Beginners Brother KR850 ribber setup

  Рет қаралды 33,550

Buttonmouse The Wee Machine Knitter

Buttonmouse The Wee Machine Knitter

Күн бұрын

Пікірлер: 53
@dawnparenti9849
@dawnparenti9849 3 ай бұрын
Thank goodness I found you. I had no idea how to set my ribber up. Thank you! Very clear.
@curiousowl9922
@curiousowl9922 2 күн бұрын
This is the best tutorial I’ve seen so far…thank you for every detailed and clear explanation regarding each step! I’ve waiting for the delivery of my secondhand Brother KH881 machine and another secondhand Brother KR850 ribber next week. Am very excited to start this journey with other knitters worldwide. Although, unlike most of you out there knitting, I’m afraid I’m late into this craft! Could you also post a tutorial on what things to check out, clean or do when setting up a KH881 and how to maintain this, etc. God bless. Thank you!!!
@acceptingabnormal
@acceptingabnormal 2 жыл бұрын
I’ve never heard anyone discuss the tension mast like that and it was especially helpful!! That great info even without needing the robber info! Thanks!!!
@meintjezwerver9890
@meintjezwerver9890 2 жыл бұрын
After I spent several hours on the internet to find a simple and clear explanation, finaly found this. At last!!! Thank you so much
@dankanikolovski1193
@dankanikolovski1193 Жыл бұрын
I was looking for information about the mast because the instruction book didn't make sense. Your explanation was exactly what I needed plus I found out the bonus info about the needle positions and the distance between the two beds. Something I didn't even know I needed to be aware of. Thank you!
@tomaszjawskistudio
@tomaszjawskistudio 8 ай бұрын
Wow one of the best explanation how to set up ribber , thank you
@jackiehenits5239
@jackiehenits5239 3 жыл бұрын
This is the clearest video I have seen with respect to the ribber. You are very clear and thorough. Thank your time and the effort you put into your video. Well, well done and thank you.
@alexisdrewicki5538
@alexisdrewicki5538 3 жыл бұрын
Finally I feel I can attach my ribber successfully! Clear concise and well demonstrated instructions. I have been avoiding using the ribbing attachment which really limits the versatility in garment making. You have no idea how thankful I am to have stumbled upon your channel. Thank you.
@liepus1785
@liepus1785 Жыл бұрын
Thank you! Very informative and useful instruction! Finally, I have attached my ribber successfully! I have been puzzled about using the ribbing attachment.😒😒 I am so lucky and thankful to have stumbled upon your channel. Thank you indeed.
@maureenjmalyon3219
@maureenjmalyon3219 3 жыл бұрын
Such a clear and precise explanation! This made the whole process crystal clear. A video well worth watching, particularly when the booklets don’t always make it clear what you are supposed to do and in what order to do it followed by the checking procedure making sure you have done it properly. So, thank you very much. Brilliant!!!
@margaretshulman870
@margaretshulman870 3 жыл бұрын
Thanks so much for this video. It is very well done and has provided me with clear and concise instruction. Was lovely to hear your Scottish accent too. A wee bit of home for me. Thanks again.
@kathleenmccoy5262
@kathleenmccoy5262 3 жыл бұрын
Very helpful. My ribber has been in the too hard cupboard for quite a while as it has never played nicely . Turns out all it needed was a nudge to the right a mm. Did not know the two screws were the adjustment point! Knitting like a dream now.
@ljlotter
@ljlotter 2 жыл бұрын
Thanks, you're a lifesaver! I can never figure out how those ribber brackets go on.
@gaildirks9449
@gaildirks9449 2 жыл бұрын
Thank you for such a clear video and instructions for how to attach a ribber. .
@nancystengel7521
@nancystengel7521 3 жыл бұрын
Thank you so much! I have watched several ribber videos and found yours to be very clear concerning the adjustments I needed to make. Had to do some reading to get the ones for the KR260, but you gave me the clues I needed!
@ritagriffin2431
@ritagriffin2431 2 жыл бұрын
Thank you so much for this really useful video. I now feel much more confident to set my machines up.
@knitterkris
@knitterkris 3 жыл бұрын
I thought I knew all I needed to know! I was wrong. Great instructions!
@beaker-v9b
@beaker-v9b Жыл бұрын
Excellent video views with matching instruction and description.
@AuntieEm294
@AuntieEm294 2 жыл бұрын
Excellent tutorial! Good explanations to WHY stuff is set the way it is.
@shannonmariatong6290
@shannonmariatong6290 3 жыл бұрын
Thank you! This video was very helpful - in fact of all the videos I watched, yours was definitely the best! I've got my ribber aligned correctly now.
@LM-su2xw
@LM-su2xw 3 жыл бұрын
Thanks Michelle! I've had my ribber for a couple of months and knew something wasn't right. I didn't know you could unscrew it to reduce the size of the gap. Works much better now!
@chrissiemorris514
@chrissiemorris514 2 жыл бұрын
Very thorough and effective. Thank you
@h.l.8244
@h.l.8244 4 ай бұрын
Great view - many thanks!
@craftycaz
@craftycaz 2 жыл бұрын
Great video. Just about to set one up for the first time. Thank you
@Cobracobalt
@Cobracobalt 2 жыл бұрын
Thank you so much for this great video, I was lost and you made my day!
@jay_cadiramen
@jay_cadiramen 5 ай бұрын
Excellent video
@crivensro
@crivensro 11 ай бұрын
Thank you so much for this very useful video!
@yvonneyu4480
@yvonneyu4480 2 жыл бұрын
super clear setup tutorial thank u!
@mazrobsuzi
@mazrobsuzi 3 жыл бұрын
Brilliant video Thanku so much I have a much better understanding of adjusting my ribber and setting it up now x
@hesjane
@hesjane 3 жыл бұрын
Super helpful video. Thank you so much for taking the time to share your knowledge. A very concise instructional video.
@Amys_Crafts-N-Things
@Amys_Crafts-N-Things 3 жыл бұрын
Love this video. Thank you so much! I knew the ribber needed adjustment, but couldn't quite understand how to do it. One question though, the peg that connects the two carriages together does not fit the slot all the way up..it goes about halfway. Is there an adjustment to that I can do? The two beds I am using are the Kr850 ribber and KH950 knitting machine. Thanks! 😊
@hal7ter
@hal7ter 3 жыл бұрын
Maybe she could check her comments and answer you...
@elviscastro6377
@elviscastro6377 9 ай бұрын
gracias
@rosaliavidalf2535
@rosaliavidalf2535 2 жыл бұрын
Hola gracias muy bien entendido..🇺🇾🇺🇾uruguay 😍👋
@rosedaisy6630
@rosedaisy6630 2 жыл бұрын
この微調整、力はいるし繊細だし難しかった😂教えてくれてありがとう!Thank you😊
@georgieknight6499
@georgieknight6499 3 жыл бұрын
Hiya! Great video and well explained! I wonder if you could help me with a problem I’m having with my brother KH-891 and KR-850 ribber attachment. The main bed appears to work perfectly as a single bed, however when attaching the ribber, the carriages struggled to knit correctly without jamming or causing problems and was very squeaky. After a deep clean of the ribber bed and a good oil there is no squeaking and the needles appear to be moving smoothly. However after a little bit of knitting a full rib the carriage began to slow down and squeak and feel slightly restrained, almost jamming it feels going from right to left but not the other way. I have double checked all possibilities I can think of, needles, oiling, fluff, ribber alignment, ribber height, check under the carriages, but I just don’t know what could be causing this. Any help would be much appreciated :) p.s. I don’t know if this has anything to do with it but is the ribber carriage meant to have a little jiggle room if you pull it towards you or should it be completely secure to the ribber bed with no movement ? I hope this makes sense ! Many thanks, Georgie!
@buttonmousetheweemachinekn6344
@buttonmousetheweemachinekn6344 3 жыл бұрын
There could be a few issues causing this and without seeing exactly what is happening during the process it would be hard for me to pinpoint. The ribber carriage does not lock into its own bed so the only thing holding it in place would be the sinker plate, just ensure the sinker plate is seated correctly.
@rachelcannings286
@rachelcannings286 2 жыл бұрын
Hi Georgie, I am having the exact same problem with the exact same machines, did you ever work out how to fix it? Thanks
@jonialm2664
@jonialm2664 3 жыл бұрын
Very helpful - thank you!
@NotQuiteEnoughYarn
@NotQuiteEnoughYarn 3 жыл бұрын
Thank you. That is a great video.
@khadijaidlhaj2093
@khadijaidlhaj2093 2 жыл бұрын
❤️
@joanitabyayesunamono8009
@joanitabyayesunamono8009 2 жыл бұрын
👍
@patriciarelph1347
@patriciarelph1347 3 жыл бұрын
Hi hope you can help me I have a KH 830 knitting machine and ribber when I set the machine to knit 1x1 rib it does not connect yarn to the main bed Thankyou
@inesquezada9747
@inesquezada9747 3 жыл бұрын
Hello! Thank you for your video! I have one question, how can I avoid the needles of the ribber bed from colliding with the main bed's gate pegs when the ribber is on H position? And is it normal if the ribber brother kr-850 doesn't have a sponge bar, it only has a plastic bar. Thanks again and regards!
@buttonmousetheweemachinekn6344
@buttonmousetheweemachinekn6344 3 жыл бұрын
The ribber here for this machine it is a plastic bar, ensure when the bar is inserted that the two edge ridge side faces you. As for your question on ribber needles colliding with the main machines gate pegs, this should not be happening and could be an alignment issue or a damaged machine. If you manually push the needles up and down on the rubber bed there should be no collision or contact with the main bed parts.
@ninalfbr1077
@ninalfbr1077 2 жыл бұрын
👍👍👍👏👏👏
@missblairwood
@missblairwood 2 жыл бұрын
Hello, when I set this up the carriage on the ribber bed keeps falling off... have you ever encountered this, is there any way to secure it ?
@buttonmousetheweemachinekn6344
@buttonmousetheweemachinekn6344 2 жыл бұрын
if it is falling off after you have set up the ribber then I'd suggest that perhaps the back rail is not seated properly. However, if it is simply falling away from the bed (the top edge as such) then it could be the angle of your setup. It should stay in place when in use with the ribber connector arm but there is no front guide rail for the top of the carriage to secure to the ribber bed on it's own.
@ТатьянаКруглова-у4ч
@ТатьянаКруглова-у4ч 8 ай бұрын
Супер!
@ضوءالقمر-ن4ق
@ضوءالقمر-ن4ق 11 ай бұрын
،👍👍
@СветланаИгнат-ф3щ
@СветланаИгнат-ф3щ 2 жыл бұрын
Где можно купить в канаде Альберта машину
@laurafantilli4145
@laurafantilli4145 3 жыл бұрын
vorrei il vostro aiuto non riesco a trovare istruzioni per 2 fromntura per fare tubolare inizio e coste 3/2 quale pulsante alzare potete aiutarmi anche con un video grazie
@yvettemeunev6263
@yvettemeunev6263 2 жыл бұрын
jracheter une machine a tricoter a carte mes carte ne fonctione plus
Knitmaster / Silver Reed SRP60N Ribber setup
14:14
Buttonmouse The Wee Machine Knitter
Рет қаралды 15 М.
Ribber Brother KR 830
20:58
Helen “Knittingfingers” Siers
Рет қаралды 18 М.
Disrespect or Respect 💔❤️
00:27
Thiago Productions
Рет қаралды 34 МЛН
REAL MAN 🤣💪🏻
00:35
Kan Andrey
Рет қаралды 32 МЛН
amazing#devil #lilith #funny #shorts
00:15
Devil Lilith
Рет қаралды 18 МЛН
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 27 МЛН
I bought another knitting machine | Brother 950e haul
9:44
KnitFactoryImpl
Рет қаралды 3,3 М.
Knitting Machine Ribber | Setting Up Your Ribber
5:42
Love Your Knitting Machine
Рет қаралды 11 М.
HOW TO ELIMINATE THE WAVY EDGE ON RIBBING
9:27
Sally Butcher’s Kalamunda Krafts Machine Knitting
Рет қаралды 10 М.
Ажурная каретка Brother. Вязание от А до Я.
17:42
Пряжа от VizEll
Рет қаралды 13 М.
Setting up Brother KR260 ribber chunky KH260 knitting machine
15:24
Scarlet Peate Self Sufficiency & Crafts
Рет қаралды 5 М.
Ribber Cast On
3:54
Susan Guagliumi
Рет қаралды 48 М.
How To Set Up & Use The Brother KHC-820A - Single Bed Colour Changer
32:09
Thesweaterfactory
Рет қаралды 4,3 М.
Making a sock on a Brother KH-910 with ribber attachment
7:07
KnitFactoryImpl
Рет қаралды 7 М.
Setting up a Brother Ribber
12:25
theanswerladyknits
Рет қаралды 30 М.
Disrespect or Respect 💔❤️
00:27
Thiago Productions
Рет қаралды 34 МЛН