Behind The Scenes at GenRight Offroad's Facility

Behind the Scenes at the GenRight Offroad facility in Simi Valley California.
genright.com/
We wanted to start a series where we can give you a back stage pass to different off road and automotive shops. See what it takes to make the parts, the people and how they got started in the industry. We hope this video brings some light to the inner workings of GenRight and also allows you to decide where you would like us to go next? Make sure to comment down below for us to know what shop or company you'd like to see how the inner process works!! GenRight stands for Genuine Parts Engineered Right, it was started by Tony Pellegrino and established in 2006.
*********************************
Like this video? Check out these:
Midnight Metal Works: • Video
BleepinJeep Shop Update: • Bleepinjeep Shop Updat...
D and C Extreme: • How To Install A D&C E...
Don't Mess with Texas: • Don't Mess With Texas!...
Abandoned Jeep Rescued after 20 Years: • Abandoned for 20 years...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZbin: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

[@JDR1971]

The welds on the Genright stuff are absolutely fantastic. The guys that do the welding there actually give a shit!

[@GenRightOffRoad]

Thank you! Our welders take a lot of pride in their welds!

[@bullittdog4352]

I love how the guy that does the welding never thought how long he worked there till just that minute!

[@Tunaslayer1]

The guy that does "Welding" is an artist!!! Those welds were beautiful!!!

[@denniscasey986]

There welds are outstanding!

[@GenRightOffRoad]

Thank you! We take a lot of pride in our welds!

[@robertboyd3429]

Love bleepin jeep... always have ..💯👍

[@tatehogan5685]

Definitely love to see more behind the scenes from people that love the sport as much as we all do. Passionate people make practical parts!

[@phreak61]

Love the new series. Can't wait to see what comes next!

[@GenRightOffRoad]

Awesome Video! Thanks for stopping by!

[@ashtonmariefranklin725]

I love seeing, product companies behind the scenes, it shows everyone who the company is and the people who are building their products. This stuff is so neat. I love also seeing the R&D behind stuff that is made for production

[@randyjohnson3712]

That was cool. I've always liked seeing behind the scenes stuff. Keep it coming...

[@protacodan4225]

Nice insight into the industry. Thanks

[@nuttinbedder2do70]

You fellas have put out another quality video. Keep them coming

[@knightshappyfarm]

Awesome video! Great idea and gives me a better picture of this scene. Thanks Colt and Matt

[@yoyartube]

Awesome concept! More more more ! Nicely done.

[@StormbornJKU]

This will be a badass series! I absolutely love Genright stuff. It’s definitely super high quality and badass parts and equipment. It’s expensive, but it seems the quality is worth it. Maybe one day I’ll be able to get some Genright stuff.

[@grantnames8152]

I’d love to see behind the scenes of Poly Performance/Synergy manufacturing. I’ve been there and it’s very impressive.

[@darren1922]

This is going to be a good series! I always like to see how things are designed, engineered, and produced.

[@Fix_It_Again_Tony]

I'm not a Jeep guy, but Genright has got a very respectable operation going.

[@GenRightOffRoad]

Thank you, we appreciate the kind words!

[@evintacy7272]

What great episode! Thanks Matt!! I got get some GEN parts !

[@MidnightMadness4x4]

A little jealous lol. The King of the Hammers DVDs are what got me into the Ultra 4 stuff. Specifically the features of Tom Wayes, Tony Pellegrino and Erik Miller from HeavyMetalConcepts.

[@ericthompson2920]

The quality of their products is unreal! Their customer service is fantastic. My entire Jeep is GR and I've bothered them plenty of times and Tony himself will chime in when needed. Even the packaging for shipping is top notch.

[@samwalker3441]

Great look behind the scenes. I learned all kinds of cool stuff about GR. Please do more of these episodes. And anyone who is interested in making their Jeep better should check out Tony and the weekly Tech Talks.

[@psg6314]

Great video and very informative and keep up the good work God bless from GA and happy holidays and stay safe

[@brettwright6922]

This was cool to see people really dedicated to quality

[@Joshua-bp9nl]

I was thinking the same thing as Matt, no Cherokee stuff.. LOL... I want to give a shout out to Matt, Miss your instruction videos. Best there is when it comes to the XJ. Everyone always talking about Matt's off road, FabRats, Robby, and Roy. Bleeping Jeep is what got me going down this rabbit hole and was the first... Thanks Bleeping Jeep.

[@davebanks7435]

Awesome: from little old New Zealand the scale of GenRight is just mindboggling!! More please guys!!

[@Skiridr22]

Great video thank you Colt & Matt 👍🏾

[@DownNDirty_OffRoad]

Really good video. Seriously didn’t know they made all of that and found the company very impressive!! Even though they don’t do much Cherokee parts for Matt!!

[@Stephenja]

G'day guys. Great 👌 video. it's cool to see where you guys get All the ready made parts.

[@davidbeers5949]

Show us more... Thumbs up!

[@freeidaho-videos]

I like this. GenRightis the way it should be everywhere. I'd like to see other USA owned companies with USA manufacturing. How about Barnes?

[@jasonfessler4763]

Their stuff is top notch!!

[@dixiemae5042]

Holy cows. Cole’s a giant 😳

[@SkooledINC]

Grew up in simi and used to see him driving his jeep to work when I was going to school haha

[@330JFOX]

It’s expensive but works and looks amazing 04 LJ with Genright aluminum fenders front and rear corner guards and roll cage

[@robert5712]

Very good interviewing and very good Genright presentation. You guys are the real deal in off-roading and American ingenuity.

[@chrisc2431]

Great video! Head over to metal cloak while you’re in Ca. Love the contents guys!

[@pattkinder612]

More please.😎👍

[@oldschoolmoto]

dam welds look nice genright is good stuff toni been around long time meet him up rubicon yrs ago nice guy

[@josh26050]

From Ohio and when ever I’m visiting family in Simi valley I look around to see if I can spot any Genright rigs

[@dalecrosby8751]

This is beyond fun and educational - it's inspiring as well. I can see younger people (I'm older than dirt) wanting to get into this field of CAD/fabrication - whether or not they are enginerds (have an engineering degree) Looking forward to this series - YES !!!

[@Tunaslayer1]

Dale.... OLD GUYS ROCK!!!

[@phillyb4588]

Nemesis Offroad love to see

[@mikehoffman3690]

Great story.

[@thomasbrown3001]

I also had genright bumpers on my TJ

[@evintacy7272]

That was great! I have been looking for some aluminum bumpers! Now all do is get the cash! Thanks colt! Helped me a ton sir! 😊

[@grantgallatin5827]

The behind the scenes is a cool educational idea

[@grantgallatin5827]

Hell ya! I'm excited! Sorry, I've watched all the videos and still ain't sure what I've won lol

[@graemethompson340]

Well done guys loved that one looking forward to seeing more cheers for now

[@ty_thejeepguy]

Aye, Square headlights all the way!

[@shaolin224]

Oh man! You guys were here in socal. Hope you enjoyed the weather

[@gayle4804]

Amazing information thank you for sharing

[@austingraft9740]

I would love to see a behind the scenes of Motobilt. I use a lot of their parts.

[@susimaloney4796]

Great video, really enjoyed behind the scenes

[@tonyknott6974]

Nice series, I love that stuff.

[@brettnipps7205]

Great interview and video!!

[@thomasbrown3001]

That was pretty interesting

[@robertquackenbush5547]

Anywhere you and Matt want to show behind the scenes videos from are fine with me like big tire and American racing rims

[@lisaharvey4373]

Super kool guy and his awesome company great video guys super information

[@_real_ask]

That was great, I love to see high quality design/manufacturing facilities, thank you!

[@SSTANDLEY3557]

I have never been off roading. I think it would really scare the, you know what out of me, but I love the videos and watching yall do it. Thank you for starting the behind-the-scenes videos. all of this is really interesting to me. Keep up the good work. Love you guys. yall make a great team.

[@Vgrizzw]

Remember the toys-r-us shopping sprees…imagine you had 5 minutes to race through the GR warehouse! READY! GO!

[@ShortStackJK2015]

Visit Dynatrac, like seeing American made companies behind the scenes with Bleepin Jeep!!

[@granitesand78]

I got their XJ fuel tank a couple years ago and it’s amazing. The armor plate shell got bent during delivery and they warranted it immediately. Absolutely fantastic work and one of my best upgrades. My only complaint is I see my friends putting genright cages into their wranglers and they don’t make an XJ one :(. When will someone make a nice XJ cage??? /cry

[@t_n8435]

Awesome! You guys came to Simi and I didn't see you lol

[@dandahermitseals5582]

Very Kool. Wish I was in the income bracket to shop at his place. But I have a Comanche Pioneer Metric ton and don't figure he has anything. I need a 4 1/2" lift and a strong winch bumper with substantial shackle mounts I can mount a snow plow to with a stinger to hang a cable pulley in to lift my plow. Also a husky rear bumper with a receiver tube. ALLWAYS watching you guys and would like to know how that gall who had that radicle roll over crash is doing ?? Guess her jeep was totalled. Glad she had a real roll cage and a 5 point. Thanks Dandahermit PS --- we live up in the mountains NE Washington above the snow line. Most of our challenge and hair raisers are in the snow. Would like to see climbers in the snow??

[@OjaiBonsai]

Great video thanks

[@jasonadams4344]

Great video and cool idea on the series! I really enjoyed this one, can’t wait for more.

[@harveystephens6115]

Quite a process and nice

[@Ramblin_Rob]

Good Stuff guys. Keep it coming

[@greggneedham7658]

Great content!! What’s next?? Stay tuned 😜

[@michaelcook184]

Absolutely

[@kundrew1990]

That welder is an artist...Amazing thanks for all the vids.

[@garycarter8332]

Good video! Like hearing about company’s that support jeeping hobby! I do have a question for Matt. When we getting an update video on Hope’s JL? Would like to know what happened to it in Colorado!

[@robertquackenbush5547]

Very informative video colt

[@muddiver91]

Love this series Colt !

[@T1DSUX]

Great video

[@tonyb2086]

GenRight Offroad looks like a quality shop, the XJ gas tank is interesting. Makes me wonder if it's worth buying that or sticking w/the poly tank in the y2k and buying Jcr's skid. Anyways, Rusty's would be a good show for sure👍

[@mikemathis3936]

Id like to see racing tires being made

[@koreywilliamson3737]

I like the idea of this series I would like to see adams,motobilt, barnes

[@magnithejeep1865]

Like this content!!! how about Rustys....?

[@ronnydowdy7432]

I like this video

[@abeldaryan7739]

This was awesome! Can you do DCD customs

[@tntzimmerman9552]

Def gotta do Ruffstuff and ORD.

[@marcmmclellan]

I wish I knew you guys were on the West Coast!

[@jeepindave5464]

I'd love their cage kit for my yj but I'm on a rough country budget

[@RENEGADEX800]

Nice components

[@BubbaMurica]

Metalcloak!

[@bluerhino_jk]

You should check out MetalCloak.

[@fogstain]

I really love the GenRight stuff. If only I wasnt poor...

[@ChrisTuller]

would be nice to see a comparison to MetalCloak now.

[@mikes.9755]

We need Bleepin Colt to wrestle the owner of Advanced Adapters.

[@royrodriguez8460]

Any chance we can get a tour of the motobilt facility? Thank you 😍

[@daledubose3032]

Did Genright start from buying Blue Torch Fab?

[@GenRightOffRoad]

We did not. We got our start making gas tanks that allowed you to stretch your wheelbase and started making more products from there.

[@bradwinter156]

Can't afford to live here but you can't get a better taco

[@jeepindave5464]

Holy crap that jl frame is 29k 😲

[@Blastfence1]

Where the old Jeep Willys made with Model T vanadium steel!

[@ninja63639]

Can you do Rockhard?

[@djeteks]

RK would be cool.

[@robbanks7393]

Undercover Fab

[@ferrasrotator]

Barnes off road tour?

[@lilnapsak1828]

their xj gas tank is soooooo nice but its a fortune

[@austinskidgel2690]

Metalcloak or a local small Sacramento ca shop. Support small business