BED IS ON!!! The JH Mega Truck 2.0 Is Almost Complete... + Cleetus and Cars Prep coming at ya!!!

[@SteveTheBeardedWonder]

This has become one of my favorite KZbin channels. Wholesome, relatable and funny.

[@Andrew-vd2ko]

Yeah, i have swapped watching Cleetus for JH has better and more videos, Cleetus WAS good but in the last 18 months started going down hill with the videos I like to watch, I have no interest in aircraft and a lot of the rubbish he has been putting out that is nothing to do with drag racing and workshop (preparing for races) main reason I subbed to him.... JH is much better these days and I am enjoying his channel, I don't mind workshop updates and updates on building changes etc, not wanting to watch a whole house getting made/built... I enjoyed seeing JH's partner try mud bogging and she took a airboat accident well (hated seeing her get hurt) and liked how she is sensible (laughed at JH flying over the handlebars when the bike stopped he didn't) her comment was priceless.... Please keep it up and don't change the format....

[@DustinN828]

@@Andrew-vd2koJH doesn’t nearly have or produce more videos than Cleet, Yes JH is an amazing, hilarious man who, without Cleet, wouldn’t be into KZbin because Cleet pushed him into getting back on content creation. Both make spectacular videos given the equipment they have.

[@burnedagain6187]

@@Andrew-vd2koI like the mix of Cleetus at times! I find it inspiring at 52years old even. But as FL native of three generations I relate to JH pretty well. Especially the over development and flooding issues. On the east side almost straight across from his location.

[@MichaelWilliams-vb6wr]

💯

[@scewston420]

@@Andrew-vd2ko you must be new around here JH wouldn’t be here and as big as he is now if it wasn’t for cleet

[@paulamitchell-ives2271]

I remember watching the O.G truck go in to cleetus's pond.

[@AndrewK2020]

I remember watching it happen on Emilio’s IG live… it was insane 🤣

[@cody39yrs]

That's what started me watching the channel LoL

[@randallguess2633]

Been here ever since.

[@cody39yrs]

Cleet and squirrel can do some awesome body work. Id check with them.

[@gervaseboschert1546]

anybody else think that the small tire mud trucks are more entertaining than the big tire mega trucks are

[@patrick4293]

You need to get Emilio's cousin to get that dent out for ya lol 😂. Can't wait to see the truck ripping when it's finished. Keep it up brother 🤘🏼

[@Johnald985]

If you take out the tail light you should have access all the way up no need to drill and re weld. I use an adjustable pry bar and put a 2x4 behind it inside the pocket for leverage. Should walk that crease right out!

[@hunglo_ren]

5:51 dudes orange belly/ gut hang n the background is absolutely comedy. 😂😂😂 the oranges-ness?! It was def unique. Idk how to even obtain said color m 😂😂😂

[@N_Denny101]

My favorite diesel and mud truck building youtube channel!

[@6FourPole]

Between yall and cleetus, i dont know who i watch more. Keep it up, yall are entertaining

[@2873lonewolf]

I came to checkout this channel from Cleetus video, I've never left. Justin keep being you and bringing us along. I love the honesty, quirks, extracurricular activities and shenanigans, heres to another 10 years 🍻

[@MrBpritch100]

"Amazon Specials"...yanks out of box, broken. That was priceless 😂😂😂😂😂😂

[@chevyon37s]

You can’t script anything that well 😂

[@JustinWierckz]

Dude, you guys are kicking ass on that. Can’t wait to see it done

[@BenjySparky]

JH and Eason, y'all rock! Love the channel and content. Can't wait until this Friday and Saturday. Good luck, y'all. Peace

[@johndevries8536]

I just put some Amazon headlights on my 05 expedition and they are nice. Thanks for your videos brother!

[@ericday980]

Content has been great as of late JH, you guys are kickin' ass.

[@Ethericbikes]

Couldn’t be more stoked and proud of the work you guys have done putting the mega truck back together!! That blue frame is still so unreal!!! Can’t wait to see it at ride height and with whatever wheels you’re going to use

[@lawsonoutdoorsman2.042]

Need to see more of the black s10

[@Ryangarrow26]

any mega truck progress is enough for me.

[@DisasterRC]

You found an absolute gem in Justin, the way you treat your machines he is one of the hardest working men on KZbin and is always happy to do it.

[@SirJeffreyAllen]

I love the fact you’re selling the work shirts. I cannot wait to see the people all dressed in the JH diesel workshirts that is amazing.

[@vahidvahidnia1643]

Been a fan for ages now, and you just keep leveling up.

[@justinchristensen1026]

from one justin to another. You should have gone with the 09+ style mirrors. I have them on my 99 and they look and work so much better and come in smoked also.

[@TheOriginalDaveJ]

I'd have thought it would be easier to run the brake/fuel lines/wiring with the bed off the truck.

[@jeffsgarage8414]

fass sells a nice sump kit that attatches right to the bottom of any flat tank, and it works great, super easy to install. Iv got one in my lml and it completely fixed the 1/4 tank issue

[@Dezert-adventures]

Why didn’t you update the mirrors if you had to buy new ones?? Just curious

[@SirJeffreyAllen]

Love the channel. I’d be putting a wall on the shop before building a truck, but you do you

[@RJB1017]

Oh shit!!! JH about to hit 300k subs!!! Congrats Justin! Keep up the hard work and killer content 🤘🏼🇺🇸💪🏼

[@randallbuttermore830]

I like the subtle music when installing the bed more than a Timelapse without sound

[@aaronscott2278]

Very nice bed and very rare to find a clean tailgate lol keep up the killer content much love and respect 🫡

[@TACTICALGRASSHOPPER]

Truck is turning out awesome JH!

[@terryfoust4802]

yeee yeee, thats one AMAZING BUILD jh. i love the colors green /blue and black!!can not waite to hear it run and see it performe!!!😃😃

[@kevinmakuen2205]

Can’t wait to see this done ✅ The anticipation is killing me !

[@shawngodsey3115]

Easton's that guy you give a task to and just let him eat. Solid mechanic.

[@PowerstrokeSynd]

Cant wait to see it finished and ripping the mud pits at Plant Bamboo!

[@randallguess2633]

I live in Marion County FL and I get my weather from jh diesel did not know about the storm.

[@joshh9648]

Let’s see some love to that kfx 700

[@SteveRivett]

Your trucks always sound great. Hopefully version 3 of your snorkel system is more successful.

[@fishing2470]

Hibachi auto body can take care of that dint no problem!! Cleet and Squirrels got you covered!! Lol🤣

[@Goose-it]

Can't wait to see the tires get put on, I just bought a 18.4-26 truck, excited for spring

[@alexsuttles7662]

Was the backlash too big in the rear end?

[@WW-rm3cn]

Hell ya. Can't wait to seethe 6.0 mud truck again.

[@NorthernHDrider]

Your head light!!! Easy to fix. Please hold on!! Oven on low for 15 minutes, the lens will lift off the glue. & after can paint a little more (f^$÷ed On Race Day) inside the lens. Amped on finishing day, looking sweet.

[@Takingbacksun06094GT]

Need to take that thang over to see Mr Sam, and get it looking real shiny!

[@Cncjunkie]

Eason being disappointed about the grass is the funniest shit ever 😂Don’t worry bud it will grow back again for jh to rip some crazy rig again lol. Love the content.

[@CadeP196]

Too late to get in now but would be very cool to see you guys do sick week in the race truck! Could tone it down to do the 1/4 in the dyo class!

[@mjmcomputers]

I bet you hit 300k by the next video, you’re killing it on the content.

[@WW-rm3cn]

I only watch this channel for the beautiful Fords.

[@kentuckianaman3770]

It's looking good fellas. I can't wait to this bad boy rippin again.

[@jasonforrest9833]

That blue and green looks damn good.

[@JustyouraverageAmerican1776]

I would’ve put nylon washers between the bed bushings and the frame whether they do anything or not but just for the sake of saying “I tried to save the powder coating”.

[@Element_Industrial]

Coming together nicely! Love the videos!

[@matc350x2]

As a fella from Western N.Y who recently went to N.C. Looking for rust free Superduty parts. I can agree it’s getting tough finding rust free, dent free parts for these trucks at a decent price.

[@411clintonlewis]

Loving the mud truck build it coming along beautiful can’t wait to see that big ol girl in some mud !

[@LethalLee666]

there is an amazing invention that was designed a long time ago called a compressor and spray gun you should give it a try make awesome projects look excellent unless your competing with squirrel and cleetus on becoming new dodgy brothers

[@dylan8285]

Some progress is better than no progress 😂 also I remember the s10s burnout fondly it was an epic burnout with a chance of getting hit with metal chunks lmao. Usually the engine explodes not the trans

[@beaumont9072]

The best part about this channel is Justin. That’s just cause he works crocs every day. America 💪🏼🇺🇸🦅🛠️🙏 But to be honest, watching the sled porn wasn’t bad that’s just because you square body is awesome

[@jdatwood7086]

Dayum!! Get that boy a girdle!! 5:54

[@matthewcostner2937]

That s10 would be amazing with a 4 cylinder turbo Cummins out of a case tractor what a machine that would be

[@darrenbutler1938]

Impassable to find a clean ford box of that year up here in Canada ouff

[@darrenbutler1938]

If the wheel wells aren't missing crossmembers or floor under box liner is rotten

[@BuckDaily]

How come I hit the light button first but it doesn’t show? Yeah buddy, let’s go!

[@RandyMartin-jx8yi]

Everytime ive ever done those 2003 and up super duty beds, those torq bit bolts that hold them down are always the real struggle lol

[@Living_EDventures]

I just bought a whole new underneath for a car of mine. All new bolts and nuts like you. The dealerships sure make gold off some of them. I paid $28 a piece for lower alignment bolts, and they want $30 apiece for a nut I need, and it requires one for each side. That's like two nuts and two bolts, which don't even go to the same part for $120. Yet some bolts are only in the $7 a piece range, and some nuts are only around $4 a piece 🤷‍♂️

[@chrisg4x4]

What about the front bumper and back bumper?

[@baldhead7705]

We see you got them new tractor tires up on top there

[@funinthesun777]

Can't wait for that beast of a mud truck to finally hit the mud

[@FxnBoats]

I've taken apart quite a few of those diffs with those same marks. Not sure if they had grenaded before, but I think those marks are actually normal

[@andrewwaltrip6703]

Cletus and squirrel can take that dent out

[@dawsonhebard3474]

Love the JH content!!

[@jeredmaddox5406]

A cervini hood would set that thing off 🤙

[@russflorek]

Hibachi auto body can get that dent out!

[@stevenmcc2119]

I remember the iPhone 10 video days lmfao mud crickets all over at the bogs 😂

[@alandavies4270]

Looking bad ass guys

[@reggiekilgore7448]

That looks a lot better

[@haydenlundy5666]

Damn my boy got it all out😂 5:44

[@__KNOX__]

Oh crap I think I know that bed. The stick under the ford emblem and the marks from the old fender covers. I might know who painted that truck. Not the peel the other side n if so it was painted a few times black. Or like it matters it’s a mud truck but I do believe that bed comes from a truck that was in Ocala for years then went a wall

[@rodneyshorey1981]

That would make a good pull truck

[@xx11seczxx]

Stupid question but if you’re wrapping it anyway wouldn’t it be way easier to find a clean white longbed?

[@franknbeans3651]

I’d like to see the trailer that’ll hook up to that hitch 😂😂😂

[@JohnRoberts71]

Great content thanks for sharing

[@corbintracy2539]

In my opinion you should have gone with the 2008 f350 mirrors they look so much cleaner have have a square look instead of that round mirror look oh well though 😂

[@that95guy73]

y’all need to put a LS 427 in that s10 and then go do cleetus and cars burnout. maybe slap a little go go juice in it for fun.

[@jmayhaus]

another awesome episode

[@metrickarma]

I still remember the day it rolled into the lake!! Glad everyone was okay but it certainly launched the channel formally!!!

[@michaelheiser861]

looks great

[@jeremyjoyce8637]

Been waiting to see the s10 and Easton together again

[@kayingreer1351]

Okay i absolutely love the build, but can we PLEASE get rid of the roun style mirror and go with the 6.4-6.7 mirror style it would make that truck look so much better

[@BrianMimbs]

I hope he does an epic jh diesel wrap!!

[@SpenserBradley-ct2gm]

If you’d give away something other than a dang duramax I would prolly enter hint hint the better motor 6.7 powerstroke lol

[@JustinHulett-d9w]

I like that guy and his man Justin in crimes 🎉 I love you guys

[@leviMacDougall2727]

Did you take the drive shaft off to see if the pinion was loose on its own or was it still attached

[@a10warthog75]

Places to go 🔥

[@cruisersrus]

Is that the old bogger in the back ground. Why didn't you go with the upgraded 08 mirrors.

[@paynemeikle5853]

Whats your favorite duramax engine. Lb7 lly lbz lmm lgh lml l5p l5b???? I love the lbz personally with the deleted lmm a close 2nd

[@TheGavinbullard]

Put the old chrome grill on the burnout truck

[@zukij750]

Yup

[@SPaRkLeBuNnYs1]

whoa black beddy bambalamb

[@GK-gr2mx]

I can’t wait for JH to put 2.0 on its roof 😂

[@jdshanahan4215]

As long as he stays away from ponds.

[@JamesTK]

@@jdshanahan4215I think the lake at Cleets airfield needs a truck in it

[@michaelheiser861]

like the black

[@brycevannote7908]

Whatcha doin with that meritor, full tube chassis truck??👀

[@ErvinArmenta-o6s]

Could’ve used a 11-16 bed to