nice. And nothing that breaks the bank. I want a nice backpackable drift rc for when I'm out and about.

@roadstar499 6 ай бұрын

Its best to just add your own upgrades..very easy...some guys will want to drift which with skill this car needs only a little weight added,no gyro,others will want to set up as a normal race car...its great as is imo...

@vracan 2 ай бұрын

they sell them with gyro too now on alliexpress

@abetotero2695 5 ай бұрын

hope you can make a modification video on that model❤❤😊

@TasosX 6 ай бұрын

Great presentation my friend. Thanks. Can you please tell me cm of whelbase?

@FCRC 5 ай бұрын

those look like some funny cars with good preformance

@zamoragera13 6 ай бұрын

Thinking about getting this one. Maybe a different body

@snörre23 6 ай бұрын

I can't believe that you like this one better than the C65.

@gtheodor82 6 ай бұрын

Can the C65 really hold a long drift? I have yet to find a video of someone doing consistently that

@roadstar499 6 ай бұрын

C65 cost over twice as much and is super tiny..some guys like cars this size...

@Boogie_the_cat 4 ай бұрын

@@roadstar499 👍🏽 yes, I see the C65 as a novelty, much less capable car for more money. Needs a microscope to see the C65. My cat would push it under the refrigerator at night.

@roadstar499 6 ай бұрын

I have a few of these now..great cars...just wonder if slop could be removed from steering linkage for mor precise control...maybe using teflon tape somehow ..waiting on your solution or maybe there is none..thanks..😊

@Royce_Moto 3 ай бұрын

Hey im wondering if you can run two of these at the same time with two stock controllers

@tomwright943 6 ай бұрын

Thanks beaver!

@gabriele3321 3 ай бұрын

hi nice video can you tell me how to tell when the toy car battery is charged? I put it on charge but nothing turns on

@BeaversHobby 2 ай бұрын

It's red when charging and the light will go out when it's finished.

@burn1gotbeats 3 ай бұрын

i hope you review the new version 2 that has the built in Gyro 😎

@ed_zimmer Ай бұрын

Hi, did you tried the rubber tires? I bought one but it does not fit, the wheels get stuck on the car

@BeaversHobby Ай бұрын

You'll have to remove the drift tyres first to install the grip tyres. They are tight fit on the wheels so you can push them out from the back of the wheels.

@hotplugin 2 ай бұрын

Nice

@Boogie_the_cat 6 ай бұрын

Hello, nice video. I like the car but i would appreciate to know the battery life before i consider to buy. Do you have battery life information please? Thank you.

@BeaversHobby 6 ай бұрын

For me it started to loose power after about 20 minutes.

@Boogie_the_cat 4 ай бұрын

Thank you so much for responding. That is good battery life. 👍🏽👍🏽

@tenninetwentytwo 2 ай бұрын

Hi Beaver! I have a question. For some reason, my r34 does not drive perfectly straight after turns. Do you have the same problem? Thanks for the quality reviews man!

@BeaversHobby 2 ай бұрын

The servo or the steering might have a bit of a slop. I mostly drift so it rarely goes in a straight line and I don't see it too often. Still, having tried it and yes, one side doesn't steer back to the exact centre randomly. Turn a bit to the other side and have it push back can help.

@tenninetwentytwo 2 ай бұрын

@@BeaversHobby Alright, thanks a lot!

@fizzlefofizzle 2 ай бұрын

Anyone tried to reshell other 1/43 bodies onto these? Would love to have an s13 but not really sure if the wheel bases would match up

@BeaversHobby 2 ай бұрын

The wheelbase on this version is 64mm and the width is 43mm. I've heard Porsche is longer.

@fizzlefofizzle 2 ай бұрын

@ Thankyou for the info! ❤️

@fulltang1 5 ай бұрын

Hey buddy! If i wanted to add a gyro, which would you recommend?

@BeaversHobby 5 ай бұрын

Any micro gyro will work. AFRC GYS-2 V4 or GT55 V4 will do fine. You'll have to convert the plug though. This car servo has the small plug, even smaller than JST-ZH used on gyros.

@fulltang1 5 ай бұрын

@@BeaversHobby thanks for the suggestions! I ended up ordering the dasmikro v5 last night, I assume that'll be fine as well?

@BeaversHobby 5 ай бұрын

@@fulltang1 It'll be great.

@carrioncrow8191 4 ай бұрын

That brand offers one with a gyro now

@ruslank4028 3 ай бұрын

Is it possible to upgrade the battery inside to get more play time?

@BeaversHobby 3 ай бұрын

Yes, it is. It uses regular 1S 3.7V Lipo so you can change that pretty easily. A bigger battery won't fit in the original tray but you can still tape it on the top of the board.

@ruslank4028 3 ай бұрын

@@BeaversHobby Is there a room on top of the board when the shell is put back into place? I have some 1S lipos with 1300 mah that I could use for this purpose.

@BeaversHobby 3 ай бұрын

@@ruslank4028 At the tallest point in the middle of the roof you will have about 20x20x6mm. If the battery is flat enough the whole windscreen and area is around 30x50mm so if the battery is flat enough, it might fit.

@ruslank4028 2 ай бұрын

@@BeaversHobby Thanks a lot. 50mm is not enough in my case. It is flat, but quite long ))

@hwelp 6 ай бұрын

Hey could you check out the ACXWA CD chassis. It looks really interesting

@BeaversHobby 6 ай бұрын

Thanks for the suggestion. This is quite interesting, a whole chassis for 135 Euros. I'm not sure if or when I'll get it but I'll keep this in mind.

@hwelp 6 ай бұрын

@@BeaversHobby there is another one I saw the other day that was really cheap. Like almost half of the ACXWA CD(which is already quite cheap by today's standard) it's the ZDRC V2.1 but I can only buy it from Taobao (chinese store) It's about 258 rmb (Im not sure what's the conversion rate from rmb to euros but 258 rmb is really cheap)

@ignatiusgod5935 6 ай бұрын

do you guys know if there are cars like this for sale in canada?

@BeaversHobby 6 ай бұрын

I don't see it on any local vendors. Just get it from Aliexpress, I suppose.

@arisafif-j5m Ай бұрын

how long run time?

@BeaversHobby Ай бұрын

For me it started to loose power after about 20 minutes.

@GundamDroid 6 ай бұрын

I got this same exact car a month ago. its pretty nice. I might even paint the car classic skyline blue or Advan livery. I would love to see any mods you do to yours. My car came broken, when i adjust steering trim on the controller, the wheels will trim to thr right but will not trim to the left. So ifi tryto use trim the steering locks to one side. Plus a headlight was broken. After fighting with Aliexpress I managed to get a refund. So im gonna solder new lights on. But i dont know how to fix the controller because I took it apart but everything looks okay. The plugs look good. So its a weird problem. Are you going to get the Porsche or the other cars?

@BeaversHobby 6 ай бұрын

Sorry to hear that. Your circuit board is definitely defective in some way. The transmitter is also a suspect but there's no way to fix it. Best you can do is if you have a transmitter with small receiver then you can modify it to use your own transmitter. I don't know if I'll buy more of these though.

@reekooism 4 ай бұрын

Do you think it's usable on a desk or table? That's could be cool. And do you think it's durable of it falls of the table? Or repairable thx

@BeaversHobby 4 ай бұрын

It'll work on a table providing your table isn't as narrow as mine. My table is 45 cm wide so there's not a lot to work with.

@reekooism 4 ай бұрын

@@BeaversHobbythx. Do you think it's reaparable or upgradable or f we break something it's dead ?

@BeaversHobby 4 ай бұрын

@@reekooism They tyres are replaceable. There's no available spare for other parts. I don't think they'll make it fixable with parts replacement either. I guess we'll have to mix and mod the parts if anything is broken.

@thomas68698 23 күн бұрын

Is it gyro version?

@BeaversHobby 23 күн бұрын

No, this one is not. I only got the old one without gyro.

@thomas68698 23 күн бұрын

@BeaversHobby dude, you're the best, even it has no gyro but you were drifting so great

@french__239 6 ай бұрын

does it bind to the radiomaster mt 12 ?

@BeaversHobby 6 ай бұрын

@@french__239 Unfortunately, no.

@french__239 6 ай бұрын

@@BeaversHobby nooooooooo, i Just love that transmitter but inside this cars I think it will not fit a decent receiver

@BeaversHobby 6 ай бұрын

@@french__239 A small receiver should fit. It uses 3 wire servo so that's already a good start.

@french__239 6 ай бұрын

@@BeaversHobby very nice bro, I'll try when my car arrives

@french__239 5 ай бұрын

@@BeaversHobby i have received mine (the bmw) and none of my receives fit inside the car, i'm still working on bind it directly to the mt12 with 4 in 1 module