BEFORE YOU BUY AN ECHO RB60 LAWN SPREADER, WATCH THIS!

[@GarageGear]

Here is a LINK to the ECHO RB-60 LAWN SPREADER used in this video! Thank you for supporting the channel! 👍👉 amzn.to/3xf59gQ

[@edbrown3047]

I'm pretty sure you are the only one I know of that can make a lawn spreader video informative and entertaining enough for me to watch the whole thing. Thanks for your review!

[@GarageGear]

Haha appreciate the positive feedback Ed! A lot of time goes into each video. About 10 hours start to finish. Thanks for being a cool fan!

[@robertkreachbaum4546]

I bought this spreader several years ago after owning mostly Scott's spreaders for many years and love it for all the reason(s) that you mention in your video. Sturdy and very stable spreader to used and definitely a step up from the scott's spreaders.

[@GarageGear]

Oh yeah! For sure. Thanks for sharing your thoughts.

[@dereklong801]

I just bought this after the Scotts crapped out after less than a year. Night and day, quality wise. Less plastic, heftier, spreads more evenly. Its a winner. My only misgiving is the edgeguard part, seems like eventually it will get loose and randomly flop down.

[@GarageGear]

I agree! Definitely something to keep an eye on!

[@NyTonyF]

I upgraded to this spreader from the Scott’s, glad I did for sure. I did do the zip tie mod to the agitator to help when it’s running low on fert, works great. 👍🏽

[@GarageGear]

Thanks for the tip Tony! I’ll probably end up giving it a shot.

[@donschlonski2936]

What's the zip tie mod?

[@GarageGear]

@@donschlonski2936 I’m going to test it out but adding some lengths of zip ties to the agitator helps get the product out better

[@gwoodru]

I have this spreader in the RB-85. If I had to do it again, I would I would spend the extra money and get the commercial Lesco. But for mow the echo is ok with a few tweeks. Next time I'm getting the Lesco.

[@GarageGear]

Thanks for sharing gwood

[@igormord8636]

same here. Echo should stick with Backpack blowers, trimmers and chainsaws.

[@RichardWorkman-k1e]

Lesco is a Cadillac so it's expensive but good

[@mikehenderson2039]

Very nice product review! Your analysis (not to be confused with "urinalysis"!) was fair, unbiased and you addressed many of the commonly listed pros and cons! Keep up the good work!

[@Semper11B]

Was just scanning comments before watching the review as I do when researching something to be sure I’m getting good info. So urinalysis and being military was like “who’s going to pop this time?” Before realizing I may have ptsd.

[@GarageGear]

I try my best to lay everything out for people so they can make smart buying decisions. Stuff costs a lot of money nowadays and you want to spend wisely! Thanks for watching mike!👍

[@steveeab2364]

I've been using a hand spreader for years on just over half acre. Tired of it but all the Scott's push spreaders seem junky. Thanks for the review on this and pointing out the negatives.

[@GarageGear]

You got it Steve!👍

[@BenNawrath]

I do use the edge guard sometimes, but lately I’ve just been eyeballing it and making my edge pass away from the fence or whatever. For the domination line I use it, but I like to hear it tickle the PVC fence, then I know I’m good. And I just blow off the driveway.

[@GarageGear]

I’m sure once I get used to its abilities I’ll be eyeballing it too. Thanks as always for the great info Ben! Hope you are doing well!

[@BenNawrath]

@@GarageGear any time! Haven’t spread anything yet this season… still doing some raking and cleanup.

[@GarageGear]

@@BenNawrath another couple of weeks and we’ll be in full swing!

[@nwestra]

I bought this spreader 2 years ago from a big box store for $100 cad. It’s was well worth it back then. Now they’ve double the price to compete with more commercial spreaders and I’d say it’s not something I’d pay that much money for. Still a pretty good spreader but definitely not commercial quality

[@GarageGear]

Thanks for sharing nwestra

[@stevenle1760]

I have the Echo RB-60 too and have been using it for years. Have spread thousands of lbs of lime, fert, herbicides with it. A few weak spots I've found. The rear feet plastic plugs fall out cuz it drags like you said. Lime will really rust the legs so wash it after each use. The plastic agitator can come loose and pop out. And finally product can have a hard time flowing out at 10-20% full just as you noticed. I also wish it had a lock open so when your doing 1+ acres it's not fatiguing.

[@GarageGear]

Thanks for sharing your feedback Steven!

[@liljoeii6091]

We buy one not that long ago too. we want some spreader to spread for get rid of a groundhog it didn't work so well. Spreader work well. The stuff we put in the spreader didn't work well and I still can't get rid of that groundhog but THANK YOU FOR THE VIDEO

[@GarageGear]

Hey Joe are you sure it’s a ground hog?

[@carado1984]

You bought a spreader when you needed a .22 rifle. Having the right tool for the job is half the battle.

[@jerzsubbie]

Thanks for doing such an informative and concise video! My Scott’s mini is too small for my new 1/4ac lot, not to mention the poor quality. This Echo seems to fit the bill perfectly!

[@GarageGear]

@@jerzsubbie you got it jerz! Thanks for watching

[@pats300zx]

I upgraded to the RB60 from my old Scott’s spreader. One of my complaints is that sometimes the side deflector falls down when I am spreading and you don’t realize it until you are done. I have to see about tightening it. As for the actuator I have seen some add zip ties to it to help with the mixing.

[@GarageGear]

Hey pats!the zip tie trick seems to be a common fix for this guy! We’ll see how she does going forward! Thanks for the info!

[@donschlonski2936]

What is the zip tie fix?

[@chumchum2543]

I stick with my Scotts drop spreader, it spreads the fertilizer evenly and my lawn is the envy of the neighborhood, besides it was not expensive, a neighbor was throwing his out, so I picked it up for free (and these was nothing wrong with it)!

[@GarageGear]

Thanks for sharing chum

[@Z28L98]

I used the Scott's spreader for years and never really liked it. I bought the RB60 last year and is a massive upgrade over the Scott's in my opinion. Exceelt review JB. Especially about the bump and grind, 😂.

[@GarageGear]

Thanks Z28 for watching! Jumping up to the echo for you must have been a big day! 👍

[@TheLawnLover]

I almost bought this model a few years ago, but went with a Spyker instead. Both are MASSIVE upgrades over the old junk scotts spreaders haha At this rate you can use it for ice melt since winter seems to not want to leave 😂

[@GarageGear]

Heard good things about about that spreader as well! Perhaps I’ll give that one a spin next year. Probably should try the ice melt with it! lol! Have a good weekend brother!

[@pj1080]

Are there better options? Yes! I have had this one for two seasons now and it does everything I need. Seems to be a good choice from the standard Scott’s spreaders

[@GarageGear]

All around it’s a great spreader! Thanks for watching!

[@edrodrigues5623]

I don't know to much about that but do know we got 5"+ of heavy snow and I already put the snowvlower away for the year. Just took 3 Advil for the back..

[@GarageGear]

Hahahah funny my back is hurting too because my snowblowers are all tucked away. lol! Have an awesome and relaxing weekend ed! 👍

[@jaybooth4815]

That’s a beefy lawn spreader JB! Bump and grind…..not going there..😂😂 too bad those legs couldn’t retract or flip up. Or maybe “U” shaped. That could probably put down some serious ice melt too! (Got to use the JD this morning and snow blowed 4 driveways.) made my neighbors happy. Great video and explanation JB! Cheers buddy.

[@GarageGear]

Morning Jay! There’s a lot of remarks that could ah e been taken a few ways with this one lol! I think if they just shortened the legs one inch that would be enough to get them up off of the ground. Surprise March snow storm caught us all off guard. I already fertilized lol it will all be gone by Tuesday. Then I think we’re in the clear. Thanks as always for watching bud!

[@mundayoreo]

I used to work at a hotel. We used a similar spreader in the winter for ice melter pellets in the parking lot. Very efficient !!!

[@GarageGear]

Oh yeah! You could use this for that! 👍

[@shaggyjohn1762]

I also have one and I to find the fert. getting stuck in between the plates every time I apply fert. and end up dumping some on the grass. Kind of annoying.

[@GarageGear]

Thanks for sharing John! 👍

[@nealwhite1474]

I replaced my junk Scott's spreader with the Echo (on sale back in December). My only complaint is having issues getting the last bit of fert through the hopper. Wish there was more of an angle so the fert could fall down faster. Other than that it's been great. I'm over 6 feet tall and this thing has saved my back unlike the Scott's spreader which was a nightmare.

[@GarageGear]

Thanks for sharing Neal! Those Scott’s spreaders are definitely small!

[@glenpacyna70]

I absolutely LOVE the news paper clipping from Back to the Future 2!!!!

[@GarageGear]

FAVORITE MOVIES OF ALL TIME! Thanks for watching!

[@glenpacyna70]

@@GarageGear I have to ask, where'd u get it from??

[@GarageGear]

@@glenpacyna70 my wife got a copy of the USA TODAY paper back in October 2015 at her work when they printed them. Had it laminated so it wouldn’t get ruined! Then hung it in the garage after we remodeled. 👍

[@glenpacyna70]

@@GarageGear that's awesome!

[@tailhook44]

It’s a massive upgrade to my Scott’s. As you mention. The only thing really that I think needs to be upgraded is the agitator.

[@GarageGear]

Agreed my friend! I think a modification is in order!

[@The_Mace]

0:00 - "Look at the size of this thing compared to my old one." That's what she said! 😂 1:21 - "I can tell you right off the bat, this thing feels really beefy in your hands." That's my favorite pick up line! 🤣 Too easy, JB. 😂

[@GarageGear]

lol ah man I thought you’d be all over the “ bump and grind “ I really should make a video with just innuendos the whole way through! One of these days we’ll collaborate! 👍🤣

[@The_Mace]

@@GarageGear I'll leave the "bump 'n grind" stuff to you and the Garage Gal. 🤣

[@GarageGear]

@@The_Mace haha thanks mace! Now all this stuff is coming to me! We could have went in so many directions with the flow rate, agitator and side spread control.🤔

[@gregoryeditor6500]

I have a Scotts spreader just collecting dust in my garage. I can live with the clover and weeds. I would rather speend my money on food.. Good review JB

[@GarageGear]

My ocd can’t handle them Gregory! I lose my mind lol! Appreciate the positive feedback my friend! What’s the plan for the rest of the weekend?

[@gregoryeditor6500]

Just take it easy. On Tuesday I will find out when I will have right knee replacement. Not looking forward to it.@@GarageGear

[@GarageGear]

@@gregoryeditor6500 oh jeez! Prayers for You my friend.

[@gregoryeditor6500]

Thanks Jared@@GarageGear

[@davebennett8239]

Hi JB .. kinda related question; I've got an Agri-fab tow behind spreader that is relatively new, used about 4x and the wheels have seized up. I've lubricated the heck out of it, loosened bolts, disassembled and .. scratching my head what it could be. Thoughts ?

[@GarageGear]

Is the gear box locking them up possibly?

[@davebennett8239]

Also thought that but there's not much to this piece of equipment, incl gear box @@GarageGear

[@3rdyellow]

You can reduce the setting when using edge guard to put less product.

[@GarageGear]

That’s not a bad idea!

[@RussC123]

Nice video man. How far apart are your walking paths on this? And are you throwing back to the footprints of your previous path or is it just a slight overlap of each swath? Thinking about getting this as a compromise between the scotts stuff and $300+ Lesco.

[@GarageGear]

Hey Russ! I throw back to the wheel paths of the previous pass. Works out great! I’ll also be doing a comparison video on this spreader vs an earthway! Stay tuned!

[@RussC123]

@@GarageGear awesome, thanks. The earthway and rb60 are actually the ones I’m trying to decide between.

[@GarageGear]

@@RussC123 ROCK ON my friend!

[@amywolfe6100]

Why not a deflector on both sides? I like a drop spreader that can precisely put the material down where you want it.

[@GarageGear]

Most spreaders have it on just one side. More sides means higher production costs and higher price tags. Thanks for watching amy

[@jeffreycaban5107]

Couldn't help but notice the old school Chiltons Gas Cans in the Garage. I have several myself and I am handing them down to Kids so they never have to experience todays Crappy Gas Cans.

[@GarageGear]

Hey Jeff! Today’s cans are garbage! They leak and spill far more than the chiltons I have. I got those for $5 each at a yard sale! Can’t beat em!

[@jerryd1434]

I bought this RB-60 two seasons ago and not that satisfied with it on long term use. The spreader gearbox shifts around on the axel as nothing keeps it centered, had to modify and put electrical tape at each side to keep from moving off center. Also, after probably using the spreader 12 times the spreader cable wire fractured at the bottom side plate. Cable is very under engineered and quite wire thin. Had to argue with the Echo warranty folks to cover this as they claimed this is not covered by their 5 year warranty even though I purchased it 2 1/2 years ago and only limited homeowner use. They finally covered the replacement but acted like they were doing me a favor rather then providing good customer service to stand behind their product 5 year warranty. Agree next spreader will be a Lesco one, guess you get what you pay for. Anyone else have their cable fracture at the bottom base plate?

[@GarageGear]

@@jerryd1434 hey Jerry thanks for sharing this with the community!

[@mattbannon7657]

As usual bullseye with the review… I have had mine for two years and do 90k sq ft with it 3-4 times a year…I do drive my truck through the area and drop bags so I don’t have to keep coming back for them which makes it a little easier and my only heads up is to keep an eye on the “feet” early on mine lost one of the black plastic plugs and when I would rest it down the tube would fill with dirt, not a big deal but something to be aware of, I want it to last contacted Echo and they sent me two new plugs… it’s a good tool that helps me with a big job at a fair price

[@GarageGear]

Thanks for sharing this information Matt! Sounds like you really put this spreader to the test! 👍

[@mattbannon7657]

@@GarageGear pretty maintenance free other than washing it down after use great tool for the job and saves me a bundle compared to a lawn service

[@GarageGear]

@@mattbannon7657 that’s great!

[@mablenay]

The cable broke on my RB-60 twice. I went big and got the Spyker Ergo-Pro SPY50. No more cable system (on-off lever), fine-tune spread pattern, fine-tune dial/prill setting, adjustable handle for small or tall user, enclosed gears with lifetime warranty. and holds more than the rated 50lbs. But yeah it was over $500 vs under $200 for the RB-60

[@GarageGear]

Thanks for sharing this mable

[@rolomoloko]

Spyker is the Best dude!

[@rph3144]

Bought this spreader. Huge upgrade over crappy Scott’s. Scotts hollow wheels funnel fertilizer in to lines, which creates green lawn stripes.

[@GarageGear]

Enjoy the spread my friend! 👍

[@rob2669]

Thanks for the info on this JB! Seeing as how we were under a winter watch here in Hamilton Canada...yeh maybe an inch , gone today...lol Glad to see the summer season videos, means we are on our way... Just watched your Short Video on the Scotts Fertilizer, wished i could use it on top of my head !! 😂😢😅 Thanks JB! See you Round The Outside 🎉😜👍

[@GarageGear]

Same here brother! Summer is on its way. Plenty of gear and vids are coming soon! I’m glad it all melted our way too! 👍👍😃

[@rob2669]

@@GarageGear great JB I never get bored of them!! Can't wait now to work on my firepit now 🎆🔥

[@GarageGear]

@@rob2669 appreciate you Brother! Catch you round the outside! 👍

[@jeffbolster7831]

Someone needs to 3d print a better agitator for this. Something that is a little longer and sits lower in the hopper. I have had mine for 2 years and works good besides the agitator

[@GarageGear]

Sounds like a great idea!

[@extremelawncareandlandscap4885]

Pex tube

[@GarageGear]

@@extremelawncareandlandscap4885 that just may work!

[@apexiumim2741]

Another great review JB! I’ll be using the stainless steel 4’ wide professional drop spreader I found thrown to the curb last year. It’s all cleaned up and looks brand new. Any chance you can snap a pic of that chart and post it on your channel? It snowed all day yesterday.. only about 6cm of the wet heavy stuff. I’m NOT shovelling… Mother Nature will take care of it for me 😂 Cheers!

[@GarageGear]

Hey Apex! I’ll see if I can get a picture up. It’s super handy to have. That spreader sounds like a monster and for a great day! At this point in the season, I don’t blame you for putting the shovel away. Hope you have a good week.

[@justinwilliams3604]

Should have went with a Lesco spreader..

[@GarageGear]

Lescos are great just not every homeowner can afford them! I decided to go with a more budget friendly option

[@donschlonski2936]

Why are you here?

[@AngryMountainMan]

Which one do you like better? I have an earthway but don’t like the “edge” guard system it has. I’ve been looking at the echo

[@GarageGear]

Still trying them out! Both seem to work well. Possibly will be doing a video on this later in the year.

[@Chris-bf7op]

Hey I Want to get rid of clover what the best answer ..... keep up the great work.

[@GarageGear]

The concentrated mix in weed b gon does a good job for me. Clover is tough and usually takes a couple weekly applications.

[@RonaldParrish-j4e]

Worst spreader I ever purchased. I bought that 2 years ago and my fertilizer always got jammed in the plates and wouldn’t close the gate.

[@GarageGear]

Thanks for sharing

[@srtswpak47]

I have had it 2 years as well. You have to be rough and rapidly when opening and closing it to avoid jams. Do not be gentle with it.

[@GarageGear]

@@srtswpak47 appreciate you letting me know my friend! 👍

[@KDlGG]

Genuinely curious what sized prills is your fert? Really small or pretty big?

[@garydunnjr8176]

lol hard to put fertilizer down when we have snow …ughh let it be spring already

[@GarageGear]

lol oh yeah! Soil temps are well below freezing today! Thanks for watching Gary! 👍👍

[@BigDaddysGarage]

Defiantly gonna check this one out!

[@GarageGear]

ROCK ON FLINT! It can really chuck it! 👍👍

[@smallblock412]

My brother bought this spreader last year, he likes it.

[@GarageGear]

It seems to be a popular one in the fertilizing world! We’ll see how she does the rest of the season! Have an awesome weekend Smallblock

[@martyariemma5604]

Would you recommend? I still have the Scott’s and want a better quality broadcast spreader

[@GarageGear]

I definitely would marty! So far it’s working out great! This would be a big upgrade for you

[@martyariemma5604]

@@GarageGear definitely will get one!

[@beverlyc.8175]

I'm still using my 35 year old Ortho broadcast spreader.

[@GarageGear]

Those ones are great!👍

[@dbproductreviews6319]

Great video, as always!

[@GarageGear]

Thanks for being a cool fan DB! 👍

[@willmallory9085]

Thank you.

[@GarageGear]

Thanks for watching Will! 👍

[@montefiveforty1]

Liking my Scott's Elite works awesome.

[@GarageGear]

Thanks for sharing monte! 👍

[@davidplatt8915]

Great review JB. Thanks. These are nice units.

[@GarageGear]

Thanks for the positive feedback David! 👍 enjoy your Sunday bud!

[@electroddxful]

Great video as always JB. Get information. Have a bless weekend 👍🙏👍🙏

[@GarageGear]

This will be a fun fertilizer spreader to mess with this season! Thanks for watching Ray! Any plans for the weekend?

[@rickmuir7616]

Here’s a fault I’ve found with the Scott’s spreaders. It’s common with a lot of the units out there. They use wheels that have cavities to the inside. As you spread, they fill & then dump it, causing those over fertilized lines in your lawn. My solution was to fill the cavities with a disk cut from closed cell foam. Then just used tie wraps to affix them to the wheels. Seems to work.

[@GarageGear]

Thanks for sharing Rick!

[@kencurtis228]

TY for Sharing

[@GarageGear]

Appreciate you Ken! Have a good weekend!

[@mikehouser5430]

My issue is when pushing it just never drives effortlessly… like it’s meeting some resistance

[@GarageGear]

We’re the legs dragging on yours?

[@mikehouser5430]

@@GarageGear no … just never seemed it was freely rolling… I lubricated the gears no help

[@buffalobmf]

Spreading on the grass while i just got 5inches of snow last night

[@GarageGear]

Hahaha crazy weather right? Thanks for watching!

[@geezberry8889]

this or Earthway 2600A-Plus?

[@GarageGear]

That is yet to be determined. I’ll know more in a few uses! Stay tuned!

[@hipguide1]

Where do you get the Garage Gear sticker????

[@GarageGear]

GARAGE GEAR STICKERS Are Available (See Description) kzbin.infoQBdoTOVI7Sc?feature=share here ya go hip!

[@chriswagner6310]

My birthday was yesterday

[@GarageGear]

Happy belated birthday Chris! Did you enjoy your day?

[@chriswagner6310]

I sure did. Thanks my friend

[@philvelasco1363]

I don't see nothing wrong with a little bump and grind

[@GarageGear]

@@philvelasco1363 hahaha thanks for watching phil

[@woTrainingWheelz]

Have it, dislike is the kickstands get in way when doing hills/slopes.

[@GarageGear]

Sounds like we’ll have to modify these! Thanks for watching

[@bladerunner6087]

Got snow this morning 😂😂😂

[@GarageGear]

Haha right? This weather is wild! Thanks for watching blade runner! 👍

[@EddyP313]

What spreader do you use for your house?

[@GarageGear]

I’ll be using this one for the season but I have an earthway 2600a that I briefly show early in the video! 👍

[@jackcollins2344]

Just wondering what time of year was this video made because it is snowing in upstate New York today?

[@GarageGear]

This video was shot last week! Wild weather we’re having this spring lol!

[@garypic4083]

FERT?

[@GarageGear]

Hey Gary I mentioned what fert I was using in the video. Is that your question?

[@SonnyPruitt-q1s]

Too expensive.

[@GarageGear]

@@SonnyPruitt-q1s they are up there

[@EastCoastReefer]

Don’t buy this crap. The spread settings are inaccurate and burned the heck out of my lawn. Also, the last 10% of the hopper does not empty and you’ll need to bumpity bump it which will dump too much fertilizer which burns that spot.

[@GarageGear]

Thanks for sharing