What size bolt is the frame rail bolts. I know you said 16mm but what thread size
@etrailer Жыл бұрын
Some Tiguan models have the weld nuts installed in the vehicle frame, some do not. If it DOES have the weld nuts, the existing M10-1.5x40mm hardware would be used. If the weld nuts are NOT there, you'd use the 7/16-14x1-1/2 hardware that is included with the hitch. So, depending on the setup, the bolts used are either M10 or 7/16ths. www.etrailer.com/tv-install-curt-class-2-trailer-hitch-receiver-2019-volkswagen-tiguan-c12177.aspx
@bcrave4012 жыл бұрын
I’m looking to attach a trailer hitch that can pull a small trailer that fits a walk behind mower. Does this hitch i particular have attachments for this type of trailer? Or do i need to look into other trailers?
@AhmedSaad-xz5tv3 жыл бұрын
I have Tiguan2020 model , but I don’t have nuts in as the video , only empty holes how i know if it fits for my car or not ?
@etrailer3 жыл бұрын
The 2020 Volkswagen Tiguans that we have installed this hitch on have all had the hardware on the sides of the frame rail that is removed and reused for the installation of this hitch. www.etrailer.com/Trailer-Hitch/Curt/C12177.html
@augustoverastegui84733 жыл бұрын
My VW Tiguan 2021 doesn't have the nuts at the sides, only empty holes. Where could I get those nuts?
@etrailer3 жыл бұрын
If your vehicle did not come with the factory hardware, you can check with your local dealership to get a replacement set. www.etrailer.com/Trailer-Hitch/Draw-Tite/76192.html
@jayortiz51924 жыл бұрын
Is it absolutely necessary to lower the exhaust or was that done just to make things easier? Also, what was the torque wrench set to?
@etrailer4 жыл бұрын
You will not be able to lift the hitch into place without lowering the exhaust. It's not too bad a job to lower it. The torque specs can be found in the installation instructions on our product page. www.etrailer.com/Trailer-Hitch/Curt/C12177.html
@jayortiz51924 жыл бұрын
etrailer.com Thank you guys for the great video. I was able to do it in 35 minutes, even while using the car’s stock jack. Super easy installation and it looks awesome!