Behringer Europower PMP3000 dyno, real life audio output power test

[@311superfly]

did you bridge the channels for maximum advertised output through only one channel?

[@viocaia]

Never. like stereo

[@luismontana5586]

Hi,by any chance do you have the diagram for this console?I'm having problems and I need the diagram,I'd appreciate if you could help me,thanks so much

[@viocaia]

I only have PMH3000, but you can download here clubdediagramas.com/archivo/audio-equipos-de-musica-amplificadores-reproductores-etc-a7/behringer-m1214/behringer-pmp3000rar-f121396.html

[@chargen7224]

Subscribed : VERY INFORMATIVE thank you Sir... would you perhaps do a demo that has the KICK compressed and with effects. I like the techo.

[@viocaia]

Hey! I can't have a power test based on Kick short impulses with or without compression , this test needs a sustained sound.

[@MrPeterbennett]

what speaker watts and ohms do recommend for this mixer?

[@viocaia]

As you can see from testing results, the power is around 450W in 4 ohms..so you'll need at least a 500W loudspeaker with 4 ohms or 300W in 8 ohms. Like a rule, higher speaker power never hurts! You can use 2000W boxes...as long as you are in the impedance limits , min4 ohms everything will be ok! But if you intent to use smaller...well, that's depending of your common sense, use the volume carefully, you can feel when a loudspeaker is overdrived. Finally: min 500W for 4 ohms, at least 300W for 8 ohms and 1000W min at 8 ohms in bridge mode.

[@TRILERish]

Is it now a clean signal 2 X 446 Watts ?

[@viocaia]

Yep, a single frequency per test

[@TRILERish]

@@viocaia There are two outputs for speakers. That means 100% 2 x 446 watts or ?

[@viocaia]

@@TRILERish right, there are two power amplifiers, separate outputs. Also, it can tied in bridge for a mono double power output.

[@TRILERish]

@@viocaia tanks for info :)

[@311superfly]

just bought pmh3000 today for 50$. I don't have speakon cables yet so I can't comment on its amplifier but everything else like vocal muting! working through the monitor out.

[@viocaia]

It's a really nice mixer, easy to install and carry around.

[@antreaskonstantinou8585]

So 416w per channel or total

[@viocaia]

Please see the video at 11:15 , you got all the resuslts.

[@scottchilds5726]

Thank you

[@viocaia]

Thank you too

[@djpaul146]

Hi I've got the same mixer it only costs me £20 a bargain

[@viocaia]

Go for it! It's amazing good sound..for the money if course!

[@viocaia]

If you sell it let me know! :-)