Beko HomeWhiz- Calibration mode!

Only works in new models!

[@neilladshead9308]

I’m so glad I found this video. We’ve just taken delivery of a Beko WTK104121A. The instruction booklet AND a supplementary sheet (stressing the point as an “important note for product installation”) both explain that “when you turn the product on for the first time, calibration mode must be run”. Considering that this is the first thing you have to do, these instruction barely even hint at how you’re supposed to do it. Without finding your video, I’m not sure I would’ve worked it out.

[@bogdannb]

I am glad I helped! :) Good luck with machine- Beko is AMAAAAZING☺️

[@Liedragon]

The controls differ on my model of WTL104121W there is no touchscreen, how are you supposed to turn off the spin?

[@neilladshead9308]

@@Liedragon Sorry, only just seen this. If I remember correctly, it was just a case of pressing the Spin button underneath the display. Hope you found it.

[@TheVelvetvoicecoach]

This is very helpful. The manual & insert should have a link to this video. Thanks. ☺

[@allex_only]

Amazing🤩🤩

[@bekohomewhiz1314]

Beko drum Clean Spin: 600rpm (2h 44m) No Spin (14m)

[@sophiejdalston]

Doh! Missed this completely when the machine was installed by AO three weeks ago, and of course their installers don't check for the extra bit of paper with tiny print on that say to run this before anything else, hopefully it will still calibrate in whatever way it is supposed to after 15+ washes have already been done in it. 😬

[@washinglover395]

So as I understand this helps the machine to understand how to accurately sense loads am i right?

[@bogdannb]

I guess so haha

[@alpitu21]

Oh so that's the "calibration mode"... Hmm.. i tried what Washerboy said in his hidden check mode thingy on a Beko Homewhiz pro version thingy (with eco 40-60), prewash and steamcure, it did nothing... Too bad this doesn't work in my arctic :(

[@nestervilaaz2008]

Thank you, good sir.

[@reabookreviews5470]

I have just tried this on mine but no water is entering the machine?

[@SamsungLad2005]

Nice

[@emrhn.k]

Hey , I immediately need an answer. Do we have to use dishwasher salt with Fairy capsules if water is hard ? I use fairy on Bosch dishwasher and sometimes I see lots of scratches on glasses and artillery. I don't choose very high temperatures and I leave blanks between dishes when placing them. And spray arms , filters are always shiny clean. What to do ? Could you please help me ? And if we have to use salt to soften the water , would salt and detergent together leave too much chemicals on dishes ?

[@whirlpool_addict_]

its best to use salt, it doesnt leave any chemicals as any dishwasher does a rinse after the washing part with detergent

[@bogdannb]

You must use salt! Doesnt matter what tablets you use. :) Salt does not have contact with dishes dont worry!

[@spiceboy162]

This program is for washer dryers to remove lint after drying. Exactly the same with Electrolux.

[@AegWasher1600]

no it’s not

[@amoxdnb]

Great, thank you for the video - I couldn't see anything in the instructions! :)

[@washersfan9003]

Fantastic🙃

[@bogdannb]

Yes😍

[@ugljesa93]

Hello! Could you exactly describe how to activate the calibration mode? And, is this the WUE8736 washer?

[@bogdannb]

Its not needed to do it. But if you want- turn washer on, hold prewash button until it shows 90°C 600rpm, then turn off spin. It will take 15 mins. Then start

[@ugljesa93]

@@bogdannb Any way to do it from the Homewiz app?

[@bogdannb]

@@ugljesa93 Dont think so.

[@ghighlandchieftain4462]

What happened to bosch washing machine and beko tumble dryer you had

[@bogdannb]

They are at home. This is washer and dryer in our new apartment where sisters are going to stay :) Basically moving from apartment where Indesit and Vox are

[@dadodadic5426]

Hello, I have a Beko washer dryer htv 8746 xf, can it be connected to the wirelles and turned on remotely

[@bogdannb]

Nope. You have to be near it as it uses bluetooth

[@dadodadic5426]

@@bogdannb thx

[@alpitu21]

Also what does it do after the calibration? Does it change the cycle times ? Please tell me lol

[@bogdannb]

Nope. Everything same🤣

[@alpitu21]

@@bogdannb ou But what does it calibrate

[@bogdannb]

@@alpitu21 Dunno🥲

[@kiwichic7398]

It calibrates its sensors which going forward allows the machine to judge the weight of your varying washing loads.

[@krunobrzi666]

I think it shortens the time... Beko WUE7611D XAW, the first 10 washes I didn't do that calibration, because I didn't know it had that function... I didn't see the special paper on which it says that... So before the calibration on the program "cotton 90°" , with an almost full drum, washing took 3:15 hours, and after calibration with the same amount of laundry, it takes 2:45 hours. I don't see any changes with the synthetics 40° program. I don't use other programs, so I can't say.

[@darrenlyons9495]

Hi do i have to calibrate a new beko wtl84151w washing machine after installation or is it for different models.thank you.

[@bogdannb]

It doesnt change anything so you dont have to :)

[@darrenlyons9495]

Ok thank you didn't rightly know,which slot does the liquid go into in the drawer.

[@crazy_washing7883]

Danas kada sam Isao u omega shop po grijac za nasu Beko susilicu vidio sam onu Slim susilicu i sokirso sam se kada sam je vidio nisam vjerovao da postoji Slim susilica

[@lisabruce6685]

I am currently 'callibrayting' my machine but obviously did it wrong as it's been on a three hour wash.. should I do it again properly?

[@Margineanvali]

You started the drum cleaning mode. It is no problem. You need to remember to turn the spin setting to “no spin” in order to calibrate

[@lisabruce6685]

@@Margineanvali Its ended the cycle now so I am just going to recalibrate it properly.. I think it will be ok

[@fizz1746]

So just a question, what does calibration mode actually do?

[@bogdannb]

Calibrates something… dont know what🥲

[@smurfiennes]

To accurately weigh your load

[@MieleW2573]

Nais🤩

[@rarespopa7116]

Interesting 😍🥰❤‍🔥❤‍🔥

[@aced.portgas4785]

BEKO best❤

[@kamkolev]

What is the model

[@Toppetytoptips]

Awesome, thank you for this explanation. The user manual doesn't explain well enough.

[@Motherboard686]

Wish WMBs had this feature, seeing how many cycles it has done is quite useful...

[@bogdannb]

It couldnt count with us hahahaha

[@andreear5567]

I am trying to follow these instructions but whenever I try to press on the SPIN button in order to wash with no spinning it doesn’t work 😢 it stays on 600 help!!!!

[@kiwichic7398]

Same here! Did you suss it out yet? I need to know how 😅

[@PunchbagFace]

Same here 😩

[@alpitu21]

1:25 excuse me distri drain?

[@CasamTheAnimator]

Is there a difference between service mode and calibration mode?

[@brunoshomelaundry2020]

Service mode is to test out all components in the machine, calibration is for better load sensing and water usage, thank me later

[@CasamTheAnimator]

@@brunoshomelaundry2020 Okay, so yeah there's actually a difference between service mode and calibration mode.

[@pedrosancho7975]

So you don't like Beko Slim machines. Why?

[@Bekowasher-cf5iv]

I subbed to your channel.

[@bogdannb]

😍

[@Bekowasher-cf5iv]

@@bogdannb Your welcome.

[@waschliebe8865]

Do I have to do this first or the first ever wash ?

[@bogdannb]

You dobt need to do it at all its not that important

[@cal87249]

Why water was so dirty?

[@juventisti100]

I have a problem, I have this washing machine model, but when it is running out or in the middle, it increases its duration, does this happen to anyone??

[@spiceboy162]

Yes, I noticed that my machine increases its duration but only in Eco 40-60 mode

[@vatanseven2009]

Beko is ❤

[@kamrankhan-ud5vd]

Ive got this machine 2 years running never calibrated once lol. I best do it tomorrow

[@bogdannb]

No need to. It doesnt help for anything haha

[@kamrankhan-ud5vd]

@@bogdannb haha, I know I just Wana do so I don't get left behind

[@hugojlsantos]

Calibration mode is to adjust the water that machine uses with the laundry weight. You won't see nothing but something is happening when the machine is washing

[@bekolaundry1400]

💗💗🥰🥰

[@eli55121]

has it been a while since they had this?

[@alpitu21]

No as mine doesnt have it

[@eli55121]

@@alpitu21 fair enough

[@Washerboy2006]

Think they only introduced this like a few months ago or less

[@eli55121]

@@Washerboy2006 oh okay

[@bogdannb]

Yes. Since few months ago. Aunts 8736 doesnt have this even though its same

[@moneyfalcon267]

mmm your back with ze beko vids..........now do a test mode (hint: ur most viewed)

[@_funny_guy_official._]

Oh I didn't know new bekos have that

[@bogdannb]

Me neither. Thanks to @washerboy2006 now we do :)

[@frooxiegamer]

I was thinking that this is only for tub cleaning. Will see when my new Beko wue8746n Aquatech arrive.

[@LasdilElizaga]

im eyeing for this brand. are they good?

[@pedrohenriquemarassi8618]

I have a Beko, and I wouldn’t recommend it, it vibrates too much.

[@LasdilElizaga]

@@pedrohenriquemarassi8618 did you check if it’s leveled properly? I just bought it 😭

[@washingmachine1757]

I'm shocked! My washing machine doesn't have calibration mode😩😩😩😩😩😩😩😩😩I can't understand why, it's not an old model…..🤕🤕I wanted to try on clothes to see what was going on😂😂

[@bogdannb]

New matte drum models have it🤣 yours has shinny drum! :)

[@washingmachine1757]

@@bogdannb oh

[@Washerboy2006]

wait WHAT 🤯🤯🤯 I never even realised you could select no spin on drum clean 😳 I thought it only calibrated on the main program lol 😂 mine lasts 15 minutes think I’ll do that on mine now and see if it’s the same as this 😅 (and also record the full cycle)

[@bogdannb]

Lets see if its the same as mine🤣

[@Lenardd]

I still don’t get what does calibration mode does 😳

[@bogdannb]

Calibrates something🤣

[@Brobbs4549]

My washer is boring I have a Bosch series 2

[@teknolojikadam1851]

Sorry turkıs model no calibration you mode test mode 🥺

[@amadoumbodji1427]

hi my machine go to pause every time can u help me

[@bogdannb]

My Beko dryer too… you need technician

[@oupaken3189]

My wre does not have that

[@bogdannb]

Older models dont :)

[@oupaken3189]

@@bogdannb oooooh that's the reason

[@teopas2007]

Which is purpose ?

[@bogdannb]

Calibrates something. Just like Samsung.

[@alpitu21]

@@bogdannb samsung i think calibrates drum position, water sensors and tachometer

[@ignatiousmary8413]

Cool.

[@ignatiousmary8413]

@alwl89 GOAWAY

[@ignatiousmary8413]

@alwl89 FOR THE LAST TIME I AM NOT A SPAMMER!!!!!! STOP HARASSING ME AND PLAY NSMB!!!!!!!!!!!

[@vladwibner]

Aeg vs overload

[@ovledo]

this is no calibration mode. It's cleaning drum mode. Do this every 2-3 month to clean and desinfect the drum

[@clareellis4906]

No this is different, Its for the calibration of the machine that is required before its first wash. Its in the instructions manual, its so the machine can sense the loads properly... thats why its only 15 mins. the drum cleaning programme is much longer, usually around 2 hours give or take depending on the machine...

[@darrenlyons9495]

Hi do I have to calibrate a new beko wtl84151w washing machine after installation.

[@bambithewasherfan6887]

I’m gonna tell you a story of about getting a new washing machine So we don’t have it yet but very soon we will We currently have a Samsung but the drain hose is clogged you might be thinking oh why not just unclog it We have actually been trying to unclog it but we are not able to so I think for are new washing machine we’re gonna get a beko too also I subscribed to you The only difference is we are not getting a dryer

[@Bekolover4ever]

Why are Beko always soo good? Would love to work for them to sell that best brand to the whole wide world 🌍

[@truthhurts4913]

Beko are the worst appliances you can get

[@krunobrzi666]

@@truthhurts4913 Why... what specifically is wrong with them... because I know a lot of people who have Beko refrigerators and washing machines, and they all work well... without some malfunctions that are no more frequent than with others... then what and why is wrong with them? New appliances from brands that were of the highest quality 20 or more years ago, today work worse and break down much more than that Beko, because they were all sold to Chinese corporations and install the last crappy components... the best example of that is Gorenje. I have a 3-year-old Gorenje refrigerator, which cools very poorly, and is very noisy, twice as noisy as the 20-year-old one. Only Elektrolux and Bosch may be better because they are not yet completely Chinese.

[@LasdilElizaga]

why@@truthhurts4913

[@diegolife1996]

🤌🏼

[@tomixtomix8532]

Jesam li u frci sto ovo nisam ucinio ?

[@bogdannb]

Ma jok haha

[@tomixtomix8532]

@@bogdannb Hvala na odgovoru - taman sam se prepao da nisam uradio nesto sto mora da se odradi .

[@bogdannb]

@@tomixtomix8532 Ma ne. Ovo od skoro ima :)

[@krunobrzi666]

@@bogdannb Samo da još više ne smanjuje razinu vode... jer i ovako vrti skoro pa na suho... na pranju jedva da se vidi voda na kraju bubnja. Ne znam dali je kod svih novih tako, jer sam do sad imao 23 godine staru Gorenje WA412, otišao je programator... pred 3 tjedna sam kupio Beko WUE7611D XA... i ne znam još kaj reć... jedino je dobro šta mogu sam dodat još malo, do litru vode kad ona završi svoje namakanje.

[@pegasusVehicles5264]

That's not strong clean because that takes 15 minutes

[@bogdannb]

This is calibration mode :) not wash